Optoma TX565UT-3D User Manual
Optoma TX565UT-3D Manual
 |
View all Optoma TX565UT-3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma TX565UT-3D manual content summary:
- Optoma TX565UT-3D | User Manual - Page 1
Remote Control 10 Installation 11 Connecting the Projector 11 Removing and Attaching the Cable Cover 3D 35 SETUP 36 SETUP | Signal (RGB 39 SETUP | Security 40 SETUP | Advanced 42 SETUP | Network 43 OPTIONS 48 OPTIONS | Advanced 50 OPTIONS | Lamp Settings 51 Appendices 52 Troubleshooting - Optoma TX565UT-3D | User Manual - Page 2
of important operating and maintenance (servicing) instructions in the literature accompanying the appliance projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma TX565UT-3D | User Manual - Page 3
in this user's guide. ▀■ Warning- Do not look into the projector's lens when the cool down. Follow instructions as described on pages 57-58. ▀■ Warning- This projector will detect the life on the screen. Please contact your local reseller or service center to change the lamp as soon under "Replacing - Optoma TX565UT-3D | User Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the - Optoma TX565UT-3D | User Manual - Page 5
your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are ) Native resolution / WXGA (1280x800) Native resolution ▀■ HD compatible - 1080p supported ▀■ VGA monitor loop through (works on standby mode > 1W) ▀■ BrilliantColorTM - Optoma TX565UT-3D | User Manual - Page 6
contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m Due to different applications in each country, some regions may have different accessories. 2 × AAA - Optoma TX565UT-3D | User Manual - Page 7
RS-232 VIDEO S-VIDEO VGA1-IN / SCART / YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 9 8 4 5 15 5 10 2 13 14 1. Control Panel 2. IR Receivers 3. Cable Cover 4. Speaker 5. Tilt-Adjustment Feet 6. Mirror Cover 7. Input / Output - Optoma TX565UT-3D | User Manual - Page 8
Introduction Control Panel 1 2 3 4 5 6 7 89 10 1. Lamp LED 2. Temp LED 3. Source 4. Re-Sync 5. Help 6. Power/Standby button and LED 7. Enter 8. Keystone Correction 9. Four Directional Select Keys 10. Menu English 8 - Optoma TX565UT-3D | User Manual - Page 9
VGA1-IN / SCART / YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr 14 VGA-OUT 89 HDMI SERVICE RJ-45 15 Monitor loop through only support in VGA1-In/ SCART/YPbPr. 1. 12V Trigger Relay (12V, 250mA) 2. 3.5mm Mini Jack Audio1 Input for VGA1/VGA2 3. 3pin Mini - Optoma TX565UT-3D | User Manual - Page 10
21 22 23 1. LED Indicator 2. Power On/Off 3. Four Directional Select Keys 24 4. Mouse Right Click 5. Page Up 6. Re-Sync 7. Page Down 3 8. Volume +/- 4 9. 3D 10. AV mute 5 11. Video 6 12. PC/Mouse control 7 13. Mouse Left Click 14. Enter/Help 8 15. Source 9 16. Keystone +/17. Menu 10 - Optoma TX565UT-3D | User Manual - Page 11
Installation Connecting the Projector Removing and Attaching the Cable Cover Cable Cover 2 1 Procedure for Removing and Attaching the Cable Cover: 1. Unscrew the screw on the cable cover. 1 2. Lift up and remove the cable cover. 2 Install the cable cover by reversing the previous steps. 11 English - Optoma TX565UT-3D | User Manual - Page 12
232 VIDEO S-VIDEO VGA1-IN / SCART / YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 R E62405SP 8 9 1...Power Cord 2 Audio Output Cable 3 Audio Input Cable 4 RS232 Cable 5...VGA Cable 6 HDMI Cable 7...*USB Cable 8 Network Cable - Optoma TX565UT-3D | User Manual - Page 13
SCART / YPbPr 12V OUT L R AUDIO OUT MIC AUDIO2-IN (S-VIDEO/VIDEO) VGA2-IN / YPbPr VGA-OUT HDMI SERVICE RJ-45 9 R E62405SP 10 DVD Player, Set-top Box, HDTV receiver Due to the difference in applications for each country, some regions may have different accessories. (*) Optional - Optoma TX565UT-3D | User Manual - Page 14
Turn on the lamp by pressing " " button either on the top of the projector or on the remote. The POWER/STANDBY LED will now turn Green. When to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push menu button and go to - Optoma TX565UT-3D | User Manual - Page 15
When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the nearest service center if the "LAMP" LED indicator is lit red and if "POWER/STANDBY" indicator flashes amber. projector displays these symptoms. See pages 68-69 for more information - Optoma TX565UT-3D | User Manual - Page 16
feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. English 16 Tilt-Adjustment Feet Tilt - Optoma TX565UT-3D | User Manual - Page 17
's Focus To focus the image, rotate the focus ring until the image is clear. XGA series: The projector will focus at distances from 1.58 to 2.17 feet (475 to 662 mm). WXGA series: The projector will focus at distances from 1.58 to 2.17 feet (495 to 661 mm). Focus Ring Adjusting Projection - Optoma TX565UT-3D | User Manual - Page 18
Installation Screen Center (W) Screen Diagonal B=>Vertical distance between lens center and screen center (H) C,E=>T hrow distance D=>V ertical distance between lens center and bottom of screen (top of screen for ceiling mount) α=>Throw angle (B) (D) Throw Angle (α) Lens Center (C) (E) - Optoma TX565UT-3D | User Manual - Page 19
Control Control Panel Using the Control Panel Power/ Standby button and LED Refer to the "Power On/Off the Projector" section on pages 14-15. Indicate the projector's status. RE-SYNC Enter SOURCE Menu Four Directional Select Keys Keystone HELP Lamp LED Temp LED Automatically synchronize the - Optoma TX565UT-3D | User Manual - Page 20
or make adjustments to your selection. Adjust image distortion caused by tilting the projector. Volume +/- Adjust to increase / decrease the volume. Brightness Adjust the brightness of the image. 3D Menu HDMI Press the "3D" to turn the 3D OSD menu on/off. Press "Menu" to launch the on-screen - Optoma TX565UT-3D | User Manual - Page 21
User Controls Using the Remote Control AV mute Momentarily turns off/on the audio and video. S-Video Press "S-Video" to choose S-Video source. VGA Press "VGA" to choose VGA sources. Video Press "Video" to choose Composite video source. 21 English - Optoma TX565UT-3D | User Manual - Page 22
User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the remote control or press the "HELP" button on the control panel to open the Help Menu. English 22 - Optoma TX565UT-3D | User Manual - Page 23
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 52-56 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. 23 English - Optoma TX565UT-3D | User Manual - Page 24
User Controls English 24 - Optoma TX565UT-3D | User Manual - Page 25
you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu. While making a selection on a particular page, press or "Enter - Optoma TX565UT-3D | User Manual - Page 26
Timer Change Password Exit Settings Presentation / Bright / Movie / sRGB / Blackboard / Classroom / User / 3D -50~50 -50~50 1~15 -50~50 LBX / Native / AUTO 0~10 -5~25 (80%~200%) -50~50 -50~50 -40~40 Off / DLP-Link / IR On / Off English / Deutsch / Français / Italiano / Español / Português / - Optoma TX565UT-3D | User Manual - Page 27
0~10 #6 Default / Audio1(Phone jack) / Audio2 (RCA R/L) Optoma / Neutral / User Off / CC1 / CC2 Yes / No On and the projector model you are using. (#1) "Color" and "Tint" are only supported in Video (#4) "3D Sync Invert" is only available when 3D is enabled. (#5) "Signal" is only supported in - Optoma TX565UT-3D | User Manual - Page 28
from PC input. Bright: Maximum brightness from PC input. Movie: For home theater. sRGB: Standardised accurate color. Blackboard: classroom. User: User's settings. 3D: Recommand setting for 3D mode enabled. Any further ad- justments by the user in 3D will be saved in this mode for - Optoma TX565UT-3D | User Manual - Page 29
User Controls "Color" and "Tint" functions are only supported under Video mode. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video - Optoma TX565UT-3D | User Manual - Page 30
table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. PC: for PC or computer source. BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and system level - Optoma TX565UT-3D | User Manual - Page 31
which sources you require. Press "Enter" to finalize the selection. The projector will not search for inputs that are not selected. Image AI Image AI manager is active in making sure your greatest pleasure from seeing a movie dynamically with the most dark details revealed, vivid and bright image - Optoma TX565UT-3D | User Manual - Page 32
16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. (576i/p) 16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. (480i/p) Native: This format displays the original image without any scaling - Optoma TX565UT-3D | User Manual - Page 33
" setting. WXGA 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen laptops. LBX: This format is for non-16x9, letterbox source and for users - Optoma TX565UT-3D | User Manual - Page 34
User Controls Each I/O has different setting of "Edge mask". "Edge mask" and "Zoom" can't work at same time. Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. Zoom Press the to reduce the size of - Optoma TX565UT-3D | User Manual - Page 35
when 3D is enabled and this mode 3D is for DLP link glass only. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. 3D O ff: Select "Off" to turn 3D settings off for 3D images. D LP Link: Select "DLP Link" to use optimized settings for DLP Link 3D images - Optoma TX565UT-3D | User Manual - Page 36
User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press "Enter" to finalize the selection. "Screen Type" is for WXGA only. Screen Type Choose the screen type from16:10 or 16:9. Projection Rear- - Optoma TX565UT-3D | User Manual - Page 37
appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Projector ID ID definition can be set up by menu (range 0~99), and allow user control an individual projector by RS232. Refer to page 62~66 for the complete list of RS232 commands. Mute Choose - Optoma TX565UT-3D | User Manual - Page 38
Press the to decrease the volume. Press the to increase the volume. Audio Input The default audio settings are on the back panel of the projector. Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source. Each Audio input can be assigned to more than - Optoma TX565UT-3D | User Manual - Page 39
, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the image - Optoma TX565UT-3D | User Manual - Page 40
default value is "1234" (first time). Security On: Choose "On" to use security verification when the turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Security Timer Use this function to set the how long (Month/Day/Hour) the - Optoma TX565UT-3D | User Manual - Page 41
User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. 41 English - Optoma TX565UT-3D | User Manual - Page 42
projector is powered on. Optoma : The default startup screen. Neutral: Logo is not displayed on startup screen. User: Use stored picture from "Logo Capture" function. For successful logo capture, please ensure that the onscreen image does not exceed the projector time the projector is - Optoma TX565UT-3D | User Manual - Page 43
the OSD menu, the new setting will take effect on next open. On: Assign an IP address to the projector from an external DHCP server automatically. Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. Gateway Select the default gateway of the - Optoma TX565UT-3D | User Manual - Page 44
to use web browser to control your projector 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. 4. Based 15 15 (N/A) 15 15 When you used the projector IP address, you will can not link to your service server. English 44 - Optoma TX565UT-3D | User Manual - Page 45
connection from your computer to the projector Step 1: Find an IP Address (192.168.0.100) from LAN function of projector. Step 2: Select apply and Area Network (LAN) Setting dialog box appears, In the Proxy Server area, cancel the Use a proxy server for your LAN check box., then click "OK" button - Optoma TX565UT-3D | User Manual - Page 46
on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projector's online status, system power, lamp life, network setting and hardware faults, image) 1. Main Screen 2. Edit Room Crestron RoomView function support is dependent on models. English 46 - Optoma TX565UT-3D | User Manual - Page 47
3. Edit Attribute User Controls 4. Edit Event For more information, please visit http://www.crestron.com & www.crestron.com/getroomview. 47 English - Optoma TX565UT-3D | User Manual - Page 48
Off: Choose "Off" to show the "searching" message. Keypad Lock When the keypad lock function is "On", the control panel will be locked however, the projector can be operated by the remote control. By selecting "Off", you will be able to reuse the control panel. Background Color Use this feature to - Optoma TX565UT-3D | User Manual - Page 49
User Controls Reset Dust Filter Choose "Yes" to show or "No" to hide the warning message when the changing filter message is displayed. Reset Choose "Yes" to return the display parameters on all menus to the factory default settings. 49 English - Optoma TX565UT-3D | User Manual - Page 50
Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min) Sets the countdown timer interval. The countdown timer - Optoma TX565UT-3D | User Manual - Page 51
hours before suggested replacement of lamp. When ambient temperature is over 35°C in operating, the projector will switch to STD automatically. Brightness Mode STD: Choose "STD" to dim the projector lamp which will lower power consumption and extend the lamp life. BRIGHT: Choose "BRIGHT" to - Optoma TX565UT-3D | User Manual - Page 52
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and securely - Optoma TX565UT-3D | User Manual - Page 53
" under the SP box; choose the resolution mode you need under the "Models" box. 8. Verify that notebook manufacturer to send signal out from notebook to projector. Example: [Fn]+[F4] Acer [Fn]+[F5 to be reactivated. Refer to your computer's manual for detailed information. Image is unstable or - Optoma TX565UT-3D | User Manual - Page 54
DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to 16:9 in the OSD. If you play 4:3 format DVD titles, please change the format to 4:3 in the projector OSD. If the image is still stretched, you will also need to - Optoma TX565UT-3D | User Manual - Page 55
makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section on - Optoma TX565UT-3D | User Manual - Page 56
±15° both horizontally and vertically of one of the IR receivers on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 7 m (±0°) of the projector. Make sure the batteries are inserted correctly. Replace batteries if they are - Optoma TX565UT-3D | User Manual - Page 57
please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least safety glasses if changing the bulb when ceiling mounted. "Caution must be used to prevent any loose parts from falling out of projector." Warning - Optoma TX565UT-3D | User Manual - Page 58
Appendices The screws on the 1 lamp cover and the 2 3 lamp cannot be removed. 4 The projector cannot be turned on if the lamp cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the - Optoma TX565UT-3D | User Manual - Page 59
If dust builds up on the filter is not cleaned, the When you see this message, please find following steps for projector will over- cleaning procedure: 2 heat and cause problems with the operation and shorten the life of 2 the product. 1 4 5 3 Cleaning the Dust Filter Procedure: 4 12 - Optoma TX565UT-3D | User Manual - Page 60
120 120 120Hz input signals may be 832 × 624 75 75 dependent on XGA 1024 × 768 60 60 graphics cards XGA 1024 × 768 70 70 support. Please note that XGA 1024 × 768 75 75 using resolutions XGA 1024 × 768 120 120 other than native 1152 × 870 75 75 1024 x 768 (XGA - Optoma TX565UT-3D | User Manual - Page 61
Appendices Computer Compatibility Mode MAC LC 13" MAC II 13" MAC 16" MAC 19" MAC MAC G4 i MAC DV i MAC DV Resolution 640 × 480 640 × 480 832 × 624 1024 × 768 1152 × 870 640 × 480 1024 × 768 1152 × 870 V-Sync (Hz) 66.66 66.68 74.55 75 75.06 60 75 75 H-Sync (KHz) 34.98 35.00 49.73 60.24 68.68 - Optoma TX565UT-3D | User Manual - Page 62
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments RS232 shell is grounded. 1 2 3 Pin no. 1 2 3 Spec. (from projector side) TXD RXD GND English 62 - Optoma TX565UT-3D | User Manual - Page 63
Projector Return (Fail): F Projector Return (Pass): P Projector Return (Fail): F XX=01ˀ99, projector's ID, XX=00 is for all projectors SEND to projector 30 32 30 20 33 0D Movie ~XX20 4 7E 30 30 32 Classroom ~XX20 9 7E 30 30 32 30 20 39 0D 3D ~XX21 n 7E 30 30 32 31 20 a 0D Brightness - Optoma TX565UT-3D | User Manual - Page 64
33 30 20 31 0D 3D Mode On ~XX230 0 7E 30 30 32 33 30 20 30 0D 3D Mode Off ~XX231 1 7E 30 30 32 33 31 20 31 0D 3D Sync Invert On ~XX231 37 38 20 32 0D Off (0/2 for backward compatible) ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39) ~XX80 1 7E 30 30 38 30 20 - Optoma TX565UT-3D | User Manual - Page 65
Appendices ~XX81 n 7E 30 30 38 31 20 a 0D Volume n = 0 (a=30) ~ 20 (a=32 30) ~XX82 1 7E 30 30 38 32 20 31 0D Logo Optoma ~XX82 2 7E 30 30 38 32 20 32 0D User ~XX83 1 7E 30 30 38 33 20 31 0D Logo Capture ~XX88 0 7E 30 30 - Optoma TX565UT-3D | User Manual - Page 66
Lamp Hours Running Out READ from projector 232 ASCII Code HEX Code Function Projector Return Description ~XX121 1 7E 20 31 0D Display Mode OKn n : 0/1/2/3/4/5/6/7/8 = None/Presentation/Bright/Movie/sRGB/ User/Blackboard/Classroom/3D ~XX124 1 7E 30 30 31 32 34 20 31 0D Power - Optoma TX565UT-3D | User Manual - Page 67
Appendices Wall Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Please note that damage - Optoma TX565UT-3D | User Manual - Page 68
service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada www.optoma.ca 888-289-6786 510-897-8601 services@optoma - Optoma TX565UT-3D | User Manual - Page 69
, Cheung Sha Wan, Kowloon, Hong Kong [email protected] www.os-worldwide.com +886-2-2218-2360 +886-2-2218-2313 [email protected] asia.optoma.com +852-2396-8968 +852-2370-1222 www.optoma.com.hk China 5F, No. 1205, Kaixuan Rd., Changning District Shanghai, 200052, China +86-21-62947376 +86-21 - Optoma TX565UT-3D | User Manual - Page 70
& Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no - Optoma TX565UT-3D | User Manual - Page 71
2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
6
Package Overview
..............................
6
Product Overview
...............................
7
Main Unit
..............................................
7
Control Panel
.......................................
8
Input/Output Connections
....................
9
Remote Control
..................................
10
Installation
.....................................
11
Connecting the Projector
..................
11
Removing and Attaching the
Cable Cover
.......................................
11
Connect to Computer/Notebook
........
12
Connect to Video Sources
.................
13
Powering the projector On / Off
........
14
Powering On the Projector
.................
14
Powering Off the Projector
.................
15
Warning Indicator
...............................
15
Adjusting the Projected Image
..........
16
Adjusting the Projector’s Height
........
16
Adjusting the Projector’s Focus
.........
17
Adjusting Projection Image Size
........
17
User Controls
................................
19
Control Panel & Remote Control
......
19
Control Panel
.....................................
19
Remote Control
..................................
20
On-screen Display Menus
................
25
How to operate
.................................
25
Menu Tree
..........................................
26
IMAGE
...............................................
28
IMAGE | Advanced
............................
30
DISPLAY
............................................
32
DISPLAY | 3D
...................................
35
SETUP
...............................................
36
SETUP | Signal (RGB)
.......................
39
SETUP | Security
...............................
40
SETUP | Advanced
............................
42
SETUP | Network
...............................
43
OPTIONS
...........................................
48
OPTIONS | Advanced
........................
50
OPTIONS | Lamp Settings
.................
51
Appendices
....................................
52
Troubleshooting
................................
52
Replacing the lamp
...........................
57
Replacing and cleaning the
dust filter
...........................................
59
Compatibility Modes
.........................
60
Computer Compatibility
.....................
60
Video Compatibility
............................
61
RS232 Commands and Protocol
Function List
.....................................
62
RS232 Pin Assignments
....................
62
RS232 Protocol Function List
............
63
Wall Mount Installation
......................
67
Optoma Global Offices
.....................
68
Regulation & Safety Notices
.............
70
Table of Contents