Panasonic AG-AC160A Operating Instructions Advanced - Page 91
[TC/UB SETUP] screen, EXT TC LINK]
View all Panasonic AG-AC160A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
[TC/UB SETUP] screen Item Display mode Description of settings [TC MODE] Selects the correction mode of the internal time code when the time code of the internal time code generator is recorded. [DF]: Uses the drop frame mode. [NDF]: Uses the non-drop frame mode. ••Automatically set to [NDF] when you set the recording frame rate of the recording format to 24P. ••Enabled only when [SYSTEM FREQ] = [59.94Hz]. [TCG] Sets the mode in which you advance the internal time code generator. [FREE RUN]: The time code is advanced regardless of the operation mode. A slight time error may occur when switching to mode if the frame rate is set to 24P. [REC RUN]: The time code is advanced when shooting. [TC PRESET] Sets the initial time code. When you set the frame rate of the recording format to 24P, set the frame value to 0 or a multiple of 4 in AVCHD mode and to 5 frame units in DV mode. If any other value is set, the recorded time code will mismatch. [YES] [NO] [UB MODE] Sets the content to be recorded as the user information. (DV mode [USER]: Records the user information. only) [TIME]: The time is recorded. [DATE]: The date and time are recorded. [TCG]: Records the value of the time code generator. [FRAME RATE]: Records the frame rate information of frame conversion. [UB PRESET] Sets the user information. [YES] [NO] [EXT TC LINK] Synchronizes the initial time code value during multi-camera shooting. ([SLAVE] camera time codes are synchronized to the [MASTER] internal [TCG] value.) [MASTER]: Sets the mode to master mode. [SLAVE]: Sets the mode to slave mode. When the button is pressed, input time codes are synchronized to the internal [TCG]. [NO]: Returns to the previous screen. ••[MASTER] and [SLAVE] mode settings are in effect only when this menu is open. When the menu is closed, [EXT TC LINK] is automatically canceled. is the factory default mode. Menu 91