Panamax MIW-SURGE-1G Manual

Features:

• Fits most standard single-gang plastic or metal box.

• Uses standard wiring device screw-hole.

• Mounting Yoke.

Designed to mount to any standard outlet box.

• Decora Faceplate Interface.

This piece surrounds the receptacles and fits within

a standard cover plates Decora cutout.

• Bi-color Indicator LED.

Green = Power On

Red = Line Fault

• Mounting Screws. Two (2) 6-32 x .75” pan head

screws are pre-installed, with retention features,

to mount the unit to an outlet box.

• Both Outlets with Protect-or Disconnect Circuitry.

Caution, Before You Begin:

To avoid electrical shock or serious injury turn OFF all

power leading to your installation of MIW-SURGE-1G such as circuit breaker or switch.

Mounting:

1.

Wire nuts (included) are used to connect the three 6 inch

MIW-SURGE-1G wires. Connect the

black (HOT)

wire to the

black

wire from the wall outlet,

white (NEUTRAL)

to

white

and the

green (GROUND)

wire to the (typically bare)

ground wire.

2.

The MIW-SURGE-1G is then installed in the outlet box just like any duplex

receptacle or switch by driving the pre-attached screws into the outlet box.

3.

Outlet box compatibility. This product is designed

to fit into most standard metal or plastic outlet boxes.