Onkyo HT-RC440 Owner Manual - Page 36
Using Headphones, En-36
View all Onkyo HT-RC440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Using Headphones 1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the PHONES jack. While the headphones plug is inserted in the PHONES jack, indicator lights. Note • Always turn down the volume before connecting your headphones. • While the headphones plug is inserted in the PHONES jack, the speakers are turned off. • When you connect a pair of headphones, the listening mode is set to Stereo, unless it's already set to Stereo, Mono, Direct. • If you connect an iPod or iPhone to the USB port on the AV receiver, no sound will be output from the headphones jack. Turning On & Basic Operations En-36
Turning On & Basic Operations
En-36
Using Headphones
1
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 mm) to the
PHONES
jack.
While the headphones plug is inserted in the
PHONES
jack,
=
indicator lights.
Note
•
Always turn down the volume before connecting your
headphones.
•
While the headphones plug is inserted in the
PHONES
jack, the speakers are turned off.
•
When you connect a pair of headphones, the listening mode
is set to Stereo, unless it’s already set to Stereo, Mono,
Direct.
•
If you connect an iPod or iPhone to the
USB
port on the AV
receiver, no sound will be output from the headphones jack.