Optoma W316ST Protocol Functions

Optoma W316ST Manual

Optoma W316ST manual content summary:

  • Optoma W316ST | Protocol Functions - Page 1
    Commands and Protocol Function List RS232 Pin Assignments 3 2 1 9876 54321 Pin no. Name 1 v The interface is 2 subject to model's 3 specifications. TXD RXD GND I/O (From Projector Side) OUT IN GND Pin no. 1 2 3 4 5 6 7 8 9 Spec. N/A RXD TXD N/A GND N/A N/A N/A N/A 65 English
  • Optoma W316ST | Protocol Functions - Page 2
    . Stop Bits: 1 2. 0D is the HEX code for in ASCII code. Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F Į SEND to projector 232 ASCII Code HEX Code Function Description ~XX00 1 7E 30 30 30 30 20 31 0D Power ON ~XX00 0 7E
  • Optoma W316ST | Protocol Functions - Page 3
    3D Mode 7E 30 30 34 30 30 20 30 0D 3Dɦ2D DLP-Link 3 D ~XX400 1 7E 30 30 34 30 30 20 31 5 7E 30 30 37 32 20 35 0D Bottom Right (WXGA only) ~XX90 1 7E 30 30 39 31 20 31 (a=7E 39 39 39 39) ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39) ~XX80 1 7E 30
  • Optoma W316ST | Protocol Functions - Page 4
    , XGA1, XGA2, WXGA) ~XX100 1 7E 20 30 0D Test Pattern None projector automatically 232 ASCII Code HEX Code Function Projector Return Description When Standby/Warming/ INFOn Standby/Warming/Cooling/Out of Range/Lamp fail/Fan Cooling/Out of Range/Lamp Lock/Over Temperature/Lamp
  • Optoma W316ST | Protocol Functions - Page 5
    Function Projector Return Description 0D Contrast OKn ~XX127 1 7E 30 30 31 32 37 20 31 0D Aspect Ratio OKn (WXGA) n : 0/1/2/3/4/5 = 4:3/16:9/16:10/LBX/Native/AUTO (XGA) n: 0/1/3/4 31 0D Information OKabbbbccdddde a : 0/1 = Off/On bbbb: Lamp Hour cc: source 00/01/02/03/04/05/= None/VGA1
  • 1
  • 2
  • 3
  • 4
  • 5

65
English
Appendices
RS232 Pin Assignments
RS232 Commands and Protocol
Function List
1
2
3
4
5
6
7
8
9
Pin no.
Spec.
1
N/A
2
RXD
3
TXD
4
N/A
5
GND
6
N/A
7
N/A
8
N/A
9
N/A
Pin no.
Name
I/O (From
Projector Side)
1
TXD
OUT
2
RXD
IN
3
GND
GND
1
2
3
v
The interface is
subject to model’s
specifications.