Oreck XL Professional Owners Guide - Page 7

ACCESSORIES & TROUBLESHOOTING CALL CUSTOMER SERVICE HOT LINE USA:1-800-989-3535 Canada: 1-888-676-7325 Whenever calling, please be sure to have your model from the data plate. Accessories (Sold Separately) ITEM 1. Pre-Filter 2. Ionizer/Electronic Collector Cell 3. Charcoal Odor Absorber (Set of 4) 4. Wall Mounting Kit 5. Oreck Fresh Air® Scent Cartridges Spring Mulberries®, 8pk. Blooming Jasmine®, 8pk. PART # 7780-8041 09-5510-7065 AT4PK7 8660-0201 FA2PK FA3PK USA: 1-800-989-3535 Canada: 1-888-676-7325 Outside the USA and Canada, contact your local Oreck Distributor. Troubleshooting Guide Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing the chart below. It pinpoints problems and how to correct them. Remember, check the simple things first. PROBLEM CHECK UNIT DOES NOT TURN 1. Power Cord ON 2. Selector Switch 3. Front Grill INDICATOR LIGHT ON Ionizer/Electronic UNIT IS FLASHING RED Collector Cell OR HAS TURNED RED RED INDICATOR LIGHT Ionizer/Electronic WILL NOT TURN OFF Collector Cell UNIT DOES NOT Ionizer/Electronic REMOVE POLLUTANTS Collector Cell UNIT SPARKS, Ionizer/Electronic CRACKLES AND POPS Collector Cell DOES NOT REMOVE Old Charcoal Odor ODOR Absorber UNIT STILL DOES NOT Check all the above OPERATE PROPERLY points WHAT TO DO 1. Plug in power cord 2. Set selector switch for desired blower speed. 3. Reinsert front grill until it is flush with cabinet front. Tap grill lightly, if necessary, to fully insert. Wash Collector Cell. Make sure it is thoroughly clean & dry before re-installing it. 1. Collector Cell may not be completely dry. 2. Cell may be damaged with a broken wire. 3. The "Dirty Cell" sensor may not be working correctly. 4. If you believe the Collector Cell is damaged or the unit is not working correctly, return the unit to the Service Center. Wash Collector Cell. Make sure it is thoroughly clean & dry before re-installing it. 1. Sparking or popping noise occurs when a large particle is captured in the Collector Cell. 2. If the unit is arcing excessively, the Cell may be dirty. Try cleaning the Collector Cell. 3. If excessive arcing continues after proper cleaning, the Collector Cell may be damaged or wet. Return unit to the Service Center. Replace Charcoal Odor Absorber. Return unit to the Service Center. ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER. 7