Optoma W318ST W318ST User Manual

Optoma W318ST Manual

Get Optoma W318ST PDF manuals and user guides View all Optoma W318ST manuals
Add to My Manuals
Save this manual to your list of manuals

Optoma W318ST manual content summary:

  • Optoma W318ST | W318ST User Manual - Page 1
    DLP® Projector User manual
  • Optoma W318ST | W318ST User Manual - Page 2
    TABLE OF CONTENTS SAFETY 4 Important Safety Instruction...4 3D Safety Information...5 Copyright...6 Disclaimer...6 Trademark Recognition...6 FCC...7 Declaration of Conformity for EU countries 7 menu 42 Setup projection menu...43 Setup screen type menu...43 Setup lamp settings menu...43 2 English
  • Optoma W318ST | W318ST User Manual - Page 3
    control settings menu 50 Info menu...55 MAINTENANCE 56 Replacing the lamp...56 Installing and cleaning the dust filter 58 ADDITIONAL INFORMATION 59 Compatible 64 IR remote control 2 codes...66 Troubleshooting...68 Warning indicators...70 Specifications...72 Optoma global offices...73 English 3
  • Optoma W318ST | W318ST User Manual - Page 4
    servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction gases may be present in the atmosphere. The lamp inside the projector becomes very hot during operation and
  • Optoma W318ST | W318ST User Manual - Page 5
    by appropriate service personnel. ‡‡ Only use attachments/accessories specified by the manufacturer. ‡‡ Do not look into straight into the projector lens during operation. The bright light may harm your eyes. ‡‡ When replacing the lamp, please allow the unit to cool down. Follow instructions as
  • Optoma W318ST | W318ST User Manual - Page 6
    and the DLP logo are registered trademarks of Texas Instruments and BrilliantColorTM is a trademark of Texas Instruments. MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of MHL Licensing, LLC. All other product names used in this manual are the properties
  • Optoma W318ST | W318ST User Manual - Page 7
    /30/EC (including amendments) ‡‡ Low Voltage Directive 2014/35/EC ‡‡ R & TTE Directive 1999/5/EC (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment
  • Optoma W318ST | W318ST User Manual - Page 8
    supplied in some specific regions. Please consult your dealer for detailed information. Standard accessories  CD User Manual *(1)  Warranty Card *(2)  Basic User Manual Projector Remote control *(3) Power lead Documentation Note The remote control is shipped with the battery. *(1) For
  • Optoma W318ST | W318ST User Manual - Page 9
    20 cm between the "inlet" and "outlet" labels. No Item 1. IR Receiver 2. Keypad 3. Lens Cap 4. Tilt-Adjustment Foot 5. Lens 6. Focus Lever No Item 7. Ventilation (inlet) 8. Lamp Cover 9. Ventilation (outlet) 10. KensingtonTM Lock Port 11. Power Socket 12. Input / Output English 9
  • Optoma W318ST | W318ST User Manual - Page 10
    INTRODUCTION Connections Type 1 (8 IO) 1 2 3 45 5 Full 3D Type 2 (12 IO) 10 9 8 7 6 1 11 2 3 12 4 65 HDMI HDMI 2 MHL USB POWER OUT (5V 1.5A) VGA IN 1 VGA OUT VGA IN 2 RS232 RJ-45 VIDEO AUDIO OUT AUDIO IN MIC IN Full 3D 10 7 8 9 14 13 10 English
  • Optoma W318ST | W318ST User Manual - Page 11
    1 Connector 2. USB Power Out (5V/1.5A) Connector / MOUSE / SERVICE Connector 3. VGA IN / VGA IN 1 Connector 4. Video Connector 5. Connector Type 1 (8 IO) √ √ N/A N/A N/A N/A Note: "√" means the item is supported, "N/A" means the item is not available. Type 2 (12 IO) √ √ Note: ‡‡ ‡‡
  • Optoma W318ST | W318ST User Manual - Page 12
    INTRODUCTION Keypad 1 2 3 9 12 4 11 5 6 10 No Item 1. On/Standby LED 2. Lamp LED 3. Temp LED 4. Information 5. Re-Sync 6. Four Directional Select Keys 98 7 No Item 7. IR Receiver 8. Enter 9. Keystone Correction 10. Menu 11. Source 12 Power 12 English
  • Optoma W318ST | W318ST User Manual - Page 13
    18. Brightness Mode The actual remote control may vary depending on the region. Some keys may have no function for models that do not support these features. Before using the remote control for the first time, remove the transparent insulation tape. See page 21 for battery installation. CR2302V5OL
  • Optoma W318ST | W318ST User Manual - Page 14
    . Numeric Keypad (0-9) 27. Resync The actual remote control may vary depending on the region. Some keys may have no function for models that do not support these features.
  • Optoma W318ST | W318ST User Manual - Page 15
    horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector lamp or the projector itself. For none standard installation advise please contact
  • Optoma W318ST | W318ST User Manual - Page 16
    the projector should not exceed 15 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically, and may lead to other unpredictable damages. 15° -15° ‡‡ Allow at least 30 cm clearance around the exhaust vent
  • Optoma W318ST | W318ST User Manual - Page 17
    SETUP AND INSTALLATION Connecting sources to the projector Type 1 (8 IO) 4 1 3 2  5 6 7 Full 3D MOLEX 12 11 10 9 8 MOLEX English 17
  • Optoma W318ST | W318ST User Manual - Page 18
    SETUP AND INSTALLATION Type 2 (12 IO) 13 4 1 5 6 7 HDMI HDMI 2 MHL USB POWER OUT (5V 1.5A) VGA IN 1 2 VGA OUT VGA IN 2 RS232 RJ-45 VIDEO AUDIO OUT AUDIO IN MIC IN Full 3D MOLEX 3 9 10 14 12 8 11 15 MOLEX 18 English
  • Optoma W318ST | W318ST User Manual - Page 19
    Cable 11. USB Cable 12. Power Cord 13. MHL Cable 14. Microphone In Cable 15. RJ-45 Cable Type 1 (8 IO N/A N/A N/A Note: "√" means the item is supported, "N/A" means the item is not available. Type 2 (12 IO English 19
  • Optoma W318ST | W318ST User Manual - Page 20
    SETUP AND INSTALLATION Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or
  • Optoma W318ST | W318ST User Manual - Page 21
    case clean and install new battery. ‡‡ Risk of an explosion if battery is replaced by an incorrect type. ‡‡ Dispose of used battery according to the instructions. English 21
  • Optoma W318ST | W318ST User Manual - Page 22
    -red beam. ‡‡ Make sure the IR transmitter of the remote control is not being shined by sunlight or fluorescent lamps directly. ‡‡ Please keep the remote controller away from fluorescent lamps for over 2 meters or the remote controller might become malfunction. ‡‡ If the remote control is close to
  • Optoma W318ST | W318ST User Manual - Page 23
    USING THE PROJECTOR Powering on / off the projector or Powering on 1. Securely connect the power lead and signal/source cable. When connected, the On/Standby LED will turn red. 2. Turn on the projector by pressing the " " either on the projector keypad or the remote control. 3. A start up screen
  • Optoma W318ST | W318ST User Manual - Page 24
    USING THE PROJECTOR Selecting an input source Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, push the source button on the projector keypad or
  • Optoma W318ST | W318ST User Manual - Page 25
    the new settings. Type 1 (8 IO) Sub Menu Settings Display Main Menu Image Settings 3D Aspect Ratio Edge Mask Zoom Image Shift Keystone Select Exit Navigation guide Enter English 25
  • Optoma W318ST | W318ST User Manual - Page 26
    USING THE PROJECTOR Type 2 (12 IO) Main Menu Sub Menu Display Image Settings 3D Aspect Ratio Edge Mask Zoom Image Shift Keystone Select Exit Navigation guide Settings Enter 26 English
  • Optoma W318ST | W318ST User Manual - Page 27
    USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Display Mode Wall Color Display Brightness Contrast Sharpness Color Tint Image Settings Gamma Film Video Graphics Standard(2.2) 1.8 2.0 2.4 BrilliantColorTM Color Temperature Color Settings Color
  • Optoma W318ST | W318ST User Manual - Page 28
    ] -10~10 (depends on signal) [Default: 0] 0~31 (depends on signal) [Default: 0] -5~5 (depends on signal) [Default: 0] -5~5 (depends on signal) [Default: 0] Bright Eco. Dynamic Eco+ Off [Default] DLP-Link 3D [Default] L R 28 English
  • Optoma W318ST | W318ST User Manual - Page 29
    Ratio Edge Mask Zoom H Image shift V Keystone Mute Audio Volume Audio Input/Mic Projection Setup Screen Type [WXGA model] Lamp Settings Lamp Reminder Lamp Reset Filter Settings Optional Filter Installed Filter Usage Hours Filter Reminder Sub Menu 4 Values Auto [Default] SBS Top and
  • Optoma W318ST | W318ST User Manual - Page 30
    USING THE PROJECTOR Main Menu Sub Menu Filter Settings Sub Menu 2 Filter Reset Sub Menu 3 Direct Power On Signal Power On Auto Power Off (min) Sleep Timer (min) Always On Power Settings Quick Resume Power Mode (Standby) LAN (Standby) VGA Out (Standby) Sub Menu 4 Setup USB Power Security
  • Optoma W318ST | W318ST User Manual - Page 31
    4 Values On Off HDMI 2* VGA 2* Test Pattern LAN* Brightness Contrast Sleep Timer [Default] Color Matching Color Temperature Gamma Projection Lamp Settings Zoom Freeze MHL* HDMI 2* VGA 2* Test Pattern LAN* Brightness Contrast Sleep Timer Color Matching [Default] Color Temperature Gamma Projection
  • Optoma W318ST | W318ST User Manual - Page 32
    for Type 2 (12 IO) only] Sub Menu 3 Setup Language Options Closed Captioning Menu Settings Menu Location Sub Menu 4 Values Projection Lamp Settings Zoom Freeze MHL* 0~99 English [Default] Deutsch Français Italiano Español Português Polski Nederlands Svenska Norsk/Dansk Suomi Magyar Čeština
  • Optoma W318ST | W318ST User Manual - Page 33
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Menu Settings Menu Timer Auto Source Input Source [(*) for Type 2 (12 IO) only] Setup Options HDMI or HDMI1* Input Name [(*) for Type 2 (12 IO) only] HDMI2/MHL* VGA or VGA1* VGA2* Video High Altitude Display Mode Lock Keypad
  • Optoma W318ST | W318ST User Manual - Page 34
    Device Discovery Sub Menu 3 Telnet HTTP Regulatory Serial Number Source Resolution Refresh Rate Display Mode Power mode (Standby) Bright Eco. Info Lamp Hours Dynamic Eco+ Total Network Status (Type 2 (12 IO) only) IP Address (Type 2 (12 IO) only) Projector ID Filter Usage Hours
  • Optoma W318ST | W318ST User Manual - Page 35
    USING THE PROJECTOR Main Menu Info Sub Menu Brightness Mode FW Version Sub Menu 2 System LAN (Type 2 (12 IO) only) MCU Sub Menu 3 Sub Menu 4 Note: The available menu options vary depending on the model type. Values English 35
  • Optoma W318ST | W318ST User Manual - Page 36
    USING THE PROJECTOR Display menu Display image settings menu Display Mode There are many factory presets optimized for various types of images. ‡‡ Presentation: This mode is suitable for showing PowerPoint presentations when the projector is connected to the PC. ‡‡ Bright: Maximum brightness from PC
  • Optoma W318ST | W318ST User Manual - Page 37
    USING THE PROJECTOR Color Settings Configure the color settings. ‡‡ BrilliantColorTM: This adjustable item utilizes a new color-processing algorithm and enhancements to enable higher brightness while providing true, more vibrant colors in picture. ‡‡ Color Temperature: Select a color temperature
  • Optoma W318ST | W318ST User Manual - Page 38
    brightness level of the content is automatically detected to significantly reduced lamp power consumption (up to 83%) during periods of inactivity. ‡‡ Off: Select "Off" to turn off 3D mode. ‡‡ DLP-Link: Select to use optimized settings for DLP 3D Glasses. 3D → 2D Use this option to specify how
  • Optoma W318ST | W318ST User Manual - Page 39
    the original image without any scaling. ‡‡ Auto: Automatically selects the appropriate display format. WXGA scaling table (screen type 16:10): Note: ‡‡ Supported screen type 16:9 (1280x720), 16:10 (1280x800). ‡‡ When screen type is 16:9 there is no 16x10 format in this condition. ‡‡ When
  • Optoma W318ST | W318ST User Manual - Page 40
    USING THE PROJECTOR WXGA auto mapping rule (screen type 16:10): Auto 4:3 Wide Laptop SDTV HDTV Input resolution H-resolution V-resolution 640 480 800 600 1024 768 1280 1024 1400 1050 1600 1200 1280 720 1280 768 1280 800 720 576 720 480 1280 720 1920 1080 Auto/Scale
  • Optoma W318ST | W318ST User Manual - Page 41
    USING THE PROJECTOR Auto HDTV Input resolution H-resolution V-resolution 1280 720 1920 1080 Auto/Scale 1280 720 1280 720 1280 720 XGA scaling table: Source 4x3 16x9 Native mode Auto 480i/p 576i/p 1080i/p 720p Scale to 1024x768. Scale to 1024x576. No scaling will be made; the
  • Optoma W318ST | W318ST User Manual - Page 42
    USING THE PROJECTOR Display keystone menu Keystone Adjust the image distortion caused by tilting the projector. Audio menu Audio mute menu Mute Use this option to temporarily turn off the sound. ‡‡ ‡‡ Note: ‡‡ ‡‡ On: Choose "On" to turn mute on. Off: Choose "Off" to turn mute off. "Mute"
  • Optoma W318ST | W318ST User Manual - Page 43
    to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Lamp Reset Resets the lamp hour counter after replacing the lamp. Setup filter settings menu Optional Filter Installed Set the warning message
  • Optoma W318ST | W318ST User Manual - Page 44
    USING THE PROJECTOR Auto Power Off (min.) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Sleep Timer (min.) Configure the sleep timer. ‡‡
  • Optoma W318ST | W318ST User Manual - Page 45
    USING THE PROJECTOR Setup security menu Security Enable this function to prompt for a password before using the projector. ‡‡ On: Choose "On" to use security verification when the turning on the projector. ‡‡ Off: Choose "Off" to be able to switch on the projector without password verification.
  • Optoma W318ST | W318ST User Manual - Page 46
    for User1, User2, or User3 between HDMI 2, VGA 2, test pattern, LAN, brightness, contrast, sleep timer, color matching, color temperature, gamma, projection, lamp settings, zoom, freeze, and MHL. Note: The available menu options vary depending on the model type. Setup projector ID menu Projector ID
  • Optoma W318ST | W318ST User Manual - Page 47
    USING THE PROJECTOR Input Name Use to rename the input function for easier identification. The available options include HDMI1, HDMI2/MHL, VGA1, VGA2, and Video. Note: The available menu options vary depending on the model type. High Altitude When "On" is selected, the fans will spin faster. This
  • Optoma W318ST | W318ST User Manual - Page 48
    . ‡‡ On: Projector will obtain an IP address automatically from your network. ‡‡ Off: To assign IP, subnet mask, gateway, and DNS configuration manually. Note: Exiting OSD will automatically apply the entered values. IP Address Display the IP address. Subnet Mask Display subnet mask number. Gateway
  • Optoma W318ST | W318ST User Manual - Page 49
    USING THE PROJECTOR Making a direct connection from your computer to the projector* 1. Turn "Off" the DHCP option on the projector. 2. Configure the IP address, Subnet Mask, Gateway, and DNS on projector ("Network > LAN"). 3. Open Network and Sharing Center page on your PC, and assign the identical
  • Optoma W318ST | W318ST User Manual - Page 50
    United States of America, and other countries by JBMIA. The projector is supported by the specified commands of the Crestron Electronics controller and related software, projector, as well as the supported commands for these external devices, please contact the Support-Service directly. 50 English
  • Optoma W318ST | W318ST User Manual - Page 51
    USING THE PROJECTOR LAN RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). HDMI HDMI 2 MHL USB POWER OUT (5V 1.5A) VGA IN 1 VGA OUT VGA IN 2 RS232 RJ-45 VIDEO AUDIO OUT AUDIO IN MIC IN Full 3D 2. On the PC (Laptop), select Start > Control Panel > Network
  • Optoma W318ST | W318ST User Manual - Page 52
    USING THE PROJECTOR 5. Click "Properties". 6. Type in the IP address and Subnet mask, then press "OK". 7. Press the "Menu" button on the projector. 8. Open on projector Network > LAN. 9. Enter the following connection parameters: ±± DHCP: Off ±± IP Address: 192.168.0.100 ±± Subnet Mask: 255.255.255
  • Optoma W318ST | W318ST User Manual - Page 53
    USING THE PROJECTOR The projector is setup for remote management. The LAN / RJ45 function displays as follows: Information page Main page Tool page Contact IT helpdesk English 53
  • Optoma W318ST | W318ST User Manual - Page 54
    in projector so called "RS232 by TELNET" for LAN / RJ45 interface. Quick Start-Guide for "RS232 by Telnet" ‡‡ Check and get the IP address on OSD of the Telnet port: 23 (for more detail, kindly please get contact with the service agent or team). 3. Telnet utility: Windows "TELNET.exe" (console mode).
  • Optoma W318ST | W318ST User Manual - Page 55
    projector information as listed below: ‡‡ Regulatory ‡‡ Serial Number ‡‡ Source ‡‡ Resolution ‡‡ Refresh Rate ‡‡ Display Mode ‡‡ Power Mode (Standby) ‡‡ Lamp Hours ‡‡ Network Status (*) ‡‡ IP Address (*) ‡‡ Projector ID ‡‡ Filter Usage Hours ‡‡ Brightness Mode ‡‡ FW Version Note: (*) The "Network
  • Optoma W318ST | W318ST User Manual - Page 56
    life is nearing the end of use, a warning message will appear on the screen. Warning Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30
  • Optoma W318ST | W318ST User Manual - Page 57
    . 4. Unscrew the screw on the cover. 1 5. Remove the cover. 2 6. Unscrew the screw on the lamp module. 3 7. Lift up the lamp handle. 4 8. Remove the lamp cord. 5 9. Remove the lamp module carefully. 6 10. To replace the lamp module, reverse the previous steps. 11. Turn on the projector and reset the
  • Optoma W318ST | W318ST User Manual - Page 58
    filter We recommend you to clean the dust filter every three months. Clean it more often if the projector is used in a dusty environment. Lamp replacing Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Disconnect the
  • Optoma W318ST | W318ST User Manual - Page 59
    ADDITIONAL INFORMATION Compatible resolutions Digital compatibility B0/Established Timing 720x400 @ 70Hz 640x480 @ 60Hz 640x480 @ 67Hz 640x480 @ 72Hz 640x480 @ 75Hz 800x600 @ 56Hz 800x600 @ 60Hz 800x600 @ 72Hz 800x600 @ 75Hz 832x624 @ 75Hz 1024x768 @ 60Hz 1024x768 @ 70Hz 1024x768 @ 75Hz 1280x1024
  • Optoma W318ST | W318ST User Manual - Page 60
    is Frame sequential Note: ‡‡ If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode. ‡‡ Support NVIDIA 3DTV Play if there is no patent fee from Optoma. 1080i@25hz and 720p@50hz will run in 100 hz; other 3D timing will run in 120hz. ‡‡ 1080p@24hz will
  • Optoma W318ST | W318ST User Manual - Page 61
    ADDITIONAL INFORMATION Image size and projection distance XGA Diagonal m inch 0.81 32 1.27 50 1.52 60 1.78 70 2.03 80 2.29 90 2.54 100 3.05 120 3.81 150 4.57 180 5.08 200 6.35 250 7.62 300 Desired Image Size Width m inch 0.65 25.60 1.02 40.00 1.22 48.00 1.42
  • Optoma W318ST | W318ST User Manual - Page 62
    ADDITIONAL INFORMATION W H H Hd 5.2 cm D 62 English
  • Optoma W318ST | W318ST User Manual - Page 63
    ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the
  • Optoma W318ST | W318ST User Manual - Page 64
    the on-screen display menus for projector. 88 ‡‡ Press to adjust image distortion caused by tilting the projector. C7 ‡‡ Press to navigate down. Press to manually select a 3D mode that matches your 3D content. 93 Press to choose HDMI source. 86
  • Optoma W318ST | W318ST User Manual - Page 65
    ADDITIONAL INFORMATION Key legend VGA Video Source Brightness mode ReSync Description Press to choose VGA source. Press to choose video source. Press to select an input signal. Press to automatically adjust the picture brightness to give an optimum contrast performance. Automatically synchronize
  • Optoma W318ST | W318ST User Manual - Page 66
    ADDITIONAL INFORMATION IR remote control 2 codes Power Switch Freeze L R Enter Page- Laser Page+ Keystone -+ Volume -+ 1 4 HDMI 7 User1 Source 2 Menu 5 VGA 8 User2 0 3 3D 6 Video 9 User3 Resync Key Power Switch Display blank / audio mute Freeze Mute Mouse left click L Mouse
  • Optoma W318ST | W318ST User Manual - Page 67
    number "1". ‡‡ Press to display or exit the on-screen display menus Menu/2 for projector. ‡‡ Use as numeric keypad number "2". 3D/3 ‡‡ Press to manually select a 3D mode that matches your 3D content. ‡‡ Use as numeric keypad number "3". ‡‡ Press to choose HDMI source. HDMI/4 ‡‡ Use as numeric
  • Optoma W318ST | W318ST User Manual - Page 68
    Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems the projection lamp has been securely installed. Please refer to the "Replacing the Lamp" section.
  • Optoma W318ST | W318ST User Manual - Page 69
    popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section on pages 56-57. Remote control problems If the remote control does not work ‡‡ Check the operating angle of the
  • Optoma W318ST | W318ST User Manual - Page 70
    (see below) light up or flash, the projector will automatically shutdown: ‡‡ "LAMP" LED indicator is lit red and if "On/Standby" indicator flashes red. ‡‡ light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord)
  • Optoma W318ST | W318ST User Manual - Page 71
    : 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. ‡‡ Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact
  • Optoma W318ST | W318ST User Manual - Page 72
    ) Projection distance Description XGA / WXGA 1024x768 / 1280x800 Manual focus ‡‡ Adjustable from 31.9" to 303.09" (Mechanical model. ‡‡ Audio Out 3.5mm ‡‡ VGA Out ‡‡ USB type A for mouse / service ‡‡ RJ-45 (support web control)* Note: (*) This connector is only applicable for Type 2 (12 I/O) model
  • Optoma W318ST | W318ST User Manual - Page 73
    ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA 47697 Westinghouse Drive, Fremont, CA 94539, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com
  • Optoma W318ST | W318ST User Manual - Page 74
    www.optoma.com *36.7DR01G001-A* P/N:36.7DR01G001-A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
User manual
DLP
®
Projector