Onkyo HT-R530 Owner Manual - Page 48
Speaker Configuration
View all Onkyo HT-R530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
)54@&OCPPL 1BHF .POEBZ 'FCSVBSZ 1. Advanced Setup-Continued Speaker Configuration, Crossover Frequency, 4 and Double Bass settings only need to be changed if you're not using the speakers in this package. Speaker Configuration This section explains how to specify which speakers are connected and their sizes. For speakers with a cone diameter larger than 6-1/2 inches (16 cm), specify Large. For those with a smaller diameter, specify Small. 5 Cone diameter 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. 2 Use the Up and Down [ ]/[ ] buttons to select "1. Speaker Config," and then press the [ENTER] button. 6 3 While the Subwoofer setting is selected, use the Left and Right [ ]/[ ] buttons to select Yes or No. Yes: Select if a subwoofer is con- nected. No: Select if no subwoofer is con- nected. Use the Down [ ] button to select "Front," and then use the Left and Right [ ]/[ ] buttons to select Small or Large. Small: Select if the front speakers are small. Large: Select if the front speakers are large. Note: • If the Subwoofer setting in step 3 is set to No, this setting is fixed at Large and does not appear. Use the Down [ ] button to select "Center," and then use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the center speaker is small. Large: Select if the center speaker is large. None: Select if no center speaker is connected. Note: • If the Front setting in step 4 is set to Small, the Large option cannot be selected. Use the Down [ ] button to select "Surround," and then use the Left and Right [ ]/[ ] buttons to select Small, Large, or None . Small: Select if the surround speak- ers are small. Large: Select if the surround speak- ers are large. None: Select if no surround speakers are connected. Note: • If the Front setting in step 4 is set to Small, the Large option cannot be selected. 48