Optoma WU336 EH334 User Manual

Optoma WU336 Manual

Get Optoma WU336 PDF manuals and user guides View all Optoma WU336 manuals
Add to My Manuals
Save this manual to your list of manuals

Optoma WU336 manual content summary:

  • Optoma WU336 | EH334 User Manual - Page 1
    DLP® Projector User manual
  • Optoma WU336 | EH334 User Manual - Page 2
    menu...33 Display 3D menu...36 Display aspect ratio menu...36 Display edge mask menu...40 Display zoom menu...40 Display image shift menu...40 Display keystone menu...41 Audio mute menu...41 Audio volume menu...41 Setup projection menu...41 Setup screen type menu...41 Setup lamp settings menu
  • Optoma WU336 | EH334 User Manual - Page 3
    ...56 Image size and projection distance 58 Projector dimensions and ceiling mount installation 60 IR remote control 1 codes...61 IR remote control 2 codes...63 IR remote control 3 codes...65 Troubleshooting...67 Warning indicators...68 Specifications...71 Optoma global offices...72 English
  • Optoma WU336 | EH334 User Manual - Page 4
    the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction ‡‡ Do not stare into the beam, RG2. As with
  • Optoma WU336 | EH334 User Manual - Page 5
    unit to cool down. Follow instructions as described on pages 53-54. ‡‡ This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. ‡‡ Reset the "Lamp Reset" function from the on-screen display "Setup lamp settings" menu after replacing
  • Optoma WU336 | EH334 User Manual - Page 6
    ‡‡ Viewing in 3D projection may cause disorientation for some viewers. Accordingly, DO NOT place your 3D PROJECTOR near open stairwells, cables DLP logo are registered trademarks of Texas Instruments and BrilliantColorTM is a trademark of Texas Instruments. All other product names used in this manual
  • Optoma WU336 | EH334 User Manual - Page 7
    has been tested and found granted by the Federal Communications Commission, to operate this projector. Operation Conditions This device complies with Part 15 of 1999/5/EC (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding
  • Optoma WU336 | EH334 User Manual - Page 8
    supplied in some specific regions. Please consult your dealer for detailed information. Standard accessories  CD User Manual *(1)  Warranty Card *(2)  Basic User Manual Projector Remote control *(3) Power lead Documentation Note The remote control is shipped with the battery. *(1) For
  • Optoma WU336 | EH334 User Manual - Page 9
    the "inlet" and "outlet" labels. No Item 1. Lens 2. IR Receiver 3. Keypad 4. Lens Cap 5. Tilt-Adjustment Foot 6. Focus Ring 7. Ventilation (inlet) No Item 8. Zoom Lever 9. Lamp Cover 10. Ventilation (outlet) 11. KensingtonTM Lock Port 12. Power Socket 13. Input / Output English 9
  • Optoma WU336 | EH334 User Manual - Page 10
    2. HDMI 2 Connector 3. USB Power Out (5V 1A) Connector / MOUSE / SERVICE Connector 4. VGA Connector 5. Video Connector 6. AUDIO OUT Connector 7. AUDIO IN Connector Port 11. Power Socket Note: "√" means the item is supported, "N/A" means the item is not available. Type 1 (8 IO N/A √
  • Optoma WU336 | EH334 User Manual - Page 11
    Remote mouse requires special remote control. The I/Os depend on the projector you purchased, please check the physical product for reference. Keypad 1 2 3 9 12 4 11 5 6 10 No Item 1. On/Standby LED 2. Lamp LED 3. Temp LED 4. Information 5. Re-Sync 6. Four Directional Select Keys
  • Optoma WU336 | EH334 User Manual - Page 12
    18. Brightness Mode The actual remote control may vary depending on the region. Some keys may have no function for models that do not support these features. Before using the remote control for the first time, remove the transparent insulation tape. See page 20 for battery installation. CR2302V5OL
  • Optoma WU336 | EH334 User Manual - Page 13
    User1 User2 0 User3 26 14 Source Resync 27 15 Note: ‡‡ ‡‡ No Item 1. Power On / Off 2. Freeze 3. Display Blank / Audio Mute 4. Mouse Left Click 5. Enter 6. Mode 7. Page - 8. Keystone - / + 9. Menu 10 may have no function for models that do not support these features. English 13
  • Optoma WU336 | EH334 User Manual - Page 14
    4. Brightness 5. Keystone 6. Mute 7. DB (Dynamic Black) 8. Source 9. Enter 10. Menu 11. HDMI1 12. VGA1 (not supported) 13. VGA2 (not supported) 14. Power Off No Item 15. User 3 16. Contrast 17. Display Mode 18. Aspect Ratio 19. 3D Menu On / Off 20. Sleep Timer 21. Volume + 22. Re
  • Optoma WU336 | EH334 User Manual - Page 15
    mount. The projector should be horizontal and not tilted either forwards/backwards or left/right. Any other orientation will invalidate the warranty and may shorten the lifetime of the projector lamp or the projector itself. For none standard installation advise please contact Optoma. English 15
  • Optoma WU336 | EH334 User Manual - Page 16
    SETUP AND INSTALLATION Type 1 (8 IO) 12 3 4 5 6 MOLEX 13 12 7 11 10 14 MOLEX 8 16 English
  • Optoma WU336 | EH334 User Manual - Page 17
    SETUP AND INSTALLATION Type 2 (9 IO) 12 3 4 5 6 13 MOLEX 12 7 11 10 14 MOLEX 9 8 English 17
  • Optoma WU336 | EH334 User Manual - Page 18
    Cable 10. USB Cable (mouse control) 11. RS232 Cable 12. USB Power Cable 13. HDMI Stick 14. Power Cord Item Note: "√" means the item is supported, "N/A" means the item is not available. Type 1 (8 IO N/A Type 2 (9 IO 18 English
  • Optoma WU336 | EH334 User Manual - Page 19
    zoom lever clockwise or counterclockwise to increase or decrease the projected image size. ‡‡ To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and legible. Focus Ring Zoom Lever Note: The projector will focus at a distance of 1m to 10m. English 19
  • Optoma WU336 | EH334 User Manual - Page 20
    case clean and install new battery. ‡‡ Risk of an explosion if battery is replaced by an incorrect type. ‡‡ Dispose of used battery according to the instructions. 20 English
  • Optoma WU336 | EH334 User Manual - Page 21
    remote controller might become malfunction. ‡‡ If the remote control is close to Inverter-Type fluorescent lamps, it might become ineffective from time to time. ‡‡ If the remote control and the projector are within a very short distance, the remote control might become ineffective. ‡‡ When you aim
  • Optoma WU336 | EH334 User Manual - Page 22
    , you will be prompted to select the preferred language, projection orientation, and other settings. Powering off 1. Turn off the projector by pressing the " " either on the projector keypad or the remote control. 2. The following message will be displayed: Power Off Power Off? Press power key again
  • Optoma WU336 | EH334 User Manual - Page 23
    source Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, push the source button on the projector keypad or the remote control to select the desired
  • Optoma WU336 | EH334 User Manual - Page 24
    open the OSD menu, press on the remote control or the projector keyboard. 2. When OSD is displayed, use keys to select any item in the main menu. The OSD menu will close and the projector will automatically save the new settings. Sub Menu Settings Display Main Menu Image Settings 3D Aspect
  • Optoma WU336 | EH334 User Manual - Page 25
    USING THE PROJECTOR OSD Menu tree Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Display Mode [Data] Wall Color Display Brightness Contrast Sharpness Color Tint Image Settings Gamma Film Video Graphics Standard(2.2) 1.8 2.0 2.4 BrilliantColorTM Color Temperature [Data mode]
  • Optoma WU336 | EH334 User Manual - Page 26
    Bias Blue Bias Reset Color Settings Exit Color Space [Not HDMI Input] Display Image Settings Signal Color Space [HDMI Input] White Level Black Level IRE Automatic Frequency Phase H. Position V. Position Exit Brightness Mode [Lamp Base - Data] Reset Values Cancel [Default] Yes -50~50 -50~50
  • Optoma WU336 | EH334 User Manual - Page 27
    PROJECTOR Main Menu Sub Menu Sub Menu 2 3D Mode Sub Menu 3 3D->2D 3D 3D Format Display 3D sync invert Aspect Ratio Edge Mask Zoom H Image shift V Keystone Audio Mute Volume Projection Setup Screen Type [WUXGA model] Lamp Settings Lamp Reminder Lamp Reset Sub Menu 4 Values Off DLP
  • Optoma WU336 | EH334 User Manual - Page 28
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Optional Filter Installed Filter Usage Hours Sub Menu 3 Filter Settings Filter Reminder Sub Menu 4 Setup Filter Reset Direct Power
  • Optoma WU336 | EH334 User Manual - Page 29
    Green Grid Magenta Grid White Grid White Off On Off HDMI 2 Test Pattern LAN (Type 2 (9 IO) only) Brightness Contrast Sleep Timer [Default] Color Matching Color Temp Gamma Projection Lamp Settings Zoom Freeze MHL HDMI 2 Test Pattern LAN (Type 2 (9 IO) only) Brightness Contrast Sleep Timer Color
  • Optoma WU336 | EH334 User Manual - Page 30
    2 Sub Menu 3 Remote Settings [depends on remote] User3 Projector ID Setup Options Language Sub Menu 4 Values HDMI 2 Test Pattern LAN (Type 2 (9 IO) only) Brightness Contrast Sleep Timer Color Matching Color Temp [Default] Gamma Projection Lamp Settings Zoom Freeze MHL 0~99 English [Default
  • Optoma WU336 | EH334 User Manual - Page 31
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Closed Captioning Sub Menu 3 Menu Settings Menu Location Menu Timer Auto Source Setup Options Input Source HDMI1/MHL Input Name HDMI2 VGA Video High Altitude Display Mode Lock Keypad Lock Information Hide Logo Sub Menu 4 Values
  • Optoma WU336 | EH334 User Manual - Page 32
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Setup Options Reset LAN Network (Type 2 (9 IO) only) Control Background Color Reset OSD Reset to Default Network
  • Optoma WU336 | EH334 User Manual - Page 33
    Refresh Rate Display Mode Power mode (Standby) Lamp Hours Information Network Status IP Address Projector ID Filter ‡‡ The "Lamp Reset" in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service mode. The Projection Hours in service mode will not be reset. Each display mode can
  • Optoma WU336 | EH334 User Manual - Page 34
    USING THE PROJECTOR ‡‡ User: Memorize user's settings. ‡‡ 3D: To experience the 3D effect, you need to have 3D glasses. Make sure your PC/portable device has a 120 Hz
  • Optoma WU336 | EH334 User Manual - Page 35
    for tuning and saving the settings. ‡‡ Frequency: Change the display data frequency to match the frequency of your computer's graphic card for RGB/Component input sources. Brightness Mode (Lamp base data) Adjust the brightness mode settings for lamp-based projectors. ‡‡ Bright: Choose "Bright" to
  • Optoma WU336 | EH334 User Manual - Page 36
    USING THE PROJECTOR Reset Return the factory default settings for color settings. Display 3D menu 3D Mode Use this option to disable the 3D function or select the appropriate the 3D function. ‡‡ Off: Select "Off" to turn off 3D mode. ‡‡ DLP-Link: Select to use optimized settings for DLP 3D Glasses.
  • Optoma WU336 | EH334 User Manual - Page 37
    boarder will change in size depending on the aspect ratio. Black bars WUXGA active area 1080p active area WUXGA 1920x1200 pixels 1080p 1920x1080 pixels For projectors with a resolution of WUXGA (1920 × 1200) Format 16:10 Aspect ratio 16:9 Native 16:9 Full Zoom Auto 4:3 English 37
  • Optoma WU336 | EH334 User Manual - Page 38
    also allows you to watch a 2.35:1 content (include Anamorphic DVD and HDTV film source) that supports anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Lamp power and vertical resolution are fully utilized. To use the superwide format, do the
  • Optoma WU336 | EH334 User Manual - Page 39
    USING THE PROJECTOR WUXGA scaling table (screen type 16:10): Note: ‡‡ Supported screen type 16:10 (1920 x 1200), 16:9 . 16x10 Scale to 1920x1200. LBX Scale to 1920x1440, then get the central 1920x1200 image to display. Native mode -1:1 mapping centered. Auto -No scaling will be made;
  • Optoma WU336 | EH334 User Manual - Page 40
    USING THE PROJECTOR WUXGA scaling table (screen type 16:9): 16 : 9 screen 4x3 16x9 LBX Native mode Auto 480i/p 576i/p 1080i/p 720p PC Scale to 1440x1080. Scale to 1920x1080. Scale to 1920x1440, then get the central 1920x1080 image to display. -1:1 mapping centered. -No scaling will be
  • Optoma WU336 | EH334 User Manual - Page 41
    Setup projection menu Projection Select the preferred projection lamp settings menu Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Lamp Reset Resets the lamp
  • Optoma WU336 | EH334 User Manual - Page 42
    USING THE PROJECTOR Setup filter settings menu Optional Filter Installed Set the warning message setting. ‡‡ Yes: Display warning message after 500 hours of use. Note: "Filter Usage Hours / Filter Reminder / Filter Reset" will only appear when "Optional Filter Installed" is "Yes". ‡‡ No:
  • Optoma WU336 | EH334 User Manual - Page 43
    in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. HDMI Apmlifier HDMI DVD Player ". Inclusive of TV Set to "Yes" if you prefer both TV and projector to be automatically turned off at the same time. To prevent both devices
  • Optoma WU336 | EH334 User Manual - Page 44
    test pattern, LAN, brightness, contrast, sleep timer, color matching, color temp, gamma, projection, lamp settings, zoom, freeze, and MHL. Setup projector ID menu Projector timer settings. ‡‡ Menu Location: Select the menu location on the display screen. ‡‡ Menu Timer: Set the duration where the OSD
  • Optoma WU336 | EH334 User Manual - Page 45
    . If changes are made, they will take effect the next time the projector is powered on. ‡‡ Default: The default startup screen. ‡‡ Neutral: Logo is not displayed on startup screen. Background Color Use this function to display a blue, red, green, grey color, none, or logo screen when no signal
  • Optoma WU336 | EH334 User Manual - Page 46
    , gateway, and DNS configuration manually. Note: Exiting OSD will automatically apply the entered values. IP Address Display the IP address. Subnet Mask Display subnet mask number. Gateway Display the default gateway of the network connected to the projector. DNS Display the DNS number. How to
  • Optoma WU336 | EH334 User Manual - Page 47
    manage: Power On / Off, brightness, and contrast settings. Also, you can view the projector status information, such as: Video- Source, Sound-Mute, etc. Projector (Ethernet) Wired LAN terminal functionalities This projector can be controlled by using a PC (laptop) or other external device via LAN
  • Optoma WU336 | EH334 User Manual - Page 48
    be connected to the LAN / RJ45 port and remote control the projector, as well as the supported commands for these external devices, please contact the Support-Service directly. LAN RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). 2. On the PC (Laptop), select Start
  • Optoma WU336 | EH334 User Manual - Page 49
    PROJECTOR 3. Right-click on the Local Area Connection, and select Property. 4. In the Properties window, select the General tab, and select Internet Protocol (TCP / IP). 5. Click "Properties". 6. Type in the IP address and Subnet mask, then press "OK". 7. Press the "Menu" button on the projector
  • Optoma WU336 | EH334 User Manual - Page 50
    Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher installed. 12. In the Address bar, input the projector's IP address: 192.168.0.100. 13. Press "Enter". The projector is setup for remote management. The LAN / RJ45 function displays as follows: Information page Main page 50 English
  • Optoma WU336 | EH334 User Manual - Page 51
    RS232 by Telnet Function There is alternative RS232 command control way, in projector so called "RS232 by TELNET" for LAN / RJ45 interface. Quick Start-Guide for "RS232 by Telnet" ‡‡ Check and get the IP address on OSD of the projector. ‡‡ Make sure that the PC / laptop can access the web-page of
  • Optoma WU336 | EH334 User Manual - Page 52
    kindly please get contact with the service agent or team). 3. Telnet utility: projector information as listed below: ‡‡ Regulatory ‡‡ Serial Number ‡‡ Source ‡‡ Resolution ‡‡ Refresh Rate ‡‡ Display Mode ‡‡ Power Mode (Standby) ‡‡ Lamp Hours ‡‡ Network Status (Type 2 only) ‡‡ IP Address ‡‡ Projector
  • Optoma WU336 | EH334 User Manual - Page 53
    of use, a warning message will appear on the screen. Warning Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing
  • Optoma WU336 | EH334 User Manual - Page 54
    2 6. Unscrew the screw on the lamp module. 3 7. Lift up the lamp handle. 4 8. Remove the lamp cord. 5 9. Remove the lamp module carefully. 6 10. To replace the lamp module, reverse the previous steps. 11. Turn on the projector and reset the lamp timer. 12. Lamp Reset: (i) Press "Menu"  (ii) Select
  • Optoma WU336 | EH334 User Manual - Page 55
    dust filter every three months. Clean it more often if the projector is used in a dusty environment. Lamp replacing Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Disconnect the power cord. 3. Remove the dust filter
  • Optoma WU336 | EH334 User Manual - Page 56
    ADDITIONAL INFORMATION Compatible resolutions Digital compatibility B0/Established Timing 720x400 @ 70Hz 640x480 @ 60Hz 640x480 @ 67Hz 640x480 @ 72Hz 640x480 @ 75Hz 800x600 @ 56Hz 800x600 @ 60Hz 800x600 @ 72Hz 800x600 @ 75Hz 832x624 @ 75Hz 1024x768 @ 60Hz 1024x768 @ 70Hz 1024x768 @ 75Hz 1280x1024
  • Optoma WU336 | EH334 User Manual - Page 57
    format is Frame sequential ‡‡ If 3D input is 1080p@24hz, the DMD should replay with integral multiple with 3D mode. ‡‡ Support NVIDIA 3DTV Play if there is no patent fee from Optoma. 1080i@25hz and 720p@50hz will run in 100 hz; other 3D timing will run in 120hz. ‡‡ 1080p@24hz will
  • Optoma WU336 | EH334 User Manual - Page 58
    ADDITIONAL INFORMATION Image size and projection distance WUXGA Desired Distance (m) 1.2 2 2.5 3 3.5 4 5 6 7 8 9 10.2 Screen size (Min zoom) Diagonal (inch) W (cm) x H (cm) 27.06 45 56 68 79 90 113 135 158 180 203
  • Optoma WU336 | EH334 User Manual - Page 59
    ADDITIONAL INFORMATION 1080p Desired Distance (m) 1.2 2 2.5 3 3.5 4 5 6 7 8 9 10.5 Screen size (Min zoom) Diagonal (inch) W (cm) x H (cm) 26.33 44 55 66 77 88 110 132 154 176 197 230 58 x 33 97 x 55 121 x 68 146 x 82 170 x 96 194 x 109 243 x 137 291 x 164 340 x 191 389 x 219 437 x 246 510 x
  • Optoma WU336 | EH334 User Manual - Page 60
    and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: ‡‡ Screw type: M4*3 ‡‡ Minimum screw
  • Optoma WU336 | EH334 User Manual - Page 61
    ) -CA (for emulation of USB mouse via USB) C9 Press to display or exit the on-screen display menus for projector. 88 ‡‡ Press to adjust image distortion caused by tilting the projector. C7 ‡‡ Press to navigate down. Press to manually select a 3D mode that matches your 3D content. 93 Press to
  • Optoma WU336 | EH334 User Manual - Page 62
    ADDITIONAL INFORMATION Key legend Source Brightness mode ReSync Description Press to select an input signal. Press to automatically adjust the picture brightness to give an optimum contrast performance. Automatically synchronize the projector to the input source. Key code C3 87 C4 62 English
  • Optoma WU336 | EH334 User Manual - Page 63
    VGA 8 User2 0 3 3D 6 Video 9 User3 Resync Key Power Switch Display blank / audio mute Freeze Mute Mouse left click L Mouse right click R Four unhide the screen picture and turn off / on audio. Press to freeze the projector image. Press to momentarily turn off / on the audio. L R Up arrow
  • Optoma WU336 | EH334 User Manual - Page 64
    / decrease the volume. ‡‡ Press to change aspect ratio of a displayed image. ‡‡ Use as numeric keypad number "1". ‡‡ Press to display or exit the on-screen display menus for projector. ‡‡ Use as numeric keypad number "2". ‡‡ Press to manually select a 3D mode that matches your 3D content. ‡‡ Use as
  • Optoma WU336 | EH334 User Manual - Page 65
    for optimized settings 05 Mode for different applications. Please see page 33. 07 Keystone Adjust image distortion caused by tilting the projector. 64 Aspect ratio Press to change aspect ratio of a displayed image. 89 3D Manually select a 3D mode that matches your 3D content. English 65
  • Optoma WU336 | EH334 User Manual - Page 66
    signal. 0F Confirm your item selection. 04 Re-sync Automatically synchronizes the projector to the input source. 0C Volume - Adjust to decrease volume. Display or exit the on-screen display menus 0E Menu for projector. 16 HDMI1 Press "HDMI1" to choose source from HDMI 1 / MHL connector
  • Optoma WU336 | EH334 User Manual - Page 67
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen ‡‡ Ensure all the cables and power connections
  • Optoma WU336 | EH334 User Manual - Page 68
    may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section on pages 53-54. Remote control problems If the remote control does not work ‡‡ Check the operating
  • Optoma WU336 | EH334 User Manual - Page 69
    ADDITIONAL INFORMATION LED lightning messages Message Standby state (Input power cord) Power on (Warming) Power on & Lamp lighting Power off (Cooling) Quick Resume (100 secs) Error (Lamp fail) Error (Fan failure) Error (Over Temp) Standby State (Burn in mode) Burnin (Warming) Burnin (Cooling) Power
  • Optoma WU336 | EH334 User Manual - Page 70
    is under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. ‡‡ Fan failed: Warning FAN LOCKED The projector will switch off automatically Please contact a service center for repair. ‡‡ Out of display range: HDMI Out Of Range ‡‡ Power
  • Optoma WU336 | EH334 User Manual - Page 71
    Native resolution Lens Image size (diagonal) Projection distance 1080p/WUXGA Manual zoom and manual focus 1080p: - 26"~299" WUXGA: 91.146 KHz - Vertical scan rate: 50~ 85 Hz (120Hz for 3D feature projector) Yes, 10W 100 - 240V AC 50/60Hz 2.9-1.0 A Mechanical Installation orientation Dimensions
  • Optoma WU336 | EH334 User Manual - Page 72
    ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Japan 888-289-6786 510-897-8601 [email protected] 3-25-18 0120-380-495 [email protected] www.os-worldwide.com
  • Optoma WU336 | EH334 User Manual - Page 73
    www.optoma.com *36.7AZ01G001-A* P/N:36.7AZ01G001-A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
User manual
DLP
®
Projector