Optoma TH1060P User's Manual - Page 14
Powering off the projector, Warning Indicator, If you wish to turn the projector back - remote
View all Optoma TH1060P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Powering off the projector 1. Press the " " button on the remote control or " " button on the panel of the projector to turn off the projector. First push of button will display the following message on the screen. Press the button again to confirm the shut down. If the button is not pressed, the message will disappear in 15 seconds. 2. The Power LED flashes green and the fans will speed up during shut down cooling cycle. The projector reaches stand-by mode as soon as the Power LED turns red. If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered standby mode. Once in standby mode, simply press " " button on the rear of the projector or " " on the remote control to restart the projector. 3. Disconnect the power cord from the electrical outlet and the projector only when the projector is in stand-by mode. Warning Indicator Noottee ▀■ When the Lamp LED indicator lights red, the projector will automatically shut itself down. Please contact your local reseller or service center. See pages 40. Contact the nearest ▀■ When the Temp LED is on a steady (not flashing) red, the service center if the projector will automatically shut itself down. Under normal projector displays these conditions, the projector can be switched on again after it symptoms. See page has cooled down. If the problem persists, you should contact 54 for more information. your local dealer or our service center. See pages 40. 14