Optoma HD25e User Manual - Page 54

Blurry double image, Two images, side-by-side format

Get Optoma HD25e PDF manuals and user guides View all Optoma HD25e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Appendices Image has slanted sides: `` If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. `` Use "Display-->V Keystone" from the OSD to make an adjust- ment. Image is reversed `` Select "Setup-->Projection" from the OSD and adjust the pro- jection direction. T he projector stops responding to all controls `` If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. `` Check that "Keypad Lock" is not activated by trying to control the projector with the remote control. B lurry double image `` Press "3D Format" button and switch to "Off" to avoid normal 2D image is blurry double image. T wo images, side-by-side format `` Press "3D Format" button and switch to "SBS" for input signal is HDMI 1.3 2D 1080i side-by-side. Image does not display in 3D `` Check if the battery of 3D glasses is drained. `` Check if the 3D glasses is turned on. `` When the input signal is HDMI 1.3 2D (1080i side-by-side half), press "3D Format" button and switch to "SBS". English 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
54
English
Appendices
Image has slanted sides:
If possible, reposition the projector so that it is centered on the
`
screen and below the bottom of the screen.
Use “Display-->V Keystone” from the OSD to make an adjust
-
`
ment.
Image is reversed
Select “Setup-->Projection” from the OSD and adjust the pro
-
`
jection direction.
The projector stops responding to all controls
If possible, turn off the projector, then unplug the power cord
`
and wait at least 60 seconds before reconnecting power.
Check that “Keypad Lock” is not activated by trying to control
`
the projector with the remote control.
Blurry double image
Press “3D Format” button and switch to “Off” to avoid normal
`
2D image is blurry double image.
Two images, side-by-side format
Press “3D Format” button and switch to “SBS” for input signal
`
is HDMI 1.3 2D 1080i side-by-side.
Image does not display in 3D
Check if the battery of 3D glasses is drained.
`
Check if the 3D glasses is turned on.
`
When the input signal is HDMI 1.3 2D (1080i side-by-side
`
half), press “3D Format” button and switch to “SBS”.