Onkyo PR-SC5530 Basics Guide

Onkyo PR-SC5530 Manual

Onkyo PR-SC5530 manual content summary:

  • Onkyo PR-SC5530 | Basics Guide - Page 1
    PR-SC5530 AV CONTROLLER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/prsc5530/adv/en.html En
  • Onkyo PR-SC5530 | Basics Guide - Page 2
    r Connecting and Operating Onkyo RI Components r Control function between the unit and external component r Firmware Update r Troubleshooting r Reference Information Advanced Manual found here http://www.onkyo.com/manual/prsc5530/adv/en.html Features r Supports playback in Dolby Atmos
  • Onkyo PR-SC5530 | Basics Guide - Page 3
    Cable set-top box, etc. For how to make settings, see the Advanced Manual. To connect the TV and the unit, connect the HDMI OUT MAIN jack analog audio input jack of the unit. zAudio connection with a TV not supporting ARC ¼ Select an appropriate connection for your TV. DIGITAL OPTICAL OUT AUDIO
  • Onkyo PR-SC5530 | Basics Guide - Page 4
    Your player and TV need to support HDCP2.2. r To play 4K or . For more information, see the Advanced Manual. XLR balanced cable 4 Connection with details, refer to the turntable's instruction manual. ¼If the turntable has a analog or vice versa. AV Controller ¼If multiple video signal inputs
  • Onkyo PR-SC5530 | Basics Guide - Page 5
    2 Connecting speakers Speaker layout 9 " I' F # $ % To enjoy the Dolby Atmos listening mode, Height 1 speakers, Surround back speakers or Wide speakers need to be installed. " # Front speakers $ Center speaker % & Surround speakers ' Subwoofer 7 8 Surround back speakers 9 F Height 1
  • Onkyo PR-SC5530 | Basics Guide - Page 6
    L/ I Wide L Notes for speaker connection This unit works as an AV controller when connected with a separately sold multichannel power amplifier. Connect a power amplifier to the power amplifier with speakers, refer to the instruction manual of the multichannel power amplifier. r Set the crossover
  • Onkyo PR-SC5530 | Basics Guide - Page 7
    PUSH PUSH XLR balanced cable Step 1: Connections Connecting a subwoofer with built-in power amplifier The maximum four units of two systems of subwoofer with built-in power amplifier can be connected to this unit. Use the SW1/2 PRE OUT RCA jack or SUBWOOFER 1/2 PRE OUT XLR jack according to the
  • Onkyo PR-SC5530 | Basics Guide - Page 8
    . When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception. AM loop antenna (supplied) Network connection You can enjoy Internet radio and DLNA by connecting the unit to LAN. The unit can be connected to the router with an Ethernet
  • Onkyo PR-SC5530 | Basics Guide - Page 9
    firmware update available, the "Firmware Update Available" message will appear. To execute updating, select "Update Now" with the cursor buttons of the remote controller Step : Network Connection „ 1st Step : AccuEQ Room Calibration The test tone coming , see the Advanced Manual. Initial Setup AccuEQ
  • Onkyo PR-SC5530 | Basics Guide - Page 10
    be shown on the lower left of the screen. 5. The test tones sound from the connected speakers and automatic speaker setting starts. controller. r If there is an error message, follow the on-screen instruction to remove the error cause. About THX playback THX recommends setting the speakers manually
  • Onkyo PR-SC5530 | Basics Guide - Page 11
    "ONK" for ONKYO) and search for the remote control code. The guidance will also explain how to set the remote controller. „ 4th Step : Network Connection Initial Setup Network Connection Do you want to connect network connection? It gives you network services that our AV receiver support. If you
  • Onkyo PR-SC5530 | Basics Guide - Page 12
    GUIDE PLAYLIST ENTER PREV CH PLAYLIST Q SETUP HOME RETURN z To control the unit: The remote controller of this unit has the remote mode function for controlling other devices. You cannot control this unit when the remote controller allows you to make advanced settings and use Internet radio
  • Onkyo PR-SC5530 | Basics Guide - Page 13
    Digital, Dolby Atmos and DTS. Select the desired mode r For details on the listening modes, see the Advanced Manual. "Direct" for playing the input signals as-is Selecting Muting Temporarily: Press MUTING on the remote controller. To cancel the muting, press MUTING again, support the A2DP profile. 13
  • Onkyo PR-SC5530 | Basics Guide - Page 14
    the cursors of the remote controller and press ENTER to confirm and start playback. Internet radio service: You can listen to TuneIn or such other Internet radio stations registered in advance. DLNA : You can play music files stored in the PC or NAS device connected to the network. Select the server
  • Onkyo PR-SC5530 | Basics Guide - Page 15
    to the sound. The adjustment you made will be reset to the previous status when you turn the unit to TrueHD, Multichannel, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Express, DSD, and DTS Neo:X Cinema. OUT jack to be used for output. Control Monitor: Select the main room TV or
  • Onkyo PR-SC5530 | Basics Guide - Page 16
    , select "Setup" - "1. Input/Output Assign" - "Monitor Out" - "Zone 2 Monitor Out" and set the setting to "Use". r Refer to "Control Monitor" in "Using Quick Setup menu" for using CEC link function with TV in the separate room. „ b. Connecting a TV in a separate room using composite video
  • Onkyo PR-SC5530 | Basics Guide - Page 17
    the RI linked system function (interlink between Onkyo components) is disabled. r Pressing INPUT SELECTOR on the remote controller while you are using the remote controller for Zone 2 or Zone 3 will switch the controlled target to the main room. To control Zone 2 or Zone 3 again, press ZONE several
  • Onkyo PR-SC5530 | Basics Guide - Page 18
    if the unit enters standby mode when the HDMI Through, network standby or Wakeup from Bluetooth function is enabled. G PHONES jack: Stereo headphones with a standard plug are connected. H ZONE 2 button, ZONE 3 button and OFF button: Controls the multi-zone function. I TONE and Tone Level buttons
  • Onkyo PR-SC5530 | Basics Guide - Page 19
    camera or such other device is connected. V WHOLE HOUSE MODE button: Controls the WHOLE HOUSE MODE function to play the same source in all the Lights when NET or USB is controlled. 6 NET: Stays lit when the "NET" input is selected and the unit is connected to the home network (LAN). It will flash
  • Onkyo PR-SC5530 | Basics Guide - Page 20
    56 7 89 F 4 G HI PUSH PUSH J KL M Rear Panel 1 DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input. 2 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit. 3 ETHERNET port: Used for LAN connection 4 Wireless antenna: Used for
  • Onkyo PR-SC5530 | Basics Guide - Page 21
    CEC link function of the unit to on. It is also necessary to make the HDMI linked system setting on the TV. See the TV's instruction manual for details. The remote controller does not work. r Be sure to press RECEIVER first before operating the unit with the remote
  • Onkyo PR-SC5530 | Basics Guide - Page 22
    2B/CB, PR/CR) /1710 kHz Preset Channel 40 Network Section Ethernet LAN 10BASE-T/100BASE-TX Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM Supported
  • Onkyo PR-SC5530 | Basics Guide - Page 23
    it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Ultra2 Plus are trademarks, service marks, or certification marks of the Digital Living Network Alliance. This link to other services or websites which are not under the control of any company
  • Onkyo PR-SC5530 | Basics Guide - Page 24
    RoHS Directive, 2011/65/EU - Hereby, Onkyo Corporation, declares that this PR-SC5530 is in compliance with the essential requirements U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800
  • Onkyo PR-SC5530 | Basics Guide - Page 25
    Power On ⿠ Turning network standby on allows you to use the Auto Power On function when using the Spotify application. „Support pour Spotify Connect Spotify será compatible mediante la actualización del firmware de la unidad. Simplemente haga clic en Onkyo Corporation Japan. All rights reserved.
  • Onkyo PR-SC5530 | Basics Guide - Page 26
    der Auto Power Ein-Funktion, wenn Sie die Anwendung Spotify verwenden. „Ondersteuning voor Spotify Connect Spotify Connect kan worden ondersteund door de firmware van het toestel bij te werken. Klik simpelweg op het pictogram Connect en selecteer het toestel op het weergavescherm van de Spotify
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

PR-SC5530
AV CONTROLLER
Basic Manual
Advanced Manual found here
E
n