Onkyo CS-1045 R-1045 User Manual English

Onkyo CS-1045 R-1045 Manual

Onkyo CS-1045 R-1045 manual content summary:

  • Onkyo CS-1045 R-1045 | User Manual English - Page 1
    the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new R-1045/C-1045. Please retain this manual for future reference. Clock and Timer 55 Miscellaneous 62 How to reset to factory default? 62 Troubleshooting 62 Specifications
  • Onkyo CS-1045 R-1045 | User Manual English - Page 2
    the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near
  • Onkyo CS-1045 R-1045 | User Manual English - Page 3
    Precautions 1. Recording Copyright-Unless it's for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse-The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care-
  • Onkyo CS-1045 R-1045 | User Manual English - Page 4
    ". So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in
  • Onkyo CS-1045 R-1045 | User Manual English - Page 5
    rates 8 k, 16 k, 32 k, 11.025 k, 22.05 k, 44.1 k, 12 k, 24 k and 48 kHz. • Supports bit rates 8 to 320 kbps and VBR (Variable Bit Rate). * WMA*3 decoder • Supports WMA Ver. 9 standard. • Does not support DRM. • Supports sample rates 8 k, 16 k, 32 k, 11.025 k, 22.05 k, 44.1 k, 12 k, 24 k and 48 kHz
  • Onkyo CS-1045 R-1045 | User Manual English - Page 6
    Supplied Accessories Make sure you have the following accessories: Remote controller and two batteries (R03/AAA) The battery is not supplied with products for China. Indoor FM antenna AM loop antenna DAB antenna (R-1045DAB) Coaxial digital audio cable (1 m) cable (80 cm) • To use , the CD Player
  • Onkyo CS-1045 R-1045 | User Manual English - Page 7
    Contents Getting Started Important Safety Instructions 2 Precautions 3 Features 5 Supplied Accessories Manually 56 Using the Timers 57 About the Timers 57 Programming the Timers 58 Turning Timers On and Off 60 Checking Timer Settings 60 Using the Sleep Timer 61 Miscellaneous Troubleshooting
  • Onkyo CS-1045 R-1045 | User Manual English - Page 8
    Before Using the Stereo Receiver Installing the Batteries 1 To open the battery compartment, press the small hollow and slide open the cover. Using the Remote Controller When you operate the remote controller, point it at the stereo receiver's remote control sensor, as shown below. Remote control
  • Onkyo CS-1045 R-1045 | User Manual English - Page 9
    Getting to Know the Stereo Receiver and CD Player Names of Each Part (Stereo Receiver) Front Panel STANDBY LED DISPLAY VOLUME ON/STANDBY iPod/USB MODE/RETURN Rear Panel MULTI JOG INPUT BASS/TREBLE/BALANCE -/+ DIRECT DIRECT LED PHONES AM ANTENNA DAB ANTENNA R-1045DAB only OPTICAL GND SPEAKERS
  • Onkyo CS-1045 R-1045 | User Manual English - Page 10
    Getting to Know the Stereo Receiver and CD Player-Continued Names of Each Part (CD Player) Front Panel ON/STANDBY Disc tray Open/Close[ ] button [ ]/[ ] buttons STANDBY LED Rear Panel Display Pause [ ] button Stop [ ] button Play [ ] button ANALOG AUDIO OUTPUT DIGITAL AUDIO OUTPUT COAXIAL REMOTE
  • Onkyo CS-1045 R-1045 | User Manual English - Page 11
    Getting to Know the Stereo Receiver and CD Player-Continued Display R-1045/1045DAB SLEEP indicator Play [ ] and pause [ ] indicators USB indicator File format indicators MP3 WMA PCM FOLDER indicator DIRECT indicator FILE indicator MUTING indicator Playback mode indicators 1FOLDER MEMORY RANDOM C-
  • Onkyo CS-1045 R-1045 | User Manual English - Page 12
    Getting to Know the Stereo Receiver and CD Player-Continued Remote Controller 12
  • Onkyo CS-1045 R-1045 | User Manual English - Page 13
    Getting to Know the Stereo Receiver and CD Player-Continued ON/STANDBY Used to set the stereo receiver to On or Standby. SLEEP Used to set and release the setting and display the status of sleep timer. DIMMER Used to change the display brightness. DISPLAY Used to indicate the CD or USB elapsed time
  • Onkyo CS-1045 R-1045 | User Manual English - Page 14
    on a CD-R/CD-RW can be played with this CD player. • Use discs which have been recorded following the ISO9660 Level 2 file system. (The supported directory depth is eight levels, the same as ISO9660 Level 1) Discs recorded with the hierarchical file system (HFS) cannot be played. • Up to 99 folders
  • Onkyo CS-1045 R-1045 | User Manual English - Page 15
    Disc Notes-Continued Handling Discs Hold discs by the edge, or by the center hold and edge. Avoid touching the playback surface (surface with nothing printed on it). Label surface (printed surface) Playback surface Do not attach paper or stickers, or write on the playback or label surface of the
  • Onkyo CS-1045 R-1045 | User Manual English - Page 16
    Connecting the CD Player C-1045 Connections • Don't connect the power cord until you've completed and double-checked all connections. • Use the coaxial cable included in the package. The analog audio cable can be used instead. • Push plugs in all the way to make good connections (loose connections
  • Onkyo CS-1045 R-1045 | User Manual English - Page 17
    Connecting Antennas This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The receiver won't pick up any radio signals without an antenna connected, so you must connect the antenna to use the
  • Onkyo CS-1045 R-1045 | User Manual English - Page 18
    . „ Using a TV/FM Antenna Splitter It's best not to use the same antenna for both FM and TV reception, as this can cause interference problems. If circumstances demand it, use a TV/FM antenna splitter, as shown. Outdoor AM antennas work best when installed horizontally outside, but good results can
  • Onkyo CS-1045 R-1045 | User Manual English - Page 19
    Connecting Speakers Connecting Your Speakers • Connect the right speaker to the stereo receiver's right (R) SPEAKERS terminals. Connect the left speaker to the left (L) SPEAKERS terminals. • Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the stereo
  • Onkyo CS-1045 R-1045 | User Manual English - Page 20
    Connecting Other Components About Connections Cables and Jacks No connecting cables are included with the stereo receiver. Cable Analog audio cable Optical digital audio cable COAXIAL digital audio cable Jack R L Description This cable carries analog audio. This cable carries digital audio.
  • Onkyo CS-1045 R-1045 | User Manual English - Page 21
    Connecting Other Components-Continued Connecting a Digital Playback Component Notes • The unit supports 16/24 bit, 32/44.1/48/96 kHz PCM signal digital input. • Inputting an incompatible signal may result in noise. • Do not input a DTS-CD
  • Onkyo CS-1045 R-1045 | User Manual English - Page 22
    on the stereo receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the stereo receiver into a different branch circuit. • To set the clock with the AccuClock function, the stereo receiver must be able to
  • Onkyo CS-1045 R-1045 | User Manual English - Page 23
    If for some reason the clock cannot be set automatically, see "Setting AccuClock to Using a Specific Station" on page 55 and "Setting the Clock Manually" on page 56. Notes To cancel this function while "Wait..." is displayed, use the [INPUT] knob, press [MODE/RETURN] button, or MULTI JOG controller
  • Onkyo CS-1045 R-1045 | User Manual English - Page 24
    First Time Setup-Continued Setting APD (Auto Power Down) This section explains how to set APD (Auto Power Down) function to set the R-1045/R1045DAB and C-1045. „ R-1045/R-1045DAB It is basically activated when no sound or control is output from/to the receiver for 30 minutes continuously. It is
  • Onkyo CS-1045 R-1045 | User Manual English - Page 25
    Basic Operations STANDBY LED VOLUME ON/STANDBY Turning On the Stereo Receiver Stereo receiver Remote controller INPUT PHONES Adjusting the Volume Stereo receiver Remote controller To turn on the stereo receiver, press the [ON/ STANDBY] button on the stereo receiver or the remote controller.
  • Onkyo CS-1045 R-1045 | User Manual English - Page 26
    Basic Operations-Continued Using Headphones Turn down the volume, then connect your stereo headphones to the [PHONES] minijack. You can adjust the volume and mute the sound, by using the [VOLUME] control. The speakers output no sound while the headphones are connected. PHONES jack Notes When you
  • Onkyo CS-1045 R-1045 | User Manual English - Page 27
    Disc Playback Disc tray / 1 Press the Open/Close [ ] button to open the disc tray. 2 Place the CD on the tray with the label-side facing up. When you want to listening to the 8 cm CD, place it in the center of the tray. 3 To start playback, press the Play [ ] button. The disc tray closes
  • Onkyo CS-1045 R-1045 | User Manual English - Page 28
    Disc Playback-Continued Using the Remote Controller DISPLAY button Press to display more CD information [ ]/[ ] buttons Selects the last or next track [ ]/[ ] buttons During playback, fast forwards or fast reverses the track. Use the number buttons as shown in the examples below to select tracks
  • Onkyo CS-1045 R-1045 | User Manual English - Page 29
    ) For MP3/WMA CDs, files (MP3/WMA files) may be organized in a hierarchically, with folders containing files and subfolders, as shown below. • In this manual, MP3/WMA files are referred to as files. • Likewise, folders (directories) are referred to as folders. If you don't select a specific MP3/WMA
  • Onkyo CS-1045 R-1045 | User Manual English - Page 30
    Disc Playback-Continued Selecting Files in Navigation Mode In Navigation mode, you can select files by navigating through the folder hierarchy. This mode can only be used while playback is stopped. Selecting Files in All Folder Mode In All Folder mode, you don't have to navigate the folder
  • Onkyo CS-1045 R-1045 | User Manual English - Page 31
    Disc Playback-Continued 3 Press the [ ] button. The first file name inside the folder appears. Use the [ ]/[ ] buttons to select the files within the folder. • To select another folder, press the [ ] button again, and then use the [ ]/ [ ] buttons to select it. • To cancel the procedure at any point
  • Onkyo CS-1045 R-1045 | User Manual English - Page 32
    Disc Playback-Continued Displaying MP3/WMA Information You can display various information about the MP3/ WMA file currently playing, including ID3 tags such as title name, artist name, and album name. During playback, press the [DISPLAY] button repeatedly to display the following MP3/WMA
  • Onkyo CS-1045 R-1045 | User Manual English - Page 33
    Various Playback Modes You can select the following playback modes: • Random playback • Memory playback • Repeat playback Random Playback In random playback, all of the files on the disc are played in random order. RAMDOM Memory Playback (For Audio CDs) In memory playback, you can create a
  • Onkyo CS-1045 R-1045 | User Manual English - Page 34
    Various Playback Modes-Continued Notes • If the total playing time is more than 99 minutes and 59 seconds, "- -:- -" appears. • You can add up to 25 files to the playlist. If you try to add more, the message "MEM FULL" appears. To Change the Display While the memory setting operations, press the [
  • Onkyo CS-1045 R-1045 | User Manual English - Page 35
    Various Playback Modes-Continued 7 Press the Play [ ] button. Memory playback starts. Memory Playback in All Folder Mode 1 Press the [MEMORY] button, then the MEMORY indicator appears. 2 Press the [ ] button. The CD Player enters All Folder mode and "1-" appears on the display. 3 Use the [ ]/[ ]
  • Onkyo CS-1045 R-1045 | User Manual English - Page 36
    SVD data or treats the disc as an ISO 9660 disc. Normally, this preference doesn't need to be changed. SVD (Supplementary Volume Descriptor) supports long file and folder names and characters other than letters and numbers. HIDE NUMBER (Disable/Enable) This preference determines whether or not the
  • Onkyo CS-1045 R-1045 | User Manual English - Page 37
    Setting for MP3/WMA-Continued The following table shows a few examples of numbered file and folder names and how they will appear with the DISABLE and ENABLE options. File/folder name 01 POPS 10-ROCK 16_JAZZ 21TH CENTURY 05-07-20 ALBUM DISABLE 01 POPS 10-ROCK 16_JAZZ 21TH CENTURY 05-07-20 ALBUM
  • Onkyo CS-1045 R-1045 | User Manual English - Page 38
    iPod / iPhone Playback Before using your iPod/iPhone with the stereo receiver, be sure to update your iPod/iPhone with the latest software, available from the Apple Web site. If you leave your iPod/iPhone paused when using it on its own, eventually it will go into hibernation. If you connect it to
  • Onkyo CS-1045 R-1045 | User Manual English - Page 39
    iPod / iPhone Playback-Continued Playing iPod/iPhone 1 Connect your iPod/iPhone to the USB connector on the front panel of the stereo receiver using the USB cable. Notes • Once you have connected the iPod / iPhone to the stereo receiver, no sound heard through headphones if you connect it to the [
  • Onkyo CS-1045 R-1045 | User Manual English - Page 40
    USB Playback This section explains how to play music files on a USB Flash device. Connect a USB Flash device as shown below. iPod/USB DISPLAY iPod/USB 1 Insert USB Flash device. 2 Select "USB" using the [USB] button on the remote controller or the [INPUT] knob on the stereo receiver. • When no USB
  • Onkyo CS-1045 R-1045 | User Manual English - Page 41
    USB Playback-Continued Random Playback With random playback, all of the music files on the USB Flash device are played in random order. RAMDOM Select the type of Repeat Playback When playing back USB Flash device music files, all files on the USB Flash device will be played according to repeat
  • Onkyo CS-1045 R-1045 | User Manual English - Page 42
    USB Playback-Continued Displaying MP3/WMA/AAC Information You can display various information about the MP3/ WMA/AAC files currently playing, including ID3 tags such as title, artist name, and album name. DISPLAY During playback, press the [DISPLAY] button repeatedly to display the following music
  • Onkyo CS-1045 R-1045 | User Manual English - Page 43
    FM/AM stations If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono. Adjusting the Antennas Adjusting and installing the antenna Choose a location for the antenna while listening to
  • Onkyo CS-1045 R-1045 | User Manual English - Page 44
    . It was developed within the European Broadcasting Union (EBU) and many European FM radio stations use it these days. The stereo receiver supports and displays the Program Service Name (PS) and Radio Text (RT) types of RDS data. The RDS indicator appears on the display when the stereo receiver is
  • Onkyo CS-1045 R-1045 | User Manual English - Page 45
    that was detected is selected. Using the Scan Function Manually If a new DAB station is introduced, or you move to a new area , you can run the Auto Tuning function manually. 1 Press the [MENU/NO] button. 2 Use the Previous and Next [ ]/[ ] buttons
  • Onkyo CS-1045 R-1045 | User Manual English - Page 46
    is selected, a left angle bracket (
  • Onkyo CS-1045 R-1045 | User Manual English - Page 47
    and then press [ ]. The items are explained below. „ Preset Write? Select this to preset the current DAB station. See "Presetting FM/DAB Stations Manually" on page 49 for more information. „ Tuning Mode? With this setting, you can sort the available stations alphabetically, by multiplex, or active
  • Onkyo CS-1045 R-1045 | User Manual English - Page 48
    stations available in your area in one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. TUNER / MENU/NO Caution Any existing presets will be deleted when the Auto Preset function is run. 1 Press
  • Onkyo CS-1045 R-1045 | User Manual English - Page 49
    select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. FM stations can also be preset more radio stations. Notes If the current FM station supports RDS and PS (Program Service Name), the station's name will be displayed instead of the
  • Onkyo CS-1045 R-1045 | User Manual English - Page 50
    Listening to the Radio-Continued After Storing Presets You Can: • Select them (see page 50) • Name them for easy identification (see page 51) • Copy them (see page 52) • Erase them (see page 54) Selecting Preset Stations You must store some presets before you can select them (see pages 48 to 49).
  • Onkyo CS-1045 R-1045 | User Manual English - Page 51
    Listening to the Radio-Continued Naming Presets You can name presets for easy identification. The preset name may contain of up to eight characters. DISPLAY MENU/NO / MODE/YES Number buttons CLEAR 1 Select the preset number you want to name (see page 50). 2 Press the [MENU/NO] button, and
  • Onkyo CS-1045 R-1045 | User Manual English - Page 52
    Listening to the Radio-Continued 6 When you've finished entering the name, press the [MODE/YES] button. The preset is named and "Complete" appears on the display. You can also use the front panel controls. 1 Select the preset you want to name (see page 50). 2 Push the [MULTI JOG] control, and then
  • Onkyo CS-1045 R-1045 | User Manual English - Page 53
    Listening to the Radio-Continued 5 To copy the preset, press [ ]. If no station has yet been stored in the destination preset, the station is copied and "Complete" appears. If a station has already been stored in the destination preset, the message "Overwrite?" appears. Erasing a Preset's Name
  • Onkyo CS-1045 R-1045 | User Manual English - Page 54
    Listening to the Radio-Continued Erasing Presets MENU/NO / MODE/YES 1 Select the preset you want to erase (see page 50). 2 Press the [MENU/NO] button, and then use the Previous and Next [ ]/[ ] buttons to select "PresetErase?". 3 Press [ ] or [MODE/YES]. A message requesting confirmation appears.
  • Onkyo CS-1045 R-1045 | User Manual English - Page 55
    station the which AccuClock function uses. This must be an FM station that supports RDS CT (Clock Time) information. 1 Press the [TIMER] button. correctly, specify another FM station and try again or set the clock manually (see page 56). • The AccuClock function automatically updates the clock every
  • Onkyo CS-1045 R-1045 | User Manual English - Page 56
    Previous and Next [ ]/[ ] buttons to select "ManualAdjust". Can also be controlled using the [MULTI JOG] control. 4 Press [ ]. 6 Press [ ]. To cancel the Manual Adjust function at this point, press the [MENU/NO] button. 7 Use the Previous and Next [ ]/ [ ] (1step) or [ ]/[ ] (scan) buttons to set
  • Onkyo CS-1045 R-1045 | User Manual English - Page 57
    Using the Timers The stereo receiver has five timers: four programmable timers for automated playback or recording, and a sleep timer for turning the stereo receiver off after a specified period. The timers can be used with C-1045 that are connected to the stereo receiver via (see page 16 for hookup
  • Onkyo CS-1045 R-1045 | User Manual English - Page 58
    Using the Timers-Continued Programming the Timers Notes • You must set the clock before you can program the timers. • Before programming a timer to turn on the radio, you must preset the station you want to use. (See pages 48 to 49.) • If you don't operate any buttons for 60 seconds while
  • Onkyo CS-1045 R-1045 | User Manual English - Page 59
    Using the Timers-Continued 7 If you selected "Days Set", use the Previous and Next [ ]/[ ] buttons to select the first day, and then press [ ]. Use the Previous and Next [ ]/ [ ] buttons again to select the last day, and then press [ ]. You can select only consecutive days. 8 Use the Previous
  • Onkyo CS-1045 R-1045 | User Manual English - Page 60
    Using the Timers-Continued Turning Timers On and Off Once a timer has been programmed, you can turn it on or off as necessary. For example, while you're on holiday, you may want to turn off the timer you use as an earlymorning alarm. TIMER / MENU/NO Checking Timer Settings 1 Press the [TIMER]
  • Onkyo CS-1045 R-1045 | User Manual English - Page 61
    Using the Timers-Continued Using the Sleep Timer With the sleep timer, you can set the stereo receiver so that it automatically turns off after a specified period. SLEEP Press the [SLEEP] button repeatedly to select the required sleep time. With the [SLEEP] button, you can set the sleep time from 90
  • Onkyo CS-1045 R-1045 | User Manual English - Page 62
    Troubleshooting „ How to reset to factory default? R-1045/R-1045DAB If you have any trouble using the stereo receiver, look for a resetting the stereo receiver will delete your custom settings. C-1045 If you have any trouble using the CD Player, look for a solution in this section. If you can't
  • Onkyo CS-1045 R-1045 | User Manual English - Page 63
    Troubleshooting-Continued The sound quality is not good. • Make sure the speaker cables sound. • This may be due to dirty contacts. Clean the headphones plug. See your headphones' instruction manual for cleaning information. Also, make sure that the headphones cable is not broken or damaged. • The
  • Onkyo CS-1045 R-1045 | User Manual English - Page 64
    Troubleshooting-Continued CD Player SETUP Can't find a SETUP menu in need. • If any Class. • Check that the memory format is FAT16 or FAT32. • USB Flash devices with an internal USB hub are not supported. Can't play MP3/WMA/AAC files. • MP3/WMA/AAC files without a ".MP3/.WMA/.AAC" or ".mp3/.wma/.aac
  • Onkyo CS-1045 R-1045 | User Manual English - Page 65
    Troubleshooting-Continued iPod/iPhone There's no sound. • Make sure that the iPod is connected to the receiver properly. • Make sure that no video content is being
  • Onkyo CS-1045 R-1045 | User Manual English - Page 66
    Troubleshooting-Continued Clock Can't set the clock. • You cannot set the clock if USB is selected by the input selector. Timers Timer playback doesn't work. • Make
  • Onkyo CS-1045 R-1045 | User Manual English - Page 67
    Specifications R-1045 / R-1045DAB Amplifier Section Rated Output Power (IEC) 2ch ×70 W at 4 ȍ, 1 kHz, 2ch Driven THD (Total Harmonic Distortion) 0.08 % (1kHz 1W) Damping Factor 35 (Front, 1 kHz, 8 ȍ) Input Sensitivity and Impedance 115 mV/33 kȍ (LINE) 2.0 mV/47 kȍ (PHONO MM) Output
  • Onkyo CS-1045 R-1045 | User Manual English - Page 68
    Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

Contents
Getting Started
2
Connections
16
Basic Operations
25
Disc Playback
27
iPod/iPhone Playback
38
USB Playback
40
Listening to the Radio
43
Clock and Timer
55
Miscellaneous
62
How to reset to factory default?
62
Troubleshooting
62
Specifications
67
E
n
CD Mini HiFi Components
Instruction Manual
PHA-1045DAB
R-1045 (Stereo Receiver)
C-1045 (CD Player)
R-1045DAB (Stereo Receiver)
C-1045 (CD Player)
PHA-1045
Thank you for purchasing an Onkyo R-1045 Stereo
Receiver and C-1045 CD Player.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new R-1045/C-1045.
Please retain this manual for future reference.