Optoma UHZ65LV UHZ65LV UM

Optoma UHZ65LV Manual

Optoma UHZ65LV manual content summary:

  • Optoma UHZ65LV | UHZ65LV UM - Page 1
    DLP® Projector User manual
  • Optoma UHZ65LV | UHZ65LV UM - Page 2
    TABLE OF CONTENTS SAFETY 4 Important Safety Instruction...4 Laser Radiation Safety Information 5 3D Safety Information...6 Copyright...6 Disclaimer...6 Trademark Recognition...7 FCC...7 Declaration of Conformity for EU countries 8 WEEE...8 INTRODUCTION 9 Package Overview...9 Standard accessories
  • Optoma UHZ65LV | UHZ65LV UM - Page 3
    menu...41 Setup power settings menu...41 Setup security menu...42 Setup test pattern menu...42 Setup remote settings menu...42 Setup projector ID ceiling mount installation 57 IR remote codes...58 Troubleshooting...62 Warning indicators...64 Specifications...66 Optoma global offices...67 English 3
  • Optoma UHZ65LV | UHZ65LV UM - Page 4
    important operating and maintenance (servicing) instructions in the literature accompanying the recommended in this user's guide. Important Safety Instruction ‡‡ Do not block service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma
  • Optoma UHZ65LV | UHZ65LV UM - Page 5
    4 laser module. Disassembly or modification is very dangerous and should never be attempted. ‡‡ Any operation or adjustment not specifically instructed by the user's guide creates the risk of hazardous laser radiation exposure. ‡‡ Do not open or disassemble the projector as htis may cause damage by
  • Optoma UHZ65LV | UHZ65LV UM - Page 6
    ‡ ‡ IEC 60825-1: 2014 Class 1 RG2 IEC 62471-5:2015 RG2 ‡‡ Additional instructions to supervise children, no staring, and not use optical aids. ‡‡ Additional instructions to install above the reach of children. ‡‡ Notice is given to supervise children and to never allow them to stare into the
  • Optoma UHZ65LV | UHZ65LV UM - Page 7
    other product names used in this manual are the properties of their respective owners and are Acknowledged. FCC This device has been tested and found to comply with and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
  • Optoma UHZ65LV | UHZ65LV UM - Page 8
    numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries ‡‡ EMC Directive 2014/30/EU (including ‡‡ RED 2014/53/EU (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To
  • Optoma UHZ65LV | UHZ65LV UM - Page 9
    is shipped with the battery. *For European warranty Information, please visit www.optoma.com.  Warranty Card*  Basic User Manual  Paper UM Documentation Optional accessories Lens cap CD user manual Carry bag Note: ‡‡ Optional accessories vary depending on model, specification and region
  • Optoma UHZ65LV | UHZ65LV UM - Page 10
    INTRODUCTION Product Overview 1 23 4 5 7 6 89 5 4 10 11 11 Note: ‡‡ ‡‡ Do not block projector intake and exhaust vents. When operating the projector in an enclosed space, allow at least 30 cm clearance around the intake and exhaust vents. No Item 1. Top Cover 2. Focus Ring 3. Lens
  • Optoma UHZ65LV | UHZ65LV UM - Page 11
    (*1;*3) 7. VGA Connector No Item 8. AUDIO IN Connector 9. 12V OUT Connector 10. Service Connector (*2) 11. S/PDIF Connector 12. USB Power Out (5V 1.5A) (*3) 13. AUDIO OUT Connector (*1)HDMI 2 connector supports HDCP2.2 and MHL V2.2. (*2)For firmware upgrade. (*3)MHL and USB DC5V are
  • Optoma UHZ65LV | UHZ65LV UM - Page 12
    INTRODUCTION Keypad 1 2 3 4 8 7 No Item 1. Power and On/Standby LED 2. Source 3. Menu 4. Enter 6 5 No Item 5. Re-Sync 6. Four Directional Select Keys 7. Laser LED 8. Temp LED 12 English
  • Optoma UHZ65LV | UHZ65LV UM - Page 13
    ) 13. VGA 14. S-Video 15. HDBase-T 16. Video 17. BNC (not supported) No Item 18. YPbPr (not supported) 19. Numeric keypad (0-9) 20. Display port (not supported) 21. 3D 22. DVI (not supported) 23. HDMI3 (not supported) 24. HDMI1 25. HDMI2 26. Remote ID / Remote all 27. Digital Zoom
  • Optoma UHZ65LV | UHZ65LV UM - Page 14
    YPbPr 26 13 27 No Item 1. Power On 2. User 2 3. User 1 4. Brightness 5. Keystone (not supported) 6. Mute 7. DB (Dynamic Black) 8. Source 9. Enter 10. Menu 11. HDMI1 12. VGA1 13. VGA2 (not supported) 14. Power Off No Item 15. User 3 16. Contrast 17. Display Mode 18. Aspect
  • Optoma UHZ65LV | UHZ65LV UM - Page 15
    will invalidate the warranty and may shorten the lifetime of the projector light source or the projector itself. For none standard installation advise please contact Optoma. English 15
  • Optoma UHZ65LV | UHZ65LV UM - Page 16
    SETUP AND INSTALLATION Projector installation notice ‡‡ Allow at least 30 cm clearance around the exhaust vent. Minimum 100mm (3.94 inches) Minimum 300mm (11.81 inches) Minimum 300mm (11.81 inches) Minimum 100mm (3.94 inches) Minimum 100mm (3.94 inches) Minimum 100mm (3.94 inches) ‡‡ Ensure
  • Optoma UHZ65LV | UHZ65LV UM - Page 17
    sources to the projector 3 4 5 1 2 6 MOLEX AC-IN RJ-45 RS232 HDMI v1.4 HDMI 1 HDMI v2.0 4K/MHL HDMI 2 VGA 11 AUDIO IN AUDIO OUT SERVICE 12V OUT USB POWER OUT (5V 1.5A) S / PDIF 12 14 13 10 9 7 8 MOLEX No Item 1. HDMI Cable 2. HDMI / MHL Cable 3. RCA Component Cable 4. VGA
  • Optoma UHZ65LV | UHZ65LV UM - Page 18
    SETUP AND INSTALLATION Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or
  • Optoma UHZ65LV | UHZ65LV UM - Page 19
    SETUP AND INSTALLATION ‡‡ To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and legible. Focus Ring Focus adjustment Note: The projector will focus at a distance of 1.3m to 9.3m. English 19
  • Optoma UHZ65LV | UHZ65LV UM - Page 20
    the same or equivalent type batteries. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. ‡‡ Do not mix batteries of different types. Different types of batteries have different characteristics. ‡‡ Do not mix old and new batteries
  • Optoma UHZ65LV | UHZ65LV UM - Page 21
    SETUP AND INSTALLATION Approx. ±15° Approx. ±15° English 21 Off On PIP/PBP GeoCmoerrtreicction F2 AV Mute F1 Mode ENTER Re-Sync InfSoo. urce F3 Volume D Zoom Menu Format FVreGeAze1SH-DVBidRaeseeoIm42DToHVtDiedMeIo1A53llHYPDDbVMPII2r86DHisDpMlayI3P9ort 3D 0 BNC 7 Off On PIP/PBP
  • Optoma UHZ65LV | UHZ65LV UM - Page 22
    USING THE PROJECTOR Powering on / off the projector or On Off Geometric Correction PIP/PBP F1 Mode F2 AV Mute ENTER On Off Info. Source Geometric Correction PIP/PBP F1 Mode F2 AV Mute Re-Sync F3 ENTER Volume Info. Source Volume D Zoom Re-Sync F3 D Zoom Lens cap Menu Menu
  • Optoma UHZ65LV | UHZ65LV UM - Page 23
    USING THE PROJECTOR On Off Geometric Correction PIP/PBP Selecting an input source F1 F2 Mode AV Mute Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources
  • Optoma UHZ65LV | UHZ65LV UM - Page 24
    automatically save the new settings. Sub Menu Settings Display Main Menu Image Settings 3D Aspect Ratio Edge Mask Digital Zoom Image Shift Select Exit Navigation guide Enter 24 English
  • Optoma UHZ65LV | UHZ65LV UM - Page 25
    USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Display Mode Display Wall Color Image Settings HDR/HLG HDR Picture Mode Dynamic Range Brightness Contrast Sharpness Color Tint HLG Picture Mode Sub Menu 4 Values Presentation [Default] Bright HDR HLG Note: HLG
  • Optoma UHZ65LV | UHZ65LV UM - Page 26
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Gamma Sub Menu 3 Film Video Graphics Standard(2.2) 1.8 2.0 2.4 2.6 3D Blackboard DICOM SIM. BrilliantColorTM Color Temperature Sub Menu 4 Color Gamut Display Image Settings Color Color Settings CMS x offset y offset Brightness Reset RGB
  • Optoma UHZ65LV | UHZ65LV UM - Page 27
    USING THE PROJECTOR Main Menu Display Sub Menu Sub Menu 2 Sub Menu 3 Color Settings Color Space Signal Automatic Frequency Phase H. Position V. Position UltraDetail Image Settings Brightness Mode PureContrast PureColor PureEngine PureMotion Reset PureMotion Demo Sub Menu 4 Values
  • Optoma UHZ65LV | UHZ65LV UM - Page 28
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 3D Mode Sub Menu 3 3D Sync Invert 3D 3D Format Display Aspect Ratio Edge Mask Digital Zoom H Image Shift V Internal Speaker Audio Mute Volume Audio Input Audio Out HDMI HDMI/MHL Setup Projection Filter Settings Filter Usage Hours
  • Optoma UHZ65LV | UHZ65LV UM - Page 29
    Power Off (min.) Power Settings Sleep Timer (min.) Always On Power Mode (Standby) Security Security Security Timer Change Password Month Day Hour Test Pattern IR Function Remote Settings [depends on remote] F1 Sub Menu 4 Values Off 300hr 500hr [Default] 800hr 1000hr Cancel [Default] Yes
  • Optoma UHZ65LV | UHZ65LV UM - Page 30
    Setup Language Options Menu Settings Menu Location Menu Timer Auto Source Input Source Sub Menu 4 Values Test Pattern Brightness Contrast Sleep Timer Color Temp Gamma Projection MHL Test Pattern Brightness Contrast Sleep Timer Color Temp Gamma Projection MHL 00 ~ 99 On Off English [Default
  • Optoma UHZ65LV | UHZ65LV UM - Page 31
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 High Altitude Display Mode Lock Keypad Lock Sub Menu 3 Setup Options Information Hide Logo Background Color Reset LAN Network Control Reset OSD Reset to Default Network Status MAC Address DHCP IP Address Subnet Mask Gateway DNS Reset
  • Optoma UHZ65LV | UHZ65LV UM - Page 32
    USING THE PROJECTOR Main Menu Info Sub Menu Sub Menu 2 Regulatory Serial Number Source Resolution Refresh Rate Display Mode Power Mode (Standby) Light Source Hours Network Status IP Address Projector ID Color Depth Color Format Filter Usage Hours Brightness Mode FW Version System LAN MCU Sub
  • Optoma UHZ65LV | UHZ65LV UM - Page 33
    High Dynamic Range (HDR) setting and its effect when displaying video from 4K Blu-ray players and streaming devices. Note: HDMI1 and VGA do not support Dynamic Range.  HDR/HLG ‡‡ Off: Turn off HDR or HLG processing. When set to Off, the projector will NOT decode HDR or HLG content. ‡‡ Auto
  • Optoma UHZ65LV | UHZ65LV UM - Page 34
    USING THE PROJECTOR  HLG Picture Mode ‡‡ Bright: Choose this mode for brighter more saturated colors. ‡‡ Standard: Choose this mode for natural looking colors with a balance of warm and cool tones. ‡‡ Film: Choose this mode for improved detail and image sharpness. ‡‡ Detail: The signal comes from
  • Optoma UHZ65LV | UHZ65LV UM - Page 35
    USING THE PROJECTOR ‡‡ Color Gamut: Select this menu to optomize the color gamut color range for Native, HDTV, Presentation, Cinema, and Game. ‡‡ CMS: Select the following options: ±± Color: Select one of the colors (R/G/B/C/Y/M/W) to adjust its x/y offset and brightness. ±± x Offset: Adjust the x
  • Optoma UHZ65LV | UHZ65LV UM - Page 36
    USING THE PROJECTOR PureEngine Adjust the PureEngine parameters. ‡‡ PureContrast: Use to automatically optimize the brightness of the display during dark / light movie scenes to be shown in incredible detail. ‡‡ PureColor: Use to significantly increase the image's vividness. ‡‡ PureMotion: Use to
  • Optoma UHZ65LV | UHZ65LV UM - Page 37
    3D glasses are use for DLP-Link 3D before enjoy your video. This projector supports frame sequential (page-flip) 3D via HDMI1/HDMI2/VGA ports. To enable 3D time, if the ghosting image appears in the 2D source, make sure to manually turn off the 3D function. 3D Sync Invert Use this option to enable/
  • Optoma UHZ65LV | UHZ65LV UM - Page 38
    . ±± If you use an external anamorphic lens, this LBX mode also allows you to watch a 2.35:1 content (include Anamorphic DVD and HDTV film source) that supports anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Light source power and vertical
  • Optoma UHZ65LV | UHZ65LV UM - Page 39
    USING THE PROJECTOR Display edge mask menu Edge Mask Use this function to remove the video encoding noise on the edge of video source. Display digital zoom menu Digital Zoom Use to reduce or magnify an image on the projection screen. Display image shift menu Image Shift Adjust the projected image
  • Optoma UHZ65LV | UHZ65LV UM - Page 40
    USING THE PROJECTOR Audio menu Audio internal speaker menu Internal Speaker Use this option to temporarily turn off the sound. ‡‡ Auto: Choose "Auto" to automatically turn off the internal speaker when an external speaker is connected to the projector ‡‡ On: Choose "On" to turn on the internal
  • Optoma UHZ65LV | UHZ65LV UM - Page 41
    USING THE PROJECTOR Setup menu Setup projection menu Projection Select the preferred projection between front, rear, ceiling-top, and rear-top. Setup filter settings menu Filter Usage Hours Display the filter time. Optional Filter Installed Set the warning message setting. ‡‡ Yes: Display warning
  • Optoma UHZ65LV | UHZ65LV UM - Page 42
    . By selecting "Off", you will be able to use the Keypad keys. F1/F2/F3 Assign the default function for F1, F2, or F3 between Test Pattern, Brightness, Contrast, Sleep Timer, Color Temp, Gamma, Projection, or MHL. Setup projector ID menu Projector ID ID definition can be set up by menu
  • Optoma UHZ65LV | UHZ65LV UM - Page 43
    USING THE PROJECTOR Setup 12V trigger menu 12V Trigger Use this function to enable or disable the trigger. ‡‡ Off: Choose "Off" to disable the trigger. ‡‡ On: Choose "On" to enable the trigger. Reserved IR_IN & detect GND Setup options menu Language Select the multilingual OSD menu between
  • Optoma UHZ65LV | UHZ65LV UM - Page 44
    -only). DHCP Use this option to enable or disable the DHCP function. ‡‡ Off: To assign IP, subnet mask, gateway, and DNS configuration manually. ‡‡ On: Projector will obtain an IP address automatically from your network. Note: Exiting OSD will automatically apply the entered values. IP Address
  • Optoma UHZ65LV | UHZ65LV UM - Page 45
    USING THE PROJECTOR Making a direct connection from your computer to the projector* 1. Turn "Off" the DHCP option on the projector. 2. Configure the IP address, Subnet Mask, Gateway, and DNS on projector ("Network > LAN"). 3. Open Network and Sharing Center page on your PC, and assign the identical
  • Optoma UHZ65LV | UHZ65LV UM - Page 46
    United States of America, and other countries by JBMIA. The projector is supported by the specified commands of the Crestron Electronics controller and related software, projector, as well as the supported commands for these external devices, please contact the Support-Service directly. 46 English
  • Optoma UHZ65LV | UHZ65LV UM - Page 47
    on the projector and the PC (laptop). AC-IN RJ-45 RS232 HDMI v1.4 HDMI 1 HDMI v2.0 4K/MHL HDMI 2 VGA AUDIO IN AUDIO OUT SERVICE 12V OUT USB POWER OUT (5V 1.5A) S / PDIF 2. On the PC (Laptop), select Start > Control Panel > Network Connections. 3. Right-click on the Local Area Connection
  • Optoma UHZ65LV | UHZ65LV UM - Page 48
    USING THE PROJECTOR 1. Click "Properties". 2. Type in the IP address and Subnet mask, then press "OK". 3. Press the "Menu" button on the projector. 4. Open on projector Network > LAN. 5. Enter the following connection parameters: ±± DHCP: Off ±± IP Address: 192.168.0.100 ±± Subnet Mask: 255.255.255
  • Optoma UHZ65LV | UHZ65LV UM - Page 49
    USING THE PROJECTOR The projector is setup for remote management. The LAN / RJ45 function displays as follows: Information page Main page Tool page Contact IT helpdesk English 49
  • Optoma UHZ65LV | UHZ65LV UM - Page 50
    in projector so called "RS232 by TELNET" for LAN / RJ45 interface. Quick Start-Guide for "RS232 by Telnet" ‡‡ Check and get the IP address on OSD of the Telnet port: 23 (for more detail, kindly please get contact with the service agent or team). 3. Telnet utility: Windows "TELNET.exe" (console mode).
  • Optoma UHZ65LV | UHZ65LV UM - Page 51
    USING THE PROJECTOR Info menu Info menu View the projector information as listed below: ‡‡ Regulatory ‡‡ Serial Number ‡‡ Source ‡‡ Resolution ‡‡ Refresh Rate ‡‡ Display Mode ‡‡ Power Mode (Standby) ‡‡ Light Source Hours ‡‡ Network Status ‡‡ IP Address ‡‡ Projector ID ‡‡ Color Depth ‡‡ Color Format
  • Optoma UHZ65LV | UHZ65LV UM - Page 52
    MAINTENANCE Installing and cleaning the dust filter Installing the dust filter Note: Dust filters are only required/supplied in the selected regions with excessive dust. Cleaning the dust filter We recommend you to clean the dust filter every three months. Clean it more often if the projector is
  • Optoma UHZ65LV | UHZ65LV UM - Page 53
    ADDITIONAL INFORMATION Compatible resolutions Digital (HDMI 1.4) Native resolution: 3840 x 2160 @ 30Hz B0/Established Timing B0/Standard Timing Descriptor Timing 720 x 400 @ 70Hz 1280 x 720 @ 60Hz 3840 x 2160 @ 30Hz [Default] 640 x 480 @ 60Hz 1280 x 800 @ 60Hz 640 x 480 @ 67Hz 1280 x 1024
  • Optoma UHZ65LV | UHZ65LV UM - Page 54
    Timing B0/Descriptor Timing 1920 x 1080 @ 60Hz [Default] B1/Detail Timing 1366 x 768 @ 60Hz 1280 x 800 @ 120Hz(RB) 3D timing for HDMI1.4b 3D supported 2D Supported Frame Rate 59/60Hz option 50Hz option Timing 1920 x 1080p @ 23.98 / 24Hz 1280 x 720p @ 59.94 / 60Hz 1920 x 1080i @ 59.94/60Hz 1920
  • Optoma UHZ65LV | UHZ65LV UM - Page 55
    ADDITIONAL INFORMATION PC 3D timing HDMI VGA Timing 1920 x 1080 @ 120Hz 1280 x 800 @ 120Hz 1024 x 768 @ 120Hz 800 x 600 @ 120Hz 640 x 480 @ 120Hz 1280 x 800 @ 120Hz 1024 x 768 @ 120Hz 800 x 600 @ 120Hz 640 x 480 @ 120Hz Format Frame Sequential Frame Sequential Frame Sequential Frame Sequential
  • Optoma UHZ65LV | UHZ65LV UM - Page 56
    ADDITIONAL INFORMATION Image size and projection distance Diagonal m inch 0.91 36 1.02 40 1.27 50 1.52 60 1.78 70 2.03 80 2.29 90 2.54 100 3.05 120 3.81 150 4.57 180 5.08 200 6.35 250 7.62 300 Desired Image Size Width m inch 0.80 31.38 0.89 34.86 1.11 43.58
  • Optoma UHZ65LV | UHZ65LV UM - Page 57
    ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the
  • Optoma UHZ65LV | UHZ65LV UM - Page 58
    ADDITIONAL INFORMATION IR remote codes For Data Model On Off Geometric Correction PIP/PBP F1 Mode F2 AV Mute ENTER Info. Source Re-Sync F3 Volume D Zoom Menu Format Freeze Remote ID All VGA S-Video HDMI1 HDMI2 123 HDBaseT Video DVI HDMI3 456 BNC YPbPr DisplayPort 3D 7890 Key
  • Optoma UHZ65LV | UHZ65LV UM - Page 59
    ADDITIONAL INFORMATION Key Laser Source F3 Re-Sync Volume D Zoom Menu Format Freeze Remote VGA / 1 S-Video / 2 HDMI1 / 3 HDMI2 HDBaseT / 4 Video / 5 6 HDMI3 7 YPbPr / 8 9 3D / 0 Printing-key definition Laser Source F3 Re-Sync Volume + Volume D Zoom + D Zoom - Menu Format Freeze Remote ID Remote
  • Optoma UHZ65LV | UHZ65LV UM - Page 60
    F8 Keystone No function 32 CD 64 9B Aspect ratio Press to change aspect ratio of a displayed image. 32 CD 89 76 3D Press to manually select a 3D mode that matches your 3D content. 32 CD 52 AD Mute Momentarily turns off / on the audio. 32 CD 44 BB Automatically adjusts
  • Optoma UHZ65LV | UHZ65LV UM - Page 61
    Key Sleep timer Volume + Four direction keys Source Enter key Re-sync Volume Menu HDMI 1 HDMI 2 VGA 1 VGA 2 Video YPbPr Custom code Key code Printing-key Byte 1 Byte 2 Byte 3 Byte 4 definition Description 32 CD 63 9C Sleep Timer Sets the countdown timer interval. 32 CD 11 EE Volume +
  • Optoma UHZ65LV | UHZ65LV UM - Page 62
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen ‡‡ Ensure all the cables and power connections
  • Optoma UHZ65LV | UHZ65LV UM - Page 63
    to all controls ‡‡ If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Remote control problems If the remote control does not work ‡‡ Check the operating angle of the remote control is pointed within ±15° to the IR receiver on the
  • Optoma UHZ65LV | UHZ65LV UM - Page 64
    power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) Power on (Warming) Power on and Laser lighting Power off (Cooling
  • Optoma UHZ65LV | UHZ65LV UM - Page 65
    : Warning TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. English 65
  • Optoma UHZ65LV | UHZ65LV UM - Page 66
    temperature Description 4K UHD 2716 x 1528 Manual zoom and manual focus adjustment 26.45"~302.2" (focus supports YpbPr) ‡‡ Audio In 3.5mm ‡‡ RS232C male (9-pin D-SUB) ‡‡ RJ-45 (supports web control) ‡‡ USB type A ‡‡ Audio Out 3.5mm ‡‡ SPDIF Out ‡‡ 12V Trigger (3.5mm jack) USB type A for service
  • Optoma UHZ65LV | UHZ65LV UM - Page 67
    global offices For service or support, please contact your local office. USA 47697 Westinghouse Drive, Fremont, CA 94539, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com Canada 47697 Westinghouse
  • Optoma UHZ65LV | UHZ65LV UM - Page 68
    www.optoma.com *36.7F701G001-A* P/N:36.7F701G001-A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

User manual
DLP
®
Projector