Omron HJ-320 Instruction Manual - Page 18

TROUBLESHOOTING TIPS Problem The low battery indicator blinks or appears continuously Probable Cause The battery is low or worn. Battery saving mode active. Nothing is displayed. The polarities of the battery (+ and -) are aligned in the wrong directions. The battery is worn The displayed values are incorrect. The unit is positioned incorrectly. Irregular movement. Inconsistent pace. Up and down movement. The set values are wrong. The display is unusual or the buttons do not operate normally. Device error. How to Correct Replace the battery with a new one (CR2032), refer to "BATTERY REPLACEMENT". Press either of , or , refer to "About the battery saving mode (sleep mode)" in "READING THE CURRENT DISPLAY". Insert the battery in correct alignement, refer to "BATTERY REPLACEMENT". Replace the battery with a new one (CR2032), refer to "BATTERY REPLACEMENT". Refer to "The unit may not count steps correctly in the following conditions:" in "USING THE UNIT". Check the settings, refer to "SETTINGS". Replace the battery with a new one (CR2032), refer to "BATTERY REPLACEMENT". Reinstall the battery, refer to "BATTERY REPLACEMENT". NOTE: If a malfuncion has occurred and you need to repair your unit, all settings and measurement results are deleted. We recommend that you record measurement results. 18