Onkyo PR-SC5509 Owner Manual

Onkyo PR-SC5509 Manual

Get Onkyo PR-SC5509 PDF manuals and user guides View all Onkyo PR-SC5509 manuals
Add to My Manuals
Save this manual to your list of manuals

Onkyo PR-SC5509 manual content summary:

  • Onkyo PR-SC5509 | Owner Manual - Page 1
    AV Controller PR-SC5509 Contents Introduction 2 Connections 12 Turning On & Basic Operations ......25 Instruction Manual Advanced Operations 48 Controlling Other Components...77 Thank you for purchasing an Onkyo AV Controller. Please read this manual thoroughly before making connections and
  • Onkyo PR-SC5509 | Owner Manual - Page 2
    outlet, consult an electrician for replacement of the obsolete outlet. 10. 14. Refer all servicing to qualified service personnel. Servicing is required when the instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls
  • Onkyo PR-SC5509 | Owner Manual - Page 3
    Hearing Loss Caution Excessive sound pressure from earphones and unit, have it checked by your Onkyo dealer. 8. Handling Notes • If : This equipment has been tested and found to comply with with the instructions, may cause B EST CONFORME À LA NORME NMB003 DU CANADA. Sur les modèles dont la fiche est
  • Onkyo PR-SC5509 | Owner Manual - Page 4
    Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service the ONKYO product described in this instruction manual is in batteries Note • If the remote controller doesn't work reliably, try replacing the batteries. • Don't mix new
  • Onkyo PR-SC5509 | Owner Manual - Page 5
    84 Using Normal Macros 85 Appendix Troubleshooting 86 Firmware Update 92 Connection Tips and Video Signal Path 95 Using an RIHD-compatible TV, Player, or Recorder 98 About HDMI 100 Network/USB Features 101 Specifications 104 To reset the AV controller to its factory defaults, turn it on and
  • Onkyo PR-SC5509 | Owner Manual - Page 6
    channel preouts, with front bi- amping capability • 8 HDMI*9 Inputs (1 on front panel) and 2 Outputs • Onkyo Q for System Control Services available may vary depending on the region. • 2 Independent Subwoofer Pre Outs • Zone 2 and 3 Preouts • Network correct room acoustic problems • Audyssey Dynamic
  • Onkyo PR-SC5509 | Owner Manual - Page 7
    a rigorous series of quality and performance tests. Only then can a product feature , and pre-amplifier performance Onkyo UP-HT1 HD Radio tuner module (sold separately). *12 "DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network
  • Onkyo PR-SC5509 | Owner Manual - Page 8
    Front & Rear Panels Front Panel B C D EF G (North American models) J K H I L MN O PQR S T U (European and Asian models) [ VWX Y Z " En 8
  • Onkyo PR-SC5509 | Owner Manual - Page 9
    button (25) C Remote control sensor and transmitter (4) D Display (9) E MASTER VOLUME control and indicator (26, 74) F HDMI THRU indicator (67) G in parentheses. N O PQ B Speaker/channel indicators I Audio input indicators C Z2 (Zone 2) indicator (74) J Bi AMP indicator (16, 52) D Z3 (Zone
  • Onkyo PR-SC5509 | Owner Manual - Page 10
    G V REMOTE CONTROL jack H RS232 port Terminal for control. I HDMI IN and HDMI output (HDMI OUT MAIN and HDMI OUT SUB) jacks PRE/LINE OUT jacks X PRE OUT jacks (FRONT L/R, CENTER, SURROUND L/R, SURR BACK L/R, FRONT HIGH/WIDE L/R, SUBWOOFER 1 and SUBWOOFER 2) See "Connecting the AV Controller
  • Onkyo PR-SC5509 | Owner Manual - Page 11
    , press RECEIVER to select Receiver mode. You can also use the remote controller to control Onkyo Blu-ray Disc/DVD player, CD player, and other components. See "Entering Remote Control Codes" for more details (➔ page 81). For detailed information, see the pages in parentheses. B RECEIVER button
  • Onkyo PR-SC5509 | Owner Manual - Page 12
    Controller Connecting Your Speakers The AV controller is designed to be used with a separate multichannel power amplifier. You connect the AV controller's PRE multichannel power amplifier's instruction manual for more information on connecting speakers. AV controller Multichannel power amplifier
  • Onkyo PR-SC5509 | Owner Manual - Page 13
    XLR jacks by using several XLR audio cables. The AV controller's balanced PRE OUT jacks are wired as shown. See your multichannel power amplifier's instruction manual for more information on connecting speakers. AV controller Multichannel power amplifier Front Surround Surround Front right Center
  • Onkyo PR-SC5509 | Owner Manual - Page 14
    are recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings automatically (➔ page 34) or manually (➔ page 52). Number of speakers Front speakers Center speaker Surround speakers Surround back speaker*1 Surround
  • Onkyo PR-SC5509 | Owner Manual - Page 15
    XLR cables. The level and distance can be set individually for each output. If you're using only one subwoofer, connect it to SUBWOOFER 1 PRE OUT. INPUT Balanced XLR cable INPUT INPUT Powered subwoofers Balanced XLR cable To find the best position for your subwoofers while playing a movie or
  • Onkyo PR-SC5509 | Owner Manual - Page 16
    the speakers' tweeter (high) and woofer (low) terminals. • Bi-amping can be used only with speakers that support bi-amping. Refer to your speaker manual. Bi-amping provides improved bass and treble performance. When bi-amping is used, the AV controller is able to drive up to a 7.2 speaker system in
  • Onkyo PR-SC5509 | Owner Manual - Page 17
    ■ Connection via XLR Jacks AV controller Multichannel power amplifier Tweeter (high) Woofer (low) Front right Front left En 17
  • Onkyo PR-SC5509 | Owner Manual - Page 18
    HDMI cable : Video & Audio AV controller Other cables : Video AV controller : Audio TV, projector, etc. Blu-ray Disc/ DVD player Game console TV, projector, etc. Blu-ray Disc/ DVD player Game console • Before making any AV connections, read the manuals digital sound such 7.1-channel analog
  • Onkyo PR-SC5509 | Owner Manual - Page 19
    Note • The AV controller does not support SCART plugs. • The AV controller's optical digital jacks "About HDMI" (➔ page 100) ■ Audio Return Channel (ARC) function Audio Return Channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT MAIN of the AV controller. •
  • Onkyo PR-SC5509 | Owner Manual - Page 20
    TV Out" setting is set to "On" (➔ page 67) to hear from your TV speakers, the sound will also be output from the AV controller's speakers if you adjust the volume of the AV controller. Similarly, as the "HDMI Control(RIHD)" setting is set to "On" (➔ page 67) to hear from the speakers of an
  • Onkyo PR-SC5509 | Owner Manual - Page 21
    Your Components The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV controller's display when changing settings. Front "# $ Rear %& ' ( ) * + , - Connect your components to the appropriate jacks. The
  • Onkyo PR-SC5509 | Owner Manual - Page 22
    coil (MC) type cartridge, you'll need a commercially available MC head amp or MC transformer to connect to PHONO IN. See your turntable's manual for details. If your turntable has a ground wire, connect it to the AV controller's GND screw. With some turntables, connecting the ground wire may produce
  • Onkyo PR-SC5509 | Owner Manual - Page 23
    controller. The other jack is for connecting additional V-capable components. • Connect only Onkyo components to V jacks. Connecting other manufacturer's components may cause a malfunction. • Some components may not support all V functions. Refer to the manuals • The surround sound and DSP listening
  • Onkyo PR-SC5509 | Owner Manual - Page 24
    . Insert the plug fully into the jack. Push. Insert wire. Release. Caution • Be careful not to injure yourself when using thumbtacks. Thumbtacks is a problem, plug the AV controller into a different branch circuit. • Do not use a power cord other than the one supplied with the AV controller. The
  • Onkyo PR-SC5509 | Owner Manual - Page 25
    1 Press ON/STANDBY on the front panel. or Press RECEIVER followed by RECEIVER on the remote controller. The AV controller will enter standby mode. To prevent any loud surprises when you turn on the AV controller, always turn down the volume before you turn it off. (European and Asian models) To
  • Onkyo PR-SC5509 | Owner Manual - Page 26
    HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV controller's display when changing settings. This section describes the procedure for using the remote controller unless otherwise specified. Controlling Contents of USB or Network Devices See "Controlling media or service. C
  • Onkyo PR-SC5509 | Owner Manual - Page 27
    service. on the front of the AV controller. While reading the contents of will flash if the AV controller cannot read the iPod/iPhone controller stores the mode. This means that if you disconnect when in Extended Mode (Music), the AV controller front of the AV controller, while the message "Connecting..."
  • Onkyo PR-SC5509 | Owner Manual - Page 28
    following formats are supported: PLS, M3U, and podcast (RSS). However, depending on the type of data or audio format used by the Internet radio station, you may not be able to listen to some stations. Note • Services available may vary depending on the region. See the separate instructions for more
  • Onkyo PR-SC5509 | Owner Manual - Page 29
    Press TOP MENU to go to the top menu of the Internet Radio services. Tip • By pressing SEARCH, you can toggle between the playback screen and to the AV controller, so if you find that you can't connect to the AV controller, recheck the AV controller's IP address on the "Network" screen. 2 Click
  • Onkyo PR-SC5509 | Owner Manual - Page 30
    with media servers which do not support this function. • Photos and movies stored on a media server cannot be accessed from the AV controller. • Depending on the sharing settings in the media server, the AV controller may not able to access the content. See the instruction manual of the media server
  • Onkyo PR-SC5509 | Owner Manual - Page 31
    it flashes, verify the network connection. 3 Use the AV controller from the Manual tuning mode In manual tuning mode, FM stations will be in mono. 1 Press TUNING MODE so that the AUTO indicator goes off on the display. 2 Press and hold TUNING R/X. The frequency stops changing when you release
  • Onkyo PR-SC5509 | Owner Manual - Page 32
    to store the station or channel. The station or channel is stored and the preset controller, or the remote controller's CH +/-. Tip • You can also use the remote controller's number buttons to select a preset directly. The AV controller supports four types of RDS information: PS (Program Service
  • Onkyo PR-SC5509 | Owner Manual - Page 33
    in this chapter. 3 To start the search, press the enter button. The AV controller searches until it finds a station of the type you specified, at which point Country music National music Oldies music Folk music Documentary Alarm test Alarm Display None News Affairs Info Sport Educate Drama Culture
  • Onkyo PR-SC5509 | Owner Manual - Page 34
    problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound . • The microphone picks up test tones played through each speaker as HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV controller's display when changing settings.
  • Onkyo PR-SC5509 | Owner Manual - Page 35
    Test tones are played through the subwoofer. Use the volume control sound will be output. An error will occur if you set "Subwoofer" to "2ch" without connecting any subwoofers, or with only one subwoofer connected. Note • If your subwoofer does not have a volume control -- Review Speaker
  • Onkyo PR-SC5509 | Owner Manual - Page 36
    • If the AV controller is muted, it or 3 attempts, contact your Onkyo dealer. • Speaker Detect Error sound distorts, detection issues may occur, so use an appropriate volume level. If the subwoofer has a low-pass filter switch, set it to Off or Direct. Refer to your subwoofer's instruction manual
  • Onkyo PR-SC5509 | Owner Manual - Page 37
    Digital and DTS listening modes can only be selected if your Blu-ray Disc/DVD player is connected to the AV controller with a digital audio connection (coaxial, optical, or HDMI). • The listening modes you can select depends on the format of the input signal. To check the format, see "Displaying
  • Onkyo PR-SC5509 | Owner Manual - Page 38
    Source The following audio formats are supported by the listening mode. " 4 % ' ( ) This is mono (monophonic) sound. This is stereo (stereophonic) sound. Two independent audio signal channels are reproduced through two speakers. This is 5.1-channel surround sound. This surround system has five
  • Onkyo PR-SC5509 | Owner Manual - Page 39
    the same regardless of where you are within the listening room. With this mode you can enjoy a virtual surround sound even with only two or three speakers. This works by controlling how sounds reach the listener's left and right ears. Good results may not be possible if there's too much reverb, so
  • Onkyo PR-SC5509 | Owner Manual - Page 40
    Source Dolby Pro Logic IIx*3 Dolby Pro Logic II PL Mo v i e Dolby Pro Logic IIx expands any 2-channel source for 7.1-channel playback. It provides a very natural and seamless surround-sound experience that fully envelops the listener. As well as music and movies, video games can also benefit from
  • Onkyo PR-SC5509 | Owner Manual - Page 41
    those with a DTS-ES Matrix soundtrack. DTS Neo:X*8 This mode expands various sources and various inputs up to 9.1 channel. DTS Neo:X provides semi-spherical sound field adding height/wide speakers to create a natural, immersive and spacious surround soundscape. N e o : X6 C i n e m a Ne o : X Mu
  • Onkyo PR-SC5509 | Owner Manual - Page 42
    optimize the tonal and spatial characteristics of the soundtrack for reproduction in the home-theater environment. They can be used with 2-channel matrixed and multichannel sources. Surround back speaker output depends on the source material and the selected listening mode. • THX Cinema % THX
  • Onkyo PR-SC5509 | Owner Manual - Page 43
    is used. *4 For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system. *5 AV controller can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better sound according to the player. In that case, set the output setting on the
  • Onkyo PR-SC5509 | Owner Manual - Page 44
    a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV controller's display when changing settings. 1 Press mode, not all channels shown here output the sound. Using the Sleep Timer With the sleep timer, you can set the AV controller to turn off
  • Onkyo PR-SC5509 | Owner Manual - Page 45
    , you can use the AV controller's DIMMER. Changing the Input Display When you connect an V-capable Onkyo component, you must configure the • The Whole House Mode only supports analog audio. • Cancelling the Whole House Mode will switch Multi Zone off. • The sound from Zone 2/3 may interrupt when
  • Onkyo PR-SC5509 | Owner Manual - Page 46
    the headphones plug is inserted in the PHONES jack,  indicator, speaker/channel indicator FL and FR lights. Note • Always turn down the volume AV controller, no sound will be output from the headphones jack. By using ACTIVITIES in Easy macro mode, you can sequentially operate Onkyo components via
  • Onkyo PR-SC5509 | Owner Manual - Page 47
    press and hold down ALL OFF until ALL OFF lights (about 3 seconds). 2 Release HOME and ALL OFF, and press ALL OFF again. ALL OFF flashes twice. record. You can watch the source while recording. The AV controller's MASTER VOLUME control has no effect on recording. 2 On your recorder, start recording
  • Onkyo PR-SC5509 | Owner Manual - Page 48
    Setup 1. Remote ID 2. Multi Zone 3. Tuner 4. HDMI 5. Auto Standby 6. Network 7. Firmware Update I Remote Controller Setup (➔ page 80) 3. Audio Adjust 1. Multiplex/Mono 2. Dolby 3. DTS 4. Audyssey DSX 5. Theater-Dimensional 6. LFE Level 7. Direct 8. Sound Program Edit E Source Setup (➔ page 59
  • Onkyo PR-SC5509 | Owner Manual - Page 49
    : `Analog, HDMI Main, HDMI Sub, Both, Both(Main) or Both(Sub) ■ Resolution ` Through*1: Select this to pass video through the AV controller at the same resolution and with no conversion. ` Auto*2: Select this to have the AV controller automatically convert video at resolutions supported by your TV
  • Onkyo PR-SC5509 | Owner Manual - Page 50
    AUX" is used only for input from the front panel. • Do not assign an HDMI IN to the TV/CD selector while "HDMI Control(RIHD)" is set to "On" (➔ page 67), otherwise appropriate CEC (Consumer Electronics Control) operation will not be guaranteed. • If you assign to an input selector that is currently
  • Onkyo PR-SC5509 | Owner Manual - Page 51
    has been connected Output composite video and S-Video sources from the HDMI output. Note • For composite video and S-Video upconversion for the multichannel input, set to If you connect a component to the AV controller's analog multichannel input, you must assign that input to an input selector
  • Onkyo PR-SC5509 | Owner Manual - Page 52
    ■ Input Channel ` Mono amping the Front Speakers" (➔ page 16). Note • When bi-amping is used, the AV controller Amp". Here you can check the settings made by Audyssey MultEQ XT32 Room Correction and Speaker Setup function, or set them manually HDMI Control(RIHD)" is set to "On"
  • Onkyo PR-SC5509 | Owner Manual - Page 53
    Speaker Setup, please make sure manually that any THX speakers are set "Yes", this setting cannot be selected. *5 If "Bi-Amp" is selected, this setting cannot be selected. *6 This setting boost bass output by feeding bass sounds from the front left, right, and center channels to the subwoofer. Note •
  • Onkyo PR-SC5509 | Owner Manual - Page 54
    the AV controller is muted. • Speakers that you set to "No" or "None" in the "Speaker Configuration" cannot be selected (➔ page 53). • The test tone is setting cannot be selected (➔ page 53). Tip • If you're using a handheld sound level meter, adjust the level of each speaker so that it reads 75 dB
  • Onkyo PR-SC5509 | Owner Manual - Page 55
    Manual: You can adjust the equalizer for each speaker manually. Continue with the following procedure: 1 Press X to select "Channel sounds; high frequencies (e.g., 16000Hz) affect treble sounds. 3 Use R to select "Channel Loudness Plus is a new volume control technology featured in THX Ultra2 Plus™
  • Onkyo PR-SC5509 | Owner Manual - Page 56
    speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting controls the front left the Dolby EX or THX Surround EX listening mode is used. ` Manual: You can select any available listening mode. This setting determines how Dolby
  • Onkyo PR-SC5509 | Owner Manual - Page 57
    provides comfortable listening, effectively controlling the volume level difference without unnatural changes in volume or sound quality to recreate the 2 to 5 The DTS Neo:X Music listening mode creates 9-channel surround sound from 2-channel stereo sources. With this setting, you can specify by how
  • Onkyo PR-SC5509 | Owner Manual - Page 58
    on different sources, you can pre-register the settings that best suit each content in "Sound Program". The registered settings can then subwoofer with the sound program. ■ Music Optimizer*2 `Off, On See "Music Optimizer" (➔ page 71). ■ Equalizer*2 ` Off ` Manual: The manual setting in "Equalizer
  • Onkyo PR-SC5509 | Owner Manual - Page 59
    you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is calibrated by Audyssey MultEQ XT32 will play at reference level when the master volume control is set to the 0 dB position. At that level you can hear
  • Onkyo PR-SC5509 | Owner Manual - Page 60
    Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is between television channels or changing from stereo to surround sound content. IntelliVolume you can adjust will depend on whether your TV or display supports HDMI Lip Sync and if the "Lip Sync" setting is set
  • Onkyo PR-SC5509 | Owner Manual - Page 61
    performed by using +10 on the remote controller. *2 Press CLR on the remote controller to delete all the characters you have ■ Picture Mode*1 ` Custom: All settings can be performed manually. `ISF Day: Setting when a room is bright. ` HDMI output(s) is processed in the same way as "Through". En 61
  • Onkyo PR-SC5509 | Owner Manual - Page 62
    standards to obtain optimal picture quality from the controller. Accordingly, Onkyo recommends that setup and calibration be performed by output resolution for the HDMI Output(s) and have the AV controller upconvert the picture resolution as necessary to match the resolution supported by your TV.
  • Onkyo PR-SC5509 | Owner Manual - Page 63
    pages 49, 62), this setting is fixed to "Off". *5 Press CLR if you want to reset to the default value. *6 If you are using the analog RGB input, this setting is not your TV tuner can be sent to the HDMI OUT MAIN of the AV controller.*1 With this selection, the TV's audio can be automatically selected
  • Onkyo PR-SC5509 | Owner Manual - Page 64
    "Audio Return Channel" setting (➔ no sound. When "HDMI", " controller detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can manually will be reset to " controller, or - the docked iPod/iPhone model is not supported
  • Onkyo PR-SC5509 | Owner Manual - Page 65
    the listening mode used when 2-channel (2/0) stereo digital sources, such as DTS-HD Master Audio sources, such as Blu-ray or HD DVD (input via HDMI). ■ Power On Volume `Last, Min, 1 to 99 or Max (Absolute details are displayed on-screen when an AV controller function is adjusted. Even when "On" is
  • Onkyo PR-SC5509 | Owner Manual - Page 66
    When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV controller from the the amp in that zone. ` Variable: The Zone 2/3 volume can be set on the AV controller. If you've connected your Zone 2/3 speakers to an amp with no volume control,
  • Onkyo PR-SC5509 | Owner Manual - Page 67
    "Off". • Refer to the connected component's instruction manual for details. • When "HDMI Control(RIHD)" setting is set to "On", the controller's volume control will make the sound be output from the AV controller's front left and right speakers. To stop the AV controller's speakers producing sound
  • Onkyo PR-SC5509 | Owner Manual - Page 68
    works only if your HDMI-compatible TV supports HDMI Lip Sync. • If the "Monitor Out" setting is set to "HDMI Main", "Both( HDMI Control(RIHD)", "HDMI Through", or "Audio Return Channel", turn off the power on all connected pieces of equipment and then turn them on again. Refer to the user's manuals
  • Onkyo PR-SC5509 | Owner Manual - Page 69
    the power of the AV controller while updating. ■ Universal Port ` via NET: Performs the firmware update via Internet. Check the network connection before updating. ` via USB: Performs the firmware update from a USB device. These settings allow you to update Onkyo dock's firmware. Do not shutdown the
  • Onkyo PR-SC5509 | Owner Manual - Page 70
    cases: - the "Audio TV Out" setting is set to "On" (➔ page 67). - "HDMI Control(RIHD)" is set to "On" (➔ page 67) and you're listening through your TV speakers. Sound Program ■ Sound Program `Stereo Source 1, Stereo Source 2, Stereo Source 3, Multich Source 1, Multich Source 2, Multich Source
  • Onkyo PR-SC5509 | Owner Manual - Page 71
    on the material that you are playing and the intention of the original sound designer, and with some material there will be little or no effect when Dolby TrueHD. • The Late Night function is set to "Off" when the AV controller is set to standby. For Dolby TrueHD sources, it will be set to "Auto".
  • Onkyo PR-SC5509 | Owner Manual - Page 72
    THX listening mode however, the setting will return to "On" when the AV controller is turned off. • These settings cannot be used while a pair of headphones Note • The "Screen Centered Dialog" can be used when supported listening mode is selected. • This setting cannot be used while a pair of
  • Onkyo PR-SC5509 | Owner Manual - Page 73
    2.1-channel playback in Zone 2/3. Zone 2 Video Output The AV controller features composite video and component video outputs for connection to a TV in Zone 2, so that you can enjoy both audio and video in that zone. Main room TV Main room AV controller Multichannel power amp AV controller or
  • Onkyo PR-SC5509 | Owner Manual - Page 74
    Press ZONE 2 or ZONE 3 (the Z2/Z3 indicator on the display flash). 2 Use MASTER VOLUME control within 8 seconds to adjust the volume. Tip • The Zone 2/3 volume, tone, and balance functions have no effect on ZONE 2/3 PRE/LINE OUT when the "Zone 2 Out" or "Zone 3 Out" setting is set to "Fixed" (➔ page
  • Onkyo PR-SC5509 | Owner Manual - Page 75
    analog input sources are output by the ZONE 2/3 PRE/LINE OUT terminals. Digital input sources are not output. If no sound is heard when an input source is selected, verify it to Direct. • Even if you repeatedly press the remote controller's ZONE to select zones, the last zone selection will be
  • Onkyo PR-SC5509 | Owner Manual - Page 76
    zone. • Multiroom kits are made by Niles and Xantech. These kits can also be used when there isn't a clear line of sight to the AV controller's remote sensor, such as when it's installed inside a cabinet. Using a Multiroom Kit with Zone In this setup, the IR receiver in Zone picks up the
  • Onkyo PR-SC5509 | Owner Manual - Page 77
    . For supported iPod/iPhone models, see the instruction manual of the Onkyo Dock. UP-A1 Dock With the UP-A1 Dock, you can easily play the music, photos, or movies stored on your Apple iPod/iPhone through the AV controller and enjoy great sound. You can use the AV controller's remote controller to
  • Onkyo PR-SC5509 | Owner Manual - Page 78
    iPod/iPhone through the AV controller and enjoy great sound, and watch iPod/iPhone slideshows Control Codes" for details on entering a remote control code (➔ page 81). See the Dock's instruction manual for more information. UP-A1 Dock PORT is preprogrammed with the remote control code for controlling
  • Onkyo PR-SC5509 | Owner Manual - Page 79
    operation of iPod/iPhone, please refer to the instruction manual of the RI Dock. *1 This button does not turn the Onkyo DS-A2 or DS-A2X RI Dock on iPhone is already off, it will remain off when the remote controller transmits the Off command. *2 TOP MENU works as the mode to the HDMI OUT MAIN. En 79
  • Onkyo PR-SC5509 | Owner Manual - Page 80
    control code to control these components. For details on controlling these components, see the indicated pages. BD/DVD Onkyo Blu-ray Disc player (➔ page 82) TV/CD Onkyo CD player (➔ page 82) PORT Onkyo to access the database on the network. The AV controller accesses and searches the database. After
  • Onkyo PR-SC5509 | Owner Manual - Page 81
    order of the candidate code and the total number of codes for the brand. 13 If you can control component, press RECEIVER, use R/X to select "Works", and then press ENTER. If you cannot control component, press RECEIVER, use R/X to select "Doesn't work (Retry)" and press ENTER. The next code appears
  • Onkyo PR-SC5509 | Owner Manual - Page 82
    a TV TV is preprogrammed with the remote control code for controlling a TV that supports the Q*1 (limited to some models). The TV must be able to receive remote control commands via Q and be connected to the AV controller via HDMI. If controlling your TV via Q doesn't work very well, program
  • Onkyo PR-SC5509 | Owner Manual - Page 83
    Cassette tape deck J B Buttons B SOURCE*1 ✔ C , INPUT, ✔ TV VOL R/X D GUIDE ✔ K TOP MENU ✔ ✔✔ L E R/X/F/S, ENTER ✔✔ ✔✔ ✔ C F SETUP ✔✔ G 2 Q function is not supported. The Q supported by the AV controller is the CEC system control function of the HDMI standard. *3  (
  • Onkyo PR-SC5509 | Owner Manual - Page 84
    , and Pause are preprogrammed with commands for controlling Onkyo CD players, cassette decks, and DVD players. However, they can learn new commands, and you can restore the preprogrammed commands at any time by resetting the remote controller (➔ page 82). • To overwrite a previously acquire command
  • Onkyo PR-SC5509 | Owner Manual - Page 85
    MY MOVIE, MY TV, or MY MUSIC. The commands in the macro are transmitted in the order in which they were programmed. Keep the remote controller pointed at the AV controller until all of the commands have been transmitted. Macros can be run at any time, regardless of the current remote
  • Onkyo PR-SC5509 | Owner Manual - Page 86
    Appendix Troubleshooting If you have any trouble using the AV controller, look for a solution in this section. If you can't resolve the issue yourself, contact your Onkyo dealer. If you can't resolve the issue yourself, try resetting the AV controller before contacting your Onkyo dealer. To reset
  • Onkyo PR-SC5509 | Owner Manual - Page 87
    channel, the subwoofer produces no sound. Make sure the speakers are configured correctly. 53 ■ There's no sound with a certain signal format Check the digital audio output setting on the - connected device. On some game consoles, such as those that support , the AV controller remains in DTS
  • Onkyo PR-SC5509 | Owner Manual - Page 88
    When the resolution is set to any resolution not 49 supported by the TV, no video is output from the HDMI outputs. If the message "Resolution Error" appears on the - AV controller's display, this indicates that your TV does not support the current video resolution and En you need to select
  • Onkyo PR-SC5509 | Owner Manual - Page 89
    controller. To control an Onkyo component that's connected 81 via V, point the remote controller at the AV controller. Be sure to enter the appropriate remote control code first. To control an Onkyo sound controller. 103 Make sure your iPod/iPhone is properly inserted in - Check the "Network
  • Onkyo PR-SC5509 | Owner Manual - Page 90
    Network Control" is set to "Enable" in the "Network" setting. - "HDMI Control(RIHD)" setting is set to "On". (Depending on the TV status, the AV controller will enter standby mode as usual.) - The "HDMI Through" setting is set to other than "Off". ■ The sound , release both buttons. To reactivate
  • Onkyo PR-SC5509 | Owner Manual - Page 91
    release the buttons. The AV controller contains a microcomputer for signal processing and control functions controller to standby. Important Note Regarding Video Playback The AV controller can upconvert component video, SVideo, and composite video sources for display on a TV connected to the HDMI
  • Onkyo PR-SC5509 | Owner Manual - Page 92
    minutes to complete the firmware update. • The AV controller will retain all your settings after the update is finished. Before you start • Set the "HDMI Control(RIHD)" setting to "Off" (➔ page 67). • Turn off the controller device connected via RS232C and via Ethernet network. • Turn off Zone 2 and
  • Onkyo PR-SC5509 | Owner Manual - Page 93
    an Internet connection, please contact Onkyo Support (➔ page 94). Updating the Firmware via USB The AV controller allows you to update the firmware using a USB device. Note • Never unplug or turn off the AV controller during the update process. • Never plug or unplug an HDMI cable or a USB device
  • Onkyo PR-SC5509 | Owner Manual - Page 94
    turn on again. Congratulations! You now have the latest firmware installed on your Onkyo AV controller. Troubleshooting Case 1: If "No Update" is displayed on the front display of the AV controller, it means that the firmware has already been updated. You do not need to do anything further. Case
  • Onkyo PR-SC5509 | Owner Manual - Page 95
    you choose will depend on the formats supported by your components. Use the following sections as a guide. The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN. If your TV is connected to other video outputs, use the AV controller's display when changing settings. Video
  • Onkyo PR-SC5509 | Owner Manual - Page 96
    Blu-ray Disc/DVD player, etc. Analog Multichannel Optical Coaxial HDMI *1 AV controller *3 Analog IN *1*3 *1 *1 OUT HDMI *1 *2 TV, projector, etc. *1 Depends on the "Audio TV Out" setting (➔ page 67). *2 This is possible when "Audio Return Channel" is set to "Auto" (➔ page 68), the TV/CD
  • Onkyo PR-SC5509 | Owner Manual - Page 97
    signals at different resolutions are output by the AV controller. NTSC/PAL ✔: Output Input Output HDMI 4K*2 1080p/24 1080p 1080i 720p 480p/576p 480i/576i HDMI 1080p ✔ ✔ ✔ 1080i ✔ ✔ ✔ ✔ ✔ 720p ✔ ✔ ✔ ✔ ✔ 480p/576p ✔ ✔ ✔ ✔ ✔ ✔ 480i/576i ✔ ✔ ✔ ✔ ✔ ✔ ✔ Component
  • Onkyo PR-SC5509 | Owner Manual - Page 98
    Q, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV controller can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between
  • Onkyo PR-SC5509 | Owner Manual - Page 99
    Control) operation can not be guaranteed. 2 Change each item in the "HDMI" menu according to the following settings: • HDMI Control(RIHD): On • Audio Return Channel and selects the input to which the AV controller is connected. 5. Following the operating instructions of the TV, select "Use the TV
  • Onkyo PR-SC5509 | Owner Manual - Page 100
    PC are not supported. • The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there's no sound from a component connected via HDMI, check its setup. Refer to the connected component's instruction manual for details. En
  • Onkyo PR-SC5509 | Owner Manual - Page 101
    . Consult your ISP if you have any problems with your Internet connection. • The AV controller uses DHCP to configure its network settings automatically. If you want to configure these settings manually, see "Network" (➔ page 68). • The AV controller does not support PPPoE settings, so if you have
  • Onkyo PR-SC5509 | Owner Manual - Page 102
    The computer or media server must be on the same network as the AV controller. • Up to 20000 folders can be displayed, and support the USB Mass Storage Class standard. Refer to your USB MP3 player's instruction manual for details. • Protected WMA music files on an MP3 player cannot be played. • Onkyo
  • Onkyo PR-SC5509 | Owner Manual - Page 103
    correctly. Note • With remote playback, the AV controller does not support the following music file formats: FLAC and Ogg , and 96 kHz are supported. • Quantization bit: 8 bit, 16 bit, 24 bit * Only for playback via network. About DLNA The Digital Living Network Alliance is an international, cross
  • Onkyo PR-SC5509 | Owner Manual - Page 104
    PRE OUT) Maximum XLR Output Level and Impedance 11.0 V/470 Ω (PRE OUT) Phono Overload 70 mV (MM 1 kHz 0.5%) Frequency Response 5 Hz - 100 kHz/+1 dB, -3 dB (Direct mode) Tone Control Channel 40 W No-sound Power Consumption ■ HDMI Input Output Video Resolution Audio Format Supported IN
  • Onkyo PR-SC5509 | Owner Manual - Page 105
    Memo En 105
  • Onkyo PR-SC5509 | Owner Manual - Page 106
    Memo En 106
  • Onkyo PR-SC5509 | Owner Manual - Page 107
    Memo En 107
  • Onkyo PR-SC5509 | Owner Manual - Page 108
    -1687, 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/ The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK Tel: +44-(0)1628-473-350 Fax: +44-(0)1628-401-700
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
AV Controller
PR-SC5509
Instruction Manual
Thank you for purchasing an Onkyo AV Controller.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Controller.
Please retain this manual for future reference.
Contents
Introduction
...................................
2
Connections
.................................
12
Turning On & Basic Operations
......
25
Advanced Operations
.................
48
Controlling Other Components
...77
Appendix
......................................
86
E
n