Onkyo TX-DS575x Owner Manual - Page 6

Audio equipment connections • On each pair of input jacks, a red connector (marked R) corresponds to the right Audio connection cable channel, and a white connector (marked L) to the left channel. L (Left) L • Please refer to the instruction manual of each component when making any con- nections. • This receiver is designed for use with turntables using moving magnet cartridges. R (Right) R • Insert the plugs and connectors securely. Remember that improper connection can result in noise, poor performance, or damage to the equipment. CD Player OUTPUT (ANALOG) DIGITAL COAXIAL OUTPUT DIGITAL OPTICAL OUTPUT See page 7 Improper connection Insert completely ANTENNA WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE DO NOT OPEN NE PAS OUVRIR R L V L S DVD I N AM VIDEO 3 R I N L FRONT SPEAKERS A R VIDEO 2 FM 75 GND VIDEO 1 L R PHONO CD (PLAY) I N TAPE OUT (REC) R V L I N CENTER SPEAKER I N FRONT OUT R L MONITOR OUT SURROUND S R L SUBWOOFER PRE OUT CENTER SUB WOOFER MULTI CH INPUT DIGITAL INPUT COAXIAL 2 FRONT SPEAKERS B COAXIAL 1 L OPTICAL 2 OPTICAL 1 R SURROUND SPEAKERS L R REMOTE CONTROL AC OUTLETS AC 230V 50Hz SWITCHED TOTAL 100W MAX. AV RECEIVER MODEL NO. TX-DS575X Ground OUTPUT Turntable INPUT (REC) OUTPUT (PLAY) Tape Deck : signal flow To wall outlet Do not plug in the power cord until all connections have been made. • A DVD or other component equipped with a digital output can be connected to this receiver. The digital connection must be used in conjunction with an analog connection, because if the analog cable is disconnected, the audio output from TAPE OUT (REC) and VIDEO 1 OUT will not work. • Remove the protective cap attached to the DIGITAL INPUT OPTICAL jack before making the connec- tion. When this jack is not used, replace the protective cap. 6