Oregon Scientific BAR388HGA-BK User Manual

Wireless Weather Station with

Temperature / Humidity Display and

Self-Setting Atomic Clock

Model: BAR388HGA

INTRODUCTION

Thank you for selecting this Oregon Scientific

TM

Wireless

Weather Station with Temperature / Humidity Display and

Self-Setting Atomic Clock (BAR388HGA). This clock is

supplied with a remote sensor (THGR122N) and can

support up to 3 sensors in total (additional sensors sold

separately).

NOTE

Please keep this manual handy as you use your new

product. It contains practical step-by-step instructions, as

well as technical specifications and warnings you should

know about.

CLOCK OVERVIEW

FRONT VIEW

1.

SNOOZE

2. Weather Forecast Area

3. Outdoor Temperature Area

4. Indoor Temperature Area

5. Clock / Alarm Area

6.

ALARM

: View alarm status; set alarm

�

±

²

³

´

µ

BACK VIEW

LCD DISPLAY

Weather Forecast Area:

�

±

²

³

´

µ

¶

Outdoor Temperature Area:

1. Heat index icon

2.

Hi / lo temperature alarm

3. Sensor reception icon

4. Sensor battery low

5. Max / min icon

6. Temperature display

7. Ice warning is active

8.

Hi / lo humidity alarm

9. Temperature trend

10. Humidity trend

11. Humidity display

�

±

²

³

´

µ

¶

·

¸

�¹

��

Indoor Temperature Area:

1. Indoor sensor icon

2. Max / min icon

3. Temperature display

4. Temperature trend

5. Humidity trend

6. Humidity display

�

±

²

³

´

µ

Clock / Alarm Area:

1. Alarm set

2. AM / PM icon

3. Clock signal reception

4. Low battery icon

5. Clock

6. Alarm mode icon

7. Moon phase

�

±

²

³

´

µ

¶

REMOTE SENSOR (THGR122N)

�

±

1. LCD

2. LED status indicator:

Blinks red during data

transmission

1. Wall mount hole

2.

RESET

hole

3.

CHANNEL

switch

4. Battery compartment

GETTING STARTED

BATTERIES

Insert batteries before first use, matching the polarity (+

and -). Press

RESET

after each battery change.

SENSOR DATA TRANSMISSION

indicates main unit batteries are low.

NOTE

Do not use rechargeable batteries. We recommend

that you use alkaline batteries with this product for longer

usage and lithium batteries in temperatures below

freezing.

REMOTE SENSOR

The sensor collects temperature readings approx. every

40 seconds and sends them to the main unit. The main

unit can collect data from up to 3 sensors.

To set up the sensor:

1. Remove the screws from the battery door.

2. Insert the batteries, matching the polarity

(+ / -).

3. Select a channel. Make sure you use a different channel

for each sensor.

4. Place the sensor near the main unit. Press

RESET

on

the sensor.

5. Simultaneously press

CHANNEL

and

MEM

on the main

unit to initiate signal sending between the sensor and

main unit.

6. Close the battery door and secure the screws.

7. Place the sensor in the desired location using the table

stand or wall mount.

For best results:

•

Place the sensor out of direct sunlight and moisture.

•

Do not place the sensor more than 30 m (100 ft) from

the main (indoor) unit.

•

Position the sensor so that it faces the main (indoor)

unit, minimizing obstructions such as doors, walls, and

furniture.

•

Place the sensor in a location with a clear view to the

sky, away from metallic or electronic objects.

•

Position the sensor close to the main unit during cold

winter months as below-freezing temperatures may

affect battery performance and signal transmission.

The sensor reception icon in the remote sensor area

shows the status.

ICON

DESCRIPTION

and “- - . -“

(Outdoor

temperature Area)

The sensor cannot be found.

Search for the sensor or check

batteries

To search for a sensor:

Simultaneously, press and hold

MEM

and

CHANNEL

for

2 seconds.

NOTE

If the sensor is still not found, check the batteries,

obstructions, and remote unit location.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its date and time

automatically once it is within range of the WWVB-60

signal from the atomic clock in Fort Collins, Colorado.

The clock collects the radio signals whenever it is within

3219 km (2000 miles) of a signal.

NOTE

Initial reception takes 2-10 minutes for first set up

or when

RESET

is pressed. Once complete, the reception

icon will stop blinking. If the signal is weak, it can take up

to 24 hours to get a valid signal.

RECEPTION SIGNAL

To enable and force a signal search:

Press and hold

for 2 seconds.

To disable the signal reception:

Press and hold

for 2 seconds.

STRONG SIGNAL

WEAK SIGNAL

NO SIGNAL

SET CLOCK

If the clock signal reception is enabled and a signal is being

received the clock does not need to be manually set.

1. Press and hold

MODE

for 2 seconds.

2. Press

or

to change the settings.

3. Press

MODE

to confirm.

4.

The settings order is: US time zone (Pacific (P), Eastern

(E), Central (C) and Mountain (M)) offest, hour, minute,

year, month, day and language.

NOTE

The language options are English

(E), German (D),

French (F), Italian (I), and Spanish (S).

Press

MODE

to choose between the clock with seconds

and clock with weekday display modes.

1. Pressure trend

2. Weather forecast

3. Comfort zone

4. Pressure icon

5. Altitude icon

6. Pressure / altitude unit

7. Heat index icon

USER MANUAL

1.

/

: Increase / decrease setting; activate /

deactivate clock reception signal

2.

MODE

: Change settings / display

3.

CHANNEL

: Switch remote sensor display

4.

MEM

:

View

current,

maximum

and

minimum

temperature / humidity

5.

PRESSURE

: Select pressure unit; set altitude

6.

HEAT INDEX

: Display heat index

7.

TEMP / HUMIDITY HI / LO

: Change settings or

enable / disable hi or lo temperature / humidity alarm

for channel 1

8.

°C / °F

: Select temperature unit

9.

RESET

: Reset unit to default settings

10. Battery compartment

The transmission range may vary depending on many

factors. You may need to experiment with various locations

to get the best results.

Standard Alkaline batteries contain significant amounts of

water. Because of this they will freeze in low temperatures

of approximately -12°C (10°F). Disposable Lithium

batteries have a much lower threshold for temperature

with an estimated freezing range of below -30°C (-22°F).

Wireless ranges can be impacted by a variety of factors

such as extremely cold temperatures. Extreme cold may

temporarily reduce the effective range between the sensor

and the base station. If the unit's performance fails due to

low temperature, the unit will resume proper functioning

as the temperature rises to within the normal temperature

range (i.e. no permanent damage will occur to the unit due

to low temperatures).

A channel has been found

and sensor signal is being

received

Main unit is searching

for the sensor(s)

Clock signal reception indicator:

�

±

²

³

´

µ

�¶

·

¸

¹

BAR388HGA_M_R5

2006.4.7, 4:35 PM

1

Oregon Scientific BAR388HGA-BK User Manual

Oregon Scientific BAR388HGA-BK Manual

Oregon Scientific BAR388HGA-BK manual content summary: