Optoma TW865-NL User Manual
Optoma TW865-NL Manual
 |
View all Optoma TW865-NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma TW865-NL manual content summary:
- Optoma TW865-NL | User Manual - Page 1
9 Remote Control 10 Installation 11 Connecting the Projector 11 Install the Projector Lens 11 Connect to Computer/Notebook 12 Connect use the Card Reader 67 How to use the Optoma Presenter 70 Appendices 74 Troubleshooting 74 Image Problems 74 Replacing the Lamp 78 Replacing the AFCM - Optoma TW865-NL | User Manual - Page 2
of important operating and maintenance (servicing) instructions in the literature accompanying the appliance projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma TW865-NL | User Manual - Page 3
guide. ▀■ Warning▀■ Warning▀■ Warning▀■ Warning▀■ Warning▀■ Warning- ▀■ Warning- ▀■ Warning▀■ Warning- ▀■ Warning- ▀■ Warning- Do not look into the projector please allow the unit to cool down. Follow instructions as described on pages 78-79. This projector will detect the life of the lamp itself. - Optoma TW865-NL | User Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the - Optoma TW865-NL | User Manual - Page 5
Keep your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are Product Features ▀■ XGA (1024 x 768) / WXGA (1280 x 800) Native resolution ▀■ HD compatible - 1080p supported ▀■ Extensive optional lens ▀■ Wide lens shift range - Optoma TW865-NL | User Manual - Page 6
are in the box. If something is missing, please contact your nearest customer service. NOTE Due to different applications in each Country, some regions may have different accessories. (*) Optional accessory Projector with lens cover Power Cord 3.0m AA AA VGA Cable .8m Remote Control - Optoma TW865-NL | User Manual - Page 7
Introduction Product Overview Main Unit 4 1 5 2 4 6 3 7 8 9 10 11 NOTE Do not block projector in/out air vents and keep 30cm clearance around vents for air flow concern. . Ventilation (inlet) 2. Projection Lens 3. Lens Ring Cover 4. IR Receivers 5. LED Indicators 6. - Optoma TW865-NL | User Manual - Page 8
Introduction Control Panel 1 2 5 6 10 14 15 34 7 8 9 11 12 13 16 17 18 19 20 21 . Off 2. Power button 3. Shutter 4. Source 5. Zoom 6. Focus 7. Shift 8. VGA 9. VGA 2 0. Menu . Re-Sync 2. DVI-D 3. HDMI 4. Four Directional Select Keys 5. Enter 6. YPbPr 7. BNC 8. AV Mute 9. Info. ( - Optoma TW865-NL | User Manual - Page 9
Connection Ports Introduction 1 2 345 6 22 7 21 8 20 9 19 10 11 12 13 14 15 16 17 18 NOTE (*) It does not support for basic model. . VGA-Out Connector (Monitor Loop-through Output) 2. RS-232 Connector (9-pin DIN Type) 3. VGA-In/SCART Connector (PC Analog Signal/Component Video - Optoma TW865-NL | User Manual - Page 10
Introduction Remote Control . Power On 2. Standby 3. Function / Function 2 1 (Programmable see P.58) 4. Lens Function: 2 () Lens Focus 29 (2) Lens Zoom (3) Lens Shift 28 3 4 5. LED Indicator 6. Source 27 5 7. Volume +/- 6 8. Shutter 26 7 9. Keystone 0. Display Mode 25 - Optoma TW865-NL | User Manual - Page 11
to adjust the lens shift or zoom/focus while the lens attachment process is carried out. Warning: Do not transport the projector with any lens installed. 1 2 3 4 5 6 Lens Installing Procedure: . Remove the lens ring cover. 2. Remove the lens cap counterclockwise. 2 3. Pull the bar to - Optoma TW865-NL | User Manual - Page 12
Installation Connect to Computer/Notebook Computer/Notebook Monitor 1 2 3 Audio Output 3 4 MOLEX R molex 5 7 6 9 10 8 Computer/Notebook NOTE Due to the difference in applications for each country, some regions may have different accessories. (*) Optional accessory . HDMI Cable * - Optoma TW865-NL | User Manual - Page 13
Installation Connect to Video Sources DVD Player, Set-top Box, HDTV receiver 1 Composite Video Output S-Video Output 2 3 4 5 6 Audio Output NOTE 2 2V 3.5mm Jack 7 Power N.C. N.C. 9 10 8 R DVD Player, Set-top Box, HDTV receiver NOTE Due to the difference in applications for each - Optoma TW865-NL | User Manual - Page 14
language and power saving mode. 3. Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push menu button and go to "OPTIONS". Make sure that the "Source Lock" has been set to "Off - Optoma TW865-NL | User Manual - Page 15
or "Off" on the control panel again to confirm otherwise the message will disappear after 5 seconds. When you pressing for the second time, the projector will shut down. 2. The cooling fans continue to operate for about 60 seconds for cooling cycle and the POWER LED will flash Blue. When the - Optoma TW865-NL | User Manual - Page 16
Installation NOTE Contact the nearest service center if the projector displays these symptoms. See pages 92-93 for more information. Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: "LAMP" LED indicator is lit orange and if "POWER" - Optoma TW865-NL | User Manual - Page 17
for adjusting the image height. . Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring - Optoma TW865-NL | User Manual - Page 18
of your power outlets, and the distance between the projector and the rest of your equipment. XGA WXGA 60%H 50%H Height (H) Height (H) 60%H Width Optoma Model Name Focal Length (f) (mm) F number Zoom Range (Ratio) Zoom & Focus Adjustment Motorized Lens Shift (XGA) Motorized Lens Shift (WXGA) - Optoma TW865-NL | User Manual - Page 19
4095 6155 8220 10280 12345 14405 16470 18530 20590 Wide 1090 1370 1650 1930 2210 2490 2765 4165 5560 6960 8360 9760 11155 12555 13955 WXGA Tele 1370 1720 2065 2415 2765 3115 3465 5215 6960 8705 10450 12200 13945 15695 17440 Wide 1000 1255 1515 1775 2030 2285 2545 3830 - Optoma TW865-NL | User Manual - Page 20
7810 11740 15675 19605 23540 27470 31405 35335 39270 Wide 1340 1690 2040 2390 2740 3090 3440 5185 6935 8685 10435 12185 13935 15685 17435 WXGA Tele 2610 3275 3945 4610 5275 5945 6610 9945 13275 16610 19940 23275 26610 29940 33275 English 20 - Optoma TW865-NL | User Manual - Page 21
Remote Control Control Panel Using the Control Panel Off Power On Shutter Source Zoom Focus Shift VGA VGA 2 Menu Turn off the projector. Turn on the projector. Open/close the built-in shutter. Press "SOURCE" to select an input signal. Adjust lens zoom function. Adjust lens focus function. Adjust - Optoma TW865-NL | User Manual - Page 22
the Control Panel Re-Sync DVI-D HDMI Four Directional Select Keys Enter YPbPr BNC AV Mute Info. (Information) S-Video Video Automatically synchronize the projector to the input source. Press "DVI-D" to choose source from DVI-D connector. Press "HDMI" to choose source from HDMI connector. Use to - Optoma TW865-NL | User Manual - Page 23
select an input signal. Adjust to increase / decrease the volume. Open/close the built-in shutter. Adjust image distortion caused by tilting the projector. Select the display mode from Presentation, Bright, Movie, sRGB, Blackboard, Classroom, DICOM SIM., 3D, ISF Day, ISF Night and User. Press "HDMI - Optoma TW865-NL | User Manual - Page 24
User Controls Using the Remote Control All Video ID BNC VGA 2 VGA 1 S-Video Format Menu Four Directional Select Keys Enter Test Pattern AV Mute Restore the default remote code. Press "Video" to choose composite video source. Set the remote code. Press "BNC" to choose source from BNC (YPbPr/RGBHV) - Optoma TW865-NL | User Manual - Page 25
can be set by pressing "All" key continuously until LED indicator quickly blinking 3 times. (around 3 seconds) Regardless of projector's remote code, the remote control can operate each projector simultaneously if the remote code of remote control is set at default code. Remote code setting: 01 ~ 99 - Optoma TW865-NL | User Manual - Page 26
User Controls Cable Connection for Wired Control As remote control connects with projector by cable IR emitter signal will be cut off. No extra setting need. Projector (I) 1 Projector (II) 2 1 NOTE (*) Optional accessory Use cable length of 20m or less, if the length of cable exceeds 20m - Optoma TW865-NL | User Manual - Page 27
has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate . To open the OSD menu, press "Menu" on the Remote Control or Control Panel. 2 When OSD is - Optoma TW865-NL | User Manual - Page 28
the signal type selected and the projector model you are using. (*) Color Settings Input Source Exit (XGA) (WXGA) Off Keystone 4-Corner Curve PC Mode PIP Size 1/16 / 1/25 / 1/36 PIP Source Swap Exit 3D Mode Off / DLP-Link / VESA 3D 3D Sync. Invert Off / On Exit English / Deutsch / Franç - Optoma TW865-NL | User Manual - Page 29
Sub Menu Signal (RGB) Signal (Video) Projector ID Audio Settings Advanced Network * Image -50~50 -50~50 -50~50 0 / 7.5 Off / On Off / On 0~10 Default / Audio 1 / Audio 2 / Audio 3 Optoma / Neutral / User CC1 / CC2 / Off Month / Day / Hour / Exit Off / On Yes / No Off / On Off / On Overlap - Optoma TW865-NL | User Manual - Page 30
User Controls IMAGE NOTE 3D mode only supports below 3D sources. Input source timing-120Hz frame sequential: 1. 1280x720 120Hz 2. 1024x768 120Hz 3. 800x600 120Hz Display Mode There are many factory presets optimized for various - Optoma TW865-NL | User Manual - Page 31
NOTE "Color" and "Tint" are only supported for composite and component sources. User Controls Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Press - Optoma TW865-NL | User Manual - Page 32
for home theater. Video: for video or TV source. Graphics: for image source. Standard: for standardized setting. DynamicBlack DynamicBlack enables the projector to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. True Vivid This adjustable - Optoma TW865-NL | User Manual - Page 33
NOTE "RGB(0-255)" and "RGB(6235)" are only supported for HDMI source. User Controls Color Space Select an appropriate color matrix type from and select which sources you require. Press "Enter" to finalize the selection. The projector will not search for inputs that are not selected. 33 English - Optoma TW865-NL | User Manual - Page 34
User Controls DISPLAY Format Use this function to choose your desired aspect ratio. XGA 4:3: This format is for 4x3 input sources. 16:9-I: This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen TV. (576i/p) 16:9-II: This format is for 16x9 input sources, like HDTV - Optoma TW865-NL | User Manual - Page 35
User Controls WXGA 4:3: This format is for 4x3 input sources. 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16: - Optoma TW865-NL | User Manual - Page 36
User Controls NOTE Each I/O has different settings of "Edge Mask". "Edge Mask" and "Zoom" can't work at same time. Zoom Press the ◄ to reduce the size of an image. Press the ► to magnify an image on the projection screen. Edge Mask Edge mask function removes the noise in a video image. - Optoma TW865-NL | User Manual - Page 37
or ► to adjust the keystone vertically and make a squarer image. Resolution Degrees of keystone Correction Horizontal Vertical XGA +/- 40 +/- 40 WXGA +/- 40 +/- 40 Pincushion/Barrel: Press the ◄ or ► to adjust the pincush- ion/barrel distortion. +/- 20% pincushion and barrel distortion - Optoma TW865-NL | User Manual - Page 38
User Controls 4-Corner This allows you to correct the trapezoidal distortion. 4 Corner position adjustments: Top Left, Bottom Left, Top Right, Bottom Right and All. Maximum is 5%. Press the ◄ or ► to adjust x/y offset of each corner image. Curve This allows you to adjust the curve of point 1~9. - Optoma TW865-NL | User Manual - Page 39
User Controls DISPLAY | PIP Screen Single: Projection single screen. PIP Window: Main Screen is large screen; PIP Screen is small and displays in the corner of the main screen. Split Screen: Main Screen and PIP Screen are equal sizes and side by side. PIP Location Choose the PIP - Optoma TW865-NL | User Manual - Page 40
active shutter glasses are required for 3D viewing. 3D Mode Off: Select "Off" to turn 3D settings off for 3D images. DLP Link: Select "DLP Link" to use optimized settings for DLP Link 3D images. VESA 3D: Select "VESA 3D" to use optimized setting for VESA 3D images. 3D Sync. Invert Press the - Optoma TW865-NL | User Manual - Page 41
User Controls SETUP Language Choose the multilingual OSD menu. Press ◄ or ► into the sub menu and then use the ▲ or ▼ to select your preferred language. Press "Enter" to finalize the selection. NOTE Rear-Desktop and Rear-Ceiling are to be used with a translucent screen. Projection Front- - Optoma TW865-NL | User Manual - Page 42
"Screen Type" is only available for WXGA model. Screen Type Choose the screen type from 16:10 or 16:9. Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Refer to pages - Optoma TW865-NL | User Manual - Page 43
User Controls SETUP | Lens Function Focus Adjust focus function on the projected image. Zoom Adjust zoom function on the projected image. Lens Shift Shift the projected image. Lock: This function can not be used by user. Unlock: This function can be used by user. Lens Type Choose the lens type - Optoma TW865-NL | User Manual - Page 44
If the password is forgotten or lost, the projector will have to be sent to your local authorized service center. Security Timer On: Choose "On" 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. Security On - Optoma TW865-NL | User Manual - Page 45
Controls SETUP | Signal (RGB) NOTE "Signal" is only supported in Analog VGA (RGB) signal. Frequency Change the display data automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. 45 English - Optoma TW865-NL | User Manual - Page 46
when the source is HDMI or DVI-D. NOTE "IRE" is only supported on NTSC signal. White Level Allow user adjust White Level when inputting S-Video or Video/ CVBS signals. Black Level Allow user adjust Black Level when - Optoma TW865-NL | User Manual - Page 47
Press the ◄ to decrease the volume. Press the ► to increase the volume. Audio Input The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (1 ,2 or 3) to the current image source. Each Audio input can be assigned to more than - Optoma TW865-NL | User Manual - Page 48
. Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Optoma: The default startup screen. Neutral: Logo is not displayed on startup screen. User: Use stored picture from "Logo Capture" function. Logo - Optoma TW865-NL | User Manual - Page 49
the OSD menu, the new setting will take effect on next open. On: Assign an IP address to the projector from an external DHCP server automatically. Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. Gateway Select the default gateway of the - Optoma TW865-NL | User Manual - Page 50
User Controls How to use web browser to control your projector . Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. Please note, each field can only contain a limited number of characters, as shown in the table below. (spaces - Optoma TW865-NL | User Manual - Page 51
User Controls When making a direct connection from your computer to the projector Step : Find an IP Address (92.68.0.00) from LAN function of projector. 192.168.0.100 Step 2: Select "Apply" and push the "Enter" button. Once the setting is saved, exit the OSD by pushing "Menu" button. Step 3: - Optoma TW865-NL | User Manual - Page 52
function support is dependent on models. Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projector - Optoma TW865-NL | User Manual - Page 53
3. Edit Attribute User Controls 4. Edit Event For more information, please visit http://www.crestron.com & www.crestron.com/getroomview. 53 English - Optoma TW865-NL | User Manual - Page 54
User Controls SETUP | Image Blending * NOTE (*) Optional function Blending Choose the "On" to turn blending on. Choose the "Off" to turn blending off. Crop Choose the "On" to turn crop on. Choose the "Off" to turn crop off. Overlap This allows you to set the overlap edge of blending area - Optoma TW865-NL | User Manual - Page 55
: Choose "Off" to show the "searching" message. Keypad Lock When the keypad lock function is "On", the control panel will be locked however, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the control panel. Test Pattern Display a test pattern - Optoma TW865-NL | User Manual - Page 56
User Controls OPTIONS (Continued) NOTE Remote code: show the remote code of the projector. Remote code(Active): show the remote code of the remote control. Information Display the projector information for source, resolution, and software version on the screen. Reset Choose "Yes" to return - Optoma TW865-NL | User Manual - Page 57
30 hours before suggested replacement of lamp. Brightness Mode Bright: Choose "Bright" to increase the brightness. Eco: Choose "Eco" to dim the projector lamp which will lower power consumption and extend the lamp life. Image AI: Image AI improves the contrast of the picture by optimizing the - Optoma TW865-NL | User Manual - Page 58
"PIP Swap" or "Color". Top IR Sensor When this function is "On", the projector can be operated by the remote control from top IR receiver. By selecting "Off", IR receiver. Front IR Sensor When this function is "On", the projector can be operated by the remote control from front IR receiver. By - Optoma TW865-NL | User Manual - Page 59
Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Sets the countdown timer interval. The countdown timer - Optoma TW865-NL | User Manual - Page 60
Introduction * Network application system include Optoma Presenter System, Web Control System and Multi-media Card Reader. Application which can bring the high performance in network projection. Base on network protocol, user can configure the projector remotely. It supports to connect the PC with - Optoma TW865-NL | User Manual - Page 61
User Controls 2 There are 3 options in this page. Click "Download", it displays the interface to download the software of "Optoma Presenter". Click "Crestron", to enter the control page of Flash UI. Click "Admin", the log-in page shows up. 3. Enter the password and click [Login] - Optoma TW865-NL | User Manual - Page 62
Control All items in this page is the detail options about how to control the projector more smoothly. Example: Power On/OFF, Source change, Brightness, ....This page will refresh the status currently of all the items in few seconds. Alert Setup - Optoma TW865-NL | User Manual - Page 63
User Controls IP Setup: Click "Obtain an IP address automatically" as auto mode; click "Use the following IP Address" as static mode, IP Address/Subnet Mask/Default Gateway/ DNS Server are required to be filled and then click "Apply" button. DHCP Server Setup: Enable/Disable, Start IP, End IP, - Optoma TW865-NL | User Manual - Page 64
This is the control page of Flash UI. Click "Power" to control power on/off of projector. Click "Vol-, Mute, Vol+" to control volume. In the SourceList, it includes all sources that the projector can process. Click "Menu" to open menu; click "Source" to choose next source; click "Auto" to - Optoma TW865-NL | User Manual - Page 65
Click "Tools", the following items are included: Crestron Control: the basic network information of the control system device. Projector: the ID of each projector in a building for Administrator to control. User Password: change user's password. Default Language: set the default language - Optoma TW865-NL | User Manual - Page 66
Default Click "Apply" to reset system to the default settings. Click "Flash Upgrade" to upgrade the Firmware from USB disk, which has been inserted in projector. Reboot System Click "Reboot" to reboot system. English 66 - Optoma TW865-NL | User Manual - Page 67
display packaged images in a USB flash device. 1. Plugging the USB device into USB port of projector, source of Flash Drive is detected, and then USB Flash Devices Detection Screen is displayed. It supports 3 USB devices at the same time. 2. Press "Enter" to enter Thumbnail mode, different photos - Optoma TW865-NL | User Manual - Page 68
In the menu of Thumbnail mode, choose Display function, or choose file and press "Enter" to enter Display mode. The following buttons are supported in the user interface: Display: Enter the Image Display Mode. Thumbnail: Enter the Thumbnail Display Mode. Slide Show: Enter the Slide Show Mode - Optoma TW865-NL | User Manual - Page 69
User Controls Slide Effect: Following modes are supported. (Slide Right/Slide Down/Slide Up/Slide Auto) Repeat ON/OFF: Enable/Disable the image can NOT be displayed due to memory limitation or can NOT support image format, the specific image is displayed on the center of the screen. 69 English - Optoma TW865-NL | User Manual - Page 70
). This software can be downloaded from web page. Before using this function, a USB cable is needed to connect the Projector and PC Host directly. display. --> 2. After installation in PC, double click the program of Optoma Pre- senter to enter main window. : Connect and search network display - Optoma TW865-NL | User Manual - Page 71
button to search the projectors on network and select projectors to connect. 2. Input "User type" and "Password" in log-in interface. Display port can be selected, default is "Full screen". 3. After log-in, Optoma Presenter will modify PC resolution to Ruby supported resolution, and the buttons - Optoma TW865-NL | User Manual - Page 72
JPEG image quality, YUV sample format and network port. Click the button to control all the users and all the projectors connected to the same projector. English 72 : For Administrator user login. : For Normal user login. : Status of the connection for connected. : Status of the connection - Optoma TW865-NL | User Manual - Page 73
User Controls : Click this unlock icon, the password can be changed. (Password change to target network display, only a connection with an Administrator user logged in can change the password.) : Click this lock icon will result in no response. : Disconnect with target network display. : - Optoma TW865-NL | User Manual - Page 74
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image Problems N o image appears on-screen Ensure all the cables and power connections are correctly - Optoma TW865-NL | User Manual - Page 75
keys listed below for your notebook manufacturer to send signal out from notebook to projector. Example: [Fn]+[F4] Acer [Fn]+[F5] Gateway [Fn]+[F4 has a different way to be reactivated. Refer to your computer's manual for detailed information. Image is unstable or flickering Use - Optoma TW865-NL | User Manual - Page 76
Check that "Keypad Lock" is not activated by trying to control the projector with the remote control. L amp burns out or makes a popping sound burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the - Optoma TW865-NL | User Manual - Page 77
±30° both horizontally and vertically of one of the IR receivers on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 2 m (±0°) of the projector. Make sure the batteries are inserted correctly. Replace batteries if they are - Optoma TW865-NL | User Manual - Page 78
the lamp as soon as possible. Please contact your local reseller or Optoma to acquire a lamp. Warning: If ceiling mounted, please use caution "Caution must be used to prevent any loose parts from falling out of projector." Warning: Lamp compartment is hot! Allow it to cool down before changing - Optoma TW865-NL | User Manual - Page 79
the lamp housing. 3 7. Pull out the lamp module slowly and carefully. 4 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and use "Lamp Reset" after the lamp module is replaced. Lamp Reset: (i) Press "Menu" (ii) Select "OPTIONS" (iii) Select "Lamp Settings" (iv - Optoma TW865-NL | User Manual - Page 80
to change the AFCM as soon as possible. Please contact your local reseller or Optoma to acquire a AFCM. If the prior message is ignored for a period of time, a warning message will be displayed and then the projector will be shut down automatically. At this point, it is recommended to change the - Optoma TW865-NL | User Manual - Page 81
Appendices 1 2 3 4 AFCM Replacing Procedure: 1. Gently push down the AFCM door. 1 2. Lift the AFCM door. 2 3. Turn the latch clockwise. 3 4. Gently pull out the AFCM module. 4 To install the AFCM, reverse the previous steps. 81 English - Optoma TW865-NL | User Manual - Page 82
Appendices Replacing the Geo Module 2 1 3 4 English 82 Geo Module Replacing Procedure: 1. Remove the 2 screws on Geo cover and then raise the Geo cover. 1 2. Remove the 2 screws and slide Geo shielding cover to the right. 2 3. Remove 4 remaining screws and dummy board. 3 4. Replace the Geo - Optoma TW865-NL | User Manual - Page 83
Appendices Compatibility Modes Computer Compatibility (PC) Signal NTSC PAL/SECAM VGA SVGA XGA HD720 WXGA WXGA-800 SXGA SXGA+ UXGA HD1080 WUXGA Resolution 640 x 350 640 x 400 720 x 400 720 x 400 720 x 576 640 x 480 640 x 480 640 x 480 640 x 480 - Optoma TW865-NL | User Manual - Page 84
30 50 60 60 50 60 50 50 50 60 60 60 Video V V V V V - Digital V V V V V V V V V V V V V Analog V V V V V V V V V V V V V NOTE 1920 x 1200 @60hz only support RB (reduced blanking). Computer Compatibility for MAC Resolution 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 - Optoma TW865-NL | User Manual - Page 85
Appendices Remote Key Code Default custom code => 32CD Mode 01 ~ 99 => 3201 ~ 3299 Key name Custom code Byte 1 Byte 2 Data Byte 3 Power On 32 CD 02 Standby 32 CD 33 Test Pattern 32 CD 34 AV Mute 32 CD 03 Fun1 32 CD 26 Fun2 32 CD 27 Shift 32 CD 2F Zoom 32 CD 2A - Optoma TW865-NL | User Manual - Page 86
Pin Assignments NOTE RS232 shell is grounded. RS232 interface need use swap pin for RS232 communication. 9876 54321 Pin No. 2 3 4 5 6 7 8 9 PC Side N/A RXD TXD N/A GND N/A N/A N/A N/A Projector Side (RS232 Terminal) N/A RXD TXD N/A GND N/A N/A N/A N/A English 86 - Optoma TW865-NL | User Manual - Page 87
Appendices RS232 Protocol Function List OptomaRS232CommandTable BaudRate:9600 DataBits:8 Parity:None StopBits:1 FlowControl:None UART16550FIFO:Disable ProjectorReturn(Pass):P ProjectorReturn(Fail):F SENDtoprojector 232ASCIICode HEXCode ~XX001 7E3030303020 - Optoma TW865-NL | User Manual - Page 88
Off HDMI DVI BNC VGA1 VGA2 3xRCAComponent SͲVideo Video FlashDrive Presenter USBDisplay 4:3 16:9ͲI/16:9 16:9ͲII/16:10 LBX Native Auto Off DLPͲLink VESA3D/IR On Off Off PIP SBS TopLeft TopRight BottomLeft BottomRight 1/16 1/25 1/36 HDMI VGA1 Component VGA2 BNC - Optoma TW865-NL | User Manual - Page 89
Hour LampReminder BrightnessMode LampReset VGAOut Reset Lamp/Temp./FanError Reset On Off On Off On Off Default Audio1 Audio2 Audio3 Optoma User Neutral CC1 CC2 Off Lock Unlock Up Down Left Right Lock Unlock Zoom+ ZoomͲ Focus+ FocusͲ 16:10 16:9 On Off On Off On - Optoma TW865-NL | User Manual - Page 90
1 ~XX1521 7E303031353120310D 7E303031353220310D Modelname RS232Version ProjectorReturn INFOa Description a:0/1/2/3/4/5/6/7/8=Standby/Warmingup/ CoolingDown/OutofRange/LampFail/ThermalSwitch Error/FanLock/OverTemperature/LampHours - Optoma TW865-NL | User Manual - Page 91
Ceiling Mount Installation . To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projector met the following specifications: Screw type: M8*4 Recommended - Optoma TW865-NL | User Manual - Page 92
Europe 42 Caxton Way, The Watford Business Park Watford, Hertfordshire, WD8 8QZ, UK www.optoma.eu Service Tel: +44 (0)923 69865 Benelux BV Randstad 22-23 36 BW Almere The Netherlands www.optoma.nl France Bâtiment E 8-83 avenue Edouard Vaillant 9200 Boulogne Billancourt, France Spain C/ Jos - Optoma TW865-NL | User Manual - Page 93
Appendices +49 (0) 2 506 6670 +49 (0) 2 506 66799 [email protected] +47 32 98 89 90 +47 32 98 89 99 [email protected] +82+2+34430004 +82+2+34430005 [email protected] www.os-worldwide.com +886-2-228-2360 +886-2-228-233 [email protected] asia.optoma.com +852-2396-8968 +852-2370-222 www - Optoma TW865-NL | User Manual - Page 94
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there which is granted by the Federal Communications Commission, to operate this projector. Operation Conditions This device complies with Part 15 of the FCC - Optoma TW865-NL | User Manual - Page 95
2004/108/EC (including amendments) Low Voltage Directive 2006/95/EC R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
 |
 |
English
±
Table of Contents
Table of Contents
........................
1
Usage Notice
...............................
2
Safety Information
.......................................
2
Precautions
.................................................
3
Eye Safety Warnings
...................................
5
Product Features
.........................................
5
Introduction
.................................
6
Package Overview
......................................
6
Product Overview
........................................
7
Main Unit
..........................................................
7
Control Panel
...................................................
8
Connection Ports
.............................................
9
Remote Control
..............................................
±0
Installation
.................................
11
Connecting the Projector
...........................
±±
Install the Projector Lens
...............................
±±
Connect to Computer/Notebook
....................
±2
Connect to Video Sources
.............................
±3
Powering On/Off the Projector
..................
±4
Powering On the Projector
.............................
±4
Powering Off the Projector
.............................
±5
Warning Indicator
...........................................
±6
Adjusting the Projected Image
..................
±7
Adjusting the Projector’s Height
.....................
±7
Adjusting the Projector’s Position
..................
±8
User Controls
............................
21
Control Panel & Remote Control
...............
2±
Control Panel
.................................................
2±
Remote Control
..............................................
23
Remote Code Setting
....................................
25
Cable Connection for Wired Control
..............
26
On-screen Display Menus
.........................
27
How to operate
..............................................
27
Menu Tree
.................................................
28
IMAGE
...........................................................
30
IMAGE | Advanced
........................................
32
DISPLAY
........................................................
34
DISPLAY | Geometry *
...................................
37
DISPLAY | PIP
...............................................
39
DISPLAY | 3D
................................................
40
SETUP
...........................................................
4±
SETUP | Lens Function
.................................
43
SETUP | Security
...........................................
44
SETUP | Signal (RGB)
...................................
45
SETUP | Signal (Video)
.................................
46
SETUP | Audio Settings
.................................
47
SETUP | Advanced
........................................
48
SETUP | Network
...........................................
49
SETUP | Image Blending *
.............................
54
OPTIONS
.......................................................
55
OPTIONS | Lamp Settings
.............................
57
OPTIONS | Remote Settings
.........................
58
OPTIONS | Advanced
....................................
59
Network Application System Introduction *
60
How to use Web Control
................................
60
How to use the Card Reader
.........................
67
How to use the Optoma Presenter
................
70
Appendices
................................
74
Troubleshooting
.........................................
74
Image Problems
.............................................
74
Replacing the Lamp
..................................
78
Replacing the AFCM
.................................
80
Replacing the Geo Module
........................
82
Compatibility Modes
..................................
83
Remote Key Code
.....................................
85
RS232 Commands and Protocol Function
List
.............................................................
86
RS232 Pin Assignments
................................
86
RS232 Protocol Function List
........................
87
Ceiling Mount Installation
..........................
9±
Optoma Global Offices
..............................
92
Regulation & Safety Notices
......................
94
FCC Notice
....................................................
94
Declaration of Conformity for EU countries ...95