Onkyo M-5000R Owner Manual
Onkyo M-5000R Manual
 |
View all Onkyo M-5000R manuals
Add to My Manuals
Save this manual to your list of manuals |
Onkyo M-5000R manual content summary:
- Onkyo M-5000R | Owner Manual - Page 1
Instruction Manual Power Amplifier M-5000R En - Onkyo M-5000R | Owner Manual - Page 2
apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen - Onkyo M-5000R | Owner Manual - Page 3
Onkyo dealer. 8. Handling Notes • If you need to transport this unit, use has been tested and found uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions For models having a power cord with a LA NORME NMB-003 DU CANADA. Sur les modèles dont - Onkyo M-5000R | Owner Manual - Page 4
and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding - Onkyo M-5000R | Owner Manual - Page 5
Before using the power amplifier M-5000R, be sure to read the page above entitled Important Safety Instructions and this page of Amplifier Precautions. Ventilation While using the M-5000R, the internal temperature will fairly rise. Excessive temperature rise may affect the amplifier performance - Onkyo M-5000R | Owner Manual - Page 6
that you should never perform. • Do not use the M-5000R as a broadcast system or musical instrument amplifier. • Never use a generator, DC/AC converter, AC/AC converter, or transformer to supply power for the M-5000R. • Never perform a "thumb test" (checking whether current is reaching the lead - Onkyo M-5000R | Owner Manual - Page 7
2 Channels Driven, IEC) • A WRAT (Advanced Wide Range Amplifier Technology) • DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry) • Quad Construction to Reduce Vibration • Bi-Amping and BTL (MONO) Capability • XLR Input for Monaural Amplification with BTL Mode • Gold-Plated, Machined - Onkyo M-5000R | Owner Manual - Page 8
greater efficiency to the M-5000R power amp by employing a low-NFB design to maintain voltage stability and enhance transient response. Extremely sensitive to oscillations, this circuitry requires very advanced control technology in order to be incorporated into the amplifier. Breaking further new - Onkyo M-5000R | Owner Manual - Page 9
Block Diagram DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry) En 9 - Onkyo M-5000R | Owner Manual - Page 10
name indicates the color. Specifications and operations are the same regardless of color. Thank you for purchasing an Onkyo Power Amplifier. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain - Onkyo M-5000R | Owner Manual - Page 11
Connecting the Power Cord 16 Connecting a Preamplifier 17 Turning On & Basic Operations Basic Operations...20 Turning On the Power Amplifier 20 Turning Off the Power Amplifier 20 Switching the Power Meter Range 21 Setting Auto Standby (ASb 21 Others Troubleshooting ...22 Specifications ...23 - Onkyo M-5000R | Owner Manual - Page 12
30 seconds before the ASb function starts running. D ON/STANDBY button (➔ 20) This button is used to set the power amplifier to On or Standby. En 12 E POWER switch (➔ 20) This is the main power switch. When set to OFF, the power amplifier is completely shutdown. It must be set to ON to set the - Onkyo M-5000R | Owner Manual - Page 13
. It may damage the power amplifier. F AUTO STANDBY switch You can use the Auto Standby (ASb) function. If the power amplifier receives no signal for 3 the power amplifier will not automatically turn on even if it receives the signal. To turn on the power amplifier, press ON/STANDBY manually. You - Onkyo M-5000R | Owner Manual - Page 14
. Position it so that its weight is evenly dispersed on its four legs. Do not install the power amplifier in a place with vibration or an unstable location. The power amplifier is designed to have high conversion efficiency, however, its temperature will become much higher than other audio equipment - Onkyo M-5000R | Owner Manual - Page 15
. Refer to the instruction manual supplied with the control amplifier and verify that its output jack is compatible with the pin assignments for this jack. The output jack of the AV controller PR-SC5508 is compatible with the pin assignments for the jack of the amplifier. Wrong! The power amplifier - Onkyo M-5000R | Owner Manual - Page 16
circuit. If this is a problem, plug the power amplifier into a different branch circuit. • Do not use a power cord other than the one supplied with the power amplifier. The supplied power cord is designed exclusively for use with the power amplifier and should not be used with any other equipment. - Onkyo M-5000R | Owner Manual - Page 17
Connecting a Preamplifier Stereo Connection Preamplifier P-3000R Power Amplifier M-5000R Right speaker Left speaker This is an example of the stereo connection using the preamplifier P-3000R. Note • Set the INPUT SELECT switch to RCA side. En 17 - Onkyo M-5000R | Owner Manual - Page 18
Bi-amping Connection Preamplifier P-3000R Power Amplifier M-5000R Tweeter (high) Woofer (low) Power Amplifier M-5000R Right speaker Left speaker This is an example of the bi-amping connection using the preamplifier P-3000R. Note • Set the INPUT SELECT switch to RCA side. Important: • When - Onkyo M-5000R | Owner Manual - Page 19
PR-SC5508 Power Amplifier M-5000R Power Amplifier M-5000R Right Speaker Left Speaker This is an example of the bridge connection with the AV controller PR-SC5508. Note • When using the XLR inputs, do not connect anything to the RCA inputs. It may damage the power amplifier. • Make sure - Onkyo M-5000R | Owner Manual - Page 20
On & Basic Operations Basic Operations Turning On the Power Amplifier Turning Off the Power Amplifier Standby LED ON/STANDBY POWER 1 Set POWER to the ON position (?) on the front panel. 2 Press ON/STANDBY to turn on the power amplifier. The power amplifier comes on, the display lights, and the - Onkyo M-5000R | Owner Manual - Page 21
models), OFF (North American models) Once the ASb function has been activated, the power amplifier will not automatically turn on even if it receives the signal. To turn on the power amplifier, press ON/STANDBY manually. You can also disable the function by setting this switch to OFF side. Note - Onkyo M-5000R | Owner Manual - Page 22
switch is switched to the RCA side. • Check the connection in case of bi-amping connection. Audio performance • Audio performance will be at its best about 10 to 30 minutes after the power amplifier has been turned on and had time to warm up. • Using cable ties to bundle audio cables with speaker or - Onkyo M-5000R | Owner Manual - Page 23
Specifications M-5000R Amplifier Section Rated Output Power North American: (Stereo) (BTL mono) European: (Stereo) (BTL mono) 80 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.05% (FTC) 100 watts - Onkyo M-5000R | Owner Manual - Page 24
Unit 1 & 12, 9/F, Ever Gain Plaza Tower 1, 88, Container Port Road, Kwai Chung, N.T., Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 SN 29400545A (C) Copyright
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
Power Amplifier
M-5000R
Instruction Manual
E
n