Onkyo HT-S7200 Owner Manual

Onkyo HT-S7200 Manual

Get Onkyo HT-S7200 PDF manuals and user guides View all Onkyo HT-S7200 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo HT-S7200 manual content summary:

  • Onkyo HT-S7200 | Owner Manual - Page 1
    AV Receiver HT-RC160 Instruction Manual Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new
  • Onkyo HT-S7200 | Owner Manual - Page 2
    servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions . 12. Use only with the cart, stand, set 10 cm (4") away from the rear panel or
  • Onkyo HT-S7200 | Owner Manual - Page 3
    unit, have it checked by your Onkyo dealer. 8. Handling Notes • If This equipment has been tested and found to comply with the instructions, may the receiving antenna. • Increase the separation between the equipment and receiver. EST CONFORME À LA NORME NMB-003 DU CANADA. Sur les modèles dont la fiche
  • Onkyo HT-S7200 | Owner Manual - Page 4
    & two batteries (AA/R6) Speaker setup microphone Indoor FM antenna AM loop antenna Speaker cable labels (not supplied with the HT-S7200 Home Theater System.) * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same
  • Onkyo HT-S7200 | Owner Manual - Page 5
    Panel 10 Remote Controller 12 Installing the Batteries 12 Aiming the Remote Controller 12 Controlling the AV Receiver 13 About Home Theater 14 Enjoying Home Theater 14 Connection Connecting the AV Receiver 15 Connecting Your Speakers 15 Bi-amping the Front Speakers 18 Connecting Antenna
  • Onkyo HT-S7200 | Owner Manual - Page 6
    Onkyo for System Control • 4 Digital Inputs (2 Optical / 2 Coaxial) • Component Video Switching (2 Inputs/1 Output) • Front "Portable" Input for iPod and MP3 Players • Universal Port for the Dock for the iPod/HD Radio™*5 Dock • Dual Subwoofer Pre Out • Banana Plug-Compatible Speaker Set-
  • Onkyo HT-S7200 | Owner Manual - Page 7
    Multiroom Capability You can use two speaker systems with this AV receiver-a surround-sound speaker system (up to 7.1 channels) in your main listening room, a stereo speaker system in a second room, or Zone 2, as we call it. And, you can select a different audio source for each room. Main Room: In
  • Onkyo HT-S7200 | Owner Manual - Page 8
    button is used to set the AV receiver to On or Standby. 12) This sensor receives control signals from the remote controller. G Display See "Display" on page 9. H MOVIE/TV button (59) Selects the listening modes intended for use with movies SETUP button This button is used to access the onscreen setup
  • Onkyo HT-S7200 | Owner Manual - Page 9
    2EQ™ Room Correction and Speaker Setup microphone connects here. BC D E F G H For detailed information, see the pages in parentheses. B SLEEP indicator (52) Lights up when the Sleep function has been set. C MUTING indicator (52) Flashes while the AV receiver is muted. D Listening mode
  • Onkyo HT-S7200 | Owner Manual - Page 10
    to suit your setup. See "Digital Input Setup" on page 41 series Dock. J FRONT L/R, CENTER, SURR L/R, and SURR BACK L/R speakers speakers. See "Speaker Settings" on page 42. K V REMOTE CONTROL This V (Remote Interactive) jack can be connected to an V jack on another Onkyo AV component. The AV receiver
  • Onkyo HT-S7200 | Owner Manual - Page 11
    you can connect a cable/satellite receiver, settop box, etc. Input jacks subwoofer. The same signal is output from each jack. You can connect the powered subwoofer with two SUBWOOFER PREOUT jacks respectively. T FRONT HIGH L/R speakers These terminals are for connecting the front high L/R speakers
  • Onkyo HT-S7200 | Owner Manual - Page 12
    without V connection, point the remote controller at the other component to use it. • When you want to operate an Onkyo component with V connection or an -compatible compo- nent connected via HDMI (pages 90, 91), point the remote controller at the AV receiver's remote control sensor. 12
  • Onkyo HT-S7200 | Owner Manual - Page 13
    the AV receiver to On or Standby. C REMOTE MODE/INPUT SELECTOR buttons (50, 90-96) Selects the remote controller modes and the input sources. D Arrow [R]/[X]/[F]/[S] and ENTER buttons Used to select and adjust settings. E SETUP button Used to change settings. F LISTENING MODE buttons (59) Used to
  • Onkyo HT-S7200 | Owner Manual - Page 14
    to the AV receiver's superb capabilities, you can enjoy surround sound with a real sense of movement in your own home-just like being in a movie theater or concert hall. With DVDs you can enjoy DTS and Dolby Digital. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo
  • Onkyo HT-S7200 | Owner Manual - Page 15
    the best from your surround sound system, you need to set the speaker settings. You can do this automatically (see page 45) or manually (see page 67). Note: Front high and surround back speakers produce no sound at the same time. Attaching the Speaker Labels The AV receiver's positive (+) speaker
  • Onkyo HT-S7200 | Owner Manual - Page 16
    with the AV receiver's rear panel. Doing so may damage the AV receiver. 16 • Don't connect more than one cable to each speaker terminal. Doing so may damage the AV receiver. • Don't connect one speaker to several terminals. Connecting the Speaker Cables 1 Strip 1/2"-5/8" (12- 1/2"-5/8"(12-15 mm
  • Onkyo HT-S7200 | Owner Manual - Page 17
    the AV Receiver-Continued The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one surround back speaker, connect it to the left (L) SURR BACK SPEAKERS terminals. Surround back left speaker Surround back right speaker Surround
  • Onkyo HT-S7200 | Owner Manual - Page 18
    on the AV receiver, you must set the "Speaker Type" setting to "Bi speakers that support bi-amping. Refer to your speaker manual. Bi-amping Speaker Hookup 1 Connect the AV receiver's FRONT R positive (+) terminal to the right speaker's positive (+) Woofer (low) terminal. And connect the AV receiver
  • Onkyo HT-S7200 | Owner Manual - Page 19
    to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception. Keep the antenna as far away as possible from your AV Receiver, TV, speaker cables, and power cords. If you cannot achieve good reception with the supplied indoor AM loop antenna, try
  • Onkyo HT-S7200 | Owner Manual - Page 20
    TV reception, as this can cause interference problems. If circumstances demand it, use a TV/FM antenna splitter, as shown. Outdoor AM antennas work best when installed outside horizontally, but good results can sometimes be obtained indoors by mounting horizontally above a window. Note that the AM
  • Onkyo HT-S7200 | Owner Manual - Page 21
    Analog audio cable (RCA) Stereo mini plug cable The AV receiver does not support SCART plugs. Jack HDMI V OPTICAL L R Description HDMI connections can carry uncompressed standard- or high-definition digital video and audio and offer the best picture and sound quality. Component video separates the
  • Onkyo HT-S7200 | Owner Manual - Page 22
    support HDMI output of the above audio formats. ■ Onkyo for System Control , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver Set-top box is up to four. Do not connect the AV receiver to the other AV receiver /AV
  • Onkyo HT-S7200 | Owner Manual - Page 23
    down the AV receiver's volume. • The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there's no sound from a component connected via HDMI, check its setup. Refer to the connected component's instruction manual for
  • Onkyo HT-S7200 | Owner Manual - Page 24
    Audio Video Audio TV, projector, etc. DVD/BD player, etc. Speakers (see page 17 for connection information) Which Connections Should I Use? The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats
  • Onkyo HT-S7200 | Owner Manual - Page 25
    jack regardless of the output priority. The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V, or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings. Audio Connection Formats Audio equipment can be
  • Onkyo HT-S7200 | Owner Manual - Page 26
    , or c ), and then make the connection. The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V, or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings. • With connection a , you can listen to and record
  • Onkyo HT-S7200 | Owner Manual - Page 27
    left and right outputs and multichannel left and right outputs, be sure to use the main left and right outputs for connection a . Connection A B a b c AV receiver COMPONENT VIDEO IN 1 (DVD/BD) DVD/BD IN V DVD/BD IN L/R DIGITAL IN COAXIAL 1 (DVD/BD) DIGITAL IN OPTICAL 1 (GAME) Signal flow DVD
  • Onkyo HT-S7200 | Owner Manual - Page 28
    or DVD/BD Recorder for Playback Hint! With this hookup, you can use your VCR's tuner to listen to your favorite TV programs via the AV receiver, useful if your TV has no audio outputs. Step 1: Video Connection Choose a video connection that matches your VCR or DVD/BD recorder ( A or B ), and then
  • Onkyo HT-S7200 | Owner Manual - Page 29
    from your TV or playback VCR to the recording VCR without going through the AV receiver, connect the TV/VCR's audio and video outputs directly to the recording VCR's audio and video inputs. See the manuals supplied with your TV and VCR for details. • Video signals connected to composite video
  • Onkyo HT-S7200 | Owner Manual - Page 30
    Connecting the AV Receiver-Continued Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source Hint! With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs via the AV receiver, useful if your TV has no audio outputs. Step 1:
  • Onkyo HT-S7200 | Owner Manual - Page 31
    Console Step 1: Video Connection Choose a video connection that matches the game console ( A or B ), and then make the connection. You must connect the AV receiver to your TV with the same type of connection. Step 2: Audio Connection Choose an audio connection that matches the game console ( a or
  • Onkyo HT-S7200 | Owner Manual - Page 32
    Composite video output Analog audio L/R output Step 1: Make the audio connection a . AUX INPUT PORTABLE a Portable Audio Player AUDIO LINE OUT Connection a AV receiver AUX INPUT PORTABLE Signal flow ⇐ Portable Audio Player Analog audio line output Note: When it is connected at the same time
  • Onkyo HT-S7200 | Owner Manual - Page 33
    To connect the CD player digitally, use connection b or c . (To record or listen in Zone 2 as well, use a and b , or a and c .) Connection a b c AV receiver CD IN L/R DIGITAL IN COAXIAL 1 (DVD/BD) DIGITAL IN OPTICAL 2 (CD) Signal flow ⇐ ⇐ ⇐ CD or turntable Analog audio L/R output Digital coaxial
  • Onkyo HT-S7200 | Owner Manual - Page 34
    you can play and record and listen in Zone 2. • To connect the recorder digitally for playback, use connections a and b , or a and c . Connection a b c AV receiver TV/TAPE IN L/R TV/TAPE OUT L/R DIGITAL IN COAXIAL 2 (CBL/SAT) DIGITAL IN OPTICAL 1 (GAME) Signal flow ⇐ ⇒ ⇐ ⇐ Cassette, CDR, MD, or
  • Onkyo HT-S7200 | Owner Manual - Page 35
    RI Dock, see the RI Dock's instruction manual. ■ If Your iPod Supports Video: Connect your RI Dock's audio output jacks to the AV receiver's GAME IN or VCR/DVR IN L/R jacks, and connect its video output jack to the AV receiver's GAME IN or VCR/DVR IN V jacks. (Onkyo DS-A2 hookup shown below.) GAME
  • Onkyo HT-S7200 | Owner Manual - Page 36
    either one to the AV receiver. The other jack is for connecting additional V-capable components. • Connect only Onkyo components to V jacks. Connecting other manufacturer's components may cause a malfunction. • Some components may not support all V functions. Refer to the manuals supplied with your
  • Onkyo HT-S7200 | Owner Manual - Page 37
    easy steps to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once. ■ Do the 2EQ Room Correction and Speaker Setup-this is essential! See "Audyssey 2EQ™ Room Correction and Speaker Setup" on page 45. ■ Have you connected a component
  • Onkyo HT-S7200 | Owner Manual - Page 38
    for the very first time. Using the Display to change the settings RECEIVER The settings of the AV receiver can be changed using the Display. ENTER SETUP RXFS 1 Press the [RECEIVER] button fol- lowed by the [SETUP] button. The main menu item appears on the display. Using the Onscreen
  • Onkyo HT-S7200 | Owner Manual - Page 39
    input to the TV/TAPE selector when you set "TV Control" setting to "On" (see page 79). Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 39
  • Onkyo HT-S7200 | Owner Manual - Page 40
    : • If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to PORT selector. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 3 Use the Up and
  • Onkyo HT-S7200 | Owner Manual - Page 41
    setting and HDMI Input setting (see page 39). Press the [SETUP] button. The setup menu closes. 3 Use the Up and Down [R]/[X] buttons to select "3. Digital Audio Notes: Input", and then press [ENTER]. • If you connect an input component (such as UP-A1 The "Digital Audio Input" menu series
  • Onkyo HT-S7200 | Owner Manual - Page 42
    and then press [ENTER]. See "Zone 2" on page 82. The "Speaker Settings" menu appears. Note: This procedure can also be performed on the AV receiver 2-1. Speaker Settings by using its [SETUP] button, arrow buttons, and Speaker Type Powered Zone 2 Surr Back/Front High Normal Not Act Surr Back
  • Onkyo HT-S7200 | Owner Manual - Page 43
    Note that when this setting is changed, all radio presets are deleted. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main 5 Press the [SETUP] button. The setup menu closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow
  • Onkyo HT-S7200 | Owner Manual - Page 44
    First Time Setup-Continued Changing the Input Display If you connect an V-capable Onkyo RI Dock to the TV/TAPE IN, GAME IN or VCR/DVR IN jacks, for V to work properly, you must change this setting. This setting can only be changed on the AV receiver. GAME TV/TAPE Notes: • DOCK can be selected for
  • Onkyo HT-S7200 | Owner Manual - Page 45
    , surround impression, and dialog clarity remain the same whether watching movies, flipping between television channels, or changing from stereo to surround sound content. Measurement Positions To create a listening environment in your home theater that all listeners will enjoy, Audyssey 2EQ takes
  • Onkyo HT-S7200 | Owner Manual - Page 46
    to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver's display when changing settings. 1 46 Turn on the AV receiver and the connected TV. On the TV, select the input to which the AV receiver is connected. Set the speaker setup microphone at the Main Listening Posi- tion 1 (page 45
  • Onkyo HT-S7200 | Owner Manual - Page 47
    step 5. When the measurements are complete, the following screen appears. 2EQ: Auto Setup Calculating... When the calculations are complete, the following screen appears. 2EQ: Auto Setup Review Speaker Configuration Subwoofer Front Center Surround Front High Surr Back Surr Back Ch Save Cancel
  • Onkyo HT-S7200 | Owner Manual - Page 48
    -Continued 10 Disconnect the speaker setup microphone. 2EQ: Auto Setup Please unplug setup microphone. Notes: • When the room correction and speaker setup is complete, the "Equalizer Settings" (page 69) will be set to "Audyssey" and the "Dynamic EQ" (page 71) will be set to "On". • You can cancel
  • Onkyo HT-S7200 | Owner Manual - Page 49
    saving again. If this message appears after 2 or 3 attempts, the AV receiver is probably malfunctioning. Contact your Onkyo dealer. Retry: Return to step 2 and try again. Cancel: Cancel the room correction and speaker setup. Changing the Speaker Settings Manually If you wish to make changes to the
  • Onkyo HT-S7200 | Owner Manual - Page 50
    AV component that you want to listen to or watch). MASTER VOLUME INPUT SELECTOR RECEIVER VOL R/X INPUT SELECTOR 1 AV receiver Remote controller or Use the AV receiver button. The volume can be set to Min, 1 through 79, or Max. The AV receiver is designed for home theater enjoyment. It has a
  • Onkyo HT-S7200 | Owner Manual - Page 51
    the bass and treble for the front speakers, except when the Direct listening mode is selected. 1 AV receiver Press the [TONE] button repeatedly to select reappears. Setting the Display Brightness You can adjust the brightness of the AV receiver's display. Remote controller Press the [RECEIVER]
  • Onkyo HT-S7200 | Owner Manual - Page 52
    . The Mute function is cancelled when the AV receiver is set to Standby. Notes: • Always turn down the volume before connecting your headphones. • While the headphones plug is inserted in the PHONES jack, the speakers are turned off. (The Powered Zone 2 speakers are not turned off.) • When you
  • Onkyo HT-S7200 | Owner Manual - Page 53
    model changes FM/AM frequency in 200k/10k (or 50k/9k) Hz steps. In Manual Tuning mode, FM stations will be in mono. Tuning into weak FM stereo stations , it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono. ■ Tuning into Stations by
  • Onkyo HT-S7200 | Owner Manual - Page 54
    . 1 Tune into the AM/FM station that you want to store as a preset. 2 Press the [MEMORY] button. The preset number flashes. AV receiver To select a preset, use the PRESET [F]/[S] buttons, or the remote controller's CH [+/-] button. Remote controller 3 While the preset number is flash
  • Onkyo HT-S7200 | Owner Manual - Page 55
    supported by the UP-A1 series Dock, see the UP-A1 series Dock's instruction manual. Note: Before using the UP-A1 series Dock, update your iPod with the latest software, available from the Apple Web site. Putting Your iPod in the Dock 1 Turn on the AV receiver of the AV receiver is set to minimum.
  • Onkyo HT-S7200 | Owner Manual - Page 56
    series Dock, and the UP-A1 series Dock must be connected to the AV receiver. • When you use this function, be sure to set the AV receiver's volume control to a suitable level. • The AV receiver PORT jack. • See to the Dock's instruction manual for more infor- mation. You can control your
  • Onkyo HT-S7200 | Owner Manual - Page 57
    [] button Stops playback and displays a menu. P RANDOM button Used with the shuffle function. Status messages ❏ The AV receiver is checking the connection with the dock ❏ The AV receiver does not support the connected dock ❏ UP-A1 series Dock is connected Your iPod is properly stationed in a UP-A1
  • Onkyo HT-S7200 | Owner Manual - Page 58
    input selector buttons to select the source that you want to record. You can watch the source while record- ing. The AV receiver's MASTER VOL- UME control has no effect on recording. Recording Separate AV Sources Here you can record audio and video from completely separate sources, allowing
  • Onkyo HT-S7200 | Owner Manual - Page 59
    can only select the Mono, Direct, or Stereo listening mode. Selecting on the AV receiver LISTENING MODE buttons ■ LISTENING MODE buttons [MOVIE/TV] button This button selects the listening modes intended for use with movies and TV. [MUSIC] button This button selects the listening modes intended for
  • Onkyo HT-S7200 | Owner Manual - Page 60
    FHR FL C FR SW Front high R Speaker Front R Speaker Subwoofer Surround L SL Speaker SR Surround R Speaker Surround back Surround back SBL SBR R Speaker L Speaker C : active in the speaker settings C : non-active in the speaker settings Mono/Multiplex Sources Listening Mode Button
  • Onkyo HT-S7200 | Owner Manual - Page 61
    AllChStereo ✔ ✔ ✔*1 FullMono ✔ ✔ ✔*1 T-D (TheaterDimensional) ✔ ✔ ✔ ✔ Notes: *1 Which Front high speakers or Surround back speakers outputs the sound is switched by the "SpLayout" setting on page 73. *2 If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro
  • Onkyo HT-S7200 | Owner Manual - Page 62
    Master Audio/ DTS Express/ DSD*2 Neo:6 PLIIx Movie PLIIx Music PLIIz Height DolbyEX Orchestra Unplugged Studio-Mix speakers or Surround back speakers outputs the sound is switched by the "SpLayout" setting on page 73. *2 AV receiver can input the DSD signal from HDMI IN. Setting the output setting
  • Onkyo HT-S7200 | Owner Manual - Page 63
    Discrete/Matrix Sources DTS-ES Discrete DTS-ES Matrix ✔ (Surround Back) ✔ (Surround Back) Notes: *1 Which Front high speakers or Surround back speakers outputs the sound is switched by the "SpLayout" setting on page 73. *2 When the input source contains the encoded front high channel, front high
  • Onkyo HT-S7200 | Owner Manual - Page 64
    AV receiver's listening modes can transform your listening room into a movie theater front left and right speakers and subwoofer. Mono Use this mode when watching an old movie with a mono soundtrack the latest multichannel audio format from Dolby. It supports up to 7.1 channels with 48 kHz sampling
  • Onkyo HT-S7200 | Owner Manual - Page 65
    this mode with any stereo movie (e.g., TV, DVD, from DTS. It supports up to 7.1 channels servers. DSD DSD stands for Direct Stream multichannel audio. Onkyo Original DSP Modes simulates Theater-Dimensional) With this mode you can enjoy a virtual surround sound even with only two or three speakers
  • Onkyo HT-S7200 | Owner Manual - Page 66
    a convenient way to change the AV receiver's various settings. Settings are organized into nine categories on the main menu, most containing a submenu. Main menu Submenus Menu 1. Input Assign 2. Speaker Setup 3. Audio Adjust 4. Source Setup 5. Listening Mode Preset 6. Miscellaneous 7. Hardware
  • Onkyo HT-S7200 | Owner Manual - Page 67
    , or set them manually, which is useful if you change one of the connected speakers after using the Audyssey 2EQ Room Correction and Speaker Setup function. Note: The Speaker Setup cannot be carried out while headphones are connected to the AV receiver. Speaker Settings See "Speaker Settings" on
  • Onkyo HT-S7200 | Owner Manual - Page 68
    cannot be selected. *9 This function can be set only if the "Subwoofer" setting is set to "Yes", and the "Front" setting is set to "Full Band". Speaker Distance This setting is set automatically by the Audyssey 2EQ Room Correction and Speaker Setup function (see page 45). Here you can specify
  • Onkyo HT-S7200 | Owner Manual - Page 69
    levels can be adjusted from -12 to +12 dB in 1 dB steps (-15 to +12 dB for the subwoofer). Note: Speakers that you set to "No" or "None" in the "Speaker Configuration" (page 67) do not output the test tone. Note: The speakers cannot be calibrated while the output of the AV receiver is muted. Tip: If
  • Onkyo HT-S7200 | Owner Manual - Page 70
    speakers are connected. This setting is effective with Dolby Digital, Dolby Digital Plus and Dolby TrueHD only. Notes: • If the "Surr Back" Setting is set to "None" (page 67), this setting cannot be selected. • If the "Front High" Setting is set to other than "None", this setting is fixed at "Manual
  • Onkyo HT-S7200 | Owner Manual - Page 71
    . Note: After the room correction and speaker setup is completed, even if Equalizer Setting is set to other than "Audyssey", when Dynamic EQ is set to "On", Equalizer Settings is set to "Audyssey". When Dynamic Volume is set to effective, Equalizer Setting is set to "Audyssey" and Dynamic EQ is
  • Onkyo HT-S7200 | Owner Manual - Page 72
    on the AV receiver by using its [TONE], [-], and [+] buttons. Late Night Function With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels-ideal for watching movies late at night
  • Onkyo HT-S7200 | Owner Manual - Page 73
    by using [GUIDE/TOP MENU] button. Speaker Levels You can adjust the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the AV receiver is set to Standby. Subwfr (Subwoofer) -15 dB to +12 dB (default: 0 dB) Center -12 dB to +12 dB (default
  • Onkyo HT-S7200 | Owner Manual - Page 74
    the AV receiver has been set to Standby. 1 Press the [RECEIVER] button followed by the [SETUP] button series Dock that seated iPod) to the UNIVERSAL PORT jack, you can assign only "Analog" listening mode to PORT selector. • This procedure can also be performed on the AV receiver by using its [SETUP
  • Onkyo HT-S7200 | Owner Manual - Page 75
    section explains items on the "Source Setup" menu. Items can be set individually for each input selector. 1 Press the input selector buttons to select an input source, and then press the [RECEIVER] button. 2 Press the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear
  • Onkyo HT-S7200 | Owner Manual - Page 76
    , erase the custom name by entering an empty white space for each letter. • This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons. 1234567890 [ ] \ SP Back OK (Left)/ (Right): Selected when the cursor is moved within the Name input area
  • Onkyo HT-S7200 | Owner Manual - Page 77
    if there's a volume difference between your speakers and your headphones. The headphones level can be set from -12 dB to +12 dB. OSD Setup ■ Immediate Display This preference determines whether operation details are displayed onscreen when an AV receiver function is adjusted. On: Displayed (default
  • Onkyo HT-S7200 | Owner Manual - Page 78
    the sound will be output by the AV receiver's front left and right speakers. To stop the AV receiver's speakers producing sound, change the settings, change your TV's settings, or turn down the AV receiver's volume. ■ Lip Sync The AV receiver can be set to automatically correct any delay between the
  • Onkyo HT-S7200 | Owner Manual - Page 79
    the setting to "Disable". • Refer to the connected component's instruction manual for details. ■ HDMI Control (RIHD) This function allows -compatible components connected via HDMI to be controlled with the AV receiver. Off: disabled (default). On: enabled. Notes: • , which stands for
  • Onkyo HT-S7200 | Owner Manual - Page 80
    and Right [F]/[S] buttons to change the setting. Repeat this step for the other settings. ■ Resolution (Reso) You can specify the output resolution for the HDMI outputs and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV. See the "Video
  • Onkyo HT-S7200 | Owner Manual - Page 81
    you have assigned a digital input jack (see page 41). Normally, the AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS: • If the beginnings of tracks
  • Onkyo HT-S7200 | Owner Manual - Page 82
    Hookup • Connect your Zone 2 speakers to the AV receiver's ZONE 2 L/R speaker terminals. Main room AV receiver TV AV receiver Zone 2 R Zone 2 IN R L Receiver/ integrated amp Note: The Zone 2 volume must be set on the Zone 2 amp. L Notes: • With this setup, the Zone 2 volume is controlled
  • Onkyo HT-S7200 | Owner Manual - Page 83
    If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" on page 82, you must set the "Powered Zone 2" setting to "Act" (Acti- vated). 1 Press the [RECEIVER] button followed by the [SETUP] button. The main menu
  • Onkyo HT-S7200 | Owner Manual - Page 84
    Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 from the AV receiver ZONE 2 OFF Controlling Zone 2 with the Remote Controller ON/ STANDBY INPUT SELECTOR ZONE2 Note: To control Zone 2, you must press the remote controller
  • Onkyo HT-S7200 | Owner Manual - Page 85
    button. AV receiver On the AV receiver, press the [ZONE 2] button, and then use the [-]/[+] buttons. If your Zone 2 speakers are connected to a receiver or be unmuted by adjusting the volume. • When the "Powered Zone 2" setting is set to "Act" and the input selector of Zone 2 is selected, power
  • Onkyo HT-S7200 | Owner Manual - Page 86
    V (page 96) Onkyo Dock (page 95) Looking up for Remote Control Code You can look up for appropriate remote control code 5 from onscreen setup menu. Note: This setting can be carried out by using Onscreen Setup Menu only. 1 Press the [RECEIVER] button followed by the [SETUP] button. The main
  • Onkyo HT-S7200 | Owner Manual - Page 87
    "Not Listed", and then press [ENTER]. The brand name input panel appears. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 7 Use the Up and Down [R]/[X] buttons to select brand, and then press [ENTER]. After searching
  • Onkyo HT-S7200 | Owner Manual - Page 88
    ] and [ZONE 2] buttons. • Only TV remote control codes can be entered for the [TV] button. • Apart from the [RECEIVER], [TV], and [ZONE 2] buttons, remote control codes from any category can be entered for the REMOTE MODE buttons. However, these buttons also work as input
  • Onkyo HT-S7200 | Owner Manual - Page 89
    button, point the remote controller at the AV receiver, and operate the component. If you want to control an Onkyo component by pointing the remote controller directly at can reset the remote controller to its default settings. 1 While holding down the [RECEIVER] button, press and hold down the [
  • Onkyo HT-S7200 | Owner Manual - Page 90
    remote mode to control your TV. Press [TV] button first B K L B C M D E N F G O P H I J Q *1 The supported by the AV receiver is the CEC system control function of the HDMI standard. B ON/STANDBY, TV [] buttons Set the TV to On or Standby. C TV VOL [R]/[X] button Adjust the TV
  • Onkyo HT-S7200 | Owner Manual - Page 91
    remote control code for controlling an Onkyo DVD player. For details on entering *1 The supported by the AV receiver is the CEC system control function of the HDMI standard. B ON/STANDBY button Sets the DVD/ select items. H SETUP button Used to access the DVD/BD player's settings. I buttons
  • Onkyo HT-S7200 | Owner Manual - Page 92
    Set the TV to On or Standby. D TV [INPUT] button Selects the TV's external inputs. E TV VOL [R]/[X] button Adjust the TV's volume. F GUIDE button Displays the program guide or navigation list. G Arrow [R]/[X]/[F]/[S] and ENTER buttons Used to navigate menus and select items. H SETUP the AV receiver.
  • Onkyo HT-S7200 | Owner Manual - Page 93
    E M N O F G P B ON/STANDBY button Set the component to On or Standby. C GUIDE button Displays the onscreen program guide. D Arrow [R]/[X]/[F]/[S] and ENTER buttons Used to navigate menus and select items. E SETUP button Displays the setup menu. F SEARCH, REPEAT, RANDOM, and PLAY MODE buttons
  • Onkyo HT-S7200 | Owner Manual - Page 94
    to On or Standby. C Arrow [R]/[X]/[F]/[S] and ENTER buttons* Used to navigate menus and select items. D SETUP button* Used to access the Onkyo CD player's settings. E buttons Play, Pause, Stop, Rewind, Fast forward, Previous, and Next. F REPEAT button Used with the repeat playback function
  • Onkyo HT-S7200 | Owner Manual - Page 95
    Connect the RI Dock to the TV/TAPE IN, VCR/DVR IN, or GAME IN L/R jacks. • Set the RI Dock's RI MODE switch to HDD or HDD/ DOCK. • Set the AV receiver's Input Display to DOCK (see page 44). • See to the Dock's instruction manual for more infor- mation. Press the appropriate REMOTE MODE button first
  • Onkyo HT-S7200 | Owner Manual - Page 96
    with the remote control code for controlling an Onkyo cassette recorder when used with an V connection. AV receiver. H VOL [R]/[X] button (50) Adjusts the volume of the AV receiver. I Stop [] button Stops playback. Note: An Onkyo cassette recorder connected via V can also be controlled in Receiver
  • Onkyo HT-S7200 | Owner Manual - Page 97
    16). • Make sure that the input source is properly selected (page 50). • Make sure that the speaker cables are not shorting. • Check the volume. The AV receiver is designed for home theater enjoyment. It has a wide volume range, allowing precise adjustment. • While a pair of headphones is connected
  • Onkyo HT-S7200 | Owner Manual - Page 98
    subwoofer produces no sound. • Make sure the speakers are configured correctly (page 67). There's no sound with a certain signal format • Check the digital audio output setting on the con- nected device. On some game consoles, such as those that support DVD, the default setting AV receiver remains
  • Onkyo HT-S7200 | Owner Manual - Page 99
    sure you've entered the correct remote control code (page 88). • Make sure to set the same ID on both the AV receiver and remote controller (page 78). Can't control other components • If it's an Onkyo component, make sure that the V cable and analog audio cable are connected properly. Connecting
  • Onkyo HT-S7200 | Owner Manual - Page 100
    the component and AV receiver, even if they are connected digitally (page 36). The functions Auto Power On/Standby and Direct Change don't work for components connected via V • These functions don't work when Zone 2 is turned on. When performing "Audyssey 2EQ™ Room Correction and Speaker Setup", the
  • Onkyo HT-S7200 | Owner Manual - Page 101
    H × D) 435 × 176 × 329 mm (17-1/8" × 6-15/16" × 12-15/16") Weight 10.8 kg (23.8 lbs.) ■ Video Inputs HDMI Component Composite Subwoofer Pre Outputs 2 Speaker Outputs Main (L, R, C, SL, SR, SBL, SBR) + ZONE2 (L, R)/ Front High (L, R) Phones 1 ■ Control Terminal MIC Yes Specifications
  • Onkyo HT-S7200 | Owner Manual - Page 102
    Video Resolution Chart The following tables show how video signals at different resolutions are output by the AV receiver. ✔: Output Output HDMI COMPONENT COMPOSITE Input 1080p (60Hz/24Hz) 1080i 720p 480p 480i 1080i 720p 480p 480i 480i 1080p ✔ 1080i ✔ HDMI 720p ✔ 480p ✔
  • Onkyo HT-S7200 | Owner Manual - Page 103
    Memo 103
  • Onkyo HT-S7200 | Owner Manual - Page 104
    Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO ONKYO CHINA LIMITED Unit 1&12,
  • Onkyo HT-S7200 | Owner Manual - Page 105
    et utilisation Fr-10 Instalación y uso ....... Es-10 Instruction Manual Thank you for purchasing an Onkyo home theater speaker package. Please read this manual thoroughly before using your new speakers. Following the instructions in this manual will enable you to obtain optimum performance and
  • Onkyo HT-S7200 | Owner Manual - Page 106
    servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions . 12. Use only with the cart, stand, set 10 cm (4") away from the rear panel or
  • Onkyo HT-S7200 | Owner Manual - Page 107
    FOND. Getting Started Important Safety Instructions 2 Precautions 3 Speaker Precautions 4 Package Contents 5 Enjoying Home Theater 6 Getting to know Your Speaker Package 7 Installing & Using Connecting the Speakers 10 Appendix Troubleshooting 12 Specifications 13 Universal Port Option Dock
  • Onkyo HT-S7200 | Owner Manual - Page 108
    on. 4. Amplifier oscillation. 5. Special test tones from audio test CDs and so on. 6. Thumps are using a chemical cloth, always follow the instructions that come with the cloth. For dust accumulated the power cord, connect all of your speakers and AV components. • Turning on the SKW-770 may
  • Onkyo HT-S7200 | Owner Manual - Page 109
    center speaker Surround back speakers (SKB-770) Subwoofer (SKW-770) 2 speaker bases and 8 screws Dock for iPod UP-A1 (White) (Red) Speaker cables for front speakers 11 ft. (3.5 m) * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and
  • Onkyo HT-S7200 | Owner Manual - Page 110
    home - just like being in a movie theater or concert hall. Front left and right speakers (SKF-770) These output the main sound. Their role in a home theater find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various
  • Onkyo HT-S7200 | Owner Manual - Page 111
    Keyhole slots These keyhole slots can be used to wall-mount the speaker (see page 11). C Speaker terminals These push terminals are for connecting the speaker to the AV receiver with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification. Simply connect each
  • Onkyo HT-S7200 | Owner Manual - Page 112
    to tip over. • Be sure to tighten the screws when you attach the speaker bases. • Attach the speaker bases on a flat, level, and stable floor. • After you attach the speaker bases, make sure that the speakers stand upright and are stable. Top of SKF-770 Protection cover Supplied screws Arrow mark
  • Onkyo HT-S7200 | Owner Manual - Page 113
    bass sounds are evenly balanced with the treble sounds from the other speakers. Because our ears are less sensitive to very low bass sounds, there's a temptation to set the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what you think is the optimal level, and then
  • Onkyo HT-S7200 | Owner Manual - Page 114
    the supplied RCA cable, connect the subwoofer's LINE INPUT to your receiver's PRE OUT: SUBWOOFER. HT-S7200: If you are using an Onkyo HT-S7200 system, you can connect the powered subwoofer with two PRE OUT: SUBWOOFER jacks respectively. When using a single subwoofer, you can connect either jack. The
  • Onkyo HT-S7200 | Owner Manual - Page 115
    damage the flooring. To prevent this, place the supplied pads underneath the subwoofer's feet. The pads also provide a stable base for the subwoofer. 7-7/8" (200 mm) Pad Caution: A mounting screw's ability to support a speaker depends on how well it's anchored to the wall. If you have hollow
  • Onkyo HT-S7200 | Owner Manual - Page 116
    properly connected to the subwoofer's LINE INPUT. Slightly increase the subwoofer pre out output level on your AV receiver. The Subwoofer configuration is not set Check the subwoofer setting in the speaker correctly. configuration on your AV receiver. The subwoofer produces The source material
  • Onkyo HT-S7200 | Owner Manual - Page 117
    Specifications ■ Powered Subwoofer (SKW-770) Type: Bass-reflex Input sensitivity/impedance: Power supply: AC 120 V, 60 Hz Power consumption: 163 W Other: Auto Standby function ■ Front Speakers (SKF-770) Type: 2 Way Bass-reflex Impedance: 6 Ω Maximum input power: 130 W Sensitivity
  • Onkyo HT-S7200 | Owner Manual - Page 118
    dropped. 11. Damage Requiring Service Unplug the apparatus from the AV receiver and refer servicing to qualified service personnel under the following by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment
  • Onkyo HT-S7200 | Owner Manual - Page 119
    has been tested and found to connected to an Onkyo Universal Portcapable AV receiver, you can software, available from the Apple Web site at: www.apple.com • For the latest information on the UP-A1, see the Onkyo Web site at: www.onkyo.com • The instructions in this manual connect specifically to
  • Onkyo HT-S7200 | Owner Manual - Page 120
    Onkyo AV receiver as shown. Onkyo AV receiver About Operation Functionality depends on your iPod or iPhone model and generation and your AV receiver may cause a malfunction. Troubleshooting There's no sound • . • Make sure your AV receiver is turned on, the correct or receiver, try moving the
  • Onkyo HT-S7200 | Owner Manual - Page 121
    Memo En-17
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
E
n
AV Receiver
HT-RC160
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction
...................................
2
Connection
..................................
15
Turning On & First Time Setup
.....
37
Basic Operations
.........................
50
Using the Listening Modes
........
59
Advanced Setup
..........................
66
Zone 2
.........................................
82
Controlling Other Components
....
86
Others
...........................................
97