Onkyo PR-SC5508 Owner Manual

Onkyo PR-SC5508 Manual

Get Onkyo PR-SC5508 PDF manuals and user guides View all Onkyo PR-SC5508 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo PR-SC5508 manual content summary:

  • Onkyo PR-SC5508 | Owner Manual - Page 1
    AV Controller PR-SC5508 Contents Introduction 2 Connections 13 Turning On & Basic Operations ......25 Instruction Manual Advanced Operations 43 Controlling iPod & Other Components 81 Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making
  • Onkyo PR-SC5508 | Owner Manual - Page 2
    . Refer all servicing to qualified service personnel. Ser- instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work consider the environmental issues and follow local
  • Onkyo PR-SC5508 | Owner Manual - Page 3
    not user-serviceable. If you cannot turn on the unit, contact your Onkyo dealer. Hearing Loss Caution Excessive sound pressure from earphones and for a long time, it may not work properly the next time you turn it on : This equipment has been tested and found to comply with with the instructions, may
  • Onkyo PR-SC5508 | Owner Manual - Page 4
    should be performed only by qualified service personnel. IMPORTANT The wires in the ONKYO product described in this instruction manual Specifications and operations are the same regardless of color. Using the Remote Controller Installing the Batteries Note • If the remote controller doesn't work
  • Onkyo PR-SC5508 | Owner Manual - Page 5
    Macros 93 Others Troubleshooting 94 Specifications 100 About HDMI 101 Using an RIHD-compatible TV, Player, or Recorder ... 102 Firmware Update 104 Updating the Firmware via Network 104 Updating the Firmware via USB 105 Video Resolution Chart 107 To reset the AV controller to its factory
  • Onkyo PR-SC5508 | Owner Manual - Page 6
    Balanced XLR 9.2-channel preouts, with front bi-amp- ing capability • 8 HDMI*8 Inputs (1 on front panel) and 2 Outputs • Onkyo Q for System Control • 7 Digital Inputs (4 Optical/3 Coaxial) • Component Video Switching (3 Inputs/1 Output) • Universal Port for the Optional Dock for iPod*9/HD Radio™*10
  • Onkyo PR-SC5508 | Owner Manual - Page 7
    of Sirius XM Radio Inc. and its subsidiaries. All rights reserved. Service not available in Alaska and Hawaii. *12 Rhapsody and the Rhapsody logo are registered trademarks of RealNetworks, Inc. *13 VLSC™ is a trademark of Onkyo Corporation. THX Ultra2 Plus Before any home theater component can be
  • Onkyo PR-SC5508 | Owner Manual - Page 8
    25) C STANDBY indicator (➔ 25) D ZONE 2 indicator (➔ 77) E ZONE 3 indicator (➔ 77) F Remote control sensor/transmitter (➔ 4) G Display (➔ 9) H MASTER VOLUME control and indicator (➔ 26) I PURE AUDIO button (➔ 36) J HDMI THRU indicator (➔ 61) K Input selector buttons (BD/DVD, VCR/DVR, CBL/SAT, GAME
  • Onkyo PR-SC5508 | Owner Manual - Page 9
    ) Q LISTENING MODE buttons (MOVIE/TV, MUSIC, GAME and THX) (➔ 36) Z AUX INPUT jacks (HDMI, VIDEO, AUDIO L/R and DIGITAL) (➔ 19, 20) [ Up S and Down F buttons (➔ 62, 78 indicators C Listening mode and format indicators (➔ 36, 63) D NETWORK indicator (➔ 66, 67, 71) E Tuning indicators RDS indicator (
  • Onkyo PR-SC5508 | Owner Manual - Page 10
    OPTICAL jacks E USB port F ETHERNET port G V REMOTE CONTROL jack H RS232 terminal Terminal for control. I HDMI IN and HDMI output (HDMI OUT MAIN and HDMI OUT SUB) jacks J MONITOR OUT V and S jacks K COMPONENT VIDEO IN and MONITOR OUT jacks L COMPONENT VIDEO ZONE 2 OUT jacks M ZONE 2 OUT V jack N PC
  • Onkyo PR-SC5508 | Owner Manual - Page 11
    Controller Controlling the AV Controller B C D E *1 *2 F B G H I C J K*3 L*3 D *4 M N*3 To control the AV controller, press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo mode.) *4 VIDEO functions as a short cut of Video section of Home menu (➔ 27). En 11
  • Onkyo PR-SC5508 | Owner Manual - Page 12
    to the AV controller's superb capabilities, you can enjoy surround sound with a real sense of movement in your own home-just like being in a movie theater or concert hall. With Blu-ray Discs or DVDs, you can enjoy DTS and Dolby Digital. With analog or digital TV, you can enjoy Dolby Pro Logic IIx
  • Onkyo PR-SC5508 | Owner Manual - Page 13
    See your multichannel power amplifier's instruction manual for more information on connecting speakers. AV controller FRONT HIGH/ FRONT WIDE INPUT SELECT OUTPUT OUTPUT INPUT SELECT OUTPUT INPUT SELECT INPUT SELECT INPUT SELECT INPUT SELECT OUTPUT OUTPUT OUTPUT OUTPUT FUSE SPEAKER
  • Onkyo PR-SC5508 | Owner Manual - Page 14
    AV controller's balanced PRE OUT jacks are wired as shown. See your multichannel power amplifier's instruction manual for more information on connecting speakers. AV controller *1 Specify crossover frequency for the channel that you want to output in "Speaker Configuration" (➔ 48). *2 If you use the
  • Onkyo PR-SC5508 | Owner Manual - Page 15
    . Dipole speakers output the same sound in two directions output. If you use one subwoofer, connect it to SW1 PRE OUT. Powered subwoofer LINE INPUT LINE INPUT LINE INPUT LINE INPUT You can also connect a powered subwoofer to the AV controller's balanced SUBWOOFER 1 PRE OUT, SUBWOOFER 2 PRE
  • Onkyo PR-SC5508 | Owner Manual - Page 16
    low) terminals. • Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual. See your multichannel power amplifier's instruction manual for more information on connecting speakers. AV controller SURROUND BACK RIGHT SURROUND RIGHT FRONT RIGHT CENTER FRONT LEFT
  • Onkyo PR-SC5508 | Owner Manual - Page 17
    Audio Source You can connect a balanced audio source to the AV controller's BALANCE L/R INPUT jacks by using two XLR audio cables the "Input Channel" setting to "Mono(L)" (➔ 47). The AV controller's balanced INPUT jacks are wired as shown. 2 1 3 Stereo audio source with balanced XLR output En 17
  • Onkyo PR-SC5508 | Owner Manual - Page 18
    AV components HDMI cable : Video & Audio AV controller Other cables : Video AV controller : Audio TV, projector, etc. Blu-ray Disc/ DVD player Game console TV, projector, etc. Blu-ray Disc/ DVD player Game console • Before making any AV connections, read the manuals supplied with your AV
  • Onkyo PR-SC5508 | Owner Manual - Page 19
    your Blu-ray Disc/DVD player's HDMI audio output setting to PCM. - To listen to TV audio through the AV controller, see "Connecting Your Components" (➔ 20). Note • When listening to an HDMI component through the AV controller, set the HDMI component so that its video can be seen on the TV screen
  • Onkyo PR-SC5508 | Owner Manual - Page 20
    OUT TV, projector, etc. $ DIGITAL COAXIAL IN 1 (BD/DVD) Digital audio IN 2 (VCR/DVR) Blu-ray Disc/DVD player ✔ VCR or DVD recorder/digital ✔ video recorder IN 3 (CBL/SAT) Satellite, cable, set-top box, etc. ✔ OPTICAL IN 1 (GAME) Game console ✔ IN 2 (TV/CD) TV, CD player ✔ IN 3 Other
  • Onkyo PR-SC5508 | Owner Manual - Page 21
    components may not support all V functions. Refer to the manuals supplied with your other Onkyo components. • While Zone 2 or Zone 3 is on, the Auto Power On and Direct Change V functions do not work. • Do not use V connections if you use HDMI Control (RIHD) (➔ 61). IN L REMOTE CONTROL R TV/CD IN
  • Onkyo PR-SC5508 | Owner Manual - Page 22
    . • Keep the AM loop antenna as far away as possible from your AV controller, TV, speaker cables, and power cords. Tip • If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead. • If you cannot achieve good reception with the
  • Onkyo PR-SC5508 | Owner Manual - Page 23
    as they are. ` Both: Video signals are output from both HDMI outputs AV controller at the resolution supported by both TVs. You cannot select "Resolution" setting. `Both(Main): Video signals are output from both HDMI MONITOR OUT Composite S-Video Component HDMI outputs but HDMI OUT MAIN will
  • Onkyo PR-SC5508 | Owner Manual - Page 24
    video output. The composite video, S-Video and component video outputs pass through their respective analog input signals as they are. HDMI input signals are not output. Video Signal Flow Chart Blu-ray Disc/DVD player, etc. Composite S-Video PC IN Component HDMI (Analog RGB) IN AV controller
  • Onkyo PR-SC5508 | Owner Manual - Page 25
    STANDBY indicator STANDBY ON RECEIVER POWER Turning On 1 (European and Asian models) Set POWER to the ON position ( ) on the front panel. The AV controller enters Standby mode, and the STANDBY indicator comes on. 2 Press ON/STANDBY on the front panel. or Press RECEIVER followed by ON on the
  • Onkyo PR-SC5508 | Owner Manual - Page 26
    This manual describes the procedure using the remote controller available information. Tip • Alternatively, you can use the AV controller's DISPLAY. The following information can typically be displayed. Input source Listening mode*1 Signal format*2 Sampling frequency Input signal resolution Output
  • Onkyo PR-SC5508 | Owner Manual - Page 27
    is English only.) BD/DVD Audio Video Info Input Listening Mode 2 Use R/X/F/S output the sound. *3 When you have entered a custom name in "Name Edit" (➔ 55), the input source is displayed with that name. But even if not, the component name may be displayed if the AV controller receives it via HDMI
  • Onkyo PR-SC5508 | Owner Manual - Page 28
    When you connect an V-capable Onkyo component, you must configure the input display so that V can work properly. This setting can be assigned to CBL/SAT of REMOTE MODE turns on. 3. The AV controller turns on. 4. The input selector of the AV controller is set to CBL/SAT. MY MUSIC: 1. The playback
  • Onkyo PR-SC5508 | Owner Manual - Page 29
    ALL OFF. The playback component assigned to the lastpressed ACTIVITIES, the AV controller, and the TV turn off.*2 *2 When the last-pressed capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Enabling
  • Onkyo PR-SC5508 | Owner Manual - Page 30
    The microphone picks up test tones which played through each speaker as Audyssey MultEQ® XT32 Room Correction and Speaker Setup run. • Audyssey MultEQ XT32 Room Correction and Speaker Setup cannot be performed while a pair of headphones is connected. 1 Turn on the AV controller and the connected TV
  • Onkyo PR-SC5508 | Owner Manual - Page 31
    Room Correction and Speaker Setup. • If the AV controller is muted, it will be unmuted automatically sound distorts, detection issues may occur, so use an appropriate volume level. If the subwoofer has a low-pass filter switch, set it to Off or Direct. Refer to your subwoofer's instruction manual
  • Onkyo PR-SC5508 | Owner Manual - Page 32
    the buttons repeatedly to change the frequency one step at a time. In manual tuning mode, FM stations will be in mono. Tuning into weak FM and FM stations directly by entering the appropriate frequency. 1 On the remote controller, press TUNER repeatedly to select "AM" or "FM", followed by D.TUN
  • Onkyo PR-SC5508 | Owner Manual - Page 33
    and is available in most European countries. Many FM stations use it these days. In addition to displaying text information, RDS can also help you find radio stations by type (e.g., news, sport, rock, etc.). The AV controller supports four types of RDS information: ■ PS (Program Service) When tuned
  • Onkyo PR-SC5508 | Owner Manual - Page 34
    shown later in this chapter. 3 To start the search, press ENTER. The AV controller searches until it finds a station of the type you specified, at which point music National music Oldies music Folk music Documentary Alarm test Alarm Display None News Affairs Info Sport Educate Drama Culture
  • Onkyo PR-SC5508 | Owner Manual - Page 35
    through the AV controller, connect the TV/VCR's audio and video outputs directly to the recording VCR's audio and video inputs. See the manuals supplied with your TV and VCR for details. • Video signals connected to composite video inputs can be recorded only via composite video outputs. If your
  • Onkyo PR-SC5508 | Owner Manual - Page 36
    the AV controller's display and video circuitry are turned off. Only video signals input through HDMI input can be output from an HDMI output(s). used while you are listening to sound through your TV speakers coming from components connected to the AV controller ("TV Sp On" appears on the front
  • Onkyo PR-SC5508 | Owner Manual - Page 37
    About Listening Modes The AV controller's listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. Explanatory Notes JK LM BC D G LISTENING MODE EF HI ■ Input Source The following audio formats are supported by the
  • Onkyo PR-SC5508 | Owner Manual - Page 38
    high-fidelity audio reproduction. (As 4 the video circuitry is turned off, only video signals input through HDMI % input can be output from an HDMI output(s). ' Direct In this mode, audio from the input source is output without surround-sound ( D i r e c t d i oPPoPP processing. The speaker
  • Onkyo PR-SC5508 | Owner Manual - Page 39
    channels provide better spatial imaging and 360degree sound localization, perfect for sounds that pan across the surround channels. Use i c DSX PL bGame DSX blend between the front and surround channels. The combination of Dolby Pro Logic II/IIx and Audyssey DSX modes can 4 be used. % ' N e o :
  • Onkyo PR-SC5508 | Owner Manual - Page 40
    matrixed and multichannel sources. Sur- THX Game s round back speaker output depends on the source material and the selected listening mode. • ambient and directional sounds to produce the for use with video games. It can THX Ltd. The combination of Dolby Pro Logic IIz Height*3 and THX Ultra2
  • Onkyo PR-SC5508 | Owner Manual - Page 41
    including video games. Neural Surround can also be used N R L T H X M u s i c by broadcasters to encode and transmit surround-sound content surround mode specifically designed to enhance the playback of compressed digital music content. It provides listeners with an expanded sound stage and clean
  • Onkyo PR-SC5508 | Owner Manual - Page 42
    and front wide speakers are not supported. *6 For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system. *7 AV controller can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better sound according to the player. In that
  • Onkyo PR-SC5508 | Owner Manual - Page 43
    Controller Setup J 9. Lock Setup B Input/Output Assign G Miscellaneous (➔ 44) (➔ 59) 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video HDMI 5. Auto Power Down 6. Network 7. Firmware Update I Remote Controller Setup also be performed on the AV controller by using SETUP, arrow
  • Onkyo PR-SC5508 | Owner Manual - Page 44
    connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs at the resolution supported by both TVs. ` Both(Main): Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs but HDMI OUT MAIN will
  • Onkyo PR-SC5508 | Owner Manual - Page 45
    You can specify the output resolution for the HDMI output and COMPONENT VIDEO MONITOR OUT and have the AV controller upconvert the picture resolution as necessary to match the resolution supported by your TV. ` Through*1: Select this to pass video through the AV controller at the same resolution
  • Onkyo PR-SC5508 | Owner Manual - Page 46
    Formats" for more information on video signal flow and upconversion (➔ 23). • If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV controller selects the video source based on the setting of "Component Video Input". • When an HDMI IN is assigned to an input
  • Onkyo PR-SC5508 | Owner Manual - Page 47
    64). Subwoofer Input Sensitivity ` 0dB to 15dB in 5 dB step. Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal. With this setting, you can change the AV controller's subwoofer sensitivity to match your DVD player. Note • This setting only affects
  • Onkyo PR-SC5508 | Owner Manual - Page 48
    60) and an input selector other than HDMI is selected. Speaker Settings If you change Note • When bi-amping is used, the AV controller is able to drive up to 7.2 speakers Sounds below the crossover frequency will be output by the subwoofer instead of the speaker. Refer to your speaker's manuals
  • Onkyo PR-SC5508 | Owner Manual - Page 49
    (➔ 48). • The speakers cannot be calibrated while the AV controller is muted. • The test tone is output at the standard level for THX, which is 0 dB this setting cannot be selected (➔ 48). Tip • If you're using a handheld sound level meter, adjust the level of each speaker so that it reads 75 dB SPL
  • Onkyo PR-SC5508 | Owner Manual - Page 50
    ` Manual: You can adjust the equalizer for each speaker manually. If you selected "Manual", continue affect bass sounds; high frequencies (e.g., 16000Hz) affect treble sounds. 3 Use Select this to turn on BGC. Note • This setting is only available if "THX Ultra2/Select2 Subwoofer" is set to "Yes". ■
  • Onkyo PR-SC5508 | Owner Manual - Page 51
    , these settings apply to Dolby Pro Logic II, not Dolby Pro Logic IIx. Panorama ` On: sound is output by only the center speaker. (If you're not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting controls
  • Onkyo PR-SC5508 | Owner Manual - Page 52
    Control in Dolby Pro is used. ` Manual: You can select any available listening mode. Note controlling the volume level difference without unnatural changes in volume or sound output is attenuated in order to create the center channel. Setting a value "0" in the middle is set to hear a sound. Sound
  • Onkyo PR-SC5508 | Owner Manual - Page 53
    output. ` On: Analog audio signals (bass signals) are output. This setting determines whether or not analog audio signals (bass signals) are output Direct will be available for selection. sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deterio- rating sound
  • Onkyo PR-SC5508 | Owner Manual - Page 54
    output sound levels in the room, a prerequisite for delivering a loudness correction solution. Audyssey Dynamic EQ works in tandem with Audyssey MultEQ XT32 to provide well-balanced sound for every listener at any volume level. About Audyssey Dynamic Volume Audyssey Dynamic Volume solves the problem
  • Onkyo PR-SC5508 | Owner Manual - Page 55
    scanning function, you may find that the picture and sound are out of sync. With the A/V Sync . If HDMI Lip Sync is enabled (➔ 60) and your TV or display supports HDMI Lip Sync be performed on the remote controller by using +10. *2 Press CLR on the remote controller, you can delete all characters
  • Onkyo PR-SC5508 | Owner Manual - Page 56
    to obtain optimal picture quality from the receiver. Accordingly, Onkyo recommends that setup and calibration be performed by an ISF . If the AV controller detects the type of content incorrectly due to characteristics of the disc, you can select "Video" or "Film" manually. ■ Edge Enhancement
  • Onkyo PR-SC5508 | Owner Manual - Page 57
    ", this setting will be changed to "1080i". You can specify the output resolution for the HDMI outputs and have the AV controller upconvert the picture resolution as necessary to match the resolution supported by your TV. Available only when "Source" has been selected in the "Resolution" of the
  • Onkyo PR-SC5508 | Owner Manual - Page 58
    Depending on the input and output resolutions, "Smart Zoom" may the AV controller has been (input via HDMI). ■ DTS/ available. Note • If you connect an input component (such as UP-A1 series Dock that seated iPod) to the UNIVERSAL PORT jack, you can assign only listening modes for the analog sound
  • Onkyo PR-SC5508 | Owner Manual - Page 59
    whether operation details are displayed on-screen when an AV controller function is adjusted. ` On: Displayed. ` Off: Not displayed. Even when "On" is selected, operation details may not be output if the input source is connected to an HDMI IN. ■ TV Format (European and Asian models) For the
  • Onkyo PR-SC5508 | Owner Manual - Page 60
    lip sync disabled. ` Enable: HDMI lip sync enabled. The AV controller can be set to automatically correct any delay between the video and the audio, based on the data from the connected monitor. Note • This function works only if your HDMI-compatible TV supports HDMI Lip Sync. • You can check the
  • Onkyo PR-SC5508 | Owner Manual - Page 61
    that support it and may not work properly with some components due to their settings or compatibility. • When set to "On", power consumption will increase. • When set to "On", regardless of whether the AV controller is On or in Standby, both audio and video stream from an HDMI input will be output
  • Onkyo PR-SC5508 | Owner Manual - Page 62
    the AV controller's firmware. Do not shutdown the power of the AV controller while update. ■ Universal Port ` via NET: You can update the firmware via Internet. Check the network connection before update. ` via USB: You can update the firmware from a USB mass storage device. You can update the Onkyo
  • Onkyo PR-SC5508 | Owner Manual - Page 63
    AV controller is muted. • Speakers that are set to "No" or "None" in the "Speaker Configuration" (➔ 48) cannot be adjusted. • This function will not work Centered Dialog on. Note • The "Screen Ctr Dialog" can be used when supported listening mode is selected and "Center" and "Front High" are set to
  • Onkyo PR-SC5508 | Owner Manual - Page 64
    again allows you to return to the "Audio Selector" setting. Normally, the AV controller detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually set the signal format to PCM or DTS. • If the beginnings of
  • Onkyo PR-SC5508 | Owner Manual - Page 65
    Consult your ISP if you have any problems with your Internet connection. • The AV controller uses DHCP to configure its network settings automatically. If you want to configure these settings manually, see "Network Settings" (➔ 71). • The AV controller does not support PPPoE settings, so if you have
  • Onkyo PR-SC5508 | Owner Manual - Page 66
    , Internet radio may not work satisfactorily. For best results, Network Settings" (➔ 71). DISPLAY Note • When the NETWORK indicator flashes, confirm that the Ethernet cable is firmly connected to the AV controller. • Services available may vary depending on the region. See the separate instructions
  • Onkyo PR-SC5508 | Owner Manual - Page 67
    music by Artist, Album, or Track. Note • The search function does not work with media servers which do not support this function. • Depending on the sharing settings in the media server, the AV controller may not able to access the content. Refer to the instruction manual of the media server. En 67
  • Onkyo PR-SC5508 | Owner Manual - Page 68
    Fast Forward/Fast Reverse/ Pause operations do not work. Random Playback The Random function can only be random playback, press RANDOM again. Random playback supports up to 20000 songs per folder. If a case, check your server, network, and AV controller connections. Windows Media Player 11 Setup This
  • Onkyo PR-SC5508 | Owner Manual - Page 69
    server playback, the AV controller supports the following music file formats: MP3, WMA, WAV, FLAC, Ogg Vorbis, AAC and LPCM. Not all servers support all formats. ■ -rates (VBR) are supported. (Playing times may display incorrectly with VBR.) • WMA Pro/Voice formats are not supported. • WMA files must
  • Onkyo PR-SC5508 | Owner Manual - Page 70
    develop a concept of wired and wireless interoperable networks where digital content such as photos, music, and videos can be shared through consumer electronics, personal computers, and mobile devices in and beyond the home. The AV controller certificate the DLNA Interoperability Guidelines version
  • Onkyo PR-SC5508 | Owner Manual - Page 71
    is necessary to execute "Save". This section explains how to configure the AV controller's network settings manually. If your router's DHCP server is enabled, you don't need to change any of these settings, as the AV controller is set use DHCP to configure itself automatically by default (i.e., DHCP
  • Onkyo PR-SC5508 | Owner Manual - Page 72
    HDMI 5. Auto Power Down 6. Network 7. Firmware Update 3 Use R/X to select "Network", and then press ENTER. The "Network" screen appears. 7-6. Network performed on the AV controller by using SETUP, arrows, and ENTER. ■ MAC Address This is the AV controller's MAC (Media Access Control) address. This
  • Onkyo PR-SC5508 | Owner Manual - Page 73
    , and folders may be nested up to 16 levels deep. • USB hubs and USB devices with hub functions are not supported. 1 Plug your USB mass storage device into the AV controller's USB port. 2 Press NET/USB repeatedly to select the "USB(Front)" or "USB(Rear)" screen. USB(Front) USB Storage 1 / 1 The
  • Onkyo PR-SC5508 | Owner Manual - Page 74
    your USB MP3 player's instruction manual for details. • Protected WMA music files on an MP3 player cannot be played. • Onkyo accepts no responsibility whatsoever for the loss or dam- age to data stored on a USB mass storage device when that device is used with the AV controller. We recommend that
  • Onkyo PR-SC5508 | Owner Manual - Page 75
    audio cable to connect the AV controller's PRE OUT ZONE 2 SUBWOOFER jack to the line input on a powered subwoofer in Zone 2. • Connect your Zone 2 speakers to the speaker terminals on your Zone 2 amp. Zone 2 Video Output The AV controller features a composite video output for connection to a TV in
  • Onkyo PR-SC5508 | Owner Manual - Page 76
    Hookup • Use an RCA audio cable to connect the AV controller's PRE OUT ZONE 3 L/R jacks to an analog audio input on your Zone 3 amp. Hardware Setup 1. Remote ID 2. Multi Zone 3. Tuner 4. HDMI 5. Auto Power Down 6. Network 7. Firmware Update 3 Use R/X to select "Multi Zone", and then press
  • Onkyo PR-SC5508 | Owner Manual - Page 77
    signal as COMPONENT VIDEO MONITOR OUT is output from ZONE 2 OUT (component). Using Zone 2/3 This section explains how to turn Zone 2/3 on and off, how to select an input source for Zone 2/3, and how to adjust the volume for Zone 2/3. Controlling Zone 2/3 from the AV controller ZONE 3 indicator ZONE
  • Onkyo PR-SC5508 | Owner Manual - Page 78
    Zone 2/3 is on, V functions will not work. On the remote controller, press ZONE repeatedly, and then press MUTING. To unmute a zone, on the remote controller, press ZONE, and then press MUTING again. Adjusting the Tone and Balance of Zones 1 On the AV controller, press ZONE 2 or ZONE 3. 2 Press the
  • Onkyo PR-SC5508 | Owner Manual - Page 79
    or any combination of rooms. When triggered, the output from a 12V TRIGGER OUT goes high (+12 volts and 150 milliamperes max. at TRIGGER OUT A; +12 volts and 25 milliamperes max. at TRIGGER OUT B and C). Hookup • Use a miniplug cable to connect the AV controller's 12V TRIGGER OUT A, B, or C jack to
  • Onkyo PR-SC5508 | Owner Manual - Page 80
    Using the Remote Controller in Zone 2/3 and Multiroom Control Kits To control the AV controller with the remote controller while you're in Zone 2 or Zone 3, you'll need a commercially available multiroom remote control kit for each zone. • Multiroom kits are made by Niles and Xantech. These kits can
  • Onkyo PR-SC5508 | Owner Manual - Page 81
    which can be plugged into the AV controller's USB port. Note • Note that the rear-panel USB port does not support iPod/iPhone connection. USB port Playing Remote Control (NET/USB). Note • The audio of video content can be played back but no video will be displayed onscreen. Extended Mode control
  • Onkyo PR-SC5508 | Owner Manual - Page 82
    as the input source. • See the UP-A1 Dock's instruction manual for more information. • See the ND-S1's instruction manual for more 83 information. *1 The ND-S1's audio outputs are digital outputs. If the digital audio input on your AV controller cannot be assigned to an input selector whose Input
  • Onkyo PR-SC5508 | Owner Manual - Page 83
    , available from the Apple web site. For supported iPod models, see the instruction manual of the Onkyo Dock. UP-A1 Dock With the UP-A1 Dock, you can easily play the music, photo, or movie stored on your Apple iPod through the AV controller and enjoy great sound. You can use the AV controller
  • Onkyo PR-SC5508 | Owner Manual - Page 84
    iPod as the input source. System Off When you turn off the AV controller, the ND-S1, RI Dock and iPod turn off automatically. Note • Linked operations do not work with video playback or when the alarm is set to play a sound. • If you use your iPod with any other accessories, iPod playback detection
  • Onkyo PR-SC5508 | Owner Manual - Page 85
    L RETURN ✔*5 ✔ ✔ E F • With some iPod models, generations and RI Docks, certain buttons may not work as expected. • For detailed operation of the iPod, please refer to the instruction manual of RI Dock. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on or off. Your iPod may not
  • Onkyo PR-SC5508 | Owner Manual - Page 86
    . select "Search DB", and then press ENTER to access the database on the network. The AV controller accesses and searches the database. After searching, a list of the brand name 8. Remote Controller Setup appears. 1. Remote Mode Setup 2. Activities Setup 8-1. Remote Mode Setup TV Category TV
  • Onkyo PR-SC5508 | Owner Manual - Page 87
    number (via network) 8 Use R/X to select "Search by model number (via network)", and then the remote controller at the AV controller's remote control sensor, press ENTER. Remote control sensor ( Enter.) 2. Choose "Works" or "Doesn't work". 13 *1 *2 Works Doesn't work (Retry) *1 When
  • Onkyo PR-SC5508 | Owner Manual - Page 88
    of printing, but are subject to change. Remote Control Codes for Onkyo Components Connected via V Onkyo components that are connected via V are controlled by pointing the remote controller at the AV controller, not the component. This allows you to control components that are out of view, in a rack
  • Onkyo PR-SC5508 | Owner Manual - Page 89
    a TV TV is preprogrammed with the remote control code for controlling a TV that supports the Q*1 (limited to some models). The TV must be able to receive remote control commands via Q and be connected to the AV controller via HDMI. If controlling your TV via Q doesn't work very well, program your TV
  • Onkyo PR-SC5508 | Owner Manual - Page 90
    DISC +/- ✔ ✔ M PREV CH MENU ✔ ✔ ✔✔ G N RETURN O CLR *1 The Q function is not supported. The Q sup- H ported by the AV controller is the CEC system control function of the HDMI standard. *2 These buttons function as colored buttons or A, B, C, D but- tons. *3  (Pause) functions
  • Onkyo PR-SC5508 | Owner Manual - Page 91
    option enables the source component to turn on when ACTIVITIES is pressed. ■ Receiver Power On ` Enable: The AV controller will turn on. ` Disable: The AV controller will not turn on. This option enables the AV controller to turn on when ACTIVITIES is pressed. ■ Receiver Source Change ` Enable: The
  • Onkyo PR-SC5508 | Owner Manual - Page 92
    controller, point it at the AV controller's remote control sensor, as shown below. Remote control remote control code (➔ 88) but some buttons don't work as expected and MODE. 3 Point the remote controllers at each other, within about 4 (10 cm) Supplied remote controller 4 To learn more commands
  • Onkyo PR-SC5508 | Owner Manual - Page 93
    macro will no longer work. If you retrieve it, you will have to taught again. Running Macros Press MY MOVIE, MY TV, or MY MUSIC. The commands in the macro are transmitted in the order in which they were programmed. Keep the remote controller pointed at the AV controller until all of the commands
  • Onkyo PR-SC5508 | Owner Manual - Page 94
    Troubleshooting If you have any trouble using the AV controller, look for a solution in this section. If you can't resolve the issue yourself, contact your Onkyo dealer. If you can't resolve the issue yourself, try resetting the AV controller before contacting your Onkyo dealer. To reset the AV
  • Onkyo PR-SC5508 | Owner Manual - Page 95
    sound with a certain signal format Check the digital audio output setting on the con- - nected device. On some game consoles, such as those that support DVD, the default setting is off. With some DVD-Video 't work Check AV controller does not switch formats immediately, you may not hear any sound
  • Onkyo PR-SC5508 | Owner Manual - Page 96
    to anything other than "Through", no video is output by the HDMI outputs. When the "Resolution" is set to any resolution not 45 supported by the TV, no video is output by the HDMI outputs. If the message "Resolution Error" appears on the - AV controller's display, this indicates that your TV does
  • Onkyo PR-SC5508 | Owner Manual - Page 97
    because no video signals are output. Select another listening mode. Zone 2/3 ■ There's no sound Only components connected to analog inputs can be - played in Zone 2/3. Music Server and Internet Radio ■ Can't access the server or Internet radio Check the network connection between the AV con
  • Onkyo PR-SC5508 | Owner Manual - Page 98
    input, and the picture isn't very clear, you can attenuate the gain. Video ATT:OFF: (default). Video ATT:ON: Gain reduced by 2dB. The AV controller contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or
  • Onkyo PR-SC5508 | Owner Manual - Page 99
    VCR/DVR and RETURN on the AV controller at the same time. Select "Skip" in the "VideoProcessor" setting on the display. To reset back to the original setting, press the same button at the same time. If you select "Use", the AV controller will output video signals from the video processor. En 99
  • Onkyo PR-SC5508 | Owner Manual - Page 100
    .9 lbs.) ■ HDMI Input Output Video Resolution Audio Format Supported ■ Video Inputs IN 1, IN Pre Outputs 9 Subwoofer Pre Outputs 2 Phones 1 (6.3 ø) ■ Others SETUP MIC RS232 Ethernet IR Input IR Output 12 V Trigger Out USB Universal Port RI 1 1 1 2 1 3 2 (Front and Rear) 1 1 Specifications
  • Onkyo PR-SC5508 | Owner Manual - Page 101
    must also support HDMI output of the above audio formats. About Copyright Protection The AV controller supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV controller via HDMI must also support HDCP. *1 DVI
  • Onkyo PR-SC5508 | Owner Manual - Page 102
    so that the linked operations work properly. -Blu-ray Disc/DVD player is up to three. -Blu-ray Disc recorder/DVD recorder/Digital Video Recorder is up to three. -Cable/Satellite Set-top box is up to four. • Do not connect the AV controller to the other AV controller/AV amplifier via HDMI. • When the
  • Onkyo PR-SC5508 | Owner Manual - Page 103
    of the TV is turned on automatically, and input with the AV controller connected is selected. 5. Following the operating instructions of the TV, select "Use the TV speakers" from the menu screen of the TV, and confirm that the audio is output from the speakers of the TV, and not from the speakers
  • Onkyo PR-SC5508 | Owner Manual - Page 104
    has been advised of the possibility of such damages. See the Onkyo web site for latest information. Updating the Firmware via Network The AV controller allows you to update firmware using network connection on rear panel. * In this procedure, on-screen display may vary depending on the model. Note
  • Onkyo PR-SC5508 | Owner Manual - Page 105
    of the router is set properly. See the instruction manual of the router. • If your network allows only one client connection and there is any other device already connected, the AV controller cannot access the network. Consult your Internet Service Provider (ISP). • If your modem does not function
  • Onkyo PR-SC5508 | Owner Manual - Page 106
    . 14 Press ON/STANDBY to turn on the AV controller. Congratulations!! Now you have the latest firmware on your Onkyo AV controller. Troubleshooting Case1: If "No Update" is displayed on the front display of the AV controller, the firmware has already been updated. You do not need to do anything
  • Onkyo PR-SC5508 | Owner Manual - Page 107
    Resolution Chart The following tables show how video signals at different resolutions are output by the AV controller. NTSC/PAL ✔: Output Output HDMI Input HDMI Component S-Video Composite PC IN (Analog RGB) 1080p/24 1080p 1080i 720p 1080p/24 ✔ 1080p ✔ 1080i ✔ 720p ✔ 480p/576p ✔ 480i
  • Onkyo PR-SC5508 | Owner Manual - Page 108
    Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-229-1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
AV Controller
PR-SC5508
Instruction Manual
Thank you for purchasing an Onkyo AV Controller.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Controller.
Please retain this manual for future reference.
Contents
Introduction
...................................
2
Connections
.................................
13
Turning On & Basic Operations
......
25
Advanced Operations
.................
43
Controlling iPod & Other
Components
............................
81
Others
...........................................
94
E
n