Onkyo HT-S6300 Owner Manual - Page 57

Using the Onkyo Dock For the latest information on the Onkyo Dock components, see the Onkyo web site at: http://www.onkyo.com Before using the Onkyo Dock components, update your iPod with the latest software, available from the Apple web site. UP-A1 Dock With the supplied UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the AV receiver and enjoy great sound. You can use the AV receiver's remote controller to operate your iPod. ■ Compatible iPod models Made for: • iPod touch (1st and 2nd generation) • iPod classic • iPod (4th and 5th generation) • iPod nano (1st, 2nd, 3rd, 4th and 5th generation) • iPod mini • All iPhone models ■ Putting Your iPod in the Dock 1. Turn on the AV receiver, and select the PORT selector. 2. Align your iPod with the Dock connec- tor, and carefully place your iPod in the slot, as shown. Note • Remove the case, if fitted, from your iPod before inserting it into the UP-A1. ■ Adjusting the Adapter The adapter needs to be adjusted to match your particular iPod. If there's a gap between the back of your iPod and the adapter, turn the adapter counterclockwise to close the gap. Turning the adapter counterclockwise moves it forward. Turning it clockwise moves it backward. Forward Backward Note • Make sure that the output level of the AV receiver is set to mini- mum. • To prevent damage to the dock connector, don't twist your iPod when inserting or removing it, and be careful not to knock over the dock while your iPod is inserted. • Do not take off your iPod from the Dock when you play back the music, photo, or movie stored on your iPod. • Don't use the UP-A1 with any other iPod accessories, such as FM transmitters and microphones, because they may cause a malfunction. • It is recommended that you update your iPod software before using it with this unit. The updater for the iPod software is available at the Apple website. ■ Basic Operation The AV receiver may take several seconds to startup, so you might not hear the first few seconds of the first song. Auto Power On If you start iPod playback while the AV receiver is on Standby, the AV receiver will automatically turn on and select your iPod as the input source. Direct Change If you start iPod playback while listening to another input source, the AV receiver will automatically select your iPod as the input source. Using the AV receiver's Remote Controller You can use the AV receiver's remote controller to control basic iPod functions (➔ 58). ■ Operating Notes • Functionality depends on your iPod model and generation. • Before selecting a different input source, stop iPod playback to prevent the AV receiver from selecting the iPod input source by mistake. • If any accessories are connected to your iPod, the AV receiver may not be able to select the input source properly. • When connecting UP-A1 Dock to the radio tuner UP-HT1 with AUTO selected by the tuner's Mode Selector switch, you can switch the input source between UP-A1 Dock and the tuner, by pressing PORT repeatedly on the front panel. • While your iPod is in the UP-A1 Dock, its volume control has no effect. If you adjust your iPod models volume control while it's in the UP-A1 Dock, make sure it's not set too high before you reconnect your headphones. • The Auto Power On function will not work if you set your iPod in the UP-A1 Dock while it is playing. • When Zone 2 is turned on, you can't use Auto Power On and Direct Change functions. ■ Using Your iPod models Alarm Clock You can use your iPod models Alarm Clock function to automatically turn on your iPod and the AV receiver at a specified time. The AV receiver's input source will automatically be set to the PORT selector. Note • To use this function, your iPod must be in the UP-A1 Dock, and the UP-A1 Dock must be connected to the AV receiver. • This function only works when the Standard mode is set to On. • When you use this function, be sure to set the AV receiver's vol- ume control to a suitable level. • When Zone 2 is turned on, you can't use this function. • You cannot use this function for sound effects on your iPod. En 57