Optoma WU334 WU334_UM

Optoma WU334 Manual

Get Optoma WU334 PDF manuals and user guides View all Optoma WU334 manuals
Add to My Manuals
Save this manual to your list of manuals

Optoma WU334 manual content summary:

  • Optoma WU334 | WU334_UM - Page 1
    DLP® Projector User manual
  • Optoma WU334 | WU334_UM - Page 2
    OF CONTENTS SAFETY 4 Important Safety Instruction...4 3D Safety Information...5 Copyright...6 16 Installing the projector...16 Adjusting the projector image...20 USING THE PROJECTOR 23 Powering on / off the projector 23 Selecting an lamp settings menu...42 Setup filter settings menu...42 2 English
  • Optoma WU334 | WU334_UM - Page 3
    ...57 Image size and projection distance 59 Projector dimensions and ceiling mount installation 61 IR remote control 1 codes...62 IR remote control 2 codes...64 IR remote control 3 codes...66 Troubleshooting...68 Warning indicators...69 Specifications...72 Optoma global offices...73 English 3
  • Optoma WU334 | WU334_UM - Page 4
    the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction ‡‡ Do not stare into the beam, RG2. As with any bright
  • Optoma WU334 | WU334_UM - Page 5
    by appropriate service personnel. ‡‡ Only use attachments/accessories specified by the manufacturer. ‡‡ Do not look into straight into the projector lens during operation. The bright light may harm your eyes. ‡‡ When replacing the lamp, please allow the unit to cool down. Follow instructions as
  • Optoma WU334 | WU334_UM - Page 6
    recommended that users take frequent eyesight. The ideal viewing distance should be at least NOT place your 3D PROJECTOR near open stairwells, DLP logo are registered trademarks of Texas Instruments and BrilliantColorTM is a trademark of Texas Instruments. All other product names used in this manual
  • Optoma WU334 | WU334_UM - Page 7
    could void the user's authority, which is granted by the Federal Communications Commission, to operate this projector. Operation Conditions 2014/53/EU (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution
  • Optoma WU334 | WU334_UM - Page 8
    supplied in some specific regions. Please consult your dealer for detailed information. Standard accessories  CD User Manual *(1)  Warranty Card *(2)  Basic User Manual Projector Remote control *(3) Power lead Documentation Note The remote control is shipped with the battery. *(1) For
  • Optoma WU334 | WU334_UM - Page 9
    13 12 11 5 Note: Keep a minimum distance of 20 cm between the "inlet" and "outlet" labels. No Item 1. Lens 2. IR Receiver 3. Keypad 4. Lens Cap 5. Tilt-Adjustment Foot 6. Focus Ring 7. Ventilation (inlet) No Item 8. Zoom Lever 9. Lamp Cover 10. Ventilation (outlet) 11. KensingtonTM
  • Optoma WU334 | WU334_UM - Page 10
    INTRODUCTION Connections Type 1 (7 IO) 2a 3 4 5 67 Type 2 (8 IO) 11 10 9 1 2b 3 4 5 67 Type 3 (9 IO) 11 10 9 1 2b 3 4 5 67 10 English 11 10 9 8
  • Optoma WU334 | WU334_UM - Page 11
    OUT (5V 1A) Connector / MOUSE / SERVICE Connector √ 4. VGA Connector √ 5. VIDEO supported, "N/A" means the item is not available. Type 2 (8 IO) √ √ (b) √ N/A √ √ √ Type 2 (9 IO) √ √ (b) √ Note: ‡‡ Remote mouse requires special remote control. ‡‡ The I/Os depend on the projector
  • Optoma WU334 | WU334_UM - Page 12
    INTRODUCTION Keypad 1 2 3 9 12 4 11 5 6 10 No Item 1. On/Standby LED 2. Lamp LED 3. Temp LED 4. Information 5. Re-Sync 6. Four Directional Select Keys 98 7 No Item 7. IR Receiver 8. Enter 9. Keystone Correction 10. Menu 11. Source 12 Power 12 English
  • Optoma WU334 | WU334_UM - Page 13
    18. Brightness Mode The actual remote control may vary depending on the region. Some keys may have no function for models that do not support these features. Before using the remote control for the first time, remove the transparent insulation tape. See page 21 for battery installation. CR2302V5OL
  • Optoma WU334 | WU334_UM - Page 14
    - 8. Keystone - / + 9. Menu 10. Aspect Ratio 11. HDMI 12. User 2 13. User 1 14. Source No Item 15. Brightness Mode 16. Mouse On / Off 17. - / + 22. 3D Menu On / Off 23. VGA 24. Video 25. User 3 26. Numeric Keypad (0-9) 27. Resync The actual remote control may vary depending on
  • Optoma WU334 | WU334_UM - Page 15
    1 4. Brightness 5. Keystone 6. Mute 7. DB (Dynamic Black) 8. Source 9. Enter 10. Menu 11. HDMI1 12. VGA1 (not supported) 13. VGA2 (not supported) 14. Power Off No Item 15. User 3 16. Contrast 17. Display Mode 18. Aspect Ratio 19. 3D Menu On / Off 20. Sleep Timer 21. Volume + 22
  • Optoma WU334 | WU334_UM - Page 16
    mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector lamp or the projector itself. For none standard installation advise please contact Optoma. 16 English
  • Optoma WU334 | WU334_UM - Page 17
    SETUP AND INSTALLATION Type 1 (7 IO) 2 3 4 5 6 13 12 11 10 14 MOLEX MOLEX 7 8 English 17
  • Optoma WU334 | WU334_UM - Page 18
    SETUP AND INSTALLATION Type 2 (8 IO) 1 2 3 4 5 6 13 12 11 10 14 MOLEX MOLEX 7 8 18 English
  • Optoma WU334 | WU334_UM - Page 19
    10. USB Cable (mouse control) 11. RS232 Cable 12. USB Power Cable 13. HDMI Stick 14. Power Cord Type 1 (7 IO) N/A N/A Note: "√" means the item is supported, "N/A" means the item is not available. Type 2 (8 IO N/A Type 3 (9 IO English 19
  • Optoma WU334 | WU334_UM - Page 20
    size. ‡‡ To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and legible. Focus Ring Zoom Lever Note: The projector will focus at a distance of 1m to 10m. 20 English
  • Optoma WU334 | WU334_UM - Page 21
    case clean and install new battery. ‡‡ Risk of an explosion if battery is replaced by an incorrect type. ‡‡ Dispose of used battery according to the instructions. English 21
  • Optoma WU334 | WU334_UM - Page 22
    might become malfunction. ‡‡ If the remote control is close to Inverter-Type fluorescent lamps, it might become ineffective from time to time. ‡‡ If the remote control and the projector are within a very short distance, the remote control might become ineffective. ‡‡ When you aim at the screen, the
  • Optoma WU334 | WU334_UM - Page 23
    again. 3. Press the " " again to confirm, otherwise the message will disappear after 15 seconds. When you press the " " button for the second time, the projector will shut down. 4. The cooling fans will continue to operate for about 10 seconds for the cooling cycle and the On/ Standby LED will flash
  • Optoma WU334 | WU334_UM - Page 24
    source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, push the source button on the projector keypad or the remote control to select the desired input. or 24 English
  • Optoma WU334 | WU334_UM - Page 25
    settings. The projector will automatically detect the source. 1. To open the OSD menu, press on the remote control or the projector keyboard. 2. exit, press the or again. The OSD menu will close and the projector will automatically save the new settings. Sub Menu Settings Display Main Menu
  • Optoma WU334 | WU334_UM - Page 26
    USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub mode] Color Settings Color Matching Color Hue Saturation Gain Values Presentation Bright Cinema Game sRGB DICOM SIM. User 3D Off [Default] Blackboard Light Yellow Light Green Light Blue Pink Gray -50~50 -50~50
  • Optoma WU334 | WU334_UM - Page 27
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Signal Color Space [HDMI Input] White Level Black Level IRE Automatic Frequency Phase H. Position V. Position Exit Brightness Mode [Lamp Base - Data] Reset Values Cancel [Default] Yes -50~50 -50~50 -50~50 -50~50 -50~50
  • Optoma WU334 | WU334_UM - Page 28
    PROJECTOR Main Menu Sub Menu Sub Menu 2 3D Mode Sub Menu 3 3D->2D 3D 3D Format Display 3D sync invert Aspect Ratio Edge Mask Zoom H Image shift V Keystone Audio Mute Volume Projection Setup Screen Type [WUXGA model] Lamp Settings Lamp Reminder Lamp Reset Sub Menu 4 Values Off DLP
  • Optoma WU334 | WU334_UM - Page 29
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Optional Filter Installed Filter Usage Hours Sub Menu 3 Filter Settings Filter Reminder Sub Menu 4 Setup Filter Reset Direct Power
  • Optoma WU334 | WU334_UM - Page 30
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Test Pattern IR Test Pattern LAN (Type 3 (9 IO) only) Brightness Contrast Sleep Timer [Default] Color Matching Color Temp Gamma Projection Lamp Settings Zoom Freeze MHL (Type 2 (8 IO) and Type 3 (9 IO) only) HDMI 2 Test Pattern LAN (
  • Optoma WU334 | WU334_UM - Page 31
    Sub Menu 3 Remote Settings [depends on remote] User3 Projector ID Setup Options Language Sub Menu 4 Values HDMI 2 Test Pattern LAN (Type 3 (9 IO) only) Brightness Contrast Sleep Timer Color Matching Color Temp [Default] Gamma Projection Lamp Settings Zoom Freeze MHL (Type 2 (8 IO) and Type
  • Optoma WU334 | WU334_UM - Page 32
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Closed Captioning Sub Menu 3 Menu Settings Menu Location Menu Timer Auto Source Setup [Default] Custom Default [Default] Custom Off [Default] On Off [Default] On Off [Default] On Off [Default] On Default [Default] Neutral User 32 English
  • Optoma WU334 | WU334_UM - Page 33
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Setup Options Reset LAN Network (Type 3 (9 IO) only) Control Background Color Reset OSD Reset to Default Network
  • Optoma WU334 | WU334_UM - Page 34
    Projector ID Filter Usage Hours Brightness Mode FW Version Sub Menu 2 Bright Eco. Dynamic Eco+ Total System LAN MCU Sub Menu 3 Sub Menu 4 Values 00x00 0.00Hz 0 hr 0 hr 0 hr 0 hr 00~99 Note: ‡‡ ‡‡ ‡‡ The "Lamp Reset" in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service
  • Optoma WU334 | WU334_UM - Page 35
    USING THE PROJECTOR ‡‡ 3D: To experience the 3D effect, you need to have 3D glasses. Make sure your PC/portable device has a 120 Hz signal output quad buffered
  • Optoma WU334 | WU334_UM - Page 36
    RGB(0-255), RGB(16-235), and YUV. ‡‡ White Level: Allow user to adjust White Level when inputting Video signals. Note: White level can for RGB/Component input sources. Brightness Mode (Lamp base data) Adjust the brightness mode settings for lamp-based projectors. ‡‡ Bright: Choose "Bright" to
  • Optoma WU334 | WU334_UM - Page 37
    PROJECTOR Reset Return the factory default settings for color settings. Display 3D menu 3D Mode Use this option to disable the 3D function or select the appropriate the 3D function. ‡‡ Off: Select "Off" to turn off 3D mode. ‡‡ DLP-Link: Select to use optimized settings for DLP 16:10 (WUXGA model only
  • Optoma WU334 | WU334_UM - Page 38
    bars and boarder will change in size depending on the aspect ratio. Black bars WUXGA active area 1080p active area WUXGA 1920x1200 pixels 1080p 1920x1080 pixels For projectors with a resolution of WUXGA (1920 × 1200) Format Aspect ratio 16:10 16:9 4:3 Native 16:9 Full Zoom Auto 38
  • Optoma WU334 | WU334_UM - Page 39
    that supports anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Lamp power and vertical resolution are fully utilized. To use the superwide format, do the following: a) Set the screen aspect ratio to 2.0:1. b) Align the projector
  • Optoma WU334 | WU334_UM - Page 40
    USING THE PROJECTOR WUXGA scaling table (screen type 16:10): 16 : 10 screen 4x3 16x10 1920 1920 1500 1800 1920 Auto/Scale 1200 1200 1200 1200 1200 1200 1200 1080 1152 1200 1200 1200 1080 WUXGA scaling table (screen type 16:9): 16 : 9 screen 4x3 16x9 LBX Native mode Auto 480i/p 576i/p 1080i
  • Optoma WU334 | WU334_UM - Page 41
    USING THE PROJECTOR WUXGA auto mapping rule (screen type 16:9): Auto 4:3 Wide Laptop SDTV HDTV Input resolution H-resolution V-resolution 640 position horizontally (H) or vertically (V). Display keystone menu Keystone Adjust the image distortion caused by tilting the projector. English 41
  • Optoma WU334 | WU334_UM - Page 42
    USING THE PROJECTOR Audio menu Audio mute menu Mute Use this option to temporarily turn off the sound. rear-top. Setup screen type menu Screen Type (for WUXGA model only) Choose the screen type from 16:9 and 16:10. Setup lamp settings menu Lamp Reminder Choose this function to show or to hide the
  • Optoma WU334 | WU334_UM - Page 43
    powered on again, if selected within a period of 100 seconds. ‡‡ Off: The fan will start cooling the system after 10 seconds when user turns off the projector. Power Mode (Standby) Set the power mode setting. ‡‡ Active: Choose "Active" to return to normal standby. ‡‡ Eco: Choose "Eco." to save power
  • Optoma WU334 | WU334_UM - Page 44
    in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. HDMI Apmlifier HDMI DVD Player ". Inclusive of TV Set to "Yes" if you prefer both TV and projector to be automatically turned off at the same time. To prevent both devices
  • Optoma WU334 | WU334_UM - Page 45
    contrast, sleep timer, color matching, color temp, gamma, projection, lamp settings, zoom, freeze, and MHL. Setup projector ID menu Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command. Setup options menu Language Select
  • Optoma WU334 | WU334_UM - Page 46
    PROJECTOR the Keypad will be locked. However, the projector can be operated by the remote control. projector is powered on. ‡‡ Default: The default startup screen. ‡‡ Neutral: Logo is not displayed on startup screen. ‡‡ User DHCP function. ‡‡ On: Projector will obtain an IP address automatically
  • Optoma WU334 | WU334_UM - Page 47
    address. Open the web browser in your PC and type in the projector's IP address ("Network > LAN > IP Address"). Enter the user name and password, and click "Login". The projector's configuration web interface opens. ‡‡ The default user name and password is "admin". ‡‡ The steps in this section is
  • Optoma WU334 | WU334_UM - Page 48
    manage: Power On / Off, brightness, and contrast settings. Also, you can view the projector status information, such as: Video- Source, Sound-Mute, etc. Projector (Ethernet) Wired LAN terminal functionalities This projector can be controlled by using a PC (laptop) or other external device via LAN
  • Optoma WU334 | WU334_UM - Page 49
    be connected to the LAN / RJ45 port and remote control the projector, as well as the supported commands for these external devices, please contact the Support-Service directly. LAN RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). 2. On the PC (Laptop), select Start
  • Optoma WU334 | WU334_UM - Page 50
    THE PROJECTOR 3. Right-click on the Local Area Connection, and select Property. 4. In the Properties window, select the General tab, and select Internet Protocol (TCP / IP). 5. Click "Properties". 6. Type in the IP address and Subnet mask, then press "OK". 7. Press the "Menu" button on the projector
  • Optoma WU334 | WU334_UM - Page 51
    Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher installed. 12. In the Address bar, input the projector's IP address: 192.168.0.100. 13. Press "Enter". The projector is setup for remote management. The LAN / RJ45 function displays as follows: Information page Main page English 51
  • Optoma WU334 | WU334_UM - Page 52
    RS232 by Telnet Function There is alternative RS232 command control way, in projector so called "RS232 by TELNET" for LAN / RJ45 interface. Quick Start-Guide for "RS232 by Telnet" ‡‡ Check and get the IP address on OSD of the projector. ‡‡ Make sure that the PC / laptop can access the web-page of
  • Optoma WU334 | WU334_UM - Page 53
    projector) 3. If Telnet-Connection ready, and user can have RS232 command input, then "Enter" key pressed, the RS232 command will be workable. Specification for "RS232 by TELNET": 1. Telnet: TCP. 2. Telnet port: 23 (for more detail, kindly please get contact with the service the projector
  • Optoma WU334 | WU334_UM - Page 54
    of use, a warning message will appear on the screen. Warning Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing
  • Optoma WU334 | WU334_UM - Page 55
    2 6. Unscrew the screw on the lamp module. 3 7. Lift up the lamp handle. 4 8. Remove the lamp cord. 5 9. Remove the lamp module carefully. 6 10. To replace the lamp module, reverse the previous steps. 11. Turn on the projector and reset the lamp timer. 12. Lamp Reset: (i) Press "Menu"  (ii) Select
  • Optoma WU334 | WU334_UM - Page 56
    dust filter every three months. Clean it more often if the projector is used in a dusty environment. Lamp replacing Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Disconnect the power cord. 3. Remove the dust filter
  • Optoma WU334 | WU334_UM - Page 57
    60Hz 1280x720 @ 60Hz 1280x720 @ 120Hz 1600x1200 @ 60Hz Native timing: XGA: 1024x768 @ 60Hz WXGA: 1280x800 @ 60Hz; 1280x720 @ 60Hz 1080P: 1920x1080 @ 60Hz WUXGA: 1920x1200 @ 60Hz B1/Video Mode B1/Detail Timing 720x480p @ 60Hz 1280x720p @ 60Hz 1366x768 @ 60Hz 1920x1080i @ 50Hz 1920x1080p @ 60Hz B1
  • Optoma WU334 | WU334_UM - Page 58
    @ 60Hz 1280x720 @ 60Hz 1280x720 @ 120Hz 1600x1200 @ 60Hz 1080P and WUXGA: 1280x720 @ 60Hz 1280x800 @ 60Hz 1280x1024 @ 60Hz 1400x1050 @ 60Hz 1600x1200 replay with integral multiple with 3D mode. ‡‡ Support NVIDIA 3DTV Play if there is no patent fee from Optoma. 1080i@25hz and 720p@50hz will run in
  • Optoma WU334 | WU334_UM - Page 59
    ADDITIONAL INFORMATION Image size and projection distance WUXGA Desired Distance (m) 1.2 2 2.5 3 3.5 4 5 6 7 8 9 10 Screen 135 258 x 162 323 x 202 431 x 269 538 x 337 646 x 404 680 x 425 Distance (m) Max zoom Min zoom 1.2 1.3 1.6 1.7 1.9 2.1 2.2 2.4 2.5 2.8 2.8 3.1 3.2 3.5
  • Optoma WU334 | WU334_UM - Page 60
    100 199 x 112 221 x 125 266 x 149 332 x 187 443 x 249 553 x 311 664 x 374 680 x 383 Distance (m) Max zoom Min zoom 1.2 1.3 1.3 1.4 1.6 1.8 2.0 2.2 2.3 2.5 2.6 2.9 2.9 3.2 3.3 3.6 3.9 4.3 4.9 5.4 6.5 7.2 8.1 9.0 9.8 10.8 10.0 11.0 Top (cm) From base to top of image 53
  • Optoma WU334 | WU334_UM - Page 61
    and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: ‡‡ Screw type: M4*3 ‡‡ Minimum screw
  • Optoma WU334 | WU334_UM - Page 62
    ) -CA (for emulation of USB mouse via USB) C9 Press to display or exit the on-screen display menus for projector. 88 ‡‡ Press to adjust image distortion caused by tilting the projector. C7 ‡‡ Press to navigate down. Press to manually select a 3D mode that matches your 3D content. 93 62 English
  • Optoma WU334 | WU334_UM - Page 63
    choose video source. Press to select an input signal. Press to automatically adjust the picture brightness to give an optimum contrast performance. Automatically synchronize the projector to the input source. Key code 86 8E CE C3 87 C4 English 63
  • Optoma WU334 | WU334_UM - Page 64
    -key definition Description Power on/off Press to turn on / off the projector. Switch Press to switch the USB mouse on / off. Freeze Press to / unhide the screen picture and turn off / on audio. Press to freeze the projector image. Press to momentarily turn off / on the audio. L R Up arrow
  • Optoma WU334 | WU334_UM - Page 65
    + KeystoneVolume + Volume / 1 Menu/2 3D/3 HDMI/4 VGA/5 Video/6 User 1/7 User 2/8 User 3/9 Source / 0 Re-Sync Description Press to switch Display mode on or or exit the on-screen display menus for projector. ‡‡ Use as numeric keypad number "2". ‡‡ Press to manually select a 3D mode that matches your
  • Optoma WU334 | WU334_UM - Page 66
    definition Description ON Press to turn on the projector. 2E OFF Press to turn off the projector. 36 User1 65 User2 User defined keys. Please see page 45 to by tilting the projector. 64 Aspect ratio Press to change aspect ratio of a displayed image. 89 3D Manually select a 3D mode
  • Optoma WU334 | WU334_UM - Page 67
    make adjustments to your selection. 18 Source Press "Source" to select an input signal. 0F Confirm your item selection. 04 Re-sync Automatically synchronizes the projector to the input source. 0C Volume - Adjust to decrease volume. Display or exit the on-screen display menus 0E Menu for
  • Optoma WU334 | WU334_UM - Page 68
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen ‡‡ Ensure all the cables and power connections
  • Optoma WU334 | WU334_UM - Page 69
    projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section on pages 54-55. Remote control problems see below) light up or flash, the projector will automatically shutdown: ‡‡ "LAMP" LED indicator is lit red and if
  • Optoma WU334 | WU334_UM - Page 70
    Lamp warning: Warning Lamp Warning Lamp life exceeded. ‡‡ Temperature warning: Warning TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact a service
  • Optoma WU334 | WU334_UM - Page 71
    ADDITIONAL INFORMATION ‡‡ Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact a service center for repair. ‡‡ Out of display range: HDMI Out Of Range ‡‡ Power down warning: Power Down Power Down Timer Active Power down in sec. ‡‡ Security
  • Optoma WU334 | WU334_UM - Page 72
    Lens Image size (diagonal) Projection distance Description 1080p/WUXGA Manual zoom and manual focus 1080p/WUXGA: - 22.9"~252" (overdrive .146 KHz - Vertical scan rate: 50~ 85 Hz (120Hz for 3D feature projector) Yes, 10W 100 - 240V AC 50/60Hz 2.9-1.0 A Mechanical Installation orientation Dimensions
  • Optoma WU334 | WU334_UM - Page 73
    ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com
  • Optoma WU334 | WU334_UM - Page 74
    www.optoma.com *36.7B001G001-A* P/N:36.7B001G001-A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
User manual
DLP
®
Projector