Onkyo P-3000R Owner Manual

Onkyo P-3000R Manual

Get Onkyo P-3000R PDF manuals and user guides View all Onkyo P-3000R manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo P-3000R manual content summary:

  • Onkyo P-3000R | Owner Manual - Page 1
    Instruction Manual Preamplifier P-3000R En
  • Onkyo P-3000R | Owner Manual - Page 2
    servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions in performance this indicates a need for service. 16. Object and Liquid Entry Never push
  • Onkyo P-3000R | Owner Manual - Page 3
    liquid gets inside this unit, have it checked by your Onkyo dealer. 8. Handling Notes • If you need to transport this unit the equipment. NOTE: This equipment has been tested and found to comply with the limits for and used in accordance with the instructions, may cause harmful interference to
  • Onkyo P-3000R | Owner Manual - Page 4
    on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in accordance with the declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding
  • Onkyo P-3000R | Owner Manual - Page 5
    Converter (Up to 192 kHz) • Separate TI (Burr-Brown) 192 kHz/32-Bit DACs (PCM1795) for L/R Channels • Direct Mode • Tone Control (Bass/Treble) • Independent Headphone Amplifier • Discrete Phono Equalizer • Phono Input (MM) • USB Digital Input for 192 kHz/32-Bit HD Audio from PC* • AES/EBU Balanced
  • Onkyo P-3000R | Owner Manual - Page 6
    the USB port on the rear panel of the P-3000R, you can connect your PC and play back 192 kHz/32-bit HD audio formats*. * Playback of PC audio requires dedicated software that can be downloaded from an Onkyo website. PLL (Phase Locked Loop) Ultra-Low Jitter Technology Jitter is an unwanted side
  • Onkyo P-3000R | Owner Manual - Page 7
    Block Diagram DIDRC (Dynamic Intermodulation Distortion Reduction Circuitry) En 7
  • Onkyo P-3000R | Owner Manual - Page 8
    are the same regardless of color. En 8 Thank you for purchasing an Onkyo Preamplifier. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new
  • Onkyo P-3000R | Owner Manual - Page 9
    Cord 16 Connecting a Compact Disc Player 17 Connecting the Onkyo Dock 18 Connecting a Turntable 19 Connecting a Cassette Tape Deck 19 Connecting a Recording Component 19 Connecting a Power Amplifier 20 Turning On & Basic Operations Basic Operations...25 Turning On/Off the Preamplifier 25
  • Onkyo P-3000R | Owner Manual - Page 10
    the battery compartment. 3 Replace the cover and slide it shut. 30° off center (Left/Right) Approx. 16 ft. (5 m) Note • The remote controller may not work reliably if the preamplifier is subjected to bright light, such as direct sunlight or invertertype fluorescent lights. Keep this in mind when
  • Onkyo P-3000R | Owner Manual - Page 11
    preamplifier to On or Standby. C Standby LED (➔ 25) Lights when the preamplifier 28) Lights when the preamplifier is in Direct mode. preamplifier is completely shutdown. It must be set to the ON position (?) to set the preamplifier "FS x4". Note • The USB input does not support FS x4 (➔ 31). N DIGITAL
  • Onkyo P-3000R | Owner Manual - Page 12
    nothing is detected. C fs indicator (➔ 28) Lights when sampling rate is displayed. D Message area Displays various information. E MUTING indicator (➔ 27) Flashes while the preamplifier is muted. F Headphone indicator (➔ 29) Lights when a pair of headphones are plugged into the PHONES jack. En 12
  • Onkyo P-3000R | Owner Manual - Page 13
    and outputs are for connecting a cassette tape deck. G PRE OUT 1/2 L/R jacks These outputs are for connecting a power amplifier. H V REMOTE CONTROL jack This V (Remote Interactive) jack can be connected to an V jack on an Onkyo Dock. The preamplifier's remote controller can then be used to control
  • Onkyo P-3000R | Owner Manual - Page 14
    USB) (➔ 26) Selects an input source. E /// and ENTER buttons Used to select and adjust settings. F VOLUME R/X button (➔ 26) Adjusts the volume of the preamplifier. the preamplifier. You can also use the remote controller to control your Onkyo compact disc player (such as C-7000R) and Onkyo Dock.
  • Onkyo P-3000R | Owner Manual - Page 15
    rate for PCM input is 192 kHz/24 bit, 2ch. USB digital connections allow you to enjoy digital sound. The preamplifier supports high-speed USB 2.0. Use Type A-B USB cable. The maximum USB sampling rate for PCM input is 192 kHz/32 bit, 2ch. OPTICAL Optical digital connections allow you to enjoy
  • Onkyo P-3000R | Owner Manual - Page 16
    cord from the wall outlet first, and then the preamplifier. • Turning on the preamplifier may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the preamplifier into a different branch circuit. • Do not use a power cord
  • Onkyo P-3000R | Owner Manual - Page 17
    Connecting a Compact Disc Player Analog Connection Preamplifier P-3000R L R Compact Disc Player C-7000R Digital (Optical or Coaxial) Connection Preamplifier P-3000R Compact Disc Player C-7000R Connect either of them. En 17
  • Onkyo P-3000R | Owner Manual - Page 18
    Digital AES/EBU Connection Preamplifier P-3000R Connecting the Onkyo Dock Preamplifier P-3000R Compact Disc Player Use only V cables for V connections. V cables are supplied with Onkyo Docks. • Connect only Onkyo Dock to V jacks. Connecting other manufacturer's components may cause a malfunction
  • Onkyo P-3000R | Owner Manual - Page 19
    Connecting a Cassette Tape Deck Preamplifier P-3000R L R L R AUDIO OUTPUT Turntable (MM) without a built-in phono preamp Remove the short pins plugged into the jacks before connecting a turntable to the PHONO inputs. Tip • If your turntable (MM) has a phono built-in preamp, you can connect to other
  • Onkyo P-3000R | Owner Manual - Page 20
    Connecting a Power Amplifier Stereo Connection Preamplifier P-3000R Power Amplifier M-5000R Right speaker This is an example of the stereo connection using the power amplifier M-5000R. En 20 Left speaker
  • Onkyo P-3000R | Owner Manual - Page 21
    Bi-amping Connection Preamplifier P-3000R Power Amplifier M-5000R Tweeter (high) Woofer (low) Power Amplifier M-5000R Right speaker Left speaker This is an example of the bi-amping connection using the power amplifier M-5000R. Important: • When making the bi-amping connections, be sure to
  • Onkyo P-3000R | Owner Manual - Page 22
    ) Preamplifier P-3000R Power Amplifier M-5000R Connect either of them. ■ Connecting an AV Receiver If you connect analog audio to an AV receiver, the output will be stereo. Digital optical input L R Analog audio input AV receiver Right speaker Left speaker This is an example of the stereo
  • Onkyo P-3000R | Owner Manual - Page 23
    Using Stereo Speakers as the Front Speakers for Your Surround Sound System Preamplifier P-3000R L L R R Power Amplifier M-5000R Note • To adjust " (➔ 35). ■ Surround sound system Digital optical input FRONT L/R PRE OUT Not used AV receiver Front right speaker Front left speaker This is
  • Onkyo P-3000R | Owner Manual - Page 24
    the Powered Subwoofers ■ 2.1 channel system (2 speakers and 1 subwoofer) Preamplifier P-3000R Power Amplifier M-5000R ■ 2.2 channel system (2 speakers and 2 subwoofers) Preamplifier P-3000R Power Amplifier M-5000R Right speaker Left speaker LINE INPUT R L Powered subwoofer This connection
  • Onkyo P-3000R | Owner Manual - Page 25
    's components and internal temperature are stabilized, and the sound will soften. • The previous input source will appear on the display when the preamplifier turned on. Note • The preamplifier remembers the state when power was previously turned off, and returns to the state. Turning Off the
  • Onkyo P-3000R | Owner Manual - Page 26
    "PHONO". * You can select USB input only when the USB connector is connected. Note • When the USB connector is not connected, you cannot select USB even if you press USB on the remote controller. The message "NO USB" appears. DIGITAL This setting makes the preamplifier not to display the digital
  • Onkyo P-3000R | Owner Manual - Page 27
    MUTING ` BALANCE The left and right output balance can be adjusted. 1 Press MUTING to mute the out of the preamplifier. The MUTING indicator flashes on the display. To unmute the preamplifier, press MUTING again. MUTING indicator To cancel the setup at any point, press SETUP. You can also use
  • Onkyo P-3000R | Owner Manual - Page 28
    on the front panel or remote controller when the display brightness is set to OFF. En 28 DIMMER You can adjust the brightness of the preamplifier's display. 1 Press DIMMER repeatedly to change the brightness of the display in sequence. Normal→Dim → Off Normal Dim Off The Display Off LED lights
  • Onkyo P-3000R | Owner Manual - Page 29
    dial 1 Connect a pair of stereo headphones with a standard plug (1/4 by using VOLUME R/X. While headphones are connected, the PRE OUT output no sound. Note • Always turn down the SETUP of the remote controller can be also operated with the preamplifier. 1 Press MODE repeatedly to select the item. 2
  • Onkyo P-3000R | Owner Manual - Page 30
    Compact Disc Player Playback CD  Playback mode buttons The Onkyo compact disc player connected to the preamplifier is played from its remote controller. Note • Make sure the remote controller is pointed at the compact disc player when using it. • Depending on the
  • Onkyo P-3000R | Owner Manual - Page 31
    the audio data stored on your PC by using the preamplifier via USB port connection, you must install the driver on your PC from the Onkyo website. For the installation procedure, see the Onkyo Web site. Playing Music Files on the PC USB USB PC This section explains how to play music files on
  • Onkyo P-3000R | Owner Manual - Page 32
    from the Apple web site. For supported iPod models, see the instruction manual of the Onkyo Dock. ■ System Function Auto Power On When you start playback on an Onkyo Dock while the preamplifier is on Standby, the preamplifier will automatically turn on and select an Onkyo Dock as the input source
  • Onkyo P-3000R | Owner Manual - Page 33
    see "Changing the Display information" (➔ 28). • Digital input signals are put through and output on this preamplifier as is. • The USB input does not support FS x4 (➔ 31). Setting the Bi-amp Level ,  ENTER SETUP Offset the volume level based on master volume. 1 Press SETUP. 2 Press / to select
  • Onkyo P-3000R | Owner Manual - Page 34
    (➔ 29). Tip Usage example of RECOUT: • Perform recording by connecting the turntable to P-3000R (PHONO IN jack), and the cassette tape deck to LINE 3 (IN/OUT jack) of P-3000R. Note • The preamplifier will cancel the setup if there is no operation for 8 seconds. • When connecting a component
  • Onkyo P-3000R | Owner Manual - Page 35
    turn on even if it receives the signal. To turn on the preamplifier, press ON/STANDBY manually. Note • When the set ASb starts running, the power of the Onkyo Dock connected via RI is automatically turned off (➔ 32). • The preamplifier will cancel the setup if there is no operation for 8 seconds
  • Onkyo P-3000R | Owner Manual - Page 36
    are connected correctly (➔ 15). • Check all connections and correct as necessary (➔ 15). • While headphones are connected, the PRE OUT output no sound (➔ 29). • The preamplifier does not support digital formats other than PCM. Inputting a digital format other than PCM will cause loud noise. • If the
  • Onkyo P-3000R | Owner Manual - Page 37
    turning the power on: 1. Source component 2. Preamplifier (P-3000R) 3. Power Amplifier (M-5000R*) When turning the power off: 1. Power Amplifier (M-5000R*) 2. Preamplifier (P-3000R) 3. Source component * When using 12V TRIGGER OUT as M-5000R is combined with P-3000R, the popping noise is reduced by
  • Onkyo P-3000R | Owner Manual - Page 38
    3000R Stereo Inputs Balance Inputs ■ Audio Outputs Digital Outputs Analog Stereo Outputs Pre inches) 11.0 kg (24.3 lbs.) Optical: 2 Coaxial: 2 2ch PCM Digital Input Sampling Rate: 32 kHz/44.1 kHz/48 kHz/88 RI 1 PC Interface USB ■ System Requirements USB OS CPU RAM HDD Supported models 1 Windows®
  • Onkyo P-3000R | Owner Manual - Page 39
    Memo En 39
  • Onkyo P-3000R | Owner Manual - Page 40
    Unit 1 & 12, 9/F, Ever Gain Plaza Tower 1, 88, Container Port Road, Kwai Chung, N.T., Hong Kong. Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 SN 29400534A (C) Copyright
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Preamplifier
P-3000R
Instruction Manual
E
n