Optoma X316 User Manual
Optoma X316 Manual
 |
View all Optoma X316 manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma X316 manual content summary:
- Optoma X316 | User Manual - Page 1
the Projector's Height ........ 15 Adjusting the Projector's Zoom / Focus 16 Adjusting Projection Image Size......... 16 User Controls Troubleshooting 47 Replacing the Lamp 53 Installing and Cleaning the Dust Filter 55 Compatibility Modes 56 Computer/Video/HDMI/Mac Compatibility 56 3D - Optoma X316 | User Manual - Page 2
to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma X316 | User Manual - Page 3
Please do not open or disassemble the projector as this may cause electric shock. ▀■ Warning- When replacing the lamp, please allow the unit to cool down. Follow instructions as described on pages 53-54. ▀■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the - Optoma X316 | User Manual - Page 4
Usage Notice Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: Block the - Optoma X316 | User Manual - Page 5
features may vary depending on model. ▀■ SVGA (800x600) / XGA (1024x768) / WXGA (1280X800) Native resolution ▀■ HD compatible - 720p and 1080p supported ▀■ BrilliantColorTM Technology ▀■ Kensington Lock ▀■ RS232 control ▀■ Rapid shutdown ▀■ Full 3D(*) (See page 57) ▀■ The Product Features shall be - Optoma X316 | User Manual - Page 6
customer service center. Projector Power Cord VGA Cable(*) CR2025 3V VGA Enter Menu Zoom Due to different applications in each Country, some regions may have different accessories. (*) The accessory depends on model's specifications. Battery Documentation : User's Manual - Optoma X316 | User Manual - Page 7
Introduction Product Overview Main Unit 11 12 14 3 5 6 10 8 The interface is subject to model's specifications. Do not block projector in/out air vents. 9 1. Focus Ring 2. Zoom Lever 3. IR Receiver 4. Control Panel 5. Input / Output Connections 6. KensingtonTM Lock Port 7. Ventilation - Optoma X316 | User Manual - Page 8
Introduction Control Panel 12 34 11 5 10 98 1. Source 2. Keystone Correction 3. Enter 4. Re-Sync 5. Help 6. Four Directional Select Keys 7. Temp LED 8. Power 9. On/Standby LED 10. Lamp LED 11. Menu 6 7 English 8 - Optoma X316 | User Manual - Page 9
through Output) ™™ Monitor loop 4. VGA2-IN/YPbPr Connector through only support in VGA1-IN/ YPbPr. 5. (PC Analog Signal/Component Video Input Connector (*) Security Lock Slot Audio2 Input Connector (3.5mm mini jack) Optoma service for details. ™™ (*) for optional. ™™ Remote mouse requires - Optoma X316 | User Manual - Page 10
insulation tape. See page 19 for battery installation. CR2302V5OL VGA Enter Menu Zoom 11 1. Source 2. Re-Sync 3. Video and S-Video 12 4. HDMI 13 5. 3D 6. Volume +/- 14 7. Four Directional Select 15 Keys 6 8. Menu 9. AV Mute 16 10. Mute 17 11. IR LED Indicator 14 12. Power On/Off - Optoma X316 | User Manual - Page 11
Installation Connecting the Projector Connect to Computer/Notebook Monitor Output Audio Output 2 3 4 VGA-OUT VGA2-IN/YPbPr VGA1-IN/YPbPr/ S-VIDEO 1 5 VIDEO HDMI AUDIO1-IN RS-232C AUDIO-OUT - Optoma X316 | User Manual - Page 12
Installation Connect to Video Sources Composite Video Output S-Video Output DVD Player, Set-top Box, HDTV receiver 1 2 S-VIDEO VGA-OUT VGA2-IN/YPbPr VGA1-IN/YPbPr/ 3 4 VIDEO HDMI AUDIO1-IN RS-232C AUDIO-OUT AUDIO2-IN USB Due to the difference in applications for each country, some - Optoma X316 | User Manual - Page 13
) is set to Eco ( - Optoma X316 | User Manual - Page 14
. Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: Contact the "LAMP" LED indicator is lit red and if "On/Standby" indicator nearest service center if the projector displays these symptoms. See pages 64-65 for more flashes amber - Optoma X316 | User Manual - Page 15
for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring - Optoma X316 | User Manual - Page 16
in or out. To focus the image, rotate the focus ring until the image is clear. SVGA/XGA series: The projector will focus at distances from 3.28 to 39.4 feet (1.0 to 12.0 meters). WXGA series: The projector will focus at distances from 3.28 to 39.4 feet (1.0 to 12.0 meters). Zoom Lever Focus Ring - Optoma X316 | User Manual - Page 17
Installation SVGA/XGA Diagonal length (inch) size of 4:3 Screen 30.00 40 2.42 152.60 95.38 5.38 3.37 211.95 132.47 6.46 4.04 254.33 158.96 This table is for user's reference only. Projection Distance (D) (m) (feet) wide tele wide tele 1.00 1.10 3.26 3.62 1.33 1.47 4.35 4.83 - Optoma X316 | User Manual - Page 18
OSD menu is not shown). Use to select items or make adjust- ments to your selection. Use to adjust image distortion caused by tilting the projector. (±40 degrees) Indicate the projector's lamp status. Temp LED Indicate the projector's temperature status. ON/STANDBY LED Indicate the - Optoma X316 | User Manual - Page 19
User Controls Remote Control Battery Installation 1. Press firmly and slide the battery cover off. MnO2- wipe the case clean and install new battery. `` Risk of an explosion if battery is replaced by an incorrect type. `` Dispose of used battery according to the instructions. 19 English - Optoma X316 | User Manual - Page 20
an input signal. Re-Sync Automatically synchronizes the projector to the input source. Video Press "Video" to choose Composite Video and S-video source. HDMI 3D Press "HDMI" to choose HDMI source. (For certain model) Press the "3D" to turn the 3D OSD menu on/ off. Four Directional Select Keys - Optoma X316 | User Manual - Page 21
User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the "?" button on the control panel to open the Help Menu. 21 English - Optoma X316 | User Manual - Page 22
User Controls Help menu button functions only when no input source is detected. Please refer to the "Troubleshooting" section on pages 47-52 for more details. If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems. English 22 - Optoma X316 | User Manual - Page 23
User Controls 23 English - Optoma X316 | User Manual - Page 24
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or - Optoma X316 | User Manual - Page 25
) V. Position (VGA) Exit Presentation / Bright / Movie / sRGB / Blackboard / User / 3D -50~50 -50~50 1~15 -50~50 -50~50 Film / Video / 10 / Native / AUTO 0~10 -5~25 (80%~200%) -100~100 -100~100 -40~40 Off / DLP-Link 3D / L / R Auto / SBS / Top and Bottom / Frame Sequential On / Off English / Deutsch - Optoma X316 | User Manual - Page 26
" is only supported in Analog VGA (RGB) signal. (#3) For HDMI Source only. (#4) For XGA model only. (#5) For WXGA model only. 16:9 or 16:10 depend on "Screen Type" setting. (#6) "3D Sync Invert" is only available when 3D is enabled and this mode 3D is for DLP link glass only. (#7) The - Optoma X316 | User Manual - Page 27
mode should be selected to achieve optimum color settings when projecting onto a blackboard (green). User: User's settings. 3D: Recommend setting for 3D mode enabled. Any further ad- justments by the user in 3D will be saved in this mode for further use. Brightness Adjust the brightness of the - Optoma X316 | User Manual - Page 28
User Controls "Color" and "Tint" functions are only supported under Video mode. Sharpness Adjust the sharpness of the image. Press the to decrease the sharpness. Press the to increase the sharpness. Color Adjust a video - Optoma X316 | User Manual - Page 29
User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been fine-tuned to bring out the best image quality for the - Optoma X316 | User Manual - Page 30
User Controls R ed/Green/Blue/Cyan/Magenta/Yellow: Use or to select Hue, Saturation and Gain Colors. W hite: Use or to select Red, Green and Blue - Optoma X316 | User Manual - Page 31
Phase, frequency items are grayed out, and if Signal is not automatic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Synchronize the signal timing of the display with the graphic card. If the - Optoma X316 | User Manual - Page 32
User Controls DISPLAY English 32 Format Use this function to choose your desired aspect ratio. SVGA/XGA 4:3: This format is for 4×3 Automatically selects the appropriate display format. Auto Input resolution H V Auto/Scale (SVGA) H V Auto/Scale (XGA) H V 640 480 800 600 1024 768 - Optoma X316 | User Manual - Page 33
User Controls Aspect ratio (source detected) 4:3 16:9 Native Resize image (SVGA) Resize image (XGA) 800 x 600 center 1024 x any scaling. AUTO: Automatically selects the appropriate display format. Auto Input resolution Screen Type = 16:10 Auto/Scale Screen Type = 16:9 Auto/Scale - Optoma X316 | User Manual - Page 34
User Controls 16:10 Screen 4:3 16:10 Native 480i/p 576i/p 1:1 mapping centered. 1080i/p 720p 1066 x 800 center 1280 x 800 center 1:1 mapping (960 x 540) display 1280 x 800 - Optoma X316 | User Manual - Page 35
User Controls DISPLAY | 3D "3D Sync Invert" is only available when 3D is enabled and this mode 3D is for DLP link glass only. Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing. See page 57 for supported 3D formats. 3D Mode O ff: Select "Off" to turn - Optoma X316 | User Manual - Page 36
User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. - Optoma X316 | User Manual - Page 37
Choose the menu location on the display screen. Screen Type Choose the screen type from16:10 or 16:9. Projector ID ID definition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Refer to pages 58-62 for the complete list of RS232 commands. 37 English - Optoma X316 | User Manual - Page 38
User Controls SETUP | Security "Security" depends on model's specifications. Password default value is "1234" (first time). Security On: Choose "On" to use security verification when turning on the projector. Off: Choose "Off" to be able to switch on the projector without password - Optoma X316 | User Manual - Page 39
User Controls If the incorrect password is entered 3 times, the projector will automatically shut down. If you have forgotten your password, please contact your local office for support. 39 English - Optoma X316 | User Manual - Page 40
User Controls SETUP | Audio Settings Internal Speaker Choose the "On" or "Off" to . Press the to increase the volume. Audio Input The default audio inputs are on the back panel of the projector. Use this option to reassign any of the Audio Inputs to the current image source. Default: VGA1/VGA2. - Optoma X316 | User Manual - Page 41
User Controls SETUP | Advanced Logo Press to capture an image of the picture currently displayed on screen. If changes are made they will take effect the next time the projector . If changes are made they will take effect the next time the projector is powered on. Off: select "Off" to turn off the - Optoma X316 | User Manual - Page 42
User Controls OPTIONS To turn off the keypad lock, press and hold "Enter" key on top of the projector for 5 seconds. Input the keypad lock function is "On", the control panel will be locked however, the projector can be operated by the remote control. By selecting "Off", you will be able to - Optoma X316 | User Manual - Page 43
User Controls (*) The function depends on model's specifications. IR Function(*) O n: Choose "On", the projector can be operated by the remote control. When you change the setting from "Off" to "On", it will display a warning message: O ff: Choose "Off", you - Optoma X316 | User Manual - Page 44
powered on again, if selected within a period of 100 seconds. Off: The fan will start cooling the system immediately when user turns off the projector. Power Mode (Standby) Eco.: Choose "Eco." to save power dissipation further < 0.5W. Active: Choose "Active" to return to normal standby - Optoma X316 | User Manual - Page 45
to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. When ambient temperature is over 40°C in operating, the projector will switch to Eco automatically. Brightness Mode BRIGHT: Choose "BRIGHT - Optoma X316 | User Manual - Page 46
User Controls OPTIONS | Optional Filter Settings Optional Filter Installed Select "Yes" to display warning message after 500 hours of use. Select "No" to turn off warning message. The default setting for Filter is "No". After assembling filter, please turn on the projector then press "Menu", go to " - Optoma X316 | User Manual - Page 47
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen Ensure all the cables and power connections are correctly and securely - Optoma X316 | User Manual - Page 48
[Fn]+[F5] Mac Apple: System Preference Display Arrangement Mirror display If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. The screen of the Notebook or PowerBook computer is not displaying your presentation If you - Optoma X316 | User Manual - Page 49
:9 (wide) aspect ratio type on your DVD player. Image is too small or too large Adjust the Zoom Ring on the top of the projector. Move the projector closer to or further from the screen. Press "Menu" button on the remote control, go to "Display Format" and try the different settings. Use - Optoma X316 | User Manual - Page 50
3D glasses is turned on. When the input signal is HDMI 1.3 2D (1080i side-by-side half), press "3D Format" button and switch to "SBS". Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector - Optoma X316 | User Manual - Page 51
State (Input power cord) Power on (Warming) ON/STANDBY LED (Green/Amber) Amber Flashing Green Lamp lighting Green Power off (Cooling) Error (Over Temp.) Steady light No light Error (Fan fail) Error (Lamp fail) Flashing Green Flashing Amber Flashing Amber Flashing Amber Temp-LED (Red - Optoma X316 | User Manual - Page 52
and vertically of one of the IR receivers on the projector. Make sure there are not any obstructions between the remote control and the projector. Move to within 7 m (±0°) of the projector. Make sure the batteries are inserted correctly. Replace batteries if they are exhausted. English 52 - Optoma X316 | User Manual - Page 53
Replacing the Lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector - Optoma X316 | User Manual - Page 54
turned on if the lamp 6 cover has not been placed back on the projector. Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it 1 was accidentally touched. 2 5 3 4 7 Lamp Replacement Procedure: 1. Switch off - Optoma X316 | User Manual - Page 55
is used in a dusty environment. Procedure: 1. Switch off the power to the projector by pressing the " " button. 2. Disconnect the power cord. 3. Remove the dust filter slowly and carefully. 4. Clean or replace the dust filter. 5. To install the dust filter, reverse the previous steps. 6. Reset - Optoma X316 | User Manual - Page 56
note that using resolutions other than native 800 x 600 (SVGA model), 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result in some loss of image clarity. ™™ (*1) 1920 x1200 @60Hz only support RB (reduced blanking). ™™ (*2) 3D timing for True 3D projector. ™™ (*3) is not supported HDMI input - Optoma X316 | User Manual - Page 57
(Half) 1920 x 1080p @ 24 Hz Top-and-Bottom Input Resolution 1920 x 1080p @ 24 Hz 1920 x 1080i @ 50Hz 1920 x 1080i @ 60Hz 1280 x 720p @ 50Hz Frame packing While 3D Format is Side-by-Side (Half) "SBS" 1280 x 720p @ 60Hz HDMI 1.3 3D Content 1920 x 1080i @ 50Hz 1920 x 1080i @ 60Hz 1280 x 720p - Optoma X316 | User Manual - Page 58
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments 9876 54321 Pin no. 1 2 3 4 5 6 7 8 9 Spec. (from projector side) N/A RXD TXD N/A GND N/A N/A N/A N/A English 58 - Optoma X316 | User Manual - Page 59
Projector Return (Pass): P Projector Return (Pass): P Projector Return (Fail): F Projector Return (Fail): F XX=01ˀ99, projector's ID, XX=00 is for all projectors SEND to projector 35 0D User ~XX20 7 7E 30 30 32 30 20 37 XX20 9 7E 30 30 32 30 20 39 0D 3D ~XX21 n 7E 30 30 32 31 20 a - Optoma X316 | User Manual - Page 60
33 30 20 30 0D 3D Mode OFF ~XX230 1 7E 30 30 32 33 30 20 31 0D 3D Mode DLP-Link ~XX400 0 7E 30 30 34 30 30 20 30 0D 3DШ2D 3D ~XX400 1 7E 30 30 30 30) ~9999 (a=7E 39 39 39 39) ~XX79 n 7E 30 30 37 39 20 a 0D Projector ID n = 00 (a=30 30) ~ 99 (a=39 39) ~XX80 1 7E 30 30 38 30 20 - Optoma X316 | User Manual - Page 61
34 30 20 34 37 0D Source SEND from projector automatically 232 ASCII Code HEX Code Function Projector Return Description System status INFOn n : 0/1/2/3/4/6/7/8 = Standby/Warming/Cooling/Out of Range/ Lamp fail/Fan Lock/Over Temperature/Lamp Hours Running Out 3 61 English - Optoma X316 | User Manual - Page 62
232 ASCII Code HEX Code Function Projector Return Description ~XX121 1 7E 30 30 31 32 Bright/Movie/sRGB/User/Blackboard/3D ~XX151 1 7E 30 30 31 35 31 20 31 0D Model name OKn n:1/2/3= SVGA/ XGA/ WXGA ~XX108 1 7E 30 30 31 30 38 20 31 0D Lamp Hours OKbbbb bbbb: Lamp Hour ~XX108 - Optoma X316 | User Manual - Page 63
Appendices Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M4*3 Minimum - Optoma X316 | User Manual - Page 64
Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Latin America 3178 Laurelview Ct. Fremont - Optoma X316 | User Manual - Page 65
Taiwan 12F., No.215, Sec. 3, Beixin Rd., +886-2-8911-8600 Xindian Dist., New Taipei City 231, +886-2-8911-6550 Taiwan, R.O.C. [email protected] www.optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong +852-2396-8968 - Optoma X316 | User Manual - Page 66
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this projector. English 66 - Optoma X316 | User Manual - Page 67
including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES- R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
6
Package Overview
..............................
6
Product Overview
...............................
7
Main Unit
..............................................
7
Control Panel
.......................................
8
Input/Output Connections
....................
9
Remote Control
..................................
10
Installation
.....................................
11
Connecting the Projector
..................
11
Connect to Computer/Notebook
........
11
Connect to Video Sources
.................
12
Powering the Projector On / Off
........
13
Powering On the Projector
.................
13
Powering off the projector
..................
14
Warning Indicator
...............................
14
Adjusting the Projected Image
..........
15
Adjusting the Projector’s Height
........
15
Adjusting the Projector’s Zoom /
Focus
.................................................
16
Adjusting Projection Image Size
........
16
User Controls
................................
18
Control Panel & Remote Control
......
18
Control Panel
.....................................
18
Remote Control Battery Installation ... 19
Remote Control
..................................
20
On-screen Display Menus
................
24
How to operate
..................................
24
Menu Tree
..........................................
25
IMAGE
...............................................
27
IMAGE | Advanced
............................
29
IMAGE | Advanced | Signal (RGB) ... 31
DISPLAY
............................................
32
DISPLAY | 3D
...................................
35
SETUP
...............................................
36
SETUP | Security
...............................
38
SETUP | Audio Settings
.....................
40
SETUP | Advanced
............................
41
OPTIONS
...........................................
42
OPTIONS | Advanced
........................
44
OPTIONS | Lamp Settings
.................
45
OPTIONS | Optional Filter Settings ... 46
Appendices
....................................
47
Troubleshooting
................................
47
Replacing the Lamp
..........................
53
Installing and Cleaning the
Dust Filter
.........................................
55
Compatibility Modes
.........................
56
Computer/Video/HDMI/Mac
Compatibility
......................................
56
3D Input Video Compatibility
.............
57
RS232 Commands and Protocol
Function List
.....................................
58
RS232 Pin Assignments
....................
58
RS232 Protocol Function List
............
59
Ceiling Mount Installation
..................
63
Optoma Global Offices
.....................
64
Regulation & Safety Notices
.............
66
Table of Contents