Optoma HD131Xe User Manual
Optoma HD131Xe Manual
 |
View all Optoma HD131Xe manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma HD131Xe manual content summary:
- Optoma HD131Xe | User Manual - Page 1
Problems 53 Other Problems 55 Remote Control Problems 55 LED Lighting Messages 56 On Screen Messages 57 Replacing the Lamp 58 Compatibility Modes 60 RS232 Commands and Protocol Function List 62 RS232 Pin Assignments 62 RS232 Protocol Function List 63 Ceiling Mount Installation 67 Optoma - Optoma HD131Xe | User Manual - Page 2
to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma HD131Xe | User Manual - Page 3
on-screen display "OPTIONS | Lamp Settings" menu after replacing the lamp module. When switching the projector off, please ensure the cooling cycle has been completed before disconnecting power. Allow 90 seconds for the projector to cool down. Do not use lens cap when projector is in operation. When - Optoma HD131Xe | User Manual - Page 4
when exposed to certain flashing images or lights contained in certain Projector pictures or video games. If you suffer from, or have a family history of epilepsy or strokes, please consult with a medical specialist before using the 3D function. ™™ Even those without a personal or family history of - Optoma HD131Xe | User Manual - Page 5
strain and decreased postural stability. It is recommended that users take frequent breaks to lessen the potential of these distance should be at least three times the screen height. It is recommended that the viewer's eyes are level with the screen. ™™ Watching 3D projection while wearing 3D glasses - Optoma HD131Xe | User Manual - Page 6
beam at all times. Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. English 6 - Optoma HD131Xe | User Manual - Page 7
the box contents to ensure all parts listed below are in the box. If something is missing, please contact Optoma customer service. POWER SOURCE Projector with lens cap Power Cord ™™ Due to different applications in each Country, some regions may have different accessories. 2 × AAA Batteries - Optoma HD131Xe | User Manual - Page 8
(Y5NVC) AU(VDIDIOE2O-I)N AOUUDTIO specifications. ™™ Do not block projector in/out air 11 vents. 10 9 8 English 8 1. Ventilation (outlet) 2. Ventilation (inlet) 3. Focus Ring 4. Zoom Ring 5. IR Receivers 6. Control Panel 7. Lens 8. Tilt-Adjustment Feet 9. Security Bar 10. Input / Output - Optoma HD131Xe | User Manual - Page 9
Introduction Control Panel 1 2 12 3 45 6 ? POWER 7 8 9 10 11 1. Help 2. Menu 3. Source 4. Enter 5. Re-Sync 6. Power 7. Keystone Correction 8. Four Directional Select Keys 9. On/Standby LED 10. Lamp LED 11. Temp LED 12. IR Receiver 9 English - Optoma HD131Xe | User Manual - Page 10
VGA-IN/YPbPr/ MOUSE/ SERVICE HDMI 1 HDMI 2 AUDIO1-IN (VGA) 3D SYNC Out(5V) RS-232C AUDIO OUT AUDIO2-IN (VIDEO) 9 10 11 12 13 1. USB for remote mouse function and firmware upgrade 2. HDMI 1 Connector (v1.4a 3D supported) 3. HDMI 2 Connector (v1.4a 3D supported) 4. Composite Video Input - Optoma HD131Xe | User Manual - Page 11
is subject to model's specifications. Type A 1 23 22 21 20 19 18 17 16 15 14 13 1. Power On 2. Power Off 2 3. 16:9 4. Native 3 5. Gamma 6. 3D format 4 7. Vol+/8. Enter 5 9. Re-Sync 10. VGA1 Source 6 11. Video Source 12. HDMI2 Source 7 13. VGA2 Source 8 14. HDMI1 Source 9 15. Menu 16 - Optoma HD131Xe | User Manual - Page 12
Right Click 10. Display Mode 12 11. Page Up 13 12. Volume +/13. Menu 14 14. Zoom 15 15. AV mute 16 16. Video 17. 3D 17 18. VGA1 18 19. Page Down 20. Keystone +/- 27 21. Brightness 22. HDMI1 23. HDMI2 24. Dynamic Black 25. Numbered keypad (for password input - Optoma HD131Xe | User Manual - Page 13
Installation Connecting the Projector Connect to Computer/Notebook 1 ™™ Due to the difference in applications for each country, some regions may have different accessories. ™™ (*) Optional accessory E62405SP R MOLEX 23 4 3D Glasses 5 molex VIDEO VGA-IN/YPbPr/ MOUSE/ SERVICE HDMI 1 HDMI - Optoma HD131Xe | User Manual - Page 14
. VIDEO VGA-IN/YPbPr/ MOUSE/ SERVICE HDMI 1 HDMI 2 AUDIO1-IN (VGA) 3D SYNC Out(5V) RS-232C AUDIO OUT AUDIO2-IN (VIDEO) R ™™ For more detailed E62405SP information about connecting to the 3D emitter and 3D glasses, please refer to their user's guides. Composite Video Output 11 - Optoma HD131Xe | User Manual - Page 15
3D video source and your 3D projector. PlayStation® 3 Games yy Make sure that you have updated your console to the latest software ver- sion. yy Go to the "Settings menu -> Display settings -> Video output -> HDMI". Select "Automatic" and follow the on-screen instructions. yy Insert your 3D game - Optoma HD131Xe | User Manual - Page 16
Installation 3D Broadcast 3D Blu-ray™ Disc 3D Console Games SKY+HD, cable/satellite box 3D Blu-ray™ Player PlayStation® 3 POWER SOURCE 3D Glasses Full 3D 1080p DLP® Projector English 16 - Optoma HD131Xe | User Manual - Page 17
information, please refer to 3D glasses user's guide. Using the 3D glasses 1. To turn ON 3D glasses: Press the "Power" button and the LED will flash one time indicating the glasses are ready to use 3D mode. 2. Verify that 3D content is being sent to the projector and signal is compatible with - Optoma HD131Xe | User Manual - Page 18
(Standby) is set to Eco ( - Optoma HD131Xe | User Manual - Page 19
Press the " " button again to confirm otherwise the message will disappear after 15 seconds. When you press the " " button for the second time, the projector will display countdown timer and will shut down. 2. The cooling fans continue to operate for about 10 seconds for cooling cycle and the ON - Optoma HD131Xe | User Manual - Page 20
Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: ™™ Contact the nearest service center if the projector displays these symptoms. See pages 68-69 for more information. "LAMP" LED indicator is lit red and if "On/Standby" indicator - Optoma HD131Xe | User Manual - Page 21
for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring - Optoma HD131Xe | User Manual - Page 22
You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 4.92 to 32.80 feet (1.5 to 10.0 meters). Zoom Ring Focus Ring Adjusting Projection Image Size Projection Image Size from 37.6" to 301 - Optoma HD131Xe | User Manual - Page 23
87 130.7 73.6 3.98 2.24 156.7 88.2 5.53 3.11 217.7 122.4 6.67 3.75 262.4 147.6 Projection Distance (D) (m) (feet) wide tele wide tele - 1.5 - 4.92 1.3 1.6 4.36 5.22 2.0 2.4 6.53 7.84 0.36 1.18 0.50 1.63 0.60 1.97 This table is for user's reference only. 23 English - Optoma HD131Xe | User Manual - Page 24
Four Directional Select Keys Keystone Lamp LED Use to select items or make adjust- ments to your selection. Use to adjust image distortion caused by tilting the projector. (±40 degrees) Indicate the projector's lamp status. Temp LED Indicate the projector's temperature status. ON/STANDBY - Optoma HD131Xe | User Manual - Page 25
the "Power On" section on page 18. Power Off Lamp Mode Mode 4:3 16:9 Refer to the "Power On/Off the Projector" section on page 19. Increase/Decrease the luminance of the image. (refer to page 51) Select a display mode for optimised settings for different applications. (refer to page 35) Scale the - Optoma HD131Xe | User Manual - Page 26
User Controls Type A Using the Remote Control Enter Confirm your item selection. Source Re-sync Menu HDMI1 HDMI2 VGA1 VGA2 Video Four Directional Select Keys Press "Source" to select an input signal. Automatically synchronizes the projector to the input source. Display or exit the on-screen - Optoma HD131Xe | User Manual - Page 27
Type B/C User Controls Remote Control Using the Remote Control Power Refer to the "Power On/Off the Projector" section on projector. Adjust to increase / decrease the volume. Adjust the brightness of the image. Automatically adjusts the picture brightness to give optimum contrast performance - Optoma HD131Xe | User Manual - Page 28
turn on the mouse function. For the mouse function to work, USB cable must be connected between the projector and computer. Mode Select the display mode from Cinema, Bright, Photo, Reference, 3D and User. (refer to page 35) Zoom 3D Zoom in on an image. Press ◄► buttons to alter zoom. Press the - Optoma HD131Xe | User Manual - Page 29
? POWER User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the control panel to open the Help Menu. ? 29 English - Optoma HD131Xe | User Manual - Page 30
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 53-55 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 30 - Optoma HD131Xe | User Manual - Page 31
User Controls 31 English - Optoma HD131Xe | User Manual - Page 32
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector and then press ► or "Enter" key to view further settings. Adjust the settings by ◄► key. 4. Select the next item to be - Optoma HD131Xe | User Manual - Page 33
User Controls Menu Tree Main Menu Image Sub Menu Display Mode Brightness Contrast Sharpness #1 Color #1 Tint Advanced Display Reset Format Edge Mask Zoom Image Shift V Keystone 3D Setup Language Projection Menu Location Settings Noise Reduction Gamma BrilliantColor™ Dynamic Black Color - Optoma HD131Xe | User Manual - Page 34
User Controls Main Menu Setup Options Sub Menu Audio Settings Security Projector ID Advanced Input Source Source Lock High Altitude Information Hide Keypad Lock Test Pattern IR Function Background Color Lamp Settings Advanced Reset Settings Internal Speaker Mute Volume Audio Input Security - Optoma HD131Xe | User Manual - Page 35
the way the movie director intended. Color, color temperature, brightness, contrast and gamma settings are all configured to standard reference levels. `` User: User's settings. `` 3D: Recommended setting for 3D mode enabled. Any further adjustments by the user in 3D will be saved in this mode for - Optoma HD131Xe | User Manual - Page 36
User Controls ™™ "Color" and "Tint" are only supported for composite and component sources. Color Adjust a video image from black and white to fully saturated color. `` Press the ◄ to decrease the color saturation in the image. `` Press the ► to increase the color saturation in the image. Tint - Optoma HD131Xe | User Manual - Page 37
BrilliantColor™ Dynamic Black Low Color Temp. Medium Color Settings Noise Reduction The Noise Reduction reduces the amount of visible noise interlaced signals. The range is from "0" to "10". (0: Off) Gamma This allows you to set up gamma curve type. After the initial setup and fine tuning is - Optoma HD131Xe | User Manual - Page 38
User Controls Color Settings Press ► into the next menu and then use ▲ or ▼ or ◄ or ►to select item. Color Settings Red Cyan Green Magenta Blue Yellow White Reset Exit `` Red/Green/Blue/Cyan/Magenta/Yellow: Use ◄ or ► to select Hue, Saturation and Gain Colors. Red Hue Saturation Gain - Optoma HD131Xe | User Manual - Page 39
"Signal" is only supported in Analog VGA (RGB) signal. Exit Automatic Automatically configures the signal (the Frequency and Phase items are grayed out). If Automatic is disabled, the Frequency and Phase items will appear for user to manually tune and save the settings. Phase Synchronize the signal - Optoma HD131Xe | User Manual - Page 40
supported when the source is HDMI. White Level Allow user adjust White Level when inputting Video signals. Black Level Allow user adjust saturated color. `` Press the ◄ to decrease the amount of color in the image. `` Press the ► to increase the amount of color in the image. Hue Adjust the color - Optoma HD131Xe | User Manual - Page 41
you use an external anamorphic lens, this LBX mode also allows you to watch a 2.35:1 content (include Anamorphic DVD and HDTV film source) that support anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Lamp power and vertical resolution are - Optoma HD131Xe | User Manual - Page 42
User Controls ™™ Each I/O has different setting of "Edge Mask". ™™ "Edge Mask" and "Zoom" can't work at same time. 16:9 Screen 4:3 16:9 LBX Native Auto Superwide 480i/p 576i/p 1080i/p 720p PC 1440 x - Optoma HD131Xe | User Manual - Page 43
User Controls DISPLAY | 3D 3D Mode 3D -> 2D 3D Format 3D Sync. Invert DISPLAY 3D DLP - Link 3D AUTO Off Exit 3D Mode `` DLP-Link: Select "DLP-Link" to use optimized settings for DLP Link 3D Glasses. (refer to page 17). ™™ "3D sync. Invert" function wouldn't save the `` VESA 3D: Select "VESA - Optoma HD131Xe | User Manual - Page 44
Menu Location Audio Settings Security Projector ID SETUP English Language Choose the multilingual OSD menu. Press ► into the sub menu and then use the ▲ or ▼ or ◄ or ► key to select your preferred language. Press "Enter" to finalize the selection. Language ™™ Rear-Desktop and Rear-Ceiling are to - Optoma HD131Xe | User Manual - Page 45
User Controls Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Refer to pages 63-66 for the complete list of RS232 commands. 45 English - Optoma HD131Xe | User Manual - Page 46
User Controls SETUP | Audio Settings SETUP Audio Settings Internal Speaker Mute Volume Audio Input Off Off Default to other image sources. The default audio inputs are on the back panel of the projector. Use this option to reassign any of the Audio Inputs to the current image source. `` Audio1 - Optoma HD131Xe | User Manual - Page 47
User Controls SETUP Security SETUP | Security Security Off Security Timer Change Password Exit ™™ Pass-code default value is "1234" (first time). Enter Current Security Code (4 digits) Security `` On: Choose "On" to use security verification when the turning on the projector. `` Off: - Optoma HD131Xe | User Manual - Page 48
. Logo Capture (1080p:1920x1080). Press ► to capture an image of the picture currently displayed on screen. Closed Captioning ™™ "Wireless" is onlyfunctional with VGA connector. ™™ Wired VGA will not function and the projector may shut down if Wireless is Use this function to set the desired - Optoma HD131Xe | User Manual - Page 49
User Controls OPTIONS OPTIONS Input Source Source Lock Off High Altitude Off a test pattern. There are Grid, White pattern and None. IR Function When this function is "ON" , the projector can be operated by the remote control from IR receiver. By selecting "Off", you will be able to use the - Optoma HD131Xe | User Manual - Page 50
User Controls Background Color Use this feature to display a "Black", "Red", "Blue", "Green" or "White", screen when no signal is available. Reset `` Current: Choose "Yes" to return the display parameters on this menu to the factory default settings. `` All: Choose "Yes" to return the display - Optoma HD131Xe | User Manual - Page 51
User Controls OPTIONS | Lamp Settings Lamp Hours OPTIONS Lamp Settings Lamp Reminder Lamp Mode Lamp Reset On Bright Exit ™™ When ambient temperature is over 40°C in operat- ing, the projector will switch to Eco automatically. ™™ "Lamp Mode" can be indipendently set for 2D and 3D. Lamp Hours - Optoma HD131Xe | User Manual - Page 52
User Controls OPTIONS | Advanced Direct Power On OPTIONS Advanced Auto Power Off (min) Sleep Timer (min) Power Mode (Standby) On Active Exit ™™ When Power mode (Standby) is set to Eco ( - Optoma HD131Xe | User Manual - Page 53
refer to the "Replacing the Lamp" section. `` Make sure you have removed the lens cap and the projector is switched on. `` Ensure that the "AV mute" feature is not turned on. Image is out of focus `` Make sure the Lens cap is removed. `` Adjust the Focus Ring on the projector lens. `` Make sure - Optoma HD131Xe | User Manual - Page 54
by trying to control the projector with the remote control. B lurry double image `` Press "3D Format" button and switch to 3D `` Check if the battery of 3D glasses is drained. `` Check if the 3D glasses is turned on. `` When the input signal is HDMI 1.3 2D (1080i side-by-side half), press "3D - Optoma HD131Xe | User Manual - Page 55
reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section. Remote Control Problems If the remote control does - Optoma HD131Xe | User Manual - Page 56
cord) Power on (Warming) ON/STANDBY LED (Green/Amber) Amber Flashing Green Temp-LED (Red) Lamp-LED (Red) Lamp lighting Green Power off (Cooling) Error (Over Temp.) Error (Fan fail) Error (Lamp fail) Flashing Green Flashing Amber Flashing Amber Flashing Amber Flashing ＊ ON/STANDBY LED be ON - Optoma HD131Xe | User Manual - Page 57
™™ Lamp warning: Lamp Warning Lamp life exceeded. ™™ Temperature warning: Warning! TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service - Optoma HD131Xe | User Manual - Page 58
or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp. English 58 Warning: If ceiling mounted, please use caution when opening the lamp access panel. It is recommended to wear safety glasses if - Optoma HD131Xe | User Manual - Page 59
slowly and carefully. 4 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and use "Lamp Reset" after the lamp module is replaced. Lamp Reset: (i) Press "Menu" (ii) Select "OPTIONS" (iii) Select "Lamp Settings" (iv) Select "Lamp Reset" (v) Select "Yes". 59 - Optoma HD131Xe | User Manual - Page 60
60 True 3D projector. SXGA 1280 x 1024 75 ™™ (*3) is not supported HDMI input singal 1280 x 1024 85 for Mac. SXGA+ 1400 x 1050 60 ™™ 120Hz input signals UXGA 1600 x1200 60 may be dependent 1920 x 1080 24 on graphics cards 1920 x 1080 30 support. HDTV (1080p) 1920 x 1080 - Optoma HD131Xe | User Manual - Page 61
Video Compatibility Input Resolution HDMI 1.4a 3D Input HDMI 1.3 3D Content 1280 x 720p @ 50Hz 1280 x 720p @ 60Hz 1280 x 720p @ 50Hz 1280 x 720p @ 60Hz 1920 x 1080i @ 50 Hz 1920 x 1080i @ 60 Hz 1920 x 1080p @ 24 Hz 1920 x 1080p @ 24 Hz 1920 x 1080i @ 50Hz 1920 x 1080i @ 60Hz 1280 x 720p @ 50Hz - Optoma HD131Xe | User Manual - Page 62
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments 9876 54321 Pin no. 1 2 3 4 5 6 7 8 9 Spec. (from projector side) N/A RXD TXD N/A GND N/A N/A N/A N/A English 62 - Optoma HD131Xe | User Manual - Page 63
Projector Return (Pass): P Projector Return (Pass): P Projector Return (Fail): F Projector Return (Fail): F XX=01ˀ99, projector's ID, XX=00 is for all projectors SEND to projector 3D ~XX20 5 7E 30 30 32 30 20 35 0D User 7E 30 30 32 34 20 a 0D Color Settings/White Red n = -50 (a=2D 35 - Optoma HD131Xe | User Manual - Page 64
30 34 34 20 a 0D Color (Saturation) n = -50 3D Mode DLP-Link ~XX230 3 7E 30 30 32 33 30 20 31 0D 3D Mode IR ~XX400 0 7E 30 30 34 30 30 20 30 0D 3Dĺ2D 3D Settings Enable ~XX78 0 7E 30 30 37 38 20 32 0D Disable(0/2 for backward compatible) ~XX79 n 7E 30 30 37 39 20 a 0D Projector - Optoma HD131Xe | User Manual - Page 65
32 20 32 0D User ~XX82 3 7E 30 20 31 0D Background Color Blue ~XX104 2 7E projector automatically 232 ASCII Code HEX Code Function Projector Return Description System status INFOn n : 0/1/2/3/4/6/7/8 = Standby/Warming/Cooling/Out of Range/ Lamp fail/Fan Lock/Over Temperature/Lamp - Optoma HD131Xe | User Manual - Page 66
Color Temperature OKn n : 0/1/2 = Warm/Medium/Cold ~XX129 1 7E 30 30 31 32 39 20 31 0D Projection Mode OKn n : 0/1/2/3 = Front-Desktop/Rear-Desktop/Front-Ceiling/Rear-Ceiling /3D/User ~XX151 1 7E 30 30 31 35 31 20 31 0D Model name OKn n:1=HD25e ~XX108 1 7E 30 30 31 30 38 20 31 0D Lamp - Optoma HD131Xe | User Manual - Page 67
damage to your projector, please use the Optoma ceiling mount. 1. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: `` Screw type: M3*3 `` Maximum screw length: 10mm `` Minimum screw length: 7.5mm - Optoma HD131Xe | User Manual - Page 68
service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada www.optoma.ca 888-289-6786 510-897-8601 services@optoma - Optoma HD131Xe | User Manual - Page 69
+49 (0) 211 506 6670 +49 (0) 211 506 66799 [email protected] +47 32 98 89 90 +47 32 98 89 99 [email protected] +82+2+34430004 +82+2+34430005 [email protected] www.os-worldwide.com +886-2-8911-8600 +886-2-8911-6550 [email protected] asia.optoma.com +852-2396-8968 +852-2370-1222 www - Optoma HD131Xe | User Manual - Page 70
of your projector. FCC in accordance with the instructions, may cause harmful interference turning the device off and on, the user is encouraged to try to correct the user's authority, which is granted by the Federal Communications Commission, to operate this projector Notice: Canadian users This Class - Optoma HD131Xe | User Manual - Page 71
including amendments) yy Low Voltage Directive 2006/95/EC yy R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle - Optoma HD131Xe | User Manual - Page 72
Appendices Trademarks • DLP is trademarks of Texas Instruments. • IBM is a trademark or registered trademark of International Licensing LLC. • Other product and company names mentioned in this user's manual may be the trademarks or registered trademarks of their respective holders. English 72
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
6
Introduction
......................................
7
Package Overview
..............................
7
Product Overview
...............................
8
Main Unit
..............................................
8
Control Panel
.......................................
9
Input/Output Connections
..................
10
Remote Control
..................................
11
Installation
.....................................
13
Connecting the Projector
..................
13
Connect to Computer/Notebook
........
13
Connect to Video Sources
.................
14
Connect to 3D Video Devices
...........
15
Using the 3D glasses
........................
17
Powering On/Off the Projector
..........
18
Powering On the Projector
.................
18
Powering Off the Projector
.................
19
Warning Indicator
...............................
20
Adjusting the Projected Image
..........
21
Adjusting the Projector’s Height
........
21
Adjusting the Projector’s Zoom /
Focus
.................................................
22
Adjusting Projection Image Size
........
22
User Controls
................................
24
Control Panel & Remote Control
......
24
Control Panel
.....................................
24
Remote Control
..................................
25
On-screen Display Menus
................
32
How to operate
..................................
32
Menu Tree
..........................................
33
IMAGE
...............................................
35
IMAGE | Advanced
............................
37
IMAGE | Advanced
| Signal (VGA) ... 39
IMAGE | Advanced | Signal (Video) ...40
DISPLAY
............................................
41
DISPLAY | 3D
...................................
43
SETUP
...............................................
44
SETUP | Audio Settings
.....................
46
SETUP | Security
...............................
47
SETUP | Advanced
............................
48
OPTIONS
...........................................
49
OPTIONS | Lamp Settings
.................
51
OPTIONS | Advanced
........................
52
Appendices
....................................
53
Troubleshooting
................................
53
Image Problems
.................................
53
Other Problems
..................................
55
Remote Control Problems
.................
55
LED Lighting Messages
.....................
56
On Screen Messages
........................
57
Replacing the Lamp
..........................
58
Compatibility Modes
.........................
60
RS232 Commands and Protocol
Function List
.....................................
62
RS232 Pin Assignments
....................
62
RS232 Protocol Function List
............
63
Ceiling Mount Installation
..................
67
Optoma Global Offices
.....................
68
Regulation & Safety Notices
.............
70
FCC Notice
........................................
70
Declaration of Conformity for EU
countries
............................................
71
Trademarks
.......................................
72
Table of Contents