Optoma HD65 User's Manual

INSTALLATION INSTRUCTIONS

Model: CM-E73X

Compatible Models: Optoma EP731/732/732H/737/738/739/H30

READ THIS BEFORE YOU START

Maximum weight limit is 20 pounds (9.1 kg).

Do not exceed this limit.

Always use caution and care when working with

heavy projectors.

DO NOT TAKE UNNECESSARY RISKS!

Once you have chosen a location for the mount,

determine the construction of the ceiling.

•

Solid wood surface: a beam, or a wood joist

inside the wallboard.

•

Wallboard:

sheet

rock,

plasterboard

or

paneling.

•

Masonry: plaster, cement or brick.

It is recommended that the ceiling mount be

mounted to a ceiling beam or wood joist.

CAUTION: Use only the supplied TOGGLER®

TC® drywall/plasterboard anchors to support the

ceiling mount screws. Use them as anchors to

fasten the ceiling mount to sheet rock, plaster

board or paneling. Use the TOGGLER® Alligator®

anchor for solid wood or masonry. (See enclosed

TOGGLER® Anchoring Solutions brochure.)

Before installing the ceiling mount, make sure the

mounting location is sturdy enough to support the

projector. If you are not sure that your location will

hold the projector’s weight, contact a professional

contractor for advice.

Recommend maximum extension; do not exceed

15 inches if the base join is angled.

TOOLS REQUIRED

•

Hex wrench (included).

•

Phillips screwdriver

•

Drill with a 5/16” bit for the TC® anchors

•

Drill with a 1/4” bit for the AF6 Alligator® anchors.

•

Two crescent or 3/4" open-end wrenches.

__________________________________________________________________________

T.M.