Onkyo HT-R648 User Manual English

Onkyo HT-R648 Manual

Get Onkyo HT-R648 PDF manuals and user guides View all Onkyo HT-R648 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo HT-R648 manual content summary:

  • Onkyo HT-R648 | User Manual English - Page 1
    AV Receiver HT-R648 Instruction Manual Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new
  • Onkyo HT-R648 | User Manual English - Page 2
    to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 15. Damage Requiring Service 2. Keep these instructions. Unplug the apparatus from the wall outlet and refer
  • Onkyo HT-R648 | User Manual English - Page 3
    the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer. 3. Care-Occasionally you should dust the unit all over with a soft or any other liquid gets inside this unit, have it checked by your Onkyo dealer. 8. Handling Notes • If you need to transport this unit, use
  • Onkyo HT-R648 | User Manual English - Page 4
    Supplied Accessories Make sure you have the following accessories: Indoor FM antenna (➔ page 18) AM loop antenna (➔ page 18) Speaker cable labels (➔ page 12) Speaker setup microphone (➔ page 28) Remote controller (RC-801M) and two batteries (AA/R6) * In catalogs and on packaging, the letter at the
  • Onkyo HT-R648 | User Manual English - Page 5
    Contents Introduction Important Safety Instructions 2 Precautions 3 Supplied Accessories 4 Features 6 Front & Rear Panels 7 Onkyo Components Connected via V 56 Resetting REMOTE MODE Buttons 57 Resetting the Remote Controller 57 Controlling Other Components 57 Appendix Troubleshooting
  • Onkyo HT-R648 | User Manual English - Page 6
    • Audyssey 2EQ®*7 to correct room acoustic problems • Audyssey Dynamic EQ®*7 for loudness correction . *4 Music Optimizer™ is a trademark of Onkyo Corporation. *5 "HDMI, the HDMI Logo, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living
  • Onkyo HT-R648 | User Manual English - Page 7
    Front & Rear Panels Front Panel B C D EF GH IJ KL M N OP Q R S T UV The page numbers in parentheses show where you can find the main explanation for each item. B ON/STANDBY button (19) M RETURN button C ZONE 2, OFF buttons (52) N MASTER VOLUME control (20) D Remote control sensor (4)
  • Onkyo HT-R648 | User Manual English - Page 8
    Display BC DE F GH IJ For detailed information, see the pages in parentheses. B Speaker/channel indicators C Z2 (Zone 2) indicator (52) D Listening mode and format indicators (31, 51) E ,  and cursor indicators (21) F NET indicator (22, 49) G Tuning indicators RDS indicator (26) AUTO indicator
  • Onkyo HT-R648 | User Manual English - Page 9
    Rear Panel B C DE F G H I J K LM N B DIGITAL IN COAXIAL and OPTICAL jacks C COMPONENT VIDEO IN and OUT jacks D ETHERNET port E FM ANTENNA jack and AM ANTENNA terminal F HDMI IN and OUT jacks G UNIVERSAL PORT jack H SPEAKERS terminals (CENTER, FRONT, SURROUND) I Power cord J V
  • Onkyo HT-R648 | User Manual English - Page 10
    Controller Controlling the AV Receiver B C *1 D B E F G C To control the AV receiver, you need to select Receiver mode by pressing RECEIVER. You can also Onkyo Blu-ray Disc/DVD player, CD player and other components to control with the remote controller. See "Entering Remote Control Codes" for more
  • Onkyo HT-R648 | User Manual English - Page 11
    Connections Connecting the AV Receiver Connecting Your Speakers Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one surround back speaker, connect it to the SURROUND BACK L PRE OUT jack. Surround
  • Onkyo HT-R648 | User Manual English - Page 12
    you need to set the speaker settings automatically (➔ page 28) or manually (➔ page 41). Number of channels Front speakers Center speaker Surround speakers from the wall outlet before making any connections. • Read the instructions supplied with your speakers. • Pay close attention to speaker wiring
  • Onkyo HT-R648 | User Manual English - Page 13
    Using a Powered Subwoofer To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results. Tip • If your subwoofer is unpowered
  • Onkyo HT-R648 | User Manual English - Page 14
    / DVD player Game console • Before making any AV connections, read the manuals supplied with your AV components. • Don't connect the power cord until 176.4/192 kHz is also available. Note • The AV receiver does not support SCART plugs. • The AV receiver's optical digital jacks have shutter-type
  • Onkyo HT-R648 | User Manual English - Page 15
    Connecting Components with HDMI VCR or DVD recorder/Digital Video Recorder Game console TV, projector, etc. Satellite/cable set-top box, etc. Blu-ray Disc/DVD player Connect your components to the appropriate jacks. The default input assignments are shown below. ✔: Assignment can be changed (➔
  • Onkyo HT-R648 | User Manual English - Page 16
    moving coil (MC) type cartridge, you'll need a commercially available MC head amp or MC transformer as well as a phono preamp. See your turntable's manual for details. • With connection (, you can listen and record audio from the external components while you are in Zone 2. You can listen and record
  • Onkyo HT-R648 | User Manual English - Page 17
    to V jacks. Connecting other manufacturer's components may cause a malfunction. • Some components may not support all V functions. Refer to the manuals supplied with your Onkyo components. • While Zone 2 is on, the System On/Auto Power On and Direct Change V functions do not work. Connecting
  • Onkyo HT-R648 | User Manual English - Page 18
    components. • Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit. En 18
  • Onkyo HT-R648 | User Manual English - Page 19
    Turning On & Basic Operations Turning On/Off the AV Receiver ON/STANDBY RECEIVER RECEIVER Turning On 1 Press ON/STANDBY on the front panel. or Press RECEIVER followed by RECEIVER on the remote controller. The AV receiver comes on, the display lights. Turning Off 1 Press ON/STANDBY on the
  • Onkyo HT-R648 | User Manual English - Page 20
    • "Listening to AM/FM Radio" (➔ page 25) • "iPod/iPhone Playback via Onkyo Dock" (➔ page 53) • "Controlling Other Components" (➔ page 56) 3 To adjust R B TOP MENU This button displays the top menu for each media or service. C R/X and ENTER These buttons navigate through the menus. F/S This button
  • Onkyo HT-R648 | User Manual English - Page 21
    K MENU This button returns to top menu of the Internet Radio Services. L RETURN This button returns to the previous menu. M This button fast-forwards the current song. N This button selects the next song. O This button stops playback. P
  • Onkyo HT-R648 | User Manual English - Page 22
    support the USB Mass Storage Class standard. Refer to your USB MP3 player's instruction manual for details. • Protected WMA music files on an MP3 player cannot be played. • Onkyo . Note • Services available may vary depending on the region. See the separate instructions for more information
  • Onkyo HT-R648 | User Manual English - Page 23
    are displayed. `Add to My Favorites: Adds a station to My Favorites list. Press TOP MENU to go to the top menu of the Internet Radio services. Tip • By pressing SEARCH, you can toggle between the playback screen and the radio list screen. Listening to Other Internet Radio To listen to other
  • Onkyo HT-R648 | User Manual English - Page 24
    media servers which do not support this function. • Photos and movies stored on a media server cannot be accessed from the AV receiver. • Depending on the sharing settings in the media server, the AV receiver may not able to access the content. See the instruction manual of the media server. 5 Use
  • Onkyo HT-R648 | User Manual English - Page 25
    FM stereo stations If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to manual tuning mode and listen to the station in mono. En 25
  • Onkyo HT-R648 | User Manual English - Page 26
    tuning mode In manual tuning mode, FM stations will be in mono. 1 Press TUNING MODE so radio stations by type (e.g., news, sport, rock, etc.). The AV receiver supports four types of RDS information: PS (Program Service) When tuned to an RDS station that's broadcasting PS information, the station's
  • Onkyo HT-R648 | User Manual English - Page 27
    ■ Displaying Radio Text (RT) 1 Press RT/PTY/TP once. The RT information scrolls across the display. Note • The message "Waiting" may appear while the AV receiver waits for the RT information. • If the message "No Text Data" appears on the display, no RT information is available. ■ Finding Stations
  • Onkyo HT-R648 | User Manual English - Page 28
    (if present), and distances from the primary listening position. Audyssey 2EQ then removes the distortion caused by room acoustics by capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Audyssey 2EQ
  • Onkyo HT-R648 | User Manual English - Page 29
    4 Press ENTER. Audyssey 2EQ® Room Correction and Speaker Setup starts. Test tones are played through each speaker as Audyssey 2EQ Room Correction and Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the
  • Onkyo HT-R648 | User Manual English - Page 30
    appears if saving fails. Try saving again. If this message appears after 2 or 3 attempts, contact your Onkyo dealer. • Speaker Detect Error This message appears if a speaker is not detected. "No" means that , set it to Off or Direct. Refer to your subwoofer's instruction manual for details. En 30
  • Onkyo HT-R648 | User Manual English - Page 31
    Using the Listening Modes Selecting Listening Modes See "About Listening Modes" for detailed information about the listening modes (➔ page 32). ■ Listening Mode Buttons Press RECEIVER first. PURE AUDIO MOVIE/TV, MUSIC, GAME MUSIC MOVIE/TV GAME STEREO MOVIE/TV button This button selects the
  • Onkyo HT-R648 | User Manual English - Page 32
    BC D B Front speakers C Center speaker D Surround speakers E Surround back speakers F Subwoofer F E Input Source The following audio formats are supported by the listening modes. " 4 % ' ( ) This is mono (monophonic) sound. This is stereo (stereophonic) sound. Two independent audio signal
  • Onkyo HT-R648 | User Manual English - Page 33
    ■ Onkyo-Original DSP Listening Modes Listening Mode Orchestra Or ches t r a Unplugged Unp l ugged Studio-Mix S t u d i o -M i x TV Logic TV L og i c Game-RPG Game -RPG Game-Action Game - A c t i o n
  • Onkyo HT-R648 | User Manual English - Page 34
    Listening Mode Dolby Pro Logic IIx Dolby Pro Logic II PL Mo v i e PL Mu s i c PL Game PL x Mo v i e PL x Mu s i c PL x Game Dolby EX Do l b y EX Do l b y D EX Dolby Digital Do l b y D Dolby Digital Plus*2 Do l b y D + Dolby TrueHD Do l b y T r u eHD DTS DTS DTS-HD High Resolution Audio DTS -HD HR
  • Onkyo HT-R648 | User Manual English - Page 35
    Listening Mode Neo:6 Neo : 6 Ne o : 6 C i n ema Ne o : 6 Mu s i c Description Input Source This mode expands any 2-channel source for up to 7.1-channel playback. It 4 uses seven full-bandwidth channels of matrix decoding for matrix-encoded material, providing a very natural and seamless surround
  • Onkyo HT-R648 | User Manual English - Page 36
    Using the Home Menu Using the Sleep Timer The Home menu provides you quick access to frequently used menus without having to go through the long standard menu. This menu enables you to change settings and view the current information. The Home menus appear only on a TV that is connected to the
  • Onkyo HT-R648 | User Manual English - Page 37
    Changing the Input Display When you connect an V-capable Onkyo component, you must configure the input display so that V can work properly. This setting can be done only from the front panel. 1 Press TV/CD,
  • Onkyo HT-R648 | User Manual English - Page 38
    Recording Separate AV Sources Here you can record audio and video from completely separate sources, allowing you to overdub audio onto your video recordings. This function takes advantage of the fact that when an audio-only input source (TV/CD) is selected, the video input source remains unchanged.
  • Onkyo HT-R648 | User Manual English - Page 39
    Advanced Operations Advanced Setup On-screen Setup Menus The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings. Note The on-screen setup menus are
  • Onkyo HT-R648 | User Manual English - Page 40
    Explanatory Notes B Menu Sp Config C Subwoofer D Yes: Select if a subwoofer is connected. No: Select if no subwoofer is connected. B Menu selection C Setting target D Setting options (default setting underlined) HDMI Input Menu HDMI Input If you connect a video component to an HDMI
  • Onkyo HT-R648 | User Manual English - Page 41
    Correction and Speaker Setup (➔ page 28). Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup, or set them manually, which is useful if you change one of the connected speakers after using Audyssey 2EQ Room Correction and Speaker Setup. This section explains how
  • Onkyo HT-R648 | User Manual English - Page 42
    Note • This function can be set only if the "Subwoofer" setting is set to "Yes", and the "Front" setting is set to "Large" (➔ page 41). When an optional unit is connected to the UNIVERSAL PORT jack on the AV receiver, the speaker setting menu may appear on screen. ■ Wireless SB (Surround Back) `
  • Onkyo HT-R648 | User Manual English - Page 43
    of the center channel sound. ■ Dolby EX ` Auto: If the source signal contains a Dolby EX flag, the Dolby EX listening mode is used. ` Manual: You can select any available listening mode. This setting determines how Dolby EX encoded signals are handled. This setting is unavailable if no surround back
  • Onkyo HT-R648 | User Manual English - Page 44
    light (➔ page 8). With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by selecting the correct
  • Onkyo HT-R648 | User Manual English - Page 45
    selected. About Audyssey Dynamic EQ® Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into . The range of values you can adjust will depend on whether your TV or display supports HDMI Lip Sync and if the "LipSync" setting is set to "On" or not
  • Onkyo HT-R648 | User Manual English - Page 46
    either of the following issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS. • If the beginnings of it is adjusted. Remote Control ■ Remote ID `1, 2, or 3 When several Onkyo components are used in the same room, their remote ID codes may overlap. To
  • Onkyo HT-R648 | User Manual English - Page 47
    selected when: - the UP-A1 Dock with docked iPod/iPhone is not connected to the AV receiver, or - the docked iPod/iPhone model is not supported. • When the "UP-A1 ChargeMode" setting is set to "On", or to "Auto" with your iPod/iPhone recharging, the SLEEP indicator is dimly lit in
  • Onkyo HT-R648 | User Manual English - Page 48
    is compatible or not. • If operation is not normal when set to "On", change the setting to "Off". • Refer to the connected component's instruction manual for details. • When "HDMI Ctrl (RIHD)" setting is set to "On", the power consumption on standby mode slightly increases. (Depending on the TV
  • Onkyo HT-R648 | User Manual English - Page 49
    • This function works only if your HDMI-compatible TV supports HDMI Lip Sync. After changing the settings of the them on again. Refer to the instructions for all connected pieces of equipment. how to configure the AV receiver's network settings manually. If your router's DHCP server is enabled
  • Onkyo HT-R648 | User Manual English - Page 50
    the firmware update via Internet. Check the network connection before updating. `via USB: Performs the firmware update from a USB device. You can update the Onkyo dock's firmware. Do not shutdown the power of the AV receiver while update. Note • This update shall not be performed when no dock is
  • Onkyo HT-R648 | User Manual English - Page 51
    Audyssey Music Optimizer ■ Audyssey See "Audyssey" of "Source Setup" (➔ page 44). ■ Dynamic EQ See "Dynamic EQ" of "Source Setup" (➔ page 44). ■ Dynamic Volume See "Dynamic Volume" of "Source Setup" (➔ page 45). Note • These technologies can be used when all the following conditions are met: -
  • Onkyo HT-R648 | User Manual English - Page 52
    Zone 2 In addition to the main listening room, you can also enjoy playback in another room, which we call Zone 2. For either of the rooms, you can specify a different input source. Making Zone 2 Connections Connecting the Zone Speakers to an Additional Amplifier This setup allows 5.1-channel
  • Onkyo HT-R648 | User Manual English - Page 53
    components, update your iPod/iPhone with the latest software, available from the Apple web site. For supported iPod/iPhone models, see the instruction manual of the Onkyo Dock. UP-A1 Dock With the UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod/iPhone through
  • Onkyo HT-R648 | User Manual English - Page 54
    AV receiver is checking the connection with the dock. • PORT Not Support The AV receiver do not support the connected dock. • PORT UP-A1 UP-A1 Dock is connected a remote control code (➔ page 56). See the Dock's instruction manual for more information. UP-A1 Dock PORT is preprogrammed with the
  • Onkyo HT-R648 | User Manual English - Page 55
    work as expected. • For detailed operation of iPod/iPhone, please refer to the instruction manual of the RI Dock. *1 TOP MENU works as the mode button when used with (see *7), this button doesn't work. *4 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Also, your iPod/iPhone
  • Onkyo HT-R648 | User Manual English - Page 56
    . If the remote control code is not entered successfully, the remote indicator will flash once slowly. Remote Control Codes for Onkyo Components Connected via V Onkyo components that are connected via V are controlled by pointing the remote controller at the AV receiver, not the component. This
  • Onkyo HT-R648 | User Manual English - Page 57
    a Blu-ray Disc/DVD Player, HD DVD Player or DVD Recorder BD/DVD is preprogrammed with the remote control code for controlling a component that supports the Q*1. The component must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. Use the following
  • Onkyo HT-R648 | User Manual English - Page 58
    at all. Buttons B RECEIVER ✔ ✔ C , INPUT, ✔ TV VOL R/X, MUTING D GUIDE TOP MENU ✔ ✔ ✔✔ E R/X/F/S ENTER ✔✔ ✔✔ ✔ F SETUP ✔✔ ✔✔ ✔ G ✔*1 ✔ Q CLR ✔✔ ✔✔ ✔ *1 The Q function is not supported. The Q supported by the AV receiver is the CEC system control function of the HDMI
  • Onkyo HT-R648 | User Manual English - Page 59
    Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can't resolve the issue yourself, contact your Onkyo dealer. If you can't resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo supported audio format. Check the
  • Onkyo HT-R648 | User Manual English - Page 60
    's no sound with a certain signal format Check the digital audio output setting on the - connected device. On some game consoles, such as those that support DVD, the default setting is off. With some DVD-Video discs, you need to select an - audio output format from a menu. Depending on the
  • Onkyo HT-R648 | User Manual English - Page 61
    an HDMI-to-DVI adapter is 71 not guaranteed. In addition, video signals from a PC are not guaranteed. ■ Can't control other components If it's an Onkyo component, make sure that the V 17 cable and analog audio cable are connected properly. Connecting only an V cable won't work. Make sure you've
  • Onkyo HT-R648 | User Manual English - Page 62
    49 USB Device Playback ■ Can't access the music files on a USB device Make sure the USB device is plugged in properly. - The AV receiver supports USB devices that support - the USB mass storage device class. However, playback may not be possible with some USB devices even if they conform to the USB
  • Onkyo HT-R648 | User Manual English - Page 63
    the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in. Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the unit's malfunction. Before you record important data
  • Onkyo HT-R648 | User Manual English - Page 64
    . Consult your ISP if you have any problems with your Internet connection. • The AV receiver uses DHCP to configure its network settings automatically. If you want to configure these settings manually, see "Network Setup" (➔ page 49). • The AV receiver does not support PPPoE settings, so if you have
  • Onkyo HT-R648 | User Manual English - Page 65
    varies depending on the device. Refer to your device's instruction manual for details. If the operating system of your personal computer kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, and 96 kHz are supported. • Quantization bit: 8 bit, 16 bit, 24 bit * Only for playback via network. About DLNA
  • Onkyo HT-R648 | User Manual English - Page 66
    important music files beforehand. • If you connect a USB hard disk drive to the USB port, Onkyo recommends that you use its AC adapter to power it. • USB hubs and USB devices with hub functions are not supported. Do not connect your USB device via a USB hub. • USB devices with security functions are
  • Onkyo HT-R648 | User Manual English - Page 67
    Onkyo AV receiver. Troubleshooting the instruction manual of the router. • If your network allows only one client connection and there is any other device already connected, the AV receiver will not be able to access the network. Consult your Internet Service contact Onkyo Support (➔
  • Onkyo HT-R648 | User Manual English - Page 68
    procedure 1 Connect a USB device to your PC. If there is any data in the USB device, remove it first. 2 Download the firmware file from the Onkyo web site. The file name is as follows: ONKAVR zip Unzip the downloaded file. The following three files are created: ONKAVR of1 ONKAVR of2 ONKAVR
  • Onkyo HT-R648 | User Manual English - Page 69
    Troubleshooting Case 1: If "No Update" is displayed on the front display of another model. Retry and download the file on the support page of the web site, following the on-site instructions. If the error persists, please contact Onkyo Support and provide the error code. Retry the update procedure
  • Onkyo HT-R648 | User Manual English - Page 70
    several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is
  • Onkyo HT-R648 | User Manual English - Page 71
    PC are not supported. • The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there's no sound from a component connected via HDMI, check its setup. Refer to the connected component's instruction manual for details. En
  • Onkyo HT-R648 | User Manual English - Page 72
    Using an RIHD-compatible TV, Player, or Recorder Q, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI
  • Onkyo HT-R648 | User Manual English - Page 73
    Disc/DVD player/recorder is connected. • The TV automatically turns on, and selects the input to which the AV receiver is connected. 5. Following the operating instructions of the TV, select "Use the TV speakers" from the menu screen of the TV, and confirm that the audio is output from the speakers
  • Onkyo HT-R648 | User Manual English - Page 74
    45 W Stand-by Power Consumption Dimensions (W × H × D) 0.3 W 435 mm × 173.5 mm × 328 mm Weight 9.2 kg ■ HDMI Input Output Video Resolution Audio Format Supported IN 1, IN 2, IN 3, IN 4 OUT 1080p Dolby True HD, DTS-HD Master Audio, DVD-Audio, DSD 3D, Audio Return Channel, DeepColor, x.v.Color
  • Onkyo HT-R648 | User Manual English - Page 75
    Memo En 75
  • Onkyo HT-R648 | User Manual English - Page 76
    Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 SN 29400913 (C) Copyright
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
AV Receiver
HT-R648
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction
...................................
2
Connections
.................................
11
Turning On & Basic Operations
......
19
Advanced Operations
.................
39
Controlling Other Components
....
53
Appendix
......................................
59
E
n