Onkyo HT-R591 Owners Manual

Onkyo HT-R591 Manual

Get Onkyo HT-R591 PDF manuals and user guides View all Onkyo HT-R591 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo HT-R591 manual content summary:

  • Onkyo HT-R591 | Owners Manual - Page 1
    AV RECEIVER HT-R591 Instruction Manual Contents Safety Information and Introduction 2 Table of Contents 5 Connections 11 Turning On & Basic Operations 19 Advanced Operations 39 Controlling Other Components 53 Appendix 59 Speaker Package En
  • Onkyo HT-R591 | Owners Manual - Page 2
    servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away
  • Onkyo HT-R591 | Owners Manual - Page 3
    Preventing Hearing Loss Caution Excessive sound pressure from earphones and headphones this unit, have it checked by your Onkyo dealer. 8. Handling Notes • If you a long time, it may not work properly the next time you turn it on, so be sure to accordance with the instructions, may cause harmful
  • Onkyo HT-R591 | Owners Manual - Page 4
    two batteries (AA/R6) Quick Start Guide * In catalogs and on packaging, the If the remote controller doesn't work reliably, try replacing the batteries. Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual
  • Onkyo HT-R591 | Owners Manual - Page 5
    and Introduction Appendix Troubleshooting 59 Connection Tips and Video Signal Path 64 Using an RIHD-compatible TV, Player, or Recorder 65 About HDMI 67 USB Features 68 License and Trademark Information 69 Specifications 70 To reset the AV receiver to its factory defaults, turn it on and
  • Onkyo HT-R591 | Owners Manual - Page 6
    bit Processing DSP • Jitter Cleaning Circuit Technology Connections • 4 HDMI Inputs and 1 Output • Onkyo Q for System Control • 4 Digital Inputs (2 Optical/2 40 FM/AM Presets • Audyssey 2EQ® to correct room acoustic problems • Audyssey Dynamic EQ® for loudness correction • Audyssey Dynamic Volume®
  • Onkyo HT-R591 | Owners Manual - Page 7
    (Asian models) O W PQ R S T UV For detailed information, see the pages in parentheses. B ON/STANDBY button (19) C HDMI THRU indicator (49) D SUBWOOFER LEVEL buttons (51) E Remote control sensor (4) F LISTENING MODE buttons (30) G Display (8) H DIMMER button (North American and
  • Onkyo HT-R591 | Owners Manual - Page 8
    Display BC D For detailed information, see the pages in parentheses. B HDMI indicator (49, 64) C M.Opt indicator (37, 52) D Listening mode and format indicators (30, 48) E Audyssey indicator (27, 46) Dynamic EQ indicator (46) Dynamic Vol indicator (
  • Onkyo HT-R591 | Owners Manual - Page 9
    (Brazilian models) G L H I J K B DIGITAL IN COAXIAL and OPTICAL jacks C COMPONENT VIDEO IN and OUT jacks D HDMI IN and OUT jacks E FM ANTENNA jack and AM ANTENNA terminal F SUBWOOFER PRE OUT jack G Power cord (North American and Asian models) H VREMOTE CONTROL jack I Composite video and
  • Onkyo HT-R591 | Owners Manual - Page 10
    *1 BE F G CH ID J K E L M To control the AV receiver, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See "Entering Remote Control Codes" for more details (➔ page 55). For detailed information
  • Onkyo HT-R591 | Owners Manual - Page 11
    Connecting the AV Receiver Connecting Your Speakers Connecting the Speaker Cables The following illustration shows how to connect the speakers to each pair of terminals. If you're using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals. Tip • You can specify
  • Onkyo HT-R591 | Owners Manual - Page 12
    subwoofer is recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings automatically (➔ page 27) or manually outlet before making any connections. • Read the instructions supplied with your speakers. • Pay close attention
  • Onkyo HT-R591 | Owners Manual - Page 13
    music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results. Tip • If your subwoofer is unpowered and you're using an external amplifier, connect the subwoofer pre out jack to an input on the amplifier
  • Onkyo HT-R591 | Owners Manual - Page 14
    any AV connections, read the manuals supplied with your AV components connections allow you to enjoy digital sound such as PCM*1, Dolby Digital or supported sampling rates are 32/44.1/48/88.2/96 kHz. With HDMI connections, 176.4 and 192 kHz are also supported. Note • The AV receiver does not support
  • Onkyo HT-R591 | Owners Manual - Page 15
    the AV receiver to standby mode. Note • In the case of Blu-ray Disc/DVD players, if no sound is output despite following the above-mentioned procedure, set your Bluray Disc/DVD player's HDMI audio settings to PCM. ■ Audio Return Channel (ARC) function Audio Return Channel (ARC) function enables an
  • Onkyo HT-R591 | Owners Manual - Page 16
    The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver head amp or MC transformer as well as a phono preamp. See your turntable's manual for details. • With connection %, you can enjoy Dolby Digital and DTS. •
  • Onkyo HT-R591 | Owners Manual - Page 17
    is on standby, the AV receiver will automatically turn on and select that component as the input source support all V functions. Refer to the manuals supplied with your other Onkyo connected to a composite video output. • The surround sound and DSP listening modes cannot be recorded. • Copy
  • Onkyo HT-R591 | Owners Manual - Page 18
    power cord, connect all of your speakers and AV components. • Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit. • Do not use
  • Onkyo HT-R591 | Owners Manual - Page 19
    on the front panel. or Press RECEIVER followed by  on the remote controller. The AV receiver comes on, and its display lights. Turning On & Basic Operations Turning Off 1 Press ON/STANDBY on the front panel. or Press RECEIVER followed by  on the remote controller. The AV receiver will enter
  • Onkyo HT-R591 | Owners Manual - Page 20
    menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, "Controlling Other Onkyo Components" (➔ page 55) 3 To adjust the volume, use VOL R/X. 4 Select a listening mode and enjoy! See also: • "Using the Listening Modes" (➔ page 30) Turning On &
  • Onkyo HT-R591 | Owners Manual - Page 21
    TOP MENU This button displays the top menu for each media or service. C R/X and ENTER These buttons navigate through the menus. F/S Mode during iPod/iPhone playback. Turning On & Basic Operations P RANDOM modes. Tip • See "Controlling Other Onkyo Components" about the operation of other components
  • Onkyo HT-R591 | Owners Manual - Page 22
    only on a TV that is connected to the HDMI OUT. This section explains how to play music files recommend you use an official USB cable from Apple Inc. Turning On & Basic Operations 4 Use R/X to select a music iPod or iPhone to the USB port, no sound will be output from the headphones jack. Extended
  • Onkyo HT-R591 | Owners Manual - Page 23
    Playing a USB Device The on-screen menus appear only on a TV that is connected to the HDMI OUT. This section explains how to play music files from a USB device (e.g., USB flash drives and MP3 players). with your iPod/iPhone or the USB device from the USB port. En-23 Turning On & Basic Operations
  • Onkyo HT-R591 | Owners Manual - Page 24
    FM station is weak, it may be impossible to get good reception. In this case, switch to manual tuning mode and listen to the station in mono. Turning On & Basic Operations ■ Manual tuning mode In manual tuning mode, FM stations will be in mono. 1 Press TUNING MODE so that the AUTO indicator goes
  • Onkyo HT-R591 | Owners Manual - Page 25
    the AV receiver's display. Turning On & Basic Operations Using RDS (excluding North American and Brazilian models) RDS works only in areas where RDS news, sport, rock, etc.). The AV receiver supports four types of RDS information: PS (Program Service) When tuned to an RDS station that's
  • Onkyo HT-R591 | Owners Manual - Page 26
    The AV receiver searches until it finds a station that's broadcasting TP. If no stations are found, the message "Not Found" appears. Turning On & Basic Operations RDS program types (PTY) Type None News reports Current affairs Information Sport Education Drama Culture Science and technology Varied
  • Onkyo HT-R591 | Owners Manual - Page 27
    problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound and the optimum crossover value for the subwoofer. C Second measurement position The right , home appliances, light dimmers, or other devices. Turn off the cell phone (even if it is not
  • Onkyo HT-R591 | Owners Manual - Page 28
    only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs press ENTER. 2EQ: Auto Setup Audyssey Subwoofer Front Center Surround Front High Surr Back Surr 2EQ Room Correction and Speaker Setup. Turning On & Basic Operations Tip •
  • Onkyo HT-R591 | Owners Manual - Page 29
    2 or 3 attempts, contact your Onkyo dealer. • Speaker Detect Error This sound distorts, detection issues may occur, so use an appropriate volume level. If the subwoofer has a low-pass filter switch, set it to Off or Direct. Refer to your subwoofer's instruction manual for details. En-29 Turning
  • Onkyo HT-R591 | Owners Manual - Page 30
    first. MOVIE/TV, MUSIC, GAME MUSIC MOVIE/TV GAME STEREO Turning On & Basic Operations MOVIE/TV button This button selects the listening connected to the AV receiver with a digital audio connection (coaxial, optical, or HDMI). • The listening modes you can select depends on the format of the input
  • Onkyo HT-R591 | Owners Manual - Page 31
    Subwoofer Input Source The following audio formats are supported by the listening mode. " 4 % ' ( ) This is mono (monophonic) sound. This is stereo (stereophonic) sound Digital EX surround sound. This provides a center back surround channel from 5.1channel sources. Turning On & Basic Operations
  • Onkyo HT-R591 | Owners Manual - Page 32
    room. Speaker Layout $/ 9$/ Turning On & Basic Operations Listening Mode T-D (TheaterDimensional)*1 T-D Description Input Source With this mode you can enjoy a virtual " surround sound even with only two or three 4 speakers. This works by controlling how % sounds reach the listener's left
  • Onkyo HT-R591 | Owners Manual - Page 33
    9$/ 9$/ 9$ /*2 9$/ 9$ /*2 9$/ 9$/ 9$ /*2 9$/ 9$ /*2 9$/ 9$/ Turning On & Basic Operations Listening Mode Description Input Source DTS-ES Discrete*6 ES D i s 7.1-channel playback. It provides a very natural and seamless surround-sound experience that fully envelops the listener. As well as music
  • Onkyo HT-R591 | Owners Manual - Page 34
    dimension and provides an enveloping surround sound experience, perfect for rotating and fly-by sound Layout # 7 9$/ 7 Turning On & Basic Operations Note sound. *3 The AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better sound
  • Onkyo HT-R591 | Owners Manual - Page 35
    the following settings: "Bass", "Treble", "Subwoofer Level", "Center Level", "Audyssey", "Dynamic not all channels shown here output the sound. *2 • This setting is not available in either of ). -"HDMI Ctrl (RIHD)" is set to "On" (➔ page 49) and you're listening through your TV speakers. Turning On
  • Onkyo HT-R591 | Owners Manual - Page 36
    information can typically be displayed. Input source & volume*1 Listening mode → Turning On & Basic Operations Changing the Input Display When you connect an V-capable Onkyo component, you must configure the input display so that V can work properly. This setting can be done only from the front
  • Onkyo HT-R591 | Owners Manual - Page 37
    Music Optimizer The Music Optimizer function enhances the sound quality of compressed music files. 1 Press the volume. • Muting is automatically cancelled when the AV receiver is set to standby. Turning On & Basic Operations Using Headphones 1 Connect a pair of stereo headphones with a standard
  • Onkyo HT-R591 | Owners Manual - Page 38
    . 2 On your recorder, start recording. 3 On the source component, start playback. If you select another input source during recording, that input source will be recorded. Turning On & Basic Operations En-38
  • Onkyo HT-R591 | Owners Manual - Page 39
    appear on the AV receiver's display. Explanatory Notes Advanced Operations B Menu C ■ Subwoofer D ` Yes ` No Sp Config B Menu selection C Setting target D Setting options (default setting underlined) Menu 1. HDMI Input 2. Component 3. Digital Audio 4. Sp Config 5. Sp Distance 6. Level Cal
  • Onkyo HT-R591 | Owners Manual - Page 40
    Back Right Surr Back Left Surround Left Subwoofer Input Ch (Mux) Input Ch (Mono) Panorama Dimension Center Width Height Gain Dolby EX Center 48) HDMI Setup (➔ page 49) Advanced Operations Setting target Volume OSD Remote ID AM/FM Freq Step AM Freq Step Auto Standby HDMI Ctrl (RIHD) HDMI Through
  • Onkyo HT-R591 | Owners Manual - Page 41
    , AUX, TV/CD ` HDMI1, HDMI2, HDMI3, HDMI4: Select the input to which the component has been connected Select if you're not using the HDMI OUT. Each HDMI input cannot be assigned to two input selectors or more. When HDMI1 - HDMI4 have already been assigned, you must first set any unused input
  • Onkyo HT-R591 | Owners Manual - Page 42
    by Audyssey 2EQ Room Correction and Speaker Setup, or set them manually, which is useful if you change one of the connected speakers "On" (➔ page 50). - "HDMI Ctrl (RIHD)" is set to "On" (➔ page 49) and you're listening through your TV speakers. Advanced Operations ■ Subwoofer ` Yes ` No ■ Front `
  • Onkyo HT-R591 | Owners Manual - Page 43
    manuals supplied with your speakers and set accordingly. • Choose a higher crossover frequency if you want more sound from your subwoofer Off Turn this setting on to boost bass output by feeding bass sounds from the front left, right, and center channels to the subwoofer. Note • When the "Subwoofer"
  • Onkyo HT-R591 | Owners Manual - Page 44
    Audio TV Out" setting is set to "On" (➔ page 50). - "HDMI Ctrl (RIHD)" is set to "On" (➔ page 49) and you're ` -12 dB to 0 dB to +12 dB in 1 dB step. ■ Subwoofer*1 ` -15 dB to 0 dB to +12 dB in 1 dB step. listening mode. Dimension `-3 to 0 to +3 With this setting, you can move the sound field forward
  • Onkyo HT-R591 | Owners Manual - Page 45
    . • If the "Front High" setting is enabled (➔ page 42), this setting is fixed to "Manual". DTS ■ Neo:6 Music Center Image ` 0 to 2 to 5 The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel stereo sources. With this setting, you can specify by how much the front left
  • Onkyo HT-R591 | Owners Manual - Page 46
    cannot be selected. • Audyssey equalizing does not work for DSD sources. ■ Dynamic EQ ` Off sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound response and surround envelopment when the volume is turned down from 0 dB. However, film
  • Onkyo HT-R591 | Owners Manual - Page 47
    works in tandem with Audyssey 2EQ® to provide well-balanced sound for every listener at any volume level. About Audyssey Dynamic Volume® Audyssey Dynamic Volume solves the problem on whether your TV supports HDMI Lip Sync and if the PC, TV, CD, TAPE, iPod: To reset to the default, select "- - -". You
  • Onkyo HT-R591 | Owners Manual - Page 48
    there will be no sound. When "HDMI", "COAXIAL" or material, you can manually set the signal Note • The setting will be reset to "Off" when you change the Turn this setting on to display the volume level on the TV screen while it is adjusted. Remote ID ■ Remote ID `1, 2, or 3 When several Onkyo
  • Onkyo HT-R591 | Owners Manual - Page 49
    area. For AM/FM tuning to work properly, you must specify the AM/ HDMI Setup 1 2 3 4 5 6 Menu HDMI Setup ■ HDMI Ctrl (RIHD) ` Off ` On Turn this setting on to allow Q-compatible components connected via HDMI connected component's instruction manual for details. • When the "HDMI Ctrl (RIHD)"
  • Onkyo HT-R591 | Owners Manual - Page 50
    works only if your HDMI-compatible TV supports HDMI Lip Sync. After changing the settings of the "HDMI Ctrl (RIHD)", "HDMI Through" or "Audio Return Ch" turn off the power on all connected pieces of equipment and then turn them on again. Refer to the user's manuals frequency sounds output from
  • Onkyo HT-R591 | Owners Manual - Page 51
    Speaker Levels ■ Subwoofer Level ` -15 is set to "On" or "Off" automatically. ` Off ` On Turn this setting on to reduce the dynamic range of Dolby Digital material so the material that you are playing and the intention of the original sound designer, and with some material there will be little or no
  • Onkyo HT-R591 | Owners Manual - Page 52
    On The Music Optimizer function enhances the sound quality of compressed music files. The M.Opt indicator lights on the AV receiver's display. Tip • Alternatively, you can use the AV receiver's MUSIC OPTIMIZER. Note • The Music Optimizer function only works with PCM digital audio input signals with
  • Onkyo HT-R591 | Owners Manual - Page 53
    information on the Onkyo Dock components, see the Onkyo web site at: http://www.onkyo.com Before using the Onkyo Dock components, update your iPod/iPhone with the latest software, available from the Apple web site. For supported iPod/iPhone models, see the instruction manual of the Onkyo Dock. RI
  • Onkyo HT-R591 | Owners Manual - Page 54
    Note • With some iPod/iPhone models, generations and RI Docks, certain buttons may not work as expected. • For detailed operation of iPod/iPhone, please refer to the instruction manual of the RI Dock. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Also, your iPod/iPhone
  • Onkyo HT-R591 | Owners Manual - Page 55
    1 Look up the appropriate remote control code in the Remote Control Codes for Onkyo Components Connected via V. 2 While holding down the REMOTE MODE button to which be assigned to the REMOTE MODE button. However, these buttons also work as input selector buttons (➔ page 20), so choose a REMOTE MODE
  • Onkyo HT-R591 | Owners Manual - Page 56
    control codes: ` 30627: Onkyo DVD player without V ` 71817: Onkyo CD player without V ` 32900/33000: Onkyo Blu-ray Disc player ` 32901/33004: Onkyo HD DVD player ` 70868: Onkyo MD recorder without V ` 71323: Onkyo CD recorder without V ` 82990: Onkyo Dock without V Resetting the REMOTE MODE Buttons
  • Onkyo HT-R591 | Owners Manual - Page 57
    the remote control code for your component, you can control Onkyo component as described below. For details on entering a Blu-ray Disc/DVD player with Q *1 The Q supported by the AV receiver is the CEC system control function of the HDMI standard. Press the appropriate REMOTE MODE button first. B
  • Onkyo HT-R591 | Owners Manual - Page 58
    MUTING Note • With some components, certain buttons may not work as expected, and some may not work at all. • See "Controlling Your iPod/iPhone" about the operation of iPod/iPhone (➔ page 54). *1 The Q function is not supported. The Q supported by the AV receiver is the CEC system control function
  • Onkyo HT-R591 | Owners Manual - Page 59
    trouble using the AV receiver, look for a solution in this section. If you can't resolve the issue yourself, contact your Onkyo dealer. If you can't resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer. To reset the AV receiver to its factory defaults, turn
  • Onkyo HT-R591 | Owners Manual - Page 60
    subwoofer produce sound. Check the Speaker Configuration. 42 ■ Only the center speaker produces sound If Appendix ■ The Late Night function doesn't work Make sure the source material is Dolby Digital an HDMI IN can't be heard Since it takes longer to identify the format of an - HDMI signal
  • Onkyo HT-R591 | Owners Manual - Page 61
    a TV via - HDMI OUT, on-screen menus may not work reliably when components If it's an Onkyo component, make sure that ■ There's no sound Make sure your turned on, the correct - input source is selected, and the volume is turned up. Make sure the plugs are pushed in all the way. - Try resetting
  • Onkyo HT-R591 | Owners Manual - Page 62
    resetting your iPod/iPhone. - Depending on your iPod/iPhone, some buttons may - not work in properly. - The AV receiver supports USB devices that support 68 the USB mass storage device class as usual.) - The "HDMI Through" setting is set to other than "Off". ■ The sound changes when I connect my
  • Onkyo HT-R591 | Owners Manual - Page 63
    picture on your TV/monitor connected to the HDMI OUT is unstable, try switching the DeepColor function off To turn off the DeepColor function, simultaneously press the CBL at least five seconds, and then plug it back in. Onkyo is not responsible for damages (such as CD rental fees) due to
  • Onkyo HT-R591 | Owners Manual - Page 64
    with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver
  • Onkyo HT-R591 | Owners Manual - Page 65
    the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, operation with components
  • Onkyo HT-R591 | Owners Manual - Page 66
    automatically turns on, and selects the input to which the AV receiver is connected. 5. Following the operating instructions of On the TV, when you select anything other than the HDMI jack to which the AV receiver is connected, the input on work depending on the component model connected. In such cases
  • Onkyo HT-R591 | Owners Manual - Page 67
    PC are not supported. • The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there's no sound from a component connected via HDMI, check its setup. Refer to the connected component's instruction manual for details. En
  • Onkyo HT-R591 | Owners Manual - Page 68
    drivers or software. Note that not all USB MP3 players support the USB Mass Storage Class standard. Refer to your USB MP3 player's instruction manual for details. • Protected WMA music files on an MP3 player cannot be played. • Onkyo accepts no responsibility whatsoever for the loss or damage to
  • Onkyo HT-R591 | Owners Manual - Page 69
    the double-D symbol are trademarks of Dolby Laboratories. Music Optimizer™ is a trademark of Onkyo Corporation. "HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries." iPhone, iPod, iPod
  • Onkyo HT-R591 | Owners Manual - Page 70
    A (Asian) 530 W No-sound Power Consumption (North American and Brazilian) 0.2 W (Asian) 0.3 W Dimensions (W × H × D) 435 mm lbs.) ■ HDMI Appendix Input Output Video Resolution Audio Format Supported ■ Video Inputs ■ Audio Outputs Analog VCR/DVR Subwoofer Pre Output 1 Speaker Outputs Main
  • Onkyo HT-R591 | Owners Manual - Page 71
    Memo Appendix En-71
  • Onkyo HT-R591 | Owners Manual - Page 72
    .com/ 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.cn.onkyo.com/ SN 29401056 (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. Y1112-1 * 2 9 4 0 1 0 5 6 *
  • Onkyo HT-R591 | Owners Manual - Page 73
    instead of 1 sheet, but the total number will be same. Surround back speakers (Brown) (Tan) Speaker cables 26 ft. (8.0 m) Powered subwoofer (SKW-591) Subwoofer 4 floor pads RCA cable 10 ft. (3.0 m) SKF-591 Speaker terminals SKC-591N/ SKC-591 Keyhole slots Keyhole slot Speaker terminals SKR-590
  • Onkyo HT-R591 | Owners Manual - Page 74
    RCA cable. (Asian) (Brazilian) Note • The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on your receiver. Before Using the Home
  • Onkyo HT-R591 | Owners Manual - Page 75
    Caution • A mounting screw's ability to support a Wall speaker depends on how well it's anchored to the about 2 to 3 feet (60 to 100 cm) above ear level. F Subwoofer (SKW-591) The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects) channel and bass from the satellite speakers
  • Onkyo HT-R591 | Owners Manual - Page 76
    ■ Powered Subwoofer (SKW-591 distortion of 1% Frequency response 25 Hz to 150 Hz Cabinet capacity 1.34 cubic feet (38 L) Dimensions (W × H × D) 12-1/2" × 18-7/16" × 15-11/16" (317.5 mm × discoloration should occur, turn off your TV or monitor, wait 15 to 30 minutes, and then turn it back on again
  • Onkyo HT-R591 | Owners Manual - Page 77
    bouchons de caoutchouc peut être différente de la figure, en comportant par exemple 2 feuilles au lieu d'une, mais leur nombre total est identique. Subwoofer 4 tampons de protection Câble RCA 3,0 m SKF-591 Bornes d'enceinte SKC-591N/ SKC-591 Encoches en trou de serrure Encoche en trou de serrure
  • Onkyo HT-R591 | Owners Manual - Page 78
    les bouchons en caoutchouc pour l'enceinte centrale. Bouchons de caoutchouc Dessous de la SKC-591N/SKC-591 Utilisation des tampons de protection pour le subwoofer Si le subwoofer est placé sur un sol dur (bois, vinyle, carrelage, etc.) et si le niveau sonore de la lecture est élevé, les pieds du
  • Onkyo HT-R591 | Owners Manual - Page 79
    capacité de la vis de fixation Mur permettant de supporter une enceinte dépend de la façon dont elle de votre position d'écoute. En général, il est possible d'obtenir un bon son grave en installant le subwoofer dans un coin situé devant l'auditeur ou à environ un tiers de la largeur du mur (cf.
  • Onkyo HT-R591 | Owners Manual - Page 80
    techniques ■ Subwoofer amplifié (SKW Distorsion de fréquence 25 Hz à 150 Hz Capacité du coffrage 1,34 pieds cubiques (38 L) Dimensions (L × H × P) 12-1/2" × 18-7/16" × 15-11/16" (317,5 mm × décoloration. SN 29400973 (C) Copyright 2012 ONKYO SOUND & VISION CORPORATION Japan. All rights reserved. Y1112-1 * 2 9
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
E
n
AV RECEIVER
HT-R591
Instruction Manual
Contents
Safety Information and Introduction
............
2
Table of Contents
...........................................
5
Connections
.................................................
11
Turning On & Basic Operations
..................
19
Advanced Operations
..................................
39
Controlling Other Components
...................
53
Appendix
.......................................................
59
Speaker Package