Onkyo C-SAT Owner Manual

Onkyo C-SAT Manual

Onkyo C-SAT manual content summary:

  • Onkyo C-SAT | Owner Manual - Page 1
    Using the Main Unit with Tuner Board Instruction Manual for ONKYO TX-NR1000 / Integra DTR-10.5 / Integra Research RDC-7.1 Thank you for purchasing the Tuner Board . When this optional board is inserted into option slot "K" on the main unit's rear panel, it can be used as the XM or
  • Onkyo C-SAT | Owner Manual - Page 2
    UPP UPP Installing Board 1 Power off the main unit, and then unplug the power cord from the AC outlet. 2 Remove the "K" sub-panel or board from the main unit to which you want to add on the optional board. I If any other slot is already used: Remove the hexagon screws, one top and one bottom
  • Onkyo C-SAT | Owner Manual - Page 3
    4 Insert the option board along the upper and lower guide rails. When the board hits the connector, T VIDEO IN Y PB CROEMNTORTOEL K B 100mA MAX. 1T2RVIGGER OUT A 200 mA MAX. C 100 mA MAX. apply a little more pressure
  • Onkyo C-SAT | Owner Manual - Page 4
    For a full listing of the XM commercial-free channels and advertising-supported channels, visit lineup.xmradio.com (US residents) or xmradio.ca ( residents). Only available in the 48 contiguous United States and Canada. ©2007 XM Satellite Radio Inc. All rights reserved. All other trademarks are the
  • Onkyo C-SAT | Owner Manual - Page 5
    compatible with the XM Satellite Radio system. Furthermore, the AMBE® voice compression software included in this product Satellite Radio, you need an XM Mini-Tuner and Home Dock, which includes a home antenna. These are sold separately. For connection information, refer to the instruction manual
  • Onkyo C-SAT | Owner Manual - Page 6
    button names Scroll wheel / / ENTER/Enter RETURN/Return DISPLAY/Display - CH +/- DIRECT TUNING and Number buttons / / ENTER/Enter * In this Instruction Manual, all the button names are essentially provided in capital letters. On some models, however, the names may be different and written in small
  • Onkyo C-SAT | Owner Manual - Page 7
    SAT Radio," and then press [ENTER]. 4 Use the [ ]/[ ] buttons to select "XM." None: Select if you're not using satellite radio. XM: Select to use XM Satellite Radio. SIRIUS: Select to use SIRIUS Satellite .xmradio.com Or call: 1-800-967-2346 For XM Canada, go to: http://xmradio.ca Or call: 1-877-GET
  • Onkyo C-SAT | Owner Manual - Page 8
    Selecting XM Radio Channels There are three ways to select XM radio channels: • Channel Search mode: select any channel. • Category Search mode: select channels by category. • Direct tuning: enter channel number. I Channel Search Mode 1 Press the [ENTER] or [TUNING MODE] button to select "Channel
  • Onkyo C-SAT | Owner Manual - Page 9
    Presetting XM Radio Channels You can store a combination of up to 40 of your favorite XM channels and AM/FM radio stations as presets. 1 Tune into the XM channel that you want to store as a preset. 2 Press the [MEMORY] button. The MEMORY indicator appears and the preset number flashes. 3 While the
  • Onkyo C-SAT | Owner Manual - Page 10
    available, "- - -" will be displayed instead. I Displaying XM Information on Your TV When you select a different XM channel, or the artist or song title changes, receive that channel, contact XM Satellite Radio. NO SIGNAL The XM Mini-Tuner can not receive the satellite signal. Check the XM antenna
  • Onkyo C-SAT | Owner Manual - Page 11
    : 1-800-967-2346 Canada: 1-877-438-9677 4 Adjust the position of the XM Mini-Tuner Antenna so that the Satellite signal strength bar is accordingly. 1 Press the [SETUP] button. 2 Use the [ ]/[ ] buttons to select "SAT Radio Setup," and then press [ENTER]. 3 Use the [ ]/[ ] buttons to select "
  • Onkyo C-SAT | Owner Manual - Page 12
    SIRIUS is available in the US for subscribers with addresses in the continental US and is available in Canada for subscribers with a Canadian address. To Get SIRIUS Satellite Radio a subscription and compatible tuner and antenna are required and sold separately. Visit sirius.com for the most
  • Onkyo C-SAT | Owner Manual - Page 13
    cable, and an AC power adapter. See the SiriusConnect Home tuner's instructions for more information. Use the 8-pin mini DIN connector cable to away from any overhead obstructions. Positioning the Antenna For a consistent satellite signal, the antenna must be positioned correctly. Use the following
  • Onkyo C-SAT | Owner Manual - Page 14
    remote controller supplied with your main unit to perform Sirius Satellite Radio operations. Button names may vary depending on the CH +/- DIRECT TUNING and Number buttons / / ENTER/Enter * In this Instruction Manual, all the button names are essentially provided in capital letters. On some models
  • Onkyo C-SAT | Owner Manual - Page 15
    SiriusConnect Home tuner package. 1 Press [SETUP] button. 2 Use the [ ]/[ ] buttons to select "SAT Radio Setup," and then press [ENTER]. 3 Use the [ ]/[ ] buttons to select "Sirius ID," and then press [ENTER]. Your SIRIUS Satellite Radio ID number is displayed. Write it below. ID 4 To sign up, go to
  • Onkyo C-SAT | Owner Manual - Page 16
    dial to select a category, and use the CONTROL/TUNING dial to select a channel in that category. I Direct Tuning You can select a SIRIUS Satellite Radio channel directly by entering its number by remote controller. 1 Press the [DIRECT TUNING] button. 2 Within 8 seconds, use the number buttons to
  • Onkyo C-SAT | Owner Manual - Page 17
    to store the channel. The channel is stored and the preset number stops flashing. Repeat this procedure for all of your favorite SIRIUS Satellite Radio channels. I Deleting Presets 1 Select the preset that you want to delete. See the previous section. 2 While holding down the [MEMORY] button, press
  • Onkyo C-SAT | Owner Manual - Page 18
    "- - -" will be displayed instead. I Displaying Sirius Information on Your TV When you select a different Sirius channel, or the artist or song title [DISPLAY] button. I SIRIUS Satellite Radio Messages The following messages may appear while using SIRIUS Satellite Radio. ❑ ACQUIRING SIGNAL The
  • Onkyo C-SAT | Owner Manual - Page 19
    "Antenna Aiming," and then press [ENTER]. 4 Adjust the position of the SiriusConnect Home antenna so that the SAT signal strength bar is as long as possible. If you can't receive a satellite signal, adjust your antenna so that the Terrestrial signal strength bar is as long as possible. Terrestrial
  • Onkyo C-SAT | Owner Manual - Page 20
    Parental Lock You can lock out channels that you do not want to receive. 1 Press the [SETUP] button. 2 Use the [ ]/[ ] buttons to select "SAT Radio Setup," and then press [ENTER]. 3 Use the [ ]/[ ] buttons to select "Parental Lock," and then press [ENTER]. "Enter Code : " appears on the display.
  • Onkyo C-SAT | Owner Manual - Page 21
    Changing the PIN Number 1 Press the [SETUP] button. 2 Use the [ ]/[ ] buttons to select "SAT Radio Setup," and then press [ENTER]. 3 Use the [ ]/[ ] buttons to select "Parental Lock," and then press [ENTER]. 4 Enter the PIN number. For operation, refer to
  • Onkyo C-SAT | Owner Manual - Page 22
    . 1. Frequency and Listening mode (If available, Program Service Name will be displayed) 2. Radio Text (if Radio Text available) 3. Program Type Listening to the RDS Radio For information on how to connect FM antenna and to tune, refer to the Instruction Manual for your main unit. The RDS indicator
  • Onkyo C-SAT | Owner Manual - Page 23
    Memo 23
  • Onkyo C-SAT | Owner Manual - Page 24
    SN 29344328 (C) Copyright 2007 ONKYO CORPORATION Japan. All rights reserved. En Printed in Japan D0704-1 * 2 9 3 4 4 3 2 8 2*4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

1
Using the Main Unit with <C-SAT> Tuner Board
Instruction Manual for ONKYO TX-NR1000 / Integra DTR-10.5 / Integra Research RDC-7.1
Thank you for purchasing the Tuner Board <C-SAT>. When this optional board is inserted into option slot “K” on the main unit’s
rear panel, it can be used as the XM or SIRIUS/FM Stereo/AM tuner terminal. Furthermore, <C-SAT> becomes capable of
supporting RDS.
Usage varies depending on the main unit to which you want to add the optional board. Refer to the user’s manual that comes with
your main unit before starting operations.
Caution:
Before connecting or disconnecting the board, make sure to power off the main unit, and then unplug the power cord from the
AC outlet. Connecting or disconnecting the board while power is being supplied to the main unit may cause failure.
Plug the optional board into the individual designated slot. Plugging it into the wrong slot may cause failure.
Verify the following items are included in the package:
Supplied Accessories
Board
Allen wrench (1 EA)
Hand screws for
removing board
Hexagon
screws
FM antenna
AM antenna
For some main units, instructions may be provided in the user’s manual. In this case, please find instructions in the manual
that comes with your main unit.
C-SAT.fm 1 ページ 2007年3月29日
木曜日
午前11時47分