Optoma TX635-3D User's Manual
Optoma TX635-3D Manual
 |
View all Optoma TX635-3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma TX635-3D manual content summary:
- Optoma TX635-3D | User's Manual - Page 1
the Projector's Zoom / Focus 16 Adjusting Projection Image Size......... 16 User Controls 18 Control Panel & Remote Control.......18 Control Panel 18 Remote Control 19 On-screen Display Menus 24 How to operate 24 Menu Tree 25 IMAGE 27 IMAGE | Advanced 29 DISPLAY 31 DISPLAY | 3D 34 - Optoma TX635-3D | User's Manual - Page 2
to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma TX635-3D | User's Manual - Page 3
recommended in this user's guide. ▀■ Warning- Do not look into the projector's lens when cool down. Follow instructions as described on pages 69-70. ▀■ Warning- This projector will detect the on the screen. Please contact your local reseller or service center to change the lamp as soon under " - Optoma TX635-3D | User's Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the - Optoma TX635-3D | User's Manual - Page 5
your back to the beam as much as possible. ▀■ When projector is used in a classroom, adequately supervise students when they are room blinds to reduce ambient light levels. Product Features Monitor loop through only support in VGA1-In/ YPbPr. ▀■ SVGA (800x600) Native resolution / XGA (1024x768) - Optoma TX635-3D | User's Manual - Page 6
is missing, please contact your nearest customer service center. Projector Power Cord VGA Cable Due to different applications in each country, some regions may have different accessories. 2 × AAA Batteries Documentation : User's Manual Warranty Card Quick Start Card WEEE Card - Optoma TX635-3D | User's Manual - Page 7
Introduction Product Overview Main Unit 4 1 10 11 6 5 10 3 2 The interface is subject to model's specifications. 7 Do not block projector in/out air vents. 8 9 1. Control Panel 2. Focus Ring 3. Speaker 4. Zoom Ring 5. Lens 6. IR Receiver 7. Input / Output Connections 8. Power - Optoma TX635-3D | User's Manual - Page 8
Introduction Control Panel 14 2 3 10 / 5 9 6 / 8 7 1. Power LED 2. Lamp LED 3. Temp LED 4. Enter / Help 5. Menu 6. Re-Sync 7. Keystone Correction 8. Four Directional Select Keys 9. Source 10. Power/Standby button English 8 - Optoma TX635-3D | User's Manual - Page 9
1 2 Introduction Input/Output Connections 3 4 5 6 7 8 C (SERVICE) 15 14 13 12 11 10 9 1. USB Connector (Connect to PC for Remote Mouse func- tion) 2. HDMI Connector 3. RS-232 Connector (9-pin DIN Type) 4. VGA- - Optoma TX635-3D | User's Manual - Page 10
9. Mouse Right Click 10. Page Up 11. Page Down 10 12. Volume +/13. Menu 11 14. Zoom 12 15. AV mute 16. Video 13 17. 3D 14 18. VGA1 19. USB 15 20. Laser Pointer 16 21. Keystone +/- 22. Brightness 17 23. HDMI 18 24. VGA2 19 25. Eco+ 26. Numbered - Optoma TX635-3D | User's Manual - Page 11
Installation Connecting the Projector Connect to Computer/Notebook The interface is subject to model's specifications. , some regions may have different accessories. (*) Optional accessory E62405SP R C (SERVICE) 8 1...Power Cord 2...*USB Cable 3 DVI/HDMI Cable 4 RS232 Cable 5...VGA - Optoma TX635-3D | User's Manual - Page 12
Video Sources DVD Player, Set-top Box, HDTV receiver Audio Output The interface is subject to 1 model's specifi- cations. 4 2 8 5 3 C (SERVICE) 6 R E62405SP Composite Video Output 7 Due to the difference in applications for each country, some regions may have different accessories - Optoma TX635-3D | User's Manual - Page 13
When Power mode (Standby) is set to Eco ( - Optoma TX635-3D | User's Manual - Page 14
When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the nearest service center if the "LAMP" LED indicator is lit red and if "POWER/STANDBY" indicator flashes amber. projector displays these symptoms. See pages 80-81 for more information - Optoma TX635-3D | User's Manual - Page 15
for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring - Optoma TX635-3D | User's Manual - Page 16
zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. SVGA/XGA/WXGA series: The projector will focus at dis- tances from 3.94 to 32.8 feet (1.2 to 10.0 meters). Zoom Ring Focus Ring Adjusting Projection Image Size SVGA/XGA series: Projection - Optoma TX635-3D | User's Manual - Page 17
00 307.00 6.24 4.68 245.60 184.20 This table is for user's reference only. Projection Distance (D) (m) (feet) wide tele wide tele 0.98 .40 159.00 7.80 4.87 306.98 191.86 This table is for user's reference only. Projection Distance (D) (m) (feet) wide tele wide tele 1.00 1. - Optoma TX635-3D | User's Manual - Page 18
User Controls Control Panel & Remote Control Control Panel / / Using the Control Panel POWER RE-SYNC Refer to the "Power On/Off the Projector" section on pages 13-14. Automatically synchronize the projector to the input source. Enter / Help Confirm your item selection. / H elp Menu (only - Optoma TX635-3D | User's Manual - Page 19
User Controls Remote Control Using the Remote Control Power Refer to the "Power On/Off the Projector" section on pages 13-14. L the projector. Volume +/- Adjust to increase / decrease the volume. Brightness 3D Menu HDMI Adjust the brightness of the image. Press the "3D" to turn the 3D OSD - Optoma TX635-3D | User's Manual - Page 20
User Controls Using the Remote Control Freeze Press "Freeze" to pause the screen to turn on the mouse function. For the mouse function to work, USB cable must be connected between the projector and computer. Zoom in on an image. Press buttons to alter zoom. When Eco+ mode is activated, the - Optoma TX635-3D | User's Manual - Page 21
User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the " / " button on the control panel to open the Help Menu. / / 21 English - Optoma TX635-3D | User's Manual - Page 22
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 64-68 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 22 - Optoma TX635-3D | User's Manual - Page 23
User Controls 23 English - Optoma TX635-3D | User's Manual - Page 24
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use - Optoma TX635-3D | User's Manual - Page 25
Timer Change Password Exit Settings Presentation / Bright / Movie / sRGB / Blackboard / Classroom / User / 3D -50~50 -50~50 1~15 -50~50 / AUTO 0~10 -5~25 (80%~200%) -50~50 -50~50 -40~40 On / Off Off / DLP-Link / IR On / Off English / Deutsch / Français / Italiano / Español / Português / Svenska - Optoma TX635-3D | User's Manual - Page 26
Settings 0~99 On / Off 0~10 0~10 Default / Audio1 / Audio2 Default / Neutral / User Off / CC1 / CC2 Yes / No On / Off On / Off On / Off On according to the signal type selected and the projector model you are using. (#1) "Color" and "Tint" are only supported in Video mode. (#2) For XGA model - Optoma TX635-3D | User's Manual - Page 27
input. Movie: For home theater. sRGB: Standardised accurate color. Blackboard: This mode should be selected to achieve optimum color settings when projecting onto a blackboard (green). Classroom: This mode is recommended for projecting in a classroom. User: User's settings. 3D: Recommend - Optoma TX635-3D | User's Manual - Page 28
User Controls "Color" and "Tint" functions are only supported under Video mode. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video - Optoma TX635-3D | User's Manual - Page 29
User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the input. Film: for home theater. Video: for video or TV source. Graphics: for image source. Standard: for PC or computer source. BrilliantColor™ - Optoma TX635-3D | User's Manual - Page 30
User Controls (*) For HDMI only. Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0-255)(*),RGB to enter the sub menu and select which sources you require. Press "Enter" to finalize the selection. The projector will not search for inputs that are not selected. English 30 - Optoma TX635-3D | User's Manual - Page 31
User Controls DISPLAY Format Use this function to choose your desired aspect ratio. SVGA/XGA 4:3: This format is for 4×3 input sources. 16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV and DVD enhanced for Wide screen TV. (480i/p) Native: This - Optoma TX635-3D | User's Manual - Page 32
is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV. 16:10: This format is for 16×10 input sources, like widescreen laptops. LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to display 2.35:1 aspect ratio using full resolution - Optoma TX635-3D | User's Manual - Page 33
User Controls Each I/O has different setting of "Edge mask". "Edge mask" and "Zoom" can't work at same time. Edge Mask Edge mask function removes the noise - Optoma TX635-3D | User's Manual - Page 34
User Controls DISPLAY | 3D "IR" options may vary according to model. "3D Sync Invert" is only available when 3D is enabled and this mode 3D is for DLP link glass only. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. 3D Mode O ff: Select "Off" to - Optoma TX635-3D | User's Manual - Page 35
User Controls SETUP "SETUP" options may vary according to model. Language Choose the multilingual OSD menu. Press or into the sub menu and then use the - Optoma TX635-3D | User's Manual - Page 36
the menu location on the display screen. Screen Type Choose the screen type from16:10 or 16:9. Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Refer to pages 74-78 for the complete list of RS232 commands. Mute Choose the - Optoma TX635-3D | User's Manual - Page 37
Phase, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the - Optoma TX635-3D | User's Manual - Page 38
User Controls SETUP | Security Password default value is "1234" (first time). Security On: Choose "On" to use security verification when the turning on the projector. Off: Choose "Off" to be able to switch on the projector without password verification. Security Timer Use this function to - Optoma TX635-3D | User's Manual - Page 39
User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. 39 English - Optoma TX635-3D | User's Manual - Page 40
projector is powered on. Default: The default startup screen. Neutral: Logo is not displayed on startup screen. User : Use stored picture from "Logo Capture" function. For successful logo capture, please ensure that the onscreen image does not exceed the projector time the projector is - Optoma TX635-3D | User's Manual - Page 41
User Controls SETUP | Network Network State Display the network connection status. effect on next open. On: Assign an IP address to the projector from an external DHCP server automatically. Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. - Optoma TX635-3D | User's Manual - Page 42
User Controls How to use web browser to control your projector 1. Turn on DHCP to allow the DHCP server to automatically assign an ip address or keep DHCP off to manually enter the network information 2. Then choose apply and press " " button to complete the configuration process. 3. Open your web - Optoma TX635-3D | User's Manual - Page 43
User Controls Below is an example on how to do a quick network setup Step for your LAN check box., then click "OK" button twice. Step 8: Connect a cat5 cross-over network cable between the projector and the computer. Step 9: Open your IE and type in the IP address of 192.168.0.100 in the URL then - Optoma TX635-3D | User's Manual - Page 44
of IP ID and IP address). Crestron RoomView monitors each projector, including projector's online status, system power, lamp life, network setting and the software for all users. (Operation UI as following image) 1. Main Screen 2. Edit Room Crestron RoomView function support is dependent on models - Optoma TX635-3D | User's Manual - Page 45
3. Edit Attribute User Controls 4. Edit Event For more information, please visit http://www.crestron.com & www.crestron.com/getroomview. 45 English - Optoma TX635-3D | User's Manual - Page 46
User Controls OPTIONS To turn off the keypad lock, press and hold "Enter" key on top of the projector for 5 seconds. English 46 Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High - Optoma TX635-3D | User's Manual - Page 47
powered on again, if selected within a period of 100 seconds. Off: The fan will start cooling the system immediately when user turns off the projector. Power Mode (Standby) Eco.: Choose "Eco." to save power dissipation further < 0.5W. Active: Choose "Active" to return to normal standby - Optoma TX635-3D | User's Manual - Page 48
User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time 30 hours before suggested replacement of lamp. When ambient temperature is over 40°C in operating, the projector will switch to Eco automatically. Brightness Mode BRIGHT: Choose "BRIGHT" to increase the brightness. - Optoma TX635-3D | User's Manual - Page 49
. Base on network protocol, user can configure the projector remotely. It supports to connect the PC with Projector by USB, Ethernet, and • Card Reader • Optoma Presenter How to use Web Administration The Web Administration application allows user to configure the projector remotely via widely used - Optoma TX635-3D | User's Manual - Page 50
User Controls 2 There are 3 options in this page. • C lick "Download", it displays the interface to download the software of "space". System Status This selection allows you to see current network and firmware status of the projector. General Setup Admin password can be changed here. English 50 - Optoma TX635-3D | User's Manual - Page 51
• Alert Type:This selection allows the admin to receive alerts when the projector is at fault. • S MTP setting and Email setting:This page is to set up the details of mail sending, ex. mail server IP address, user name, password and mail address of receivers. (Note: Multi-receivers are separated - Optoma TX635-3D | User's Manual - Page 52
User Controls • IP Setup: Click "Obtain an IP address automatically" as auto mode; IP, Subnet Mask, Default Gateway, DNS server. • Wireless Setup: This allows you to setup the projector as an access point or as a client that can be integrated to an existing network. Presenter Setup Admin password - Optoma TX635-3D | User's Manual - Page 53
User Controls • C onference Control: Click "On" or "Off" to enable/disable conference control mode Click "Power" to control power on/off of projector. Click "Vol-, Mute, Vol+" to control volume. In the SourceList, it includes all sources that the projector can process. Click "Menu" to open menu; - Optoma TX635-3D | User's Manual - Page 54
: English 54 • Crestron Control: the basic network information of the control system device. • Projector: the ID of each projector in a building for Administrator to control. • User Password: change user's password. • Default Language: set the default language. • DHCP: enable/disable DHCP and - Optoma TX635-3D | User's Manual - Page 55
User Controls Click "Help" to inform administrator to do related protection or operation. Reset to Default Click "Apply" to reset system to the default settings. Click "Flash Upgrade" to upgrade the Firmware from USB disk, which has been inserted in projector. Reboot System Click "Reboot" to reboot - Optoma TX635-3D | User's Manual - Page 56
User Controls How to use Multi-media Card Reader Application The Card Reader application can display packaged images in a USB flash device. 1. Plugging the USB device into USB port of projector, source of Flash Drive is detected, and then USB Flash Devices Detection Screen is displayed. It supports - Optoma TX635-3D | User's Manual - Page 57
original size ratio. 2-1. Setup Menu When you highlight on and press "Enter" button, enter into Setup menu. The following buttons are supported in the user interface: • Thumbnail Order: Enter the Thumbnail Display Mode. • Slideshow: Enter the Slide Show Mode. Timer: Use this function to set - Optoma TX635-3D | User's Manual - Page 58
Enter key: Show the controls bar. Menu key: Show the projector menu. • : Go back to thumbnail file browsing. Press Left/Right file, it will display PDF document as full mode. The following buttons are supported in the user interface: : Back to Thumbnail file browsing. : Hidden - Optoma TX635-3D | User's Manual - Page 59
Window XP, Vista, Win7, Win7 1-2.Using Optoma Presenter via mini Wifi USB dongle (32/64bit), Mac OS 1-2-1. Insert mini Wifi USB dongle into projector's USB port. 10.5, Mac OS 10.6. Keyboard mouse function only supports Network Display source. C (SERVICE) User must be administrator login - Optoma TX635-3D | User's Manual - Page 60
User Controls 1-2-2. P ower on projector. Default SSID for wireless is Network Display. / / 1-2-3. C onnect to Mini WiFi USB Dongle SSID "Network Display" from your PC device. 1 2 3 1-2-4. D ownload and Install Optoma Presenter Software. 2. After installation in PC, double click the - Optoma TX635-3D | User's Manual - Page 61
or Click "Search" button to search the projectors on network and select projectors to connect. 2-1-2. Input "User type" and "Password" in log-in interface. 2-1-3. After log-in, Optoma Presenter will modify PC resolution to Network Application supported resolution. 2-2. Click the button to select - Optoma TX635-3D | User's Manual - Page 62
is supported in one on one connection between pc and computer. When audio out is enabled, video image quality setting will be greyed out. To get the higher image quality, please set quality to high, and set audio out to "No". 2-4. C lick the button to control all the users and all the projectors - Optoma TX635-3D | User's Manual - Page 63
User Controls The quality of the image via network connection depends upon total bandwidth available in the network. • : For the other PCs. • : For the current PC. • : - Optoma TX635-3D | User's Manual - Page 64
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and securely - Optoma TX635-3D | User's Manual - Page 65
keys listed below for your notebook manufacturer to send signal out from notebook to projector. Example: [Fn]+[F4] Acer [Fn]+[F5] Asus [Fn]+[F8 Each has a different way to be reactivated. Refer to your computer's manual for detailed information. Image is unstable or flickering Use "Phase" - Optoma TX635-3D | User's Manual - Page 66
title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to 16:9 in the OSD. If Keystone +/-" button on the remote control or press " / " on the projector panel, until the sides are vertical. Image is reversed Select "SETUP - Optoma TX635-3D | User's Manual - Page 67
Check that "Keypad Lock" is not activated by trying to control the projector with the remote control. Lamp burns out or makes a popping sound When burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the - Optoma TX635-3D | User's Manual - Page 68
±15° both horizontally and vertically of one of the IR receivers on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 7 m (±0°) of the projector. Make sure the batteries are inserted correctly. Replace batteries if they are - Optoma TX635-3D | User's Manual - Page 69
please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at wear safety glasses if changing the bulb when ceiling mounted. "Caution must be used to prevent any loose parts from falling out of projector." Warning - Optoma TX635-3D | User's Manual - Page 70
Appendices The screws on the lamp cover and the lamp cannot be 4 removed. The projector cannot be turned on if the lamp cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the - Optoma TX635-3D | User's Manual - Page 71
is dependent on Notebook/PC models. 120Hz input signals may be dependent on graphics cards support. Please note that using resolutions other than native 800 x 1024 (SVGA), 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result in some loss of - Optoma TX635-3D | User's Manual - Page 72
Appendices English 72 Mode XGA XGA XGA HD720 HD720 HD720 HD720 HD720 WXGA WXGA WXGA WXGA WXGA-800 SXGA SXGA SXGA SXGA+ UXGA HDTV HDTV HDTV HDTV HDTV HDTV Resolution Anglog/Digital H-Sync (KHz) V-Sync (Hz) SVGA/ XGA WXGA 1024 × 768 60.00 75 V V 1024 × 768 68.70 85 V 1024 × 768 - 120 - Optoma TX635-3D | User's Manual - Page 73
Appendices Mode SDTV SDTV SDTV SDTV SDTV SDTV Resolution Anglog/Digital H-Sync (KHz) V-Sync (Hz) SVGA/ XGA WXGA 720 × 576 720 × 576i 720 × 576p 720 × 480 720 × 480i 720 × 480p 31.30 - 31.50 - 50 V 50 V V 50 V V 60 V 60 V V 60 V V Computer Compatibility Mode MAC LC 13" MAC - Optoma TX635-3D | User's Manual - Page 74
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments RS232 shell is grounded. 9876 54321 Pin no. 1 2 3 4 5 6 7 8 9 Spec. (from projector side) N/A RXD TXD N/A GND N/A N/A N/A N/A English 74 - Optoma TX635-3D | User's Manual - Page 75
command no matter what ID projector has. eg: telnet with ~0004 1 can execute Freeze function but ~3804 1 can't. SEND to projector (telnet supported) 232 ASCII Code HEX Code 30 20 33 0D Movie ~XX20 4 7E 30 30 32 30 20 34 0D sRGB ~XX20 5 7E 30 30 32 30 20 35 0D User ~XX20 7 7E 30 - Optoma TX635-3D | User's Manual - Page 76
30 32 33 30 20 31 0D 3D Mode IR ~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link ~XX230 0 7E 30 30 32 33 30 20 30 0D 3D Mode Off (0/2 for backward compatible) ~ ~9999 (a=7E 39 39 39 39) ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39) English 76 - Optoma TX635-3D | User's Manual - Page 77
39 20 33 0D Audio2 ~XX82 1 7E 30 30 38 32 20 31 0D Logo Default ~XX82 2 7E 30 30 38 32 20 32 0D User ~XX82 3 7E 30 30 38 32 20 33 0D Neutral ~XX83 1 7E 30 30 38 33 20 31 0D Logo Capture ~XX88 0 7E 30 30 - Optoma TX635-3D | User's Manual - Page 78
Cover Open READ from projector (telnet supported) 232 ASCII Code HEX Code Function Projector Return Description ~XX121 20 31 0D Display Mode OKn n : 0/1/2/3/4/5/7/8/9 = None/Presentation/Bright/Movie/sRGB/User/ Blackboard/Classroom/3D ~XX124 1 7E 30 30 31 32 34 20 31 0D Power - Optoma TX635-3D | User's Manual - Page 79
Appendices Wall Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Please note that damage - Optoma TX635-3D | User's Manual - Page 80
service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada www.optoma.ca 888-289-6786 510-897-8601 services@optoma - Optoma TX635-3D | User's Manual - Page 81
Latin America 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com +31 (0) 36 820 0253 +31 (0) 36 548 9052 www.optoma.nl 888-289-6786 510-897-8601 [email protected] Korea WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, seoul,135-815, KOREA +82+2+34430004 +82+2+34430005 Japan - Optoma TX635-3D | User's Manual - Page 82
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this projector. English 82 - Optoma TX635-3D | User's Manual - Page 83
including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES- R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
6
Package Overview
..............................
6
Product Overview
...............................
7
Main Unit
..............................................
7
Control Panel
.......................................
8
Input/Output Connections
....................
9
Remote Control
..................................
10
Installation
.....................................
11
Connecting the Projector
..................
11
Connect to Computer/Notebook
........
11
Connect to Video Sources
.................
12
Powering the projector On / Off
........
13
Powering On the Projector
.................
13
Powering Off the Projector
.................
14
Warning Indicator
...............................
14
Adjusting the Projected Image
..........
15
Adjusting the Projector’s Height
........
15
Adjusting the Projector’s Zoom /
Focus
.................................................
16
Adjusting Projection Image Size
........
16
User Controls
................................
18
Control Panel & Remote Control
......
18
Control Panel
.....................................
18
Remote Control
..................................
19
On-screen Display Menus
................
24
How to operate
.................................
24
Menu Tree
..........................................
25
IMAGE
...............................................
27
IMAGE | Advanced
............................
29
DISPLAY
............................................
31
DISPLAY | 3D
...................................
34
SETUP
...............................................
35
SETUP | Signal (RGB)
.......................
37
SETUP | Security
...............................
38
SETUP | Advanced
............................
40
SETUP | Network
...............................
41
OPTIONS
...........................................
46
OPTIONS | Advanced
........................
47
OPTIONS | Lamp Settings
.................
48
Network Application System
Introduction
.......................................
49
How to use Web Administration
........
49
How to use Multi-media Card Reader
Application
.........................................
56
How to use the Optoma Presenter
System
...............................................
59
Appendices
....................................
64
Troubleshooting
................................
64
Replacing the lamp
...........................
69
Compatibility Modes
.........................
71
Computer Compatibility
.....................
71
Video Compatibility
............................
73
RS232 Commands and Protocol
Function List
.....................................
74
RS232 Pin Assignments
....................
74
RS232 Protocol Function List
............
75
Wall Mount Installation
......................
79
Optoma Global Offices
.....................
80
Regulation & Safety Notices
.............
82
Table of Contents