Optoma EW610ST User's Manual
Optoma EW610ST Manual
 |
View all Optoma EW610ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma EW610ST manual content summary:
- Optoma EW610ST | User's Manual - Page 1
IMAGE | Advanced 29 DISPLAY 31 DISPLAY | 3D 34 SETUP 35 SETUP | Signal (RGB 38 SETUP | Security 39 SETUP | Advanced 41 SETUP | Network 42 OPTIONS 45 OPTIONS | Advanced 46 OPTIONS | Lamp Settings 47 Appendices 48 Troubleshooting 48 Replacing the lamp 53 Compatibility Modes 55 Computer - Optoma EW610ST | User's Manual - Page 2
(servicing) instructions in service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. 7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short - Optoma EW610ST | User's Manual - Page 3
Please do not open or disassemble the projector as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow the unit to cool down. Follow instructions as described on pages 53-54. ▀■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the - Optoma EW610ST | User's Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the - Optoma EW610ST | User's Manual - Page 5
projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. Product Features Monitor loop through only support in VGA1-In/ SCART/YPbPr. ▀■ XGA - Optoma EW610ST | User's Manual - Page 6
, please contact your nearest customer service center. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m Due to different applications in each Country, some regions may have different accessories. 2 × AAA Batteries Documentation : User's Manual - Optoma EW610ST | User's Manual - Page 7
Introduction Product Overview Main Unit 6 1 2 4 3 6 5 4 7 8 4 9 4 11 1. Control Panel 2. Focus Ring 3. Speaker 4. Tilt-Adjustment Feet 5. Lens 6. IR Receiver 4 10 Air Flow 7. Input / Output Connections 8. Power Socket 9. Security Bar 10. Ventilation (inlet) 11. Ventilation (outlet) 7 - Optoma EW610ST | User's Manual - Page 8
Introduction Control Panel 1 23 4 SOURCE LAMP 11 TEMP 5 MENU POWER/STANDBY HELP 10 98 7 6 1. Source 2. Enter 3. Re-Sync 4. IR Receiver 5. Temp LED 6. Help 7. Four Directional Select Keys 8. Power/Standby button and LED 9. Keystone Correction 10. Menu 11. Lamp LED English 8 - Optoma EW610ST | User's Manual - Page 9
VGA2-IN / YPbPr MIC AUDIO 2-IN (S-VIDEO/VIDEO) 12V OUT AUDIO OUT L R 12V OUT 17 16 15 14 13 12 11 Monitor loop through only support in VGA1-In/ SCART/YPbPr. 1. RJ-45 Networking Connector 2. USB Connector (Connect to PC for Remote Mouse func- tion) 3. HDMI Connector 4. VGA-Out Connector - Optoma EW610ST | User's Manual - Page 10
20 21 22 23 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 3 8. Volume +/- 4 9. 3D 10. AV mute 5 11. Video 6 12. PC/Mouse control 7 13. Mouse Left Click 14. Enter/Help 8 15. Source 9 16. Keystone +/17. Menu 10 - Optoma EW610ST | User's Manual - Page 11
Installation Connecting the Projector Connect to Computer/Notebook MOLEX 3 24 +12V Output 5 7 6 molex Due to the difference in applications for each country, some regions may have different accessories. (*) Optional - Optoma EW610ST | User's Manual - Page 12
Installation Connect to Video Sources DVD Player, Set-top Box, HDTV receiver 2 3 1 E62405SP R 4 5 6 7 8 RJ-45 USB HDMI VGA-OUT VGA1-IN / SCART / YPbPr S-VIDEO VIDEO RS-232 AUDIO1-IN (VGA1/VGA2) VGA2-IN / YPbPr MIC AUDIO 2-IN (S-VIDEO/VIDEO) 12V OUT AUDIO OUT L R 9 S-Video - Optoma EW610ST | User's Manual - Page 13
connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber. 3. Turn on the lamp by pressing " " button either on the top of (*) When Power mode (Standby) the projector or on the remote. The POWER/STANDBY LED will now turn Green. is set to Eco, the The - Optoma EW610ST | User's Manual - Page 14
When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the nearest service center if the "LAMP" LED indicator is lit red and if "POWER/STANDBY" indicator flashes amber. projector displays these symptoms. See pages 63-64 for more information - Optoma EW610ST | User's Manual - Page 15
for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring counter clockwise to raise the projector or clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring 15 - Optoma EW610ST | User's Manual - Page 16
To focus the image, rotate the focus ring until the image is clear. XGA series: The projector will focus at distances from 1.64 to 12.46 feet (0.5 to 3.8 meters). WXGA series: The projector will focus at distances from 1.64 to 11.15 feet (0.5 to 3.4 meters). Focus Ring Adjusting Projection - Optoma EW610ST | User's Manual - Page 17
Installation XGA Diagonal length (inch) size of 4:3 Screen Screen Size W x H (m) ( 16.66 12.50 300.00 6.10 4.57 20.01 14.99 This table is for user's reference only. Projection Distance (D) (m) (feet) wide tele wide tele 0.50 0.50 1.64 1.64 0.80 0.80 2.62 2.62 0.90 0.90 - Optoma EW610ST | User's Manual - Page 18
items or make adjust- ments to your selection. Use to adjust image distortion caused by tilting the projector. (±40 degrees) Help Menu (refer to page 21). Lamp LED Indicate the projector's lamp status. Temp LED Indicate the projector's temperature status. POWER/ STANDBY LED Indicate the - Optoma EW610ST | User's Manual - Page 19
or make adjustments to your selection. Adjust image distortion caused by tilting the projector. Volume +/- Adjust to increase / decrease the volume. Brightness Adjust the brightness of the image. 3D Menu HDMI Press the "3D" to turn the 3D OSD menu on/off. Press "Menu" to launch the on-screen - Optoma EW610ST | User's Manual - Page 20
User Controls Using the Remote Control AV mute Momentarily turns off/on the audio and video. S-Video Press "S-Video" to choose S-Video source. VGA Press "VGA" to choose VGA sources. Video Press "Video" to choose Composite video source. English 20 - Optoma EW610ST | User's Manual - Page 21
User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the remote control or press the "HELP" button on the control panel to open the Help Menu. 21 English - Optoma EW610ST | User's Manual - Page 22
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 48-52 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 22 - Optoma EW610ST | User's Manual - Page 23
User Controls 23 English - Optoma EW610ST | User's Manual - Page 24
will automatically detect the source. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press or "Enter" key - Optoma EW610ST | User's Manual - Page 25
(VGA) H. Position (VGA) V. Position (VGA) Exit Security Security Timer Change Password Exit Settings Presentation / Bright / Movie / sRGB / Blackboard / Classroom / User / 3D ʳ ʳ Film / Video / Graphics / PC 0~10 Warm / Medium / Cold Red Gain / Green Gain / Blue Gain / Red Bias / Green Bias / Blue - Optoma EW610ST | User's Manual - Page 26
) Exit Lamp Hours Lamp Reminder Brightness Mode Lamp Reset Exit Settings 0~99 On / Off 0~10 Default / Audio1(Phone jack) / Audio2 (RCA R/L) / MIC Optoma / User selected and the projector model you are using. (#1) "Saturation" and "Tint" are only supported in Video mode. (#2) For XGA model only. - Optoma EW610ST | User's Manual - Page 27
settings when projecting onto a blackboard (green). Classroom: This mode is recommended for projecting in a classroom. User: User's settings. 3D: Any further adjustments by the user in 3D will be saved in this mode for further use. Brightness Adjust the brightness of the image. Press the to - Optoma EW610ST | User's Manual - Page 28
User Controls "Saturation" and "Tint" functions are only supported under Video mode. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Saturation Adjust a video - Optoma EW610ST | User's Manual - Page 29
User Controls IMAGE | Advanced Degamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. PC: for PC or computer source. BrilliantColor™ This - Optoma EW610ST | User's Manual - Page 30
which sources you require. Press "Enter" to finalize the selection. The projector will not search for inputs that are not selected. Image AI Image AI improves the contrast of the picture by optimizing the brightness of the lamp according to the picture content. On: The dynamic image performance - Optoma EW610ST | User's Manual - Page 31
displayed as 4:3. When input is 16:9 above, the image is displayed as 16:9- I Aspect ratio (source detected) 4:3 16:9-I 16:9-II Native Resize image XGA model 1024 x 768 center 1024 x 576 center 854 x 480 center Resize image of native change to above description not pixels resolution. 31 English - Optoma EW610ST | User's Manual - Page 32
User Controls 16:9 or 16:10 depend on "Screen Type" setting. WXGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen laptops. LBX: This - Optoma EW610ST | User's Manual - Page 33
User Controls Each I/O has different setting of "Overscan". "Overscan" and "Zoom" can't work at same time. Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Zoom Press the to reduce the size of an - Optoma EW610ST | User's Manual - Page 34
User Controls DISPLAY | 3D "3D Sync Invert" only available when 3D is enabled. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. 3D Choose the "On" to turn this item on first if for 3D images. 3D Sync. Invert Press the "On" to invert left and right - Optoma EW610ST | User's Manual - Page 35
User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press "Enter" to finalize the selection. Rear-Desktop and Rear-Ceiling are to be used with a translucent screen. Projection Front-Desktop This - Optoma EW610ST | User's Manual - Page 36
the menu location on the display screen. Screen Type Choose the screen type from16:10 or 16:9. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to page 58~61 for the complete list of RS232 commands. Mute Choose - Optoma EW610ST | User's Manual - Page 37
Press the to decrease the volume. Press the to increase the volume. Audio Input The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source. Each Audio input can be assigned to more than - Optoma EW610ST | User's Manual - Page 38
, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the image - Optoma EW610ST | User's Manual - Page 39
default value is "1234" (first time). Security On: Choose "On" to use security verification when the turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Security Timer Use this function to set the how long (Month/Day/Hour) the - Optoma EW610ST | User's Manual - Page 40
User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. English 40 - Optoma EW610ST | User's Manual - Page 41
is powered on. Optoma: The default startup screen. User: Use stored picture from "Logo Capture" function. For successful logo capture, please ensure that the onscreen image does not exceed the projector's native resolution. (XGA:1024x768 or WXGA:1280x800). Logo Capture Press to capture - Optoma EW610ST | User's Manual - Page 42
the OSD menu, the new setting will take effect on next open. On: Assign an IP address to the projector from an external DHCP server automatically. Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. Gateway Select the default gateway of the - Optoma EW610ST | User's Manual - Page 43
your projector 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter projector IP address, you will can not link to your service server. 4. Open "Control Panel" to control your projector. When making a direct connection from your computer to the projector - Optoma EW610ST | User's Manual - Page 44
open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click "LAN Settings..." Step 9: Open "Control Panel" to control your projector. English 44 - Optoma EW610ST | User's Manual - Page 45
Off: Choose "Off" to show the "searching" message. Keypad Lock When the keypad lock function is "On", the control panel will be locked however, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the control panel. Background Color Use this feature to - Optoma EW610ST | User's Manual - Page 46
Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Sets the countdown timer interval. The countdown timer - Optoma EW610ST | User's Manual - Page 47
to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. When ambient temperature is over 35°C in operating, the projector will switch to STD automatically. Brightness Mode STD: Choose "STD" to - Optoma EW610ST | User's Manual - Page 48
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and securely - Optoma EW610ST | User's Manual - Page 49
keys listed below for your notebook manufacturer to send signal out from notebook to projector. Example: [Fn]+[F4] Acer [Fn]+[F5] Asus [Fn]+[F8 Each has a different way to be reactivated. Refer to your computer's manual for detailed information. Image is unstable or flickering Use "Phase" - Optoma EW610ST | User's Manual - Page 50
Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See page 16. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the - Optoma EW610ST | User's Manual - Page 51
, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section on pages 53-54. LED lighting message Message POWER/STANDBY LED (Green/Amber - Optoma EW610ST | User's Manual - Page 52
and vertically of one of the IR receivers on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 7 m (±0°) of the projector. Make sure the batteries are inserted correctly. Replace batteries if they are exhausted. English 52 - Optoma EW610ST | User's Manual - Page 53
Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector - Optoma EW610ST | User's Manual - Page 54
the two screws on the lamp module. 3 7. Lift up the lamp handle and remove the lamp module slowly and carefully. 4 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and use "Lamp Reset" after the lamp module is replaced. Lamp Reset: (i) Press "Menu" (ii) Select - Optoma EW610ST | User's Manual - Page 55
800 × 600 120 120 120Hz input signals may be 832 × 624 75 75 dependent on XGA 1024 × 768 60 60 graphics cards XGA 1024 × 768 70 70 support. Please note that XGA 1024 × 768 75 75 using resolutions XGA 1024 × 768 120 120 other than native 1152 × 870 75 75 1024 x 768 - Optoma EW610ST | User's Manual - Page 56
Appendices Computer Compatibility Mode MAC LC 13" MAC II 13" MAC 16" MAC 19" MAC MAC G4 i MAC DV i MAC DV Resolution 640 × 480 640 × 480 832 × 624 1024 × 768 1152 × 870 640 × 480 1024 × 768 1152 × 870 V-Sync (Hz) 66.66 66.68 74.55 75 75.06 60 75 75 H-Sync (KHz) 34.98 35.00 49.73 60.24 68.68 - Optoma EW610ST | User's Manual - Page 57
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments RS232 shell is grounded. 1 2 3 Pin no. 1 2 3 Spec. (from projector side) TXD RXD GND 57 English - Optoma EW610ST | User's Manual - Page 58
for in ASCII code XX=01ˀ99, projector's ID, XX=00 is for all projectors SEND to projector 232 ASCII Code HEX Code Function Description ~XX00 1 30 30 32 30 20 38 0D Classroom ~XX20 9 7E 30 30 32 30 20 39 0D 3D ~XX21 n 7E 30 30 32 31 20 a 0D Brightness n = 0 (a=30) ~ - Optoma EW610ST | User's Manual - Page 59
7E 30 30 36 30 20 36 0D Native ~XX60 7 7E 30 30 36 30 20 37 0D AUTO (XGA only) ~XX60 1 7E 30 30 36 30 20 31 0D Format 4:3 ~XX60 2 7E 30 30 36 33 30 20 31 0D 3D Mode On ~XX230 0 7E 30 30 32 33 30 20 30 0D 3D Mode Off ~XX231 1 7E 30 30 32 33 31 20 31 0D 3D Sync Invert On ~XX231 - Optoma EW610ST | User's Manual - Page 60
) ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 01 (a=30 31) ~ 99 (a=39 39 ~XX82 1 7E 30 30 38 32 20 31 0D Logo Optoma ~XX82 2 7E 30 30 38 32 20 32 0D User 30 30 31 30 39 20 31 0D Lamp Reminder On ~XX109 0 7E 30 30 31 31 34 30 20 32 31 0D 3D(3) ~XX140 22 7E 30 30 31 - Optoma EW610ST | User's Manual - Page 61
Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out READ from projector 232 ASCII Code HEX Code Function Projector Display Mode OKn n : 0/1/2/3/4/5/6/7/8 = None/Presentation/Bright/Movie/sRGB/ User/Blackboard/Classroom/3D ~XX124 1 7E 30 30 31 32 34 20 31 0D Power State OKn n - Optoma EW610ST | User's Manual - Page 62
Appendices Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Please note that damage - Optoma EW610ST | User's Manual - Page 63
For service or support please contact your local office. USA 715 Sycamore Drive Milpitas, CA 95035, USA www.optomausa.com 408-383-3700 408-383-3702 [email protected] Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada www.optoma.ca 905-361-2582 905-361-2581 [email protected] - Optoma EW610ST | User's Manual - Page 64
, Cheung Sha Wan, Kowloon, Hong Kong [email protected] www.os-worldwide.com +886-2-2218-2360 +886-2-2218-2313 [email protected] asia.optoma.com +852-2396-8968 +852-2370-1222 www.optoma.com.hk China 5F, No. 1205, Kaixuan Rd., Changning District Shanghai, 200052, China +86-21-62947376 +86-21 - Optoma EW610ST | User's Manual - Page 65
& Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no - Optoma EW610ST | User's Manual - Page 66
conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries • EMC Directive 2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
6
Package Overview
..............................
6
Product Overview
...............................
7
Main Unit
..............................................
7
Control Panel
.......................................
8
Input/Output Connections
....................
9
Remote Control
..................................
10
Installation
.....................................
11
Connecting the Projector
..................
11
Connect to Computer/Notebook
........
11
Connect to Video Sources
.................
12
Powering the projector On / Off
........
13
Powering On the Projector
.................
13
Powering Off the Projector
.................
14
Warning Indicator
...............................
14
Adjusting the Projected Image
..........
15
Adjusting the Projector’s Height
........
15
Adjusting the Projector’s Focus
.........
16
Adjusting Projection Image Size
........
16
User Controls
................................
18
Control Panel & Remote Control
......
18
Control Panel
.....................................
18
Remote Control
..................................
19
On-screen Display Menus
................
24
How to operate
.................................
24
Menu Tree
..........................................
25
IMAGE
...............................................
27
IMAGE | Advanced
............................
29
DISPLAY
............................................
31
DISPLAY | 3D
...................................
34
SETUP
...............................................
35
SETUP | Signal (RGB)
.......................
38
SETUP | Security
...............................
39
SETUP | Advanced
............................
41
SETUP | Network
...............................
42
OPTIONS
...........................................
45
OPTIONS | Advanced
........................
46
OPTIONS | Lamp Settings
.................
47
Appendices
....................................
48
Troubleshooting
................................
48
Replacing the lamp
...........................
53
Compatibility Modes
.........................
55
Computer Compatibility
.....................
55
Video Compatibility
............................
56
RS232 Commands and Protocol
Function List
.....................................
57
RS232 Pin Assignments
....................
57
RS232 Protocol Function List
............
58
Ceiling Mount Installation
..................
62
Optoma Global Offices
.....................
63
Regulation & Safety Notices
.............
65
Table of Contents