Onkyo HT-S3500 Owner Manual - Page 33

Using the Home Menu The Home menu provides quick access to frequently used settings. You can change settings and view the current information. The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to other video outputs, use the AV receiver's display when changing settings. Note • The on-screen menus are displayed when: - There is no video input, or - The video input is 480p, 576p, 720p, 1080i, or 1080p. 1 Press RECEIVER followed by HOME. The Home menu will be superimposed on the TV screen. 2 Use R/X and ENTER to make the desired selection. ■ Input `You can select the input source. Use R/X to select the desired input source. Pressing ENTER switches to the selected input source. ■ Audio `You can change the following settings: "Bass", "Treble", "Subwoofer Level", "Center Level", "EX.BASS", "Late Night", "Music Optimizer", and "Cinema Filter". See also: • "Using the Audio Settings" (➔ page 46) ■ Info*1 ` You can view the information of the following items: "Input" and "Output". ■ Listening Mode*2 ` You can select the listening modes that are grouped in the following categories: "MOVIE/TV", "MUSIC" and "GAME". Use R/X to select the category and F/S to select the listening mode. Press ENTER to switch to the selected listening mode. Note *1 Depending on the input source and listening mode, not all channels shown here output the sound. *2 • This setting is not available in either of the following cases: -The "Audio TV Out" setting is set to "On" (➔ page 45). -"HDMI Ctrl (RIHD)" is set to "On" (➔ page 45) and you're listening through your TV speakers. Turning On & Basic Operations Selecting Speakers A and B You can use two sets of front speakers with the AV receiver: Speakers A for up to 5.1-channel playback in your main listening room and Speakers B for 2-channel stereo playback in another room. → 1 Press RECEIVER once followed by SP A/B repeatedly to cycle through the selection: Speakers A → Speakers A&B → Speakers B Off ← Speaker indicators and output channels are shown below. Speaker indicators Output channel A Speakers A: 5.1 channels AB B Speakers A: 2.1 channels*3 Speakers B: 2 channels Speakers B: 2 channels No sound *3 While Speakers B is on, channels are reduced to 2.1 in the main room. Tip • Alternatively, you can use the AV receiver's SPEAKERS A and B. En-33