Onkyo HT-RC440 Owner Manual - Page 50
Zone 2, Making Zone 2 Connections, Controlling Zone 2 Components
View all Onkyo HT-RC440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Zone 2 In addition to the main listening room, you can also enjoy playback in another room, or as we call Zone 2. And, you can select a different source for each room. Making Zone 2 Connections Connecting the Zone Speakers to an Additional Amplifier This setup allows 5.1-channel playback in your main listening room and 2-channel stereo playback in Zone 2. Main room TV AV receiver Controlling Zone 2 Components ■ Operating on the AV receiver ZONE 2 OFF Input selector buttons Advanced Operations 1 Press ZONE2, then point the remote controller at the AV receiver and press RECEIVER. Zone 2 turns on, the Z2 indicator lights on the AV receiver's display. 2 To select an input source for Zone 2, press ZONE2, followed by an INPUT SELECTOR button. 3 To turn off Zone 2, press ZONE2, followed by RECEIVER. The zone is turned off. 1 To turn on Zone 2 and select an input source, press ZONE 2 followed by an input selector button within 8 seconds. Zone 2 turns on, the Z2 indicator lights on the AV receiver's display. To select the same source as the main room's, press ZONE 2 twice. "Z2 Selector: Source" appears on the AV receiver's display. 2 To turn off Zone 2, press OFF. The zone is turned off. ■ Operating on the remote controller To control Zone 2, you must press ZONE2 on the remote controller first. Note • Only analog input sources are output by the ZONE 2 LINE OUT. Digital input sources are not output. If no sound is heard when an input source is selected, verify that the source is connected to an analog input. • You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room. Namely, if you have selected an FM station for the main room, that station will also be output in Zone 2. • When you have selected NET or USB as the input selector, the last selector selected will be set for Main room and Zone 2. • When Zone 2 is activated and its input selector is selected, the power consumption of standby mode slightly increases. • While Zone 2 is on, V functions will not work. • When setting the AV receiver to standby mode while Zone 2 is active, the Z2 indicator is dimly lit. Zone 2 IN R L Receiver/ integrated amp RECEIVER ZONE2 INPUT SELECTOR Note • The volume of Zone 2 must be set on the Zone 2 amplifier. En-50