Onkyo TX-DS575x Owner Manual - Page 33

Using the remote controller MD operation buttons Numeric keys, ENT button MODE AUDIO TAPE operation buttons MODE MD Controlling an Onkyo MD recorder Note: Make sure that you point the transmission part on the remote controller toward the sensor area on the MD recorder. 1. Press the MODE MD/AUX button. 2. Press the desired MD operation button. Turning the power on and off to the MD recorder ON/STNBY : Turning on or standby the power to the MD recorder MD operation buttons : Track Down : Track Up : Playback : Stop REC EJECT 1~9, +10 ENT : Fast reverse : Fast forward : Record : Pause : Eject : Numeric keys : Confirm You may also use the following buttons: VOL q/u : Adjusting the volume level of the TXDS575X MUTING : Muting the sound from the TX-DS575X Controlling an Onkyo tape deck Note: First connect an Onkyo tape deck using the page 9.) connection. (See 1. Press the MODE AUDIO/TAPE button. 2. Press the desired tape deck operation button. TAPE operation buttons : Playback : Stop : Fast rewind : Fast forward REC : Recording/pause : Reverse play You may also use the following buttons: VOL q/u : Adjusting the volume level of the TXDS575X MUTING : Muting the sound from the TX-DS575X MODE SAT, CABLE, VCR, TV MODE SAT, CABLE, VCR, and TV buttons No preset codes are programmed into the MODE SAT, CABLE, VCR, and TV buttons. You can use these buttons to program remote controller signals of other devices. (See page 34.) You may use the following buttons: VOL q/u : Adjusting the volume level of the TXDS575X MUTING : Muting the sound from the TX-DS575X 33