Home » Onkyo Manuals » Audio Receivers » Onkyo TX-SR701 » Manual Viewer

Onkyo TX-SR701 Owner Manual

Onkyo TX-SR701 - THX Select Digital A/V Receiver Manual

UPC - 751398005183

View all Onkyo TX-SR701 manuals

Add to My Manuals
Save this manual to your list of manuals

Onkyo TX-SR701 manual content summary:

Onkyo TX-SR701 | Owner Manual - Page 1
Receiver TX-SR701/701E TX-SR601/601E Instruction Manual Contents Before using 2 Facilities and connections 8 Setup and operation 31 Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions
Onkyo TX-SR701 | Owner Manual - Page 2
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. adequate ventilation. Leave 20 cm (8") of free space at the top and sides and 10 the obsolete outlet. 10. Power-Cord Protection - Power-supply cords should be manufacturer's instructions, and should use a mounting
Onkyo TX-SR701 | Owner Manual - Page 3
Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder. 2. AC Fuse The fuse is located inside the chassis and is not user-serviceable. If power does not come on, contact your Onkyo authorized service station. 3. Care From time to time you
Onkyo TX-SR701 | Owner Manual - Page 4
does not reach the TX-SR701/701E/601/601E remote sensor ........ 22 Connecting the remote zone (Zone 2) speakers ...23 When using the ZONE 2 SPEAKERS terminals 23 When using the ZONE 2 LINE OUT terminals 23 When using the ZONE 2 PRE OUT terminals (TX-SR701/701E only 23 Connections 24 AC OUTLETS
Onkyo TX-SR701 | Owner Manual - Page 5
74 Appendix Troubleshooting guide 75 POWER 75 SPEAKERS 75 FM/AM TUNER 75 VIDEO and AUDIO 76 REMOTE CONTROLLER 76 OTHER 76 If one of the messages shown below appears 77 Speciﬁcations (TX-SR701/701E 78 Speciﬁcations (TX-SR601/601E 79 Declaration of Conformity We, ONKYO EUROPE ELECTRONICS
Onkyo TX-SR701 | Owner Manual - Page 6
preprogrammed learning remote with macro and mode-key LEDs I 12V Trigger output for Zone 2 I IR input terminal I Zone 2 Lineout 6 TX-SR601/601E Ampliﬁer channel input for DVD-Audio and Super Audio CD I Rec out selector and Zone 2 selector I Pre-out terminal for Subwoofer I Color-coded speaker
Onkyo TX-SR701 | Owner Manual - Page 7
Back Right Zone 2 Right Zone 2 Right Remote controller × 1 TX-SR701/701E: RC-533M TX-SR601/601E: RC-515M Batteries (AA, R6) × 2 1 2 3 Speaker Cable Speaker cable label × 1 Before using this unit Conversion plug × 1 (Use this plug if the power cord plug of the TXSR701/701E/601/601E does not
Onkyo TX-SR701 | Owner Manual - Page 8
the TX-SR701/701E/601/601E. Front panel STANDBY/ON AUDIO ADJUST SETUP RETURN TUNI NG MASTER VOLUME POWER ON OFF REC OUT ZONE AUDIO R STANDBY/ON POWER ON OFF REC OUT ZONE 2 OFF PHONES LEVEL STANDBY DISPLAY RT/PTY/TP DIRECT LISTENING MODE STEREO SURROUND
Onkyo TX-SR701 | Owner Manual - Page 9
standby state. In the standby state, the display is turned off and the TX-SR701/701E/ 601/601E cannot be operated. STANDBY indicator [7, 28] Lights when the TX-SR701/701E/601/601E is in the standby state and when a signal is received from the remote controller. DISPLAY button [45] Press to display
Onkyo TX-SR701 | Owner Manual - Page 10
stereo jack for connecting stereo headphones. REC OUT, ZONE 2, OFF, LEVEL / buttons, and ZONE 2 indicator [60, 61] The REC OUT and ZONE 2 buttons allow you to use the TXSR701/701E/601/601E to output to a remote zone (Zone 2) or to another component for recording (Rec Out). To turn off the output
Onkyo TX-SR701 | Owner Manual - Page 11
button is pressed, shows the listening mode and input source format. However, does not show the source format when the FM or AM source is selected. SLEEP indicator Lights when the sleep timer is turned on. ZONE 2 indicator Lights when using the remote zone (Zone 2). REC OUT indicator Lights when
Onkyo TX-SR701 | Owner Manual - Page 12
remote controller. It also ﬂashes when a button is pressed when the battery power is low. ON/STANDBY button [28] ON: Press to turn on the TX-SR701/701E/601/601E. STANDBY: Press to place the TX-SR701/701E/601/601E other Onkyo components connected to the TXSR701/701E/601/601E using the terminals.
Onkyo TX-SR701 | Owner Manual - Page 13
and the SURR button to turn on the tone control. SP A, SP B: Not used with the TX-SR601/601E. CINE FLTR (TX-SR601/601E): Depending on the listening mode, you can turn the CinemaFILTER function on or off. [51] Re-EQ (TX-SR701/701E): Depending on the listening mode, you can turn the Re-EQ function on
Onkyo TX-SR701 | Owner Manual - Page 14
to the instructions that came with the component that you are connecting. • Do not plug in the power cord until all connections have been properly made. • For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow
Onkyo TX-SR701 | Owner Manual - Page 15
MAX. SUB WOOFER R AV RECEIVER MODEL NO. TX-SR 701E Connecting your audio components [16] Connecting your video IR IN [22] components [17] When using the ZONE 2 SPEAKERS terminals [23] PRE OUT [21] When using the ZONE 2 PRE OUT terminals [23] TX-SR601/601E Connecting antennas [29] COMPONENT
Onkyo TX-SR701 | Owner Manual - Page 16
(TAPE) Using RCA audio cables, connect the output jacks (PLAY) of the device to the TAPE IN audio jacks of the TX-SR701/701E/601/ 601E and connect the input jacks (REC) of the device to the TAPE OUT audio jacks of the TX-SR701/701E/601/601E. Make sure that you properly connect the left channels to
Onkyo TX-SR701 | Owner Manual - Page 17
your video components Below is an example of how you can connect your video components to the TX-SR701/701E/601/601E. Refer to the diagram above for the following connection examples. Video signal will be output if you use any one of COMPONENT, S, or composit terminals. However, you are recommended
Onkyo TX-SR701 | Owner Manual - Page 18
Input" (see page 52). Note: If the DVD player has both 5.1-channel audio outputs and 2channel audio outputs, and you want to connect the DVD player only using the FRONT L/R jacks on the TX-SR701/701E/601/ 601E, use the 2-channel audio output jacks on the DVD player. 18 Component video output Video
Onkyo TX-SR701 | Owner Manual - Page 19
VIDEO 1 OUT IN DVD IN REMOTE CONTROL MONITOR OUT V ZONE 2 12 V TRIGG OUT Using an RCA audio cable, connect the audio output jack of the device to the VIDEO 3 IN audio jacks of the TX-SR701/701E/601/ 601E. Make sure that you properly connect the left channel to the L jack and the right channel
Onkyo TX-SR701 | Owner Manual - Page 20
). Using RCA audio cables, connect the audio output jacks of the device to the VIDEO 2 IN audio jacks of the TX-SR701/701E/601/ 601E and connect the audio input jacks of the device to the VIDEO 2 OUT audio jacks of the TX-SR701/701E/601/601E. Make sure that you properly connect the left channels to
Onkyo TX-SR701 | Owner Manual - Page 21
it to the VIDEO 4 S VIDEO jack of the TX-SR701/701E/ 601/601E using an S video cable. Using an RCA audio cable, connect the audio output jack of the device to the VIDEO 4 AUDIO jacks of the TX-SR701/701E/601/ 601E. Make sure that you properly connect the left channel to the L jack and the right
Onkyo TX-SR701 | Owner Manual - Page 22
IR IN TX-SR701/701E/601/601E IR IN Connecting block IR Receiver TX-SR701/ 701E/601/ 601E Remote Controller In the cabinet : Signal ﬂow The IR IN input allows you to control the TX-SR701/701E/601/ 601E from the remote zone (Zone 2) with the remote controller even though the remote zone may
Onkyo TX-SR701 | Owner Manual - Page 23
of the TX-SR701/701E/601/601E are of a ﬁxed output level. When using the ZONE 2 PRE OUT terminals (TX-SR701/701E only) You can connect the ampliﬁer for the remote zone (Zone 2) to the ZONE 2 PRE OUT terminals and connect the remote zone speakers. When you connect the speakers to the ZONE 2 SPEAKERS
Onkyo TX-SR701 | Owner Manual - Page 24
on the TX-SR701/701E/601/601E remote controller while the TX-SR701/701E/601/601E is turned on, all -connected components (DVD players, CD players, MD recorders, tuners, etc.) are also turned on. 24 Ex: Onkyo CD player connector Ex: Onkyo cassette tape deck To connect components using the terminal
Onkyo TX-SR701 | Owner Manual - Page 25
, it is very important to place them properly for the optimum sound space for your listening pleasure. Be sure to refer to the instruction manuals that came with the speakers during placement and connection. Furthermore, be aware that for surround playback, the conﬁguration and placement of your
Onkyo TX-SR701 | Owner Manual - Page 26
Connecting speakers Using the speaker cable labels The positive speaker terminals on the TX-SR701/701E/601/601E are color coded for easy identiﬁcation. Attach the supplied speaker labels to the speaker cables, and then match the colors on the speaker cables to the corresponding terminals. Speaker
Onkyo TX-SR701 | Owner Manual - Page 27
WOOFER R AV RECEIVER MODEL NO. TX-SR 701E Surround right speaker Subwoofer Surround back speaker Surround left speaker Connecting speakers After determining the layout of your speaker system, it is now necessary to connect the speakers correctly to your TX-SR701/ 701E/601/601E. Caution: • Be
Onkyo TX-SR701 | Owner Manual - Page 28
button again, the receiver returns to standby state. Turn off Turning on the power from the remote controller Before you can use the remote controller, you must perform step 1 above and place the TX-SR701/701E/601/601E in the standby state. 1. Press the RCVR MODE button. The RCVR MODE button lights
Onkyo TX-SR701 | Owner Manual - Page 29
an outdoor antenna is recommended. Connecting the AM loop antenna: The AM loop antenna is for indoor use only. Set it in the direction and position where you receive the clearest sound. Put it as far away as possible from the TX-SR701/701E/601/601E, televisions, speaker cables, and power cords. If
Onkyo TX-SR701 | Owner Manual - Page 30
IN DVD M IN O Note: If you are using the TX-SR701/701E/601/601E worldwide model in a region where AM frequencies are delineated by 10-kHz steps, be sure to set the "AM Frequency Step" Setup setting accordingly (see page 55). To receiver To TV (or VCR) Connecting the antenna cable to the 75/300
Onkyo TX-SR701 | Owner Manual - Page 31
Distance 4.Level Calibration 5.Input Setup 6.Preference |ENTER|Quit:|SETUP| 3. Press the ENTER button. TX-SR701/701E/601/601E Remote controller The speaker conﬁguration menu appears. TX-SR701/701E TX-SR601/601E * Menu 1232....*SSLS*ppep*eeve*aaea*kklk*eee*rrCr*a*CDlC*oiio*nsbn*ftrf*iaai
Onkyo TX-SR701 | Owner Manual - Page 32
Select when a subwoofer is connected. No: Select when a subwoofer is not connected. TX-SR701/701E/601/601E TUNI NG Remote controller PRESET TUNI NG PRESET 5. Use the and cursor buttons to select "Front L/R" and then use the and cursor buttons to select the front speaker setting. Large: Select if
Onkyo TX-SR701 | Owner Manual - Page 33
to set the distance from the subwoofer speaker to your normal listening position. Press the RETURN button to return to the main menu. Press the SETUP button on the front panel or SETUP button on the remote controller button to exit the Setup menu. 2. Use the and cursor buttons to select "Unit
Onkyo TX-SR701 | Owner Manual - Page 34
the proper sound space and dynamics. Note: The speaker level settings here are not effective for multi-channel input sources. To adjust the speaker levels for multi-channel input sources, you will need to use the CH SEL, LEVEL , and LEVEL buttons on the remote controller. See page 44. TX-SR701/701E
Onkyo TX-SR701 | Owner Manual - Page 35
Using the internal channel noise generators, set each channel so that you read a 75 decibel sound pressure level. Using the remote TX-SR601/601E will now emit the pink noise from the center speaker. (2) Using the and cursor buttons, adjust the volume level of the noise from the center speaker
Onkyo TX-SR701 | Owner Manual - Page 36
Conﬁguring the speakers Using the remote controller 1. Press the TEST button. You will hear a pink noise which will be emitted from the front left speaker. (1) Remember the volume level of this noise and then press the CH SEL button. The TX-SR601/601E will now emit the pink noise from the center
Onkyo TX-SR701 | Owner Manual - Page 37
S VIDEO VIDEO L AUDIO R TUNER One of the features of the TX-SR701/701E/601/601E that is most frequently used is its ability to play FM and AM broadcast radio stations. The TX-SR701/701E/601/601E provides a number of listening modes perfect for listening to the radio and getting the most out of
Onkyo TX-SR701 | Owner Manual - Page 38
remote controller: 1. Press the RCVR MODE button. The RCVR MODE button lights. 3. Using the PRESET / buttons, select a preset number (from 1 to 40) to assign the station. TUNI NG PRESET 4. Press the ENTER button to ﬁnalize the procedure. The memory indicator turns the TX-SR701/701E/601/601E. 1.
Onkyo TX-SR701 | Owner Manual - Page 39
provides you with various services so that you can Though they can be tuned into by using the TUNING buttons as normal stations, RDS appear on the display if the TX-SR701E/601E receives characters that cannot be displayed correctly usually from past or present sales charts (e.g., Top 40). Rock music
Onkyo TX-SR701 | Owner Manual - Page 40
received, the characters will scroll across the front display. • If "No Text Data" appears on the display, RT information is not available. • The display shows the frequency for 3 seconds and returns to program service name. 4. Press the ENTER button. The TX-SR701E/601E display. 3. Using the /
Onkyo TX-SR701 | Owner Manual - Page 41
the volume level of all the speakers connected to the TX-SR701/701E/601/601E together. If headphones are connected, this also adjusts the volume heard from the headphone speakers. To adjust the volume, either press the VOL buttons on the remote controller or turn the MASTER VOLUME dial. To increase
Onkyo TX-SR701 | Owner Manual - Page 42
" setting is selected on the TX-SR701/701E/601/601E, the DTS encoded signal will not be decoded and noise will be output. This noise could damage the ampliﬁer and speakers. Therefore, be sure to select "Auto" or "DTS" and use the digital input jacks (OPT or COAX) to connect the DTS source. • If you
Onkyo TX-SR701 | Owner Manual - Page 43
TX-SR701/701E/601/601E is put in standby. Using the remote controller: 1. Press the RCVR MODE button. 2. Press the CH SEL button and select the desired speaker /601/601E, you can have "MD" appear when the TAPE source button is pressed. By changing the display, when an Onkyo MD recorder is -connected,
Onkyo TX-SR701 | Owner Manual - Page 44
the TX-SR701/ 701E/601/601E front panel. When you connect the headphones, the TX-SR701/701E/601/601E will enter the STEREO mode automatically and no sound will be heard from the speakers. When the headphones are unplugged, the TX-SR701/701E/601/601E returns to its original listening mode. When using
Onkyo TX-SR701 | Owner Manual - Page 45
/ PURE AUDIO TX-SR601/601E DIRECT Remote controller "Direct" appears on the display and the tone control is turned off. Notes: • (TX-SR701/701E only) When you turn on the tone control, the settings in "Speaker Conﬁg" and "Speaker Distance" will be used for multichannel playback. • (TX-SR701/701E
Onkyo TX-SR701 | Owner Manual - Page 46
Listening Modes The TX-SR701/701E/601/601E's surround sound enables you to enjoy the presence of a movie theater or concert hall in your room. The conﬁguration of the speakers is very important for the surround sound. Refer to "Connecting speakers" on page 25. Before using a listening mode, make
Onkyo TX-SR701 | Owner Manual - Page 47
allows you to enjoy monaural sound with the atmosphere of a movie theater. Enhance With multi channel speakers, you will get more active surround effect. When using the surround back speaker, the sound effect moves naturally through the surround back speaker position. This mode is good for music and
Onkyo TX-SR701 | Owner Manual - Page 48
played in the DTS mode. The DTS-ES modes are not used even when the DTS source has the DTS-ES ﬂag. • While playing back Dolby Digital (Multichannel) sources Select whether or not to play back Dolby Digital sources using the matrix 6.1-channel decoder when using surround back speakers. Each time you
Onkyo TX-SR701 | Owner Manual - Page 49
order. Re-EQ function for movies (TX-SR701/701E only) Re-EQ (re-equalization) takes the edginess or "brightness" out of your home cinema sound to compensate for the fact that sound mixed for theaters may sound too bright when played back through speakers in the home environment. This can be set to
Onkyo TX-SR701 | Owner Manual - Page 50
, see page 54 . When using the remote controller, ﬁrst press the RCVR MODE button before preceding to the step below. Press one of the listening mode buttons to select the listening mode. TX-SR601/601E DIRECT LISTENING MODE STEREO SURROUND DSP Remote controller DIRECT: Changes the listening
Onkyo TX-SR701 | Owner Manual - Page 51
lter (CinemaFILTER) loading for movies (TX-SR601/601E only) The CinemaFILTER function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers is too bright. This function
Onkyo TX-SR701 | Owner Manual - Page 52
. Press the SETUP button on the front panel or SETUP button on the remote controller to exit the Setup menu. a. Digital Input This setting tells the TX-SR701/701E/601/601E which input source button on the front panel is connected with which digital input jack on the rear panel. For example, if the
Onkyo TX-SR701 | Owner Manual - Page 53
at the "b. Component Video" setting is output to the COMPONENT VIDEO OUT jacks. Use this setting if you connect monitors like TV to the COMPONENT VIDEO OUT jacks on the TX-SR701/701E/601/601E. For example, when you connect the DVD player to the COMPONENT VIDEO INPUT 1 jacks, select "DVD" as input
Onkyo TX-SR701 | Owner Manual - Page 54
Input Setup The listening mode will be reset to the mode you set here after turning on the TX-SR701/701E/601/601E even if you change the listening mode using the LISTENING MODE buttons. When you set this setting to "Last Valid", the listening mode will be the one you used before. Notes: • For "e.
Onkyo TX-SR701 | Owner Manual - Page 55
(TX-SR601/601E) Use this setting when you have a remote control sensor connected to the IR IN terminal. The setting in this menu tells the TX-SR701/ 701E/601/601E whether the remote control sensor is being used for operation of the TX-SR701/701E/601/601E in the main zone or the remote zone (Zone
Onkyo TX-SR701 | Owner Manual - Page 56
Preference Preference To display the Preference menu: 1. Display the main menu. 2. Use the and cursor buttons to select "6. Preference" and then press the ENTER button. The "Preference" menu appears. TX-SR701/701E TX-SR601/601E * Menu 1236....*SSLP*pper*eeve*aaef*kkle*eer*rrCe*an*CDlc*oiie*nsb*ftr*
Onkyo TX-SR701 | Owner Manual - Page 57
sound of "Front L/R" speakers output also from the subwoofer. To enable this function, in the "Speaker Conﬁg" menu, set the "Subwoofer" to "Yes" and "FrontL/R" to "Large." The Double Bass function is effective especially when the input is monaural, 2-channel or PCM 96kHz signal. On: Select to turn
Onkyo TX-SR701 | Owner Manual - Page 58
Center In the Theater-Dimensional mode, if the speaker system has a center speaker, the center channel signal can be output from the center speaker. For instance, in systems where the front left and right speakers are small, use of the center speaker may provide a better sound space and reduce
Onkyo TX-SR701 | Owner Manual - Page 59
be set from -3 to +3 decibels. Lowering this setting can improve the sound when the deﬁnition is unclear or when the sound feels unnatural. Dialog Enhance If the dialog from the center channel is difﬁcult to hear in the Theater-Dimensional mode, use this setting to improve the clarity. On: Select to
Onkyo TX-SR701 | Owner Manual - Page 60
on the TX-SR701/701E/601/601E ﬂashes for ﬁve seconds. During this time, you will not be able to perform operations in the main zone using the remote controller. Adjusting the volume for the remote zone When the remote zone (Zone 2) speakers are connected to the ZONE 2 SPEAKERS terminals, or
Onkyo TX-SR701 | Owner Manual - Page 61
from digital to analog or vice versa. When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well. Recording the input source (REC OUT selector) When using the TX-SR701/701E/601/601E to record a source, you must select that source
Onkyo TX-SR701 | Owner Manual - Page 62
Recording Recording both the audio and video The TX-SR701/701E/601/601E also allows you to record the audio and to make your own home movies and the like. For example, if you want to record the video from a video camera connected to VIDEO 4 and the audio from a CD player connected to CD IN, at
Onkyo TX-SR701 | Owner Manual - Page 63
TUN Overview The RC-533M/515M remote controller is a useful tool that can not only operate the TX-SR701/701E/601/601E, but also all the other components of your home theater as well. To operate any component, ﬁrst press the Mode button on the remote controller that corresponds to the component
Onkyo TX-SR701 | Owner Manual - Page 64
Numeric keys You may also use the following buttons: VOL : Adjusts volume at TX-SR701/701E/601/601E MUTING: Activates muting function at TX-SR701/701E/601/601E Note: When operating an Onkyo DVD player directly with the remote controller without connecting the terminals, pre-programming is necessary
Onkyo TX-SR701 | Owner Manual - Page 65
Using remote controller ON DISC STANDBY CD MODE VOL MUTING CD operation buttons Numeric keys Controlling an Onkyo CD player The connector of the Onkyo compact disc player must be connected to the TX-SR701/701E/601/601E (see page 24). 1. Press the CD MODE button. The CD MODE button lights. 2.
Onkyo TX-SR701 | Owner Manual - Page 66
Using remote controller Controlling an Onkyo MD recorder The connector of the Onkyo MD recorder must be connected to the TX-SR701/701E/601/601E (see page 24). 1. Press the SAT/MD MODE button. The SAT/MD MODE button lights. 2. Press the desired operation button. The buttons shaded in the ﬁgure
Onkyo TX-SR701 | Owner Manual - Page 67
, enter 613. No. 600: This code is for Onkyo DVD players that have an terminal that you are connecting to the TX-SR701/701E/601/601E with an cable. You will then operate the DVD player by pointing the remote controller at the remote control sensor on the TX-SR701/701E/601/601E. You do not need to
Onkyo TX-SR701 | Owner Manual - Page 68
until you reach the code that works (i.e. if the ﬁrst code does not work, then try the next). DVD BRAND DENON HITACHI JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHI ONKYO PANASONIC PIONEER PROSCAN RCA SONY TOSHIBA YAMAHA ZENITH SETTING No. 602, 609 603 604 605 606, 613 607 608, 613 600, 601, 613 609 610
Onkyo TX-SR701 | Owner Manual - Page 69
into them. ON: Turns on and off cable TV unit (same as STANDBY button on the remote controller) CH : Changes selected preset channel 0,1 to 9: Numeric keys ENTER: Conﬁrm You may also use the following buttons: VOL : Adjusts the volume at the TX-SR701/701E/601/601E MUTING: Activates the muting
Onkyo TX-SR701 | Owner Manual - Page 70
button on the remote controller) CH : Changes selected preset channel TV/VCR: Switches VCR input setting : Play : Stop : Rewind : Fast forward : Pause 0,1 to 9, +10: Numeric keys You may also use the following buttons: VOL : Adjusts the volume at the TX-SR701/701E/601/601E MUTING: Activates the
Onkyo TX-SR701 | Owner Manual - Page 71
MODE button to use, you will then transfer the separate commands from the other remote controller over to the RC-533M/515M remote MODE button on the remote controller, press the ENTER button and then release both buttons. The SEND/LEARN indicator lights when the MODE button is pressed and turns
Onkyo TX-SR701 | Owner Manual - Page 72
. You may, however, use these buttons to program the codes for other remote controllers. If you wish to restore the Onkyo preset codes after you program new codes, you must ﬁrst erase the new codes. • The remote controller has 357 memory slots (7 modes × 51 buttons). Some remote controllers may have
Onkyo TX-SR701 | Owner Manual - Page 73
remote controller into a single button. The series of operations are then called a macro. For example, to play a compact disc player connected to the TX-SR701/701E/601/ 601E incorrect operation. • The codes programmed into the macro turns off, then the remote controller has exited the programming mode
Onkyo TX-SR701 | Owner Manual - Page 74
macro programmed to the MACRO button is erased. Notes: • If the SEND/LEARN indicator quickly ﬂashes three times and turns off, then the remote controller has exited the erasing mode because either you have made a mistake during erasing or a time-out has occurred because no button has been pressed
Onkyo TX-SR701 | Owner Manual - Page 75
Press the MUTING button on the remote controller to turn off muting (see page 45). • Bad connections or wiring. © Check connections, speaker cables, and other wiring (see pages 16-27). • Ampliﬁer protection circuitry is activated. © Contact your Onkyo Service Center. Sound of playback source is not
Onkyo TX-SR701 | Owner Manual - Page 76
to be set due to current listening mode. © Check settings in Audio Adjust (see pages 57 to 59). Multichannel audio is not output. • DVD player is not connected to 5.1-channel input jacks. © Check connections (see page 17). Components in remote zone (Zone 2) do not operate properly. • Components are
Onkyo TX-SR701 | Owner Manual - Page 77
Troubleshooting guide If one of the messages shown below appears "Not available with headphones use" Operation not allowed because headphones are plugged into the TX-SR701/701E/601/601E. "Not available with Multichannel use" Operation not allowed while the multi-channel output is being used. "Not
Onkyo TX-SR701 | Owner Manual - Page 78
TX-SR701/701E) AMPLIFIER SECTION Continuous average power output (FTC) All channels: 100 W per channel min. RMS at 8 Ω, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 125 W min. RMS at 6 Ω, 2 channels Ω 100 mV, 470 Ω (Zone 2) 1 V, 470 Ω VIDEO REMOTE
Onkyo TX-SR701 | Owner Manual - Page 79
TX-SR601/601E) AMPLIFIER SECTION Continuous average power output (FTC) All channels: 85 W per channel min. RMS at 8 Ω, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 110 W min. RMS at 6 Ω, 2 channels Ω 100 mV, 470 Ω (Zone 2) 1 V, 470 Ω VIDEO REMOTE
Onkyo TX-SR701 | Owner Manual - Page 80
SN 29343493 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ONKYO EUROPE ELECTRONICS