Onkyo HT-S6300 Owner Manual - Page 39
Input/Output Assign, Explanatory Notes, Monitor Out, HDMI Input
View all Onkyo HT-S6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Explanatory Notes B Main menu Speaker Setup C ■ Subwoofer D ` Yes: Select if a subwoofer is connected. ` No: Select if no subwoofer is connected. B Menu selection C Setting target D Setting options (default setting underlined) Input/Output Assign Main Menu Input/Output Assign Monitor Out You can specify the output resolution for the HDMI OUT and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV. ■ Resolution ` Through: Select this to pass video through the AV receiver at the same resolution and with no conversion. ` Auto: Select this to have the AV receiver automatically convert video at resolutions not supported by your TV. ` 480p: Select this for 480p output and video conversion as necessary. ` 720p: Select this for 720p output and video conversion as necessary. ` 1080i: Select this for 1080i output and video conversion as necessary. ` 1080p: Select this for 1080p output and video conversion as necessary. HDMI Input If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign "HDMI2" to the "BD/DVD" input selector. If you've connected your TV to the AV receiver with an HDMI cable, composite video and component video sources can be upconverted* to HDMI. See "Video Connection Formats" for more information on video signal flow and upconversion (➔ 23). Composite video, component video IN HDMI Composite video, component video OUT Here are the default assignments. HDMI Input selector BD/DVD VCR/DVR CBL/SAT GAME AUX TUNER TV/CD PORT Default assignment HDMI1 HDMI2 HDMI3 HDMI4 Fixed) --------- ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PORT ` HDMI1, HDMI2, HDMI3, HDMI4: Select a corresponding HDMI input that the video component has been connected Select this to output composite video and component video sources from the HDMI OUT. The video signal from HDMI output is configured in "Component Video Input" (➔ 40). • Each HDMI input cannot be assigned to two input selectors or more. When HDMI1 - HDMI4 have already been assigned, you must set first any unused input selectors to or you will be unable to assign HDMI1 - HDMI4 to input selector. Note • When an HDMI IN is assigned to an input selector as explained here, the same HDMI IN will be set as a priority in the "Digital Audio Input" (➔ 40). In this case, if you want to use the coaxial or optical audio input, make the selection in the Audio Selector in the Audio menu (➔ 26). • "TUNER" selector cannot be assigned and is fixed at the option. • If you connect a component (such as UP-A1 Dock that seated iPod) to UNIVERSAL PORT jack, you cannot assign any input to "PORT" selector. • Do not assign the component connected with the HDMI input to "TV/CD" selector when you set "TV Control" setting to "On" (➔ 50). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed. En 39