Optoma GT1080HDR EH412ST User Manual

Optoma GT1080HDR Manual

Optoma GT1080HDR manual content summary:

  • Optoma GT1080HDR | EH412ST User Manual - Page 1
    DLP® Projector User manual
  • Optoma GT1080HDR | EH412ST User Manual - Page 2
    the projector image...17 USING THE PROJECTOR 20 Powering on / off the projector 20 Selecting an input source...21 Menu navigation and features 22 OSD Menu tree...23 Display image settings menu...31 Display 3D menu...33 Display aspect ratio menu...34 Display edge mask menu...35 Display zoom menu
  • Optoma GT1080HDR | EH412ST User Manual - Page 3
    44 Compatible resolutions...44 Image size and projection distance 46 Projector dimensions and ceiling mount installation 47 IR remote control 1 codes...48 IR remote control 2 codes...50 Troubleshooting...52 Warning indicators...54 Specifications...56 Optoma global offices...57 English 3
  • Optoma GT1080HDR | EH412ST User Manual - Page 4
    servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction . ±± In direct sunlight. ‡‡ Do not use the projector in places where flammable gases or explosives gases may
  • Optoma GT1080HDR | EH412ST User Manual - Page 5
    Optoma before you send the unit for repair. ‡‡ See projector enclosure for safety related markings. ‡‡ The unit should only be repaired by appropriate service personnel. ‡‡ Only use 3D Safety Information Please follow all warnings and precautions as recommended before you or your child use the 3D
  • Optoma GT1080HDR | EH412ST User Manual - Page 6
    of this device and do not resume using it for at least thirty minutes after the symptoms have subsided. ‡‡ Watching 3D projection while sitting too close to the screen for an extended period of time may damage your eyesight. The ideal viewing distance should be at least three times the screen height
  • Optoma GT1080HDR | EH412ST User Manual - Page 7
    computing devices must be made using shielded cables to maintain compliance the Federal Communications Commission, to operate this projector. Operation Conditions This device complies with if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when
  • Optoma GT1080HDR | EH412ST User Manual - Page 8
    Brightness Contrast User3 Mode Aspect ratio Keystone Mute DB 3D Sleep Timer Volume Source Re-sync Menu Volume HDMI1 HDMI2 VGA1 VGA2 Video YPbPr  CD User Manual *(2)  Warranty Card *(3)  Basic User Manual Projector Remote control *(1) Power lead Documentation Note The remote
  • Optoma GT1080HDR | EH412ST User Manual - Page 9
    INTRODUCTION Product Overview 1 2 3 5 4 7 8 6 9 12 11 10 5 Note: Keep a minimum distance of 20 cm between the "inlet" and "outlet" labels. No Item 1. Lens 2. IR Receiver 3. Keypad 4. Lens Cap 5. Tilt-Adjustment Foot 6. Ventilation (inlet) No Item 7. Focus
  • Optoma GT1080HDR | EH412ST User Manual - Page 10
    v2.2 4K 30HZ compatible USB POWER OUT (5V 1.5A) COMPATIBLE Full 3D VGA IN VGA OUT RS232 6 7 AUDIO OUT AUDIO IN 10 9 Out (5V 1.5A) 3. Connector / MOUSE / SERVICE Connector 4. VGA IN Connector 5. VGA OUT Connector connection errors, we recommend the use of High Speed or Premium Certified
  • Optoma GT1080HDR | EH412ST User Manual - Page 11
    INTRODUCTION Keypad 1 2 3 9 12 4 11 5 6 10 No Item 1. On/Standby LED 2. Lamp LED 3. Temp LED 4. Information 5. Re-Sync 6. Four Directional Select Keys 9 8 7 No Item 7. IR Receiver 8. Enter 9. Keystone Correction 10. Menu 11. Source 12 Power English 11
  • Optoma GT1080HDR | EH412ST User Manual - Page 12
    6. Mute 7. DB (Dynamic Black) 8. Source 9. Enter 10. Menu 11. HDMI1 12. VGA1 13. VGA2 (not supported) 14. Power Off No Item 15. User 3 16. Contrast 17. Display Mode 18. Aspect Ratio 19. 3D Menu On / Off 20. Sleep Timer 21. Volume + 22. Re-Sync 23. Four Directional Select Keys 24
  • Optoma GT1080HDR | EH412ST User Manual - Page 13
    16. Mouse On / Off 17. Mute 18. Mouse Right Click 19. Four Directional Select Keys 20. Page + 21. Volume - / + 22. 3D Menu On / Off 23. VGA 24. Video (not supported) 25. User 3 26. Numeric Keypad (0-9) 27. Resync The actual remote control may vary depending on the region. Some keys may
  • Optoma GT1080HDR | EH412ST User Manual - Page 14
    , the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Table mount front Ceiling mount front Table mount rear Ceiling mount rear Projector should be placed flat on a surface and 90 degrees / perpendicular to the
  • Optoma GT1080HDR | EH412ST User Manual - Page 15
    in a horizontal position. The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically, and may lead to other unpredictable damages. 15° -15° ‡‡ Allow
  • Optoma GT1080HDR | EH412ST User Manual - Page 16
    SETUP AND INSTALLATION Connecting sources to the projector 2 3 1 4 5 HDMI v2.0 HDCP v2.2 4K 60HZ compatible HDMI 2 MHL v1.4 HDCP v2.2 4K 30HZ compatible USB POWER OUT (5V 1.5A) COMPATIBLE Full 3D 11 VGA IN VGA OUT RS232 MOLEX 10 AUDIO OUT AUDIO IN 98 7 6 12 MOLEX No Item 1. HDMI
  • Optoma GT1080HDR | EH412ST User Manual - Page 17
    or counterclockwise to raise or lower the projector. Tilt-Adjustment Feet Tilt-Adjustment Ring Focus To adjust the focus, turn the focus lever clockwise or counterclockwise until the image is sharp and legible. Focus Lever Note: The projector will focus at a distance of 1m to 10m. English 17
  • Optoma GT1080HDR | EH412ST User Manual - Page 18
    cover on remote control. Note: Replace only with the same or equivalent type batteries. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. ‡‡ Do not mix batteries of different types. Different types of batteries have different
  • Optoma GT1080HDR | EH412ST User Manual - Page 19
    the projector are within a very short distance, the remote control might become ineffective. ‡‡ When you aim at the screen, the effective distance is projector. However, the effective range might change according to screens. Approx. ± 15° English 19 Source Re-sync Volume Mute Sleep Timer DB 3D
  • Optoma GT1080HDR | EH412ST User Manual - Page 20
    USING THE PROJECTOR Powering on / off the projector or ON OFF User1 User2 Brightness Contrast User3 Mode Aspect ratio Keystone Mute DB 3D Sleep Timer Source ON OFF Volume User1 User2 Brightness Contrast User3 Mode Aspect ratio Keystone Mute DB 3D Sleep Timer Re-sync
  • Optoma GT1080HDR | EH412ST User Manual - Page 21
    USING THE PROJECTOR User1 User2 User3 Contrast Brightness Mode Selecting an input source Aspect ratio Turn on the connected source that you want to display on the screenK,esysutocnhe as computer, notebook, video player, etc. The projector DB 3D Sleep Timer Volume Source Re-sync Menu
  • Optoma GT1080HDR | EH412ST User Manual - Page 22
    key to view further settings. Adjust the settings by using keys. 4. Select the next item to be adjusted projector will automatically save the new settings. Sub Menu Settings Display Main Menu Image Settings 3D Aspect Ratio Edge Mask Zoom Image Shift Keystone Select Exit Navigation guide
  • Optoma GT1080HDR | EH412ST User Manual - Page 23
    USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Display Temperature Sub Menu 4 Values Cinema Film HDR HDR SIM. Vivid Game Reference Bright User 3D ISF Day ISF Night ISF 3D Off [Default] Blackboard Light Yellow Light Green Light Blue Pink Gray Off Auto [Default]
  • Optoma GT1080HDR | EH412ST User Manual - Page 24
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Color Display Color Matching Hue Saturation Gain Reset Color Settings RGB Gain/Bias Exit Red
  • Optoma GT1080HDR | EH412ST User Manual - Page 25
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Brightness Image Settings Mode Reset 3D Mode 3D Tech. 3D  2D 3D Display 3D Format 3D Sync Invert Reset Aspect Ratio Audio Edge Mask Zoom H Image Shift V Keystone Mute Volume HDMI1 Audio Input HDMI2/MHL VGA Sub Menu 4
  • Optoma GT1080HDR | EH412ST User Manual - Page 26
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 (Standby) USB Power Security Security Security Timer Change Password Month Day Hour Values Front [Default] Rear Ceiling-top Rear-top Off On [Default] Cancel [Default] Yes (Read only) Yes No Off 300hr
  • Optoma GT1080HDR | EH412ST User Manual - Page 27
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 HDMI Link Sub Menu 3 HDMI Pattern Brightness Contrast Sleep Timer Color Matching Color Temp Gamma Projection Lamp Settings Zoom Freeze MHL HDMI 2 Test Pattern Brightness Contrast Sleep Timer Color Matching Color Temp Gamma Projection Lamp
  • Optoma GT1080HDR | EH412ST User Manual - Page 28
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Remote Settings [depends on remote] User3 Projector ID Setup Options Language Sub Menu 4 Values HDMI 2 Test Pattern Brightness Contrast Sleep Timer Color Matching Color Temp Gamma Projection Lamp Settings Zoom Freeze MHL 00~99
  • Optoma GT1080HDR | EH412ST User Manual - Page 29
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Menu Settings Menu Location Setup Options Menu Timer Auto Source Input Source HDMI1 Input Name HDMI2/MHL
  • Optoma GT1080HDR | EH412ST User Manual - Page 30
    USING THE PROJECTOR Main Menu Info Sub Menu Sub Menu 2 Regulatory Serial Number Source Resolution Refresh Rate Display Mode Power Mode (Standby) Lamp Hours Brightness Mode FW Version
  • Optoma GT1080HDR | EH412ST User Manual - Page 31
    3D mode to be perfectly calibrated and high picture quality. Note: For access and calibration of ISF daytime and night viewing modes, please contact your local dealer. Wall Color Use do not support Dynamic Range.  HDR ‡‡ Off: Turn off HDR Processing. When set to Off, the projector will NOT decode
  • Optoma GT1080HDR | EH412ST User Manual - Page 32
    USING THE PROJECTOR  HDR Picture Mode ‡‡ Bright: Choose this mode for brighter more saturated colors. ‡‡ Standard: Choose this mode for natural looking colors with a balance of warm and
  • Optoma GT1080HDR | EH412ST User Manual - Page 33
    option to disable or enable the 3D function. ‡‡ Off: Select "Off" to turn off 3D mode. ‡‡ On: Select "On" to turn on 3D mode. 3D Tech. Use this option to select 3D technology. ‡‡ DLP-Link: Select to use optimized settings for DLP 3D Glasses. ‡‡ 3D Sync: Select to use optimized settings for IR, RF or
  • Optoma GT1080HDR | EH412ST User Manual - Page 34
    USING THE PROJECTOR 3D → 2D Use this option to specify how the 3D content should appear on the screen. ‡‡ 3D: Display 3D signal. ‡‡ L (Left): Display the left frame of 3D content. ‡‡ R (Right): Display the right frame of 3D content. Note: When changing the input source from 3D to 2D, make sure the
  • Optoma GT1080HDR | EH412ST User Manual - Page 35
    USING THE PROJECTOR Display edge mask menu Edge Mask Use this function to remove the video encoding noise on the edge of video source. Display zoom menu Zoom Use to reduce or magnify an image on the projection screen. Display image shift menu Image Shift Adjust the projected image position
  • Optoma GT1080HDR | EH412ST User Manual - Page 36
    USING THE PROJECTOR Setup menu Setup projection menu Projection Select the preferred projection between front, rear, ceiling-top, and rear-top. the "Signal Power On" option is turned "On", the power consumption of the projector in standby mode will be over 3W. Auto Power Off (min.) Sets the
  • Optoma GT1080HDR | EH412ST User Manual - Page 37
    Security Enable this function to prompt for a password before using the projector. ‡‡ Off: Choose "Off" to be able to switch on the projector without password verification. ‡‡ On: Choose "On" to use security verification when the turning on the projector. Security Timer Can be select the time (Month
  • Optoma GT1080HDR | EH412ST User Manual - Page 38
    link settings menu Note: ‡‡ When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI Link control feature in the projector's OSD. This lets one device or multiple devices in a group power on or
  • Optoma GT1080HDR | EH412ST User Manual - Page 39
    ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command. Setup options menu Language Select the multilingual OSD menu between English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Swedish, Norwegian/Danish, Finnish
  • Optoma GT1080HDR | EH412ST User Manual - Page 40
    USING THE PROJECTOR Setup reset menu Reset OSD Return the factory default settings for OSD menu settings. Reset to Default Return the factory default settings for Setup menu settings. Info menu Info menu View the projector information as listed below: ‡‡ Regulatory ‡‡ Serial Number ‡‡ Source ‡‡
  • Optoma GT1080HDR | EH412ST User Manual - Page 41
    or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is recommended to wear safety glasses if changing the bulb
  • Optoma GT1080HDR | EH412ST User Manual - Page 42
    projector by pressing the " " button on the remote control or the projector keypad. 2. Allow the projector module, reverse the previous steps. 11. Turn on the projector and reset the lamp timer. 12. Lamp Reset: projector cannot be turned on if the lamp cover has not been placed back on the projector
  • Optoma GT1080HDR | EH412ST User Manual - Page 43
    the dust filter every three months. Clean it more often if the projector is used in a dusty environment. Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Disconnect the power cord. 3. Remove the dust filter carefully
  • Optoma GT1080HDR | EH412ST User Manual - Page 44
    ADDITIONAL INFORMATION Compatible resolutions HDMI1.4 for HDMI 2 B0/Established Timing 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 832 x 624 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024
  • Optoma GT1080HDR | EH412ST User Manual - Page 45
    mode is on Top-and-Bottom TAB mode is on HQFS 3D format is Frame sequential Note: ‡‡ If 3D input is 1080p@24Hz, the DMD should replay with integral multiple with 3D mode. ‡‡ Support NVIDIA 3DTV Play if there is no patent fee from Optoma. ‡‡ 1080i@25Hz and 720p@50Hz will run in 100Hz; 1080p
  • Optoma GT1080HDR | EH412ST User Manual - Page 46
    ADDITIONAL INFORMATION Image size and projection distance Diagonal Length Size of (16:9) Screen 68.6 73.5 78.4 83.3 88.2 93.1 98.1 103 107.9 112.8 117.7 122.6 127.5 132.4 137.3 142.2 147.1 Projection Distance ( D ) Wide Tele (m) 0.41 0.44 0.55 0.66 0.77 0.88 0.99 1.10 1.22 1.33 1.44 1.55 1.66
  • Optoma GT1080HDR | EH412ST User Manual - Page 47
    ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following
  • Optoma GT1080HDR | EH412ST User Manual - Page 48
    Select a display mode for optimized settings 05 Mode for different applications. Please see page 31. 07 Keystone Adjust image distortion caused by tilting the projector. 64 Aspect ratio Press to change aspect ratio of a displayed image. 89 3D Manually select a 3D mode that matches your
  • Optoma GT1080HDR | EH412ST User Manual - Page 49
    11 10 12 14 Printing-key definition Description Volume Adjust to increase volume. Use or ▼ to select items or make adjustments to your selection. 18 Confirm your item selection. 04 Re-sync Automatically synchronizes the projector to the input source. 0C Volume - Adjust to decrease
  • Optoma GT1080HDR | EH412ST User Manual - Page 50
    HDMI 7 User1 Source 2 Menu 5 VGA 8 User2 0 3 3D 6 Video 9 User3 Resync Key Power Switch Display blank / projector image. Press to momentarily turn off / on the audio. L R Up arrow Left arrow Right arrow Down arrow Enter Enter Page- Use as mouse left click. Use as mouse right click. Use
  • Optoma GT1080HDR | EH412ST User Manual - Page 51
    as numeric keypad number "1". ‡‡ Press to display or exit the on-screen display menus Menu/2 for projector. ‡‡ Use as numeric keypad number "2". 3D/3 ‡‡ Press to manually select a 3D mode that matches your 3D content. ‡‡ Use as numeric keypad number "3". ‡‡ Press to choose HDMI source. HDMI
  • Optoma GT1080HDR | EH412ST User Manual - Page 52
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen ‡‡ Ensure all the cables and power connections
  • Optoma GT1080HDR | EH412ST User Manual - Page 53
    When the input signal is HDMI 1.3 2D (1080i side-by-side half), press "3D" button and switch to "Side by Side". Other problems T he projector stops responding to all controls ‡‡ If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power
  • Optoma GT1080HDR | EH412ST User Manual - Page 54
    red and if "On/Standby" indicator flashes red. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) Power on
  • Optoma GT1080HDR | EH412ST User Manual - Page 55
    the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. ‡‡ Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact a service center for repair. ‡‡ Out of display range: HDMI Out
  • Optoma GT1080HDR | EH412ST User Manual - Page 56
    distance Description 1080p 3840 x 2160 (60Hz) Manual service 1073.4 Million color - Horizontal scan rate: 15.375~91.146 KHz - Vertical scan rate: 50~ 85 Hz (120Hz for 3D feature projector Dimensions Weight Environmental conditions Description Front, Rear, Ceiling - Top, Rear - Top - 316 mm
  • Optoma GT1080HDR | EH412ST User Manual - Page 57
    ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA 47697 Westinghouse Drive, Fremont, CA 94539, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com
  • Optoma GT1080HDR | EH412ST User Manual - Page 58
    www.optoma.com *36.7FN01G001-A* P/N:36.7FN01G001-A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

User manual
DLP
®
Projector