Panasonic AG-AC160A Operating Instructions Advanced - Page 35
Native recording, Standard recording, menu [RECORDING SETUP] screen
View all Panasonic AG-AC160A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Shooting Native recording 1 Select the recording format [PH 1080/24P]*1 in the [REC FORMAT] item on the setup menu [RECORDING SETUP] screen (Page 89). 2 Turn the [VFR MODE] item on the setup menu [SCENE FILE] screen [ON], and set an optional recording frame rate in the [FRAME RATE] item (Page 83). 3 Press the button. Native recording starts in VFR mode. • When VFR mode is set, the audio cannot be recorded. [ ] will be displayed on the screen and the audio level meter will not be displayed. After recording starts, [VFR ON = NO AUDIO RECORDING] is displayed for five seconds. Audio is not output from the external output terminals. • If lower frame rate (12P or lower) is set, accessing the memory card after recording takes longer. Before ejecting a memory card, confirm that the memory card access lamp is not flashing. Standard recording 1 Select the recording format [PH 1080/30P]*1 or [PH 1080/25P]*2 in the [REC FORMAT] item on the setup menu [RECORDING SETUP] screen (Page 89). 2 Turn the [VFR MODE] item on the setup menu [SCENE FILE] screen [ON], and set an optional recording frame rate in the [FRAME RATE] item (Page 83). 3 Press the button. Standard recording starts in VFR mode. • When VFR mode is set, the audio cannot be recorded. [ ] will be displayed on the screen and the audio level meter will not be displayed. After recording starts, [VFR ON = NO AUDIO RECORDING] is displayed for five seconds. Audio is not output from the external output terminals. • 2:2 pull down recording will be applied for a recording frame rate of 30P or 25P. • If lower frame rate (12P or lower) is set, accessing the memory card after recording takes longer. Before ejecting a memory card, confirm that the memory card access lamp is not flashing. *1 When [SYSTEM FREQ] = [59.94Hz] *2 When [SYSTEM FREQ] = [50Hz] 35