Panasonic AG-AC160A Operating Instructions Advanced - Page 90
Off], [1second], [1minute], Ps/ph Audio
View all Panasonic AG-AC160A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Item Display mode Description of settings [INTERVAL REC] [TIME STAMP] Scenes changing slowly over a long period are recorded as short movies by (AVCHD providing a recording interval. One frame is recorded in each recording time mode only) period that has been set, and in the AVCHD mode 24 frames (PAL 25 frames) form a one-second video. [OFF], [1SECOND], [10SECONDS], [30SECONDS], [1MINUTE], [2MINUTES] When INTERVAL REC is enabled, set the recording format as follows. If the recording format is not set to the following, the [INTERVAL REC] item of the [RECORDING SETUP] screen is grayed out and cannot be enabled. When [SYSTEM FREQ] = [59.94Hz]: [PH 1080/24P] When [SYSTEM FREQ] = [50Hz]: [PH 1080/25P] ••When set to [PH 1080/24P], TC RECRUN is fixed to NDF. ••The maximum shooting time is 168 hours. ••Audio recording is disabled. Enables a function to superimpose [DATE]/[TIME] information over the shot images. [ON]: The information set in the [DATE]/[TIME] item is superimposed. [OFF]: Date and time information are not superimposed on the image. [PS/PH AUDIO MODE] Selects the format of audio recording when [REC FORMAT] = PS/PH. (AVCHD [LINEAR PCM]: Recording is performed in uncompressed LPCM. mode only) [Dolby Digital]: Recording is performed in Dolby Digital. ••The camera is fixed to Dolby Digital other than PS/PH mode. ••Content recorded with [LINEAR PCM] cannot be played back on our previous model. [AUDIO LIMITER CH1] Enables the limiter function on CH1 audio input. [ON]: Level is reduced only when input exceeds limit (adjustable using knob). [OFF]: No limiter (adjustable using knob) [AUDIO LIMITER CH2] Enables the limiter function on CH2 audio input. [ON]: Level is reduced only when input exceeds limit (adjustable using knob). [OFF]: No limiter (adjustable using knob) [MIC GAIN1] Sets the input level of the external microphone connected to the AUDIO INPUT1 terminal. [-40dB], [-50dB], [-60dB] [MIC GAIN2] Sets the input level of the external microphone connected to the AUDIO INPUT2 terminal. [-40dB], [-50dB], [-60dB] is the factory default mode. 90