Onkyo HT-S6300 Owner Manual - Page 62

Resetting REMOTE MODE Buttons You can reset a REMOTE MODE to its default remote control code. 1 While holding down REMOTE MODE that you want to reset, press and hold down AUDIO until the remote indicator lights (about 3 seconds). 2 Within 30 seconds, press REMOTE MODE again. The remote indicator flashes twice, indicating that the button has been reset. Each of REMOTE MODE is preprogrammed with a remote control code. When a button is reset, its preprogrammed code is restored. Resetting the Remote Controller You can reset the remote controller to its default settings. 1 While holding down RECEIVER, press and hold down AUDIO until the remote indicator lights (about 3 seconds). 2 Within 30 seconds, press RECEIVER again. The remote indicator flashes twice, indicating that the remote controller has been reset. Controlling Other Components By pressing REMOTE MODE that's been programmed with the remote control code for your component, you can control your component as below. For details on entering a remote control code for other components, see "Entering Remote Control Codes" (➔ 61). Controlling a TV TV is preprogrammed with the remote control code for controlling a TV that supports the Q*1 (limited to some models). The TV must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. If controlling your TV via Q doesn't work very well, program your TV's remote control code into TV and use the TV remote mode to control your TV. Controlling a Blu-ray Disc/DVD Player, HD DVD Player or DVD Recorder BD/DVD is preprogrammed with the remote control code for controlling a component that supports the Q*1 (limited to some models). The component must be able to receive remote control commands via Q and be connected to the AV receiver via HDMI. *1 The Q supported by the AV receiver is the CEC system control function of the HDMI standard. En 62