Optoma TW675UST-3D User's Manual
Optoma TW675UST-3D Manual
 |
View all Optoma TW675UST-3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma TW675UST-3D manual content summary:
- Optoma TW675UST-3D | User's Manual - Page 1
operate 26 Menu Tree 27 IMAGE 30 IMAGE | Advanced 32 DISPLAY 34 DISPLAY | 3D 37 SETUP 38 SETUP | Signal (RGB 41 SETUP | Security 42 SETUP | Advanced the Card Reader 63 How to use the Optoma Presenter .... 66 Appendices 70 Troubleshooting 70 Replacing the lamp 76 Replacing and cleaning - Optoma TW675UST-3D | User's Manual - Page 2
to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send - Optoma TW675UST-3D | User's Manual - Page 3
as recommended in this user's guide. ▀■ Warning- Do not look the lamp, please allow the unit to cool down. Follow instructions as described on pages 76-77. ▀■ Warning- This will show on the screen. Please contact your local reseller or service center to change the lamp as soon under "Replacing as - Optoma TW675UST-3D | User's Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the - Optoma TW675UST-3D | User's Manual - Page 5
in VGA1-In/ SCART/YPbPr. ▀■ XGA (1024x768) Native resolution / WXGA (1280x800) Native resolution ▀■ HD compatible - 1080p supported ▀■ VGA monitor loop through (works on standby mode > 1W) ▀■ BrilliantColorTM Technology ▀■ Security Bar and Kensington Lock ▀■ RS232 control ▀■ Rapid shutdown ▀■ Built - Optoma TW675UST-3D | User's Manual - Page 6
in the box. If something is missing, please contact your nearest customer service center. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m have different accessories. 2 × AAA Batteries Documentation : User's Manual Warranty Card Quick Start Card WEEE Card (for EMEA only) - Optoma TW675UST-3D | User's Manual - Page 7
S-VIDEO VGA1-IN / SCART / YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr VGA-OUT HDMI PB/MOUSE SERVICE RJ-45 USB / DISPLAY 9 8 10 4 5 15 5 2 13 14 1. Control Panel 2. IR Receivers 3. Cable Cover 4. Speaker 5. Tilt-Adjustment Feet 6. Mirror Cover 7. Input - Optoma TW675UST-3D | User's Manual - Page 8
Introduction Control Panel 1 2 3 4 5 6 7 89 10 1. Lamp LED 2. Temp LED 3. Source 4. Re-Sync 5. Help 6. Power/Standby button and LED 7. Enter 8. Keystone Correction 9. Four Directional Select Keys 10. Menu English 8 - Optoma TW675UST-3D | User's Manual - Page 9
/ YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr 14 VGA-OUT HDMI PB/MOUSE SERVICE RJ-45 15 USB / 16 DISPLAY 17 Monitor loop through only support in VGA1-In/ SCART/YPbPr. 1. 12V Trigger Relay (12V, 250mA) 2. 3.5mm Mini Jack Audio1 Input for VGA1/VGA2 - Optoma TW675UST-3D | User's Manual - Page 10
21 22 23 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 24 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 3 8. Volume +/- 4 9. 3D 10. AV mute 5 11. Video 6 12. PC/Mouse control 7 13. Mouse Left Click 14. Enter/Help 8 15. Source 9 16. Keystone +/17. Menu 10 - Optoma TW675UST-3D | User's Manual - Page 11
Introduction Interactive Pen 1 3 2 4 5 6 The interactive pen is optional accessory. 1. Battery Cover 2. Mouse Right Click 3. Menu 4. Mouse Left Click 7 8 5. Lens 6. Nib 7. Power On/Off 8. LED Indicators 1 Warning: • Danger of explosion if battery is incorrectly replaced. • Replace only - Optoma TW675UST-3D | User's Manual - Page 12
Installation Connecting the Projector Removing and Attaching the Cable Cover Cable Cover 2 1 Procedure for Removing and Attaching the Cable Cover: 1. Unscrew the screw on the cable cover. 1 2. Lift up and remove the cable cover. 2 Install the cable cover by reversing the previous steps. English 12 - Optoma TW675UST-3D | User's Manual - Page 13
S-VIDEO VGA1-IN / SCART / YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr VGA-OUT HDMI PB/MOUSE SERVICE RJ-45 USB / DISPLAY R E62405SP 8 9 1...Power Cord 2 Audio Output Cable 3 Audio Input Cable 4 RS232 Cable 5...VGA Cable 6 HDMI Cable 7...*USB Cable - Optoma TW675UST-3D | User's Manual - Page 14
232 VIDEO S-VIDEO VGA1-IN / SCART / YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr VGA-OUT HDMI PB/MOUSE SERVICE RJ-45 USB / DISPLAY 9 R E62405SP 10 DVD Player, Set-top Box, HDTV receiver Due to the difference in applications for each country, some - Optoma TW675UST-3D | User's Manual - Page 15
Installation Powering the projector On / Off Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the POWER/STANDBY LED will turn Amber. 2. Turn on the lamp by pressing " " button either on the top of the projector or on the remote. The POWER/STANDBY - Optoma TW675UST-3D | User's Manual - Page 16
power off procedure. Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the nearest service center if the "LAMP" LED indicator is lit red and if "POWER/STANDBY" indicator flashes amber. projector displays these symptoms. See - Optoma TW675UST-3D | User's Manual - Page 17
Installation Adjusting the Projected Image Adjusting the Projector's Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector - Optoma TW675UST-3D | User's Manual - Page 18
FOCUS Installation Adjusting the Projector's Focus To focus the image, rotate the focus ring until the image is clear. XGA series: The projector will focus at distances from 1.58 to 2.17 feet (475 to 662 mm). WXGA series: The projector will focus at distances from 1.58 to 2.17 feet (495 to 661 - Optoma TW675UST-3D | User's Manual - Page 19
Installation Screen Center (W) Screen Diagonal B=>Vertical distance between lens center and screen center (H) C,E=>T hrow distance D=>V ertical distance between lens center and bottom of screen (top of screen for ceiling mount) α=>Throw angle (B) (D) Throw Angle (α) Lens Center (C) (E) - Optoma TW675UST-3D | User's Manual - Page 20
User Controls Control Panel & Remote Control Control Panel Using the Control Panel Power/ Standby button and LED Refer to the "Power On/Off the Projector" section on pages 15-16. Indicate the projector's status. RE-SYNC Enter SOURCE Menu Four Directional Select Keys Keystone HELP Lamp LED Temp - Optoma TW675UST-3D | User's Manual - Page 21
distortion caused by tilting the projector. Volume +/- Adjust to increase / decrease the volume. Brightness Adjust the brightness of the image. 3D Menu HDMI Press the "3D" to turn the 3D OSD menu on/off. Press "Menu" to launch the on-screen display (OSD) menu. To exit OSD, press "Menu" again - Optoma TW675UST-3D | User's Manual - Page 22
User Controls Using the Remote Control AV mute Momentarily turns off/on the audio and video. S-Video Press "S-Video" to choose S-Video source. VGA Press "VGA" to choose VGA sources. Video Press "Video" to choose Composite video source. Interactive Pen Using the Interactive Pen ON/OFF - Optoma TW675UST-3D | User's Manual - Page 23
User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the remote control or press the "HELP" button on the control panel to open the Help Menu. 23 English - Optoma TW675UST-3D | User's Manual - Page 24
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 70-75 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 24 - Optoma TW675UST-3D | User's Manual - Page 25
User Controls 25 English - Optoma TW675UST-3D | User's Manual - Page 26
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use - Optoma TW675UST-3D | User's Manual - Page 27
Automatic Phase (VGA) Frequency (VGA) H. Position (VGA) V. Position (VGA) Exit Security Security Timer Change Password Exit Settings Presentation / Bright / Movie / sRGB / Blackboard / Classroom / User / 3D -50~50 -50~50 1~15 -50~50 -50~50 Film / Video / Graphics / PC 0~10 Warm / Medium / Cold Red - Optoma TW675UST-3D | User's Manual - Page 28
Dual Pen Pointer Motion Click Speed Set function Reset Channel Information Exit Settings 0~99 On / Off 0~10 #6 Default / Audio1(Phone jack) / Audio2 (RCA R/L) Optoma / Neutral / User Off / CC1 / CC2 Yes / No On / Off On / Off On / Off On / Off Black / Red / Blue / Green / White On / Off On - Optoma TW675UST-3D | User's Manual - Page 29
(#2) For XGA model only. (#3) For WXGA model only. 16:9 or 16:10 depend on "Screen Type" setting. (#4) "3D Sync Invert" is only available when 3D is enabled. (#5) "Signal" is only supported in Analog VGA (RGB) signal. (#6) MIC volume can also be controlled by "Setup Volume" in OSD. When - Optoma TW675UST-3D | User's Manual - Page 30
from PC input. Bright: Maximum brightness from PC input. Movie: For home theater. sRGB: Standardised accurate color. Blackboard: classroom. User: User's settings. 3D: Recommand setting for 3D mode enabled. Any further ad- justments by the user in 3D will be saved in this mode for - Optoma TW675UST-3D | User's Manual - Page 31
User Controls "Color" and "Tint" functions are only supported under Video mode. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video - Optoma TW675UST-3D | User's Manual - Page 32
table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. PC: for PC or computer source. BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level - Optoma TW675UST-3D | User's Manual - Page 33
the lamp according to the picture content. On: The dynamic image performance manager is active in making sure your greatest pleasure from seeing a movie dynamically with the most dark details revealed, vivid and bright image performed all the way. Off: The dynamic image performance manager is on - Optoma TW675UST-3D | User's Manual - Page 34
16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. (576i/p) 16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. (480i/p) Native: This format displays the original image without any scaling - Optoma TW675UST-3D | User's Manual - Page 35
" setting. WXGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen laptops. LBX: This format is for non-16x9, letterbox source and for users - Optoma TW675UST-3D | User's Manual - Page 36
User Controls Each I/O has different setting of "Edge mask". "Edge mask" and "Zoom" can't work at same time. Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. Zoom Press the to reduce the size of - Optoma TW675UST-3D | User's Manual - Page 37
Sync Invert" is only available when 3D is enabled and this mode 3D is for DLP link glass only. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. 3D O ff: Select "Off" to turn 3D settings off for 3D images. D LP Link: Select "DLP Link" to use optimized - Optoma TW675UST-3D | User's Manual - Page 38
User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press "Enter" to finalize the selection. "Screen Type" is for WXGA only. Screen Type Choose the screen type from16:10 or 16:9. Projection Rear- - Optoma TW675UST-3D | User's Manual - Page 39
User Controls Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to page - Optoma TW675UST-3D | User's Manual - Page 40
User Controls SETUP Volume adjustment can also control MIC volume. Volume Press the to decrease the volume. Press the to increase the volume. Audio Input The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (1 or 2) to the - Optoma TW675UST-3D | User's Manual - Page 41
(RGB) "Signal" is only supported in Analog VGA (RGB) signal. Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings - Optoma TW675UST-3D | User's Manual - Page 42
User Controls SETUP | Security Password default value is "1234" (first time). Security On: Choose "On" to use security verification when the turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Security Timer Use this function to - Optoma TW675UST-3D | User's Manual - Page 43
User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. 43 English - Optoma TW675UST-3D | User's Manual - Page 44
changes are made they will take effect the next time the projector is powered on. Optoma: The default startup screen. Neutral: Logo is not displayed on startup screen. English. CC2:CC2 language (depending on the TV channel of the user):Spanish, French, Portuguese, German, Danish. English 44 - Optoma TW675UST-3D | User's Manual - Page 45
take effect on next open. On: Assign an IP address to the projector from an external DHCP server automatically. Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. Gateway Select the default gateway of the network connected to the projector - Optoma TW675UST-3D | User's Manual - Page 46
your projector 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. 4. Based on network web-page for the input-string in [tools When you used the projector IP address, you will can not link to your service server. English 46 - Optoma TW675UST-3D | User's Manual - Page 47
User Controls When making a direct connection from your computer to the projector Step 1: Find an IP Address (192.168.0.100) from LAN function of projector. Step 2: Select apply and press "Enter" button to submit function or press "menu" key to exit. Step 3: To open Network Connections, click Start - Optoma TW675UST-3D | User's Manual - Page 48
information and events, which are logged automatically by the software for all users. (Operation UI as following image) 1. Main Screen 2. Edit Room Crestron RoomView function support is dependent on models. English 48 - Optoma TW675UST-3D | User's Manual - Page 49
3. Edit Attribute User Controls 4. Edit Event For more information, please visit http://www.crestron.com & www.crestron.com/getroomview. 49 English - Optoma TW675UST-3D | User's Manual - Page 50
User Controls OPTIONS To turn off the keypad lock, press and hold "Enter" key on top of the projector for 5 seconds. Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High Altitude - Optoma TW675UST-3D | User's Manual - Page 51
User Controls Optional Filter Installed Select "Yes" to display warning message after 500 hours of use. Select "No" to turn off warning message. Reset Filter Warning Select "Yes" to reset the dust filter hour counter after replacing or cleaning the dust filter. Reset Choose "Yes" to return the - Optoma TW675UST-3D | User's Manual - Page 52
User Controls OPTIONS | Advanced When Power mode (Standby) is set to Eco ( - Optoma TW675UST-3D | User's Manual - Page 53
User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. When ambient temperature is - Optoma TW675UST-3D | User's Manual - Page 54
only in the following input modes: VGA and HDMI from a PC, and Wireless Display, USB Display, and LAN Display Interactive Pen is supported in 3D source of 120Hz DLP-Link. The response time lag of Dual Pen operation is 180ms. Interactive Choose "On" to enable Interactive and activate the - Optoma TW675UST-3D | User's Manual - Page 55
ouble Click: Choose the function as double-clicking. D isable: Disable the Function button. Channel A uto: Channel is selected automatically. M anual: Channel is selected manually. A total of 15 channels are available. Information View the information about the interactive pen. 55 English - Optoma TW675UST-3D | User's Manual - Page 56
. Base on network protocol, user can configure the projector remotely. It supports to connect the PC with Projector by USB, Ethernet, and Wireless. This of the network and USB capability • Web Control • Card Reader • Optoma Presenter How to use Web Control The Web Control application allows user to - Optoma TW675UST-3D | User's Manual - Page 57
User Controls 2 There are 3 options in this page. • C lick "Download", it displays the interface to download the software of "Optoma Presenter". • Click "Crestron", to enter the control page of Flash UI. • Click "Admin", the log-in page shows up. 3. Enter the password and click [Login] - Optoma TW675UST-3D | User's Manual - Page 58
User Controls Alert Setup This page is to set up the alert notification for kinds of error types by sending mail. Alert type is multi-options. SMTP Mail Setup This page is to set up the details of mail sending, ex. mail server IP address, user name, password and mail address of receivers. (Note: - Optoma TW675UST-3D | User's Manual - Page 59
User Controls • IP Setup: Click "Obtain an IP address automatically" as auto mode; click "Use the following IP Address" as static mode, IP Address/Subnet Mask/Default Gateway/ DNS Server are required to be filled and then click "Apply" button. • DHCP Server Setup: Enable/Disable, Start IP, End IP, - Optoma TW675UST-3D | User's Manual - Page 60
User Controls Click the following icons under "Play Control" • : Click to disconnect host PC. • : Click to switch session to background. • : Click to change display region. Crestron RoomView This is the control page of Flash UI. Click "Power" to control power on/off of projector. - Optoma TW675UST-3D | User's Manual - Page 61
User Controls Click "Tools", the following items are included: • Crestron Control: the basic network information of the control system device. • Projector: the ID of each projector in a building for Administrator to control. • User Password: change user's password. • Default Language: set the - Optoma TW675UST-3D | User's Manual - Page 62
User Controls Click "Help" to inform administrator to do related protection or operation. Reset to Default Click "Apply" to reset system to the default settings. Click "Flash Upgrade" to upgrade the Firmware from USB disk, which has been inserted in projector. Reboot System Click "Reboot" to reboot - Optoma TW675UST-3D | User's Manual - Page 63
the USB device into USB port of projector, source of Flash Drive is detected, and then USB Flash Devices Detection Screen is displayed. It supports 3 USB devices at the same time. 2. Press "Enter" to enter Thumbnail mode, different photos in different folders can be chosen; press "Menu" to open - Optoma TW675UST-3D | User's Manual - Page 64
3. In the menu of Thumbnail mode, choose Display function, or choose file and press "Enter" to enter Display mode. The following buttons are supported in the user interface: • Display: Enter the Image Display Mode. • Thumbnail: Enter the Thumbnail Display Mode. • Slide Show: Enter the Slide Show - Optoma TW675UST-3D | User's Manual - Page 65
3/4/5: Slide Show delay in seconds. • S lide Effect: Following modes are supported. (Slide Right/Slide Down/Slide Up/Slide Auto) • Repeat ON/OFF: the image can NOT be displayed due to memory limitation or can NOT support image format, the specific image is displayed on the center of the screen - Optoma TW675UST-3D | User's Manual - Page 66
the connection is OK, the PC will show a USB device disk. Select "Optoma Presenter", and then run "autorun.exe" to start USB Display. 1. Press the the USB display. --> 2. After installation in PC, double click the program of Optoma Pre- senter to enter main window. • : Connect and search network - Optoma TW675UST-3D | User's Manual - Page 67
type" and "Password" in log-in interface. Display port can be selected, default is "Full screen". 3. After log-in, Optoma Presenter will modify PC resolution to Ruby supported resolution, and the buttons of and become available. Click the button to select the size of projection region, including - Optoma TW675UST-3D | User's Manual - Page 68
User Controls • Fixed size mode: FIXED mode allows the user to place a frame on the desktop and only the image enclosed inside the frame is transferred to remote network display. The user can change the width and height of the frame by setting up in page "Parameter Setting"->"Basic Setting" or - Optoma TW675UST-3D | User's Manual - Page 69
User Controls • : For Administrator user login. • : For Normal user login. • : Status of the connection for connected • : Status of the connection for not connected. • : For the status and display position of local screen on the network display, change it by clicking on it and a dialog box - Optoma TW675UST-3D | User's Manual - Page 70
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and securely - Optoma TW675UST-3D | User's Manual - Page 71
PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information. Image is unstable or flickering Use "Phase" to correct it. See page 41 for more information. Change the monitor color - Optoma TW675UST-3D | User's Manual - Page 72
Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance. See page 18. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the - Optoma TW675UST-3D | User's Manual - Page 73
Appendices Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the - Optoma TW675UST-3D | User's Manual - Page 74
Appendices On Screen Messages Temperature warning: Fan failed: Lamp warning: Out of display range: Filter warning: If the remote control does not work Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the - Optoma TW675UST-3D | User's Manual - Page 75
Appendices If the Interactive pen does not work Check the input source is PC (VGA, HDMI, Wireless and LAN source) Check the Interactive function is turned On. When using Wireless or LAN connection, and the Pen does not work, check if the Wireless/Network function is turned On. If more than - Optoma TW675UST-3D | User's Manual - Page 76
message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector when opening the lamp access panel. It is recommended to wear safety glasses if changing the bulb when ceiling mounted. "Caution must be used - Optoma TW675UST-3D | User's Manual - Page 77
cannot be removed. 4 The projector cannot be turned on if the lamp cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it was accidentally touched - Optoma TW675UST-3D | User's Manual - Page 78
Appendices Replacing and cleaning the optional dust filter We recommend cleaning the dust filter after every 500 hours of use, clean it more often if the projector is used in a dusty environment. If the dust filter is installed, proper maintenance will prevent overheating and related damage to - Optoma TW675UST-3D | User's Manual - Page 79
120 120 120Hz input signals may be 832 × 624 75 75 dependent on XGA 1024 × 768 60 60 graphics cards XGA 1024 × 768 70 70 support. Please note that XGA 1024 × 768 75 75 using resolutions XGA 1024 × 768 120 120 other than native 1152 × 870 75 75 1024 x 768 (XGA - Optoma TW675UST-3D | User's Manual - Page 80
Appendices Computer Compatibility Mode MAC LC 13" MAC II 13" MAC 16" MAC 19" MAC MAC G4 i MAC DV i MAC DV Resolution 640 × 480 640 × 480 832 × 624 1024 × 768 1152 × 870 640 × 480 1024 × 768 1152 × 870 V-Sync (Hz) 66.66 66.68 74.55 75 75.06 60 75 75 H-Sync (KHz) 34.98 35.00 49.73 60.24 68.68 - Optoma TW675UST-3D | User's Manual - Page 81
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments RS232 shell is grounded. 1 2 3 Pin no. 1 2 3 Spec. (from projector side) TXD RXD GND 81 English - Optoma TW675UST-3D | User's Manual - Page 82
30 32 30 20 32 0D Bright ~XX20 3 7E 30 30 32 30 20 33 0D Movie ~XX20 4 7E 30 30 32 30 20 34 0D sRGB ~XX20 5 7E 30 30 Blackboard ~XX20 8 7E 30 30 32 30 20 38 0D Classroom ~XX20 9 7E 30 30 32 30 20 39 0D 3D ~XX21 n 7E 30 30 32 31 20 a 0D Brightness n = 0 (a=30) ~ 100 (a=31 30 30) - Optoma TW675UST-3D | User's Manual - Page 83
) ~ 40 (a=34 30) ~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode On ~XX230 0 7E 30 30 32 33 30 20 30 0D 3D Mode Off ~XX231 1 7E 30 30 32 33 31 20 31 0D 3D Sync Invert On ~XX231 0 7E 30 30 32 33 31 20 30 0D - Optoma TW675UST-3D | User's Manual - Page 84
Appendices ~XX81 n 7E 30 30 38 31 20 a 0D Volume n = 0 (a=30) ~ 20 (a=32 30) ~XX82 1 7E 30 30 38 32 20 31 0D Logo Optoma ~XX82 2 7E 30 30 38 32 20 32 0D User ~XX83 1 7E 30 30 38 33 20 31 0D Logo Capture ~XX88 0 7E 30 30 - Optoma TW675UST-3D | User's Manual - Page 85
0D Sofware Version OKdddd dddd: FW version ~XX123 1 7E 30 30 31 32 33 20 31 0D Display Mode OKn n : 0/1/2/3/4/5/6/7/8 = None/Presentation/Bright/Movie/sRGB/ User/Blackboard/Classroom/3D ~XX124 1 7E 30 30 31 32 34 20 31 0D Power State OKn n : 0/1 = Off/On ~XX125 1 7E 30 30 31 32 35 20 - Optoma TW675UST-3D | User's Manual - Page 86
Appendices Wall Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the - Optoma TW675UST-3D | User's Manual - Page 87
service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada www.optoma.ca 888-289-6786 510-897-8601 services@optoma - Optoma TW675UST-3D | User's Manual - Page 88
Latin America 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com +31 (0) 36 820 0253 +31 (0) 36 548 9052 www.optoma.nl 888-289-6786 510-897-8601 [email protected] Korea WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, seoul,135-815, KOREA +82+2+34430004 +82+2+34430005 Japan - Optoma TW675UST-3D | User's Manual - Page 89
installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Optoma TW675UST-3D | User's Manual - Page 90
2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
6
Package Overview
..............................
6
Product Overview
...............................
7
Main Unit
..............................................
7
Control Panel
.......................................
8
Input/Output Connections
....................
9
Remote Control
..................................
10
Interactive Pen
...................................
11
Installation
.....................................
12
Connecting the Projector
..................
12
Removing and Attaching the Cable
Cover
.................................................
12
Connect to Computer/Notebook
........
13
Connect to Video Sources
.................
14
Powering the projector On / Off
........
15
Powering On the Projector
.................
15
Powering Off the Projector
.................
16
Warning Indicator
...............................
16
Adjusting the Projected Image
..........
17
Adjusting the Projector’s Height
........
17
Adjusting the Projector’s Focus
.........
18
Adjusting Projection Image Size
........
18
User Controls
................................
20
Control Panel & Remote Control
......
20
Control Panel
.....................................
20
Remote Control
..................................
21
Interactive Pen
...................................
22
On-screen Display Menus
................
26
How to operate
.................................
26
Menu Tree
..........................................
27
IMAGE
...............................................
30
IMAGE | Advanced
............................
32
DISPLAY
............................................
34
DISPLAY | 3D
...................................
37
SETUP
...............................................
38
SETUP | Signal (RGB)
.......................
41
SETUP | Security
...............................
42
SETUP | Advanced
............................
44
SETUP | Network
...............................
45
OPTIONS
...........................................
50
OPTIONS | Advanced
........................
52
OPTIONS | Lamp Settings
.................
53
OPTIONS | PointBlank
......................
54
Ruby Introduction
..............................
56
How to use Web Control
...................
56
How to use the Card Reader
............
63
How to use the Optoma Presenter ... 66
Appendices
....................................
70
Troubleshooting
................................
70
Replacing the lamp
...........................
76
Replacing and cleaning the optional
dust filter
...........................................
78
Compatibility Modes
.........................
79
Computer Compatibility
.....................
79
Video Compatibility
............................
80
RS232 Commands and Protocol
Function List
.....................................
81
RS232 Pin Assignments
....................
81
RS232 Protocol Function List
............
82
Wall Mount Installation
......................
86
Optoma Global Offices
.....................
87
Regulation & Safety Notices
.............
89
Table of Contents