Panasonic AJPD900W AJPD900W User Guide

Panasonic AJPD900W Manual

Get Panasonic AJPD900W PDF manuals and user guides View all Panasonic AJPD900W manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AJPD900W manual content summary:

  • Panasonic AJPD900W | AJPD900W User Guide - Page 1
    Digital Camera/VTR AJ- P Operating Instructions
  • Panasonic AJPD900W | AJPD900W User Guide - Page 2
    important operating and maintenance (service) instructions in the literature accompanying instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a Class A digital in accordance with the instruction manual, may cause harmful
  • Panasonic AJPD900W | AJPD900W User Guide - Page 3
    . . . . . 22 Power Supply ¡Using an Anton Bauer Battery Pack 23 ¡Using the Panasonic AU-BP402 Battery Pack 24 ¡Using a Sony Battery Pack 26 ¡Using the Sony BP-90 Battery Pack the Marker Displays 58 ¡Setting the Camera ID 59 Bold letters should be set or adjusted immediately after purchase.
  • Panasonic AJPD900W | AJPD900W User Guide - Page 4
    87 ¡Preventing Accidental Erasure 88 Recording ¡Basic Procedures 89 ¡Characteristic Phenomenon of CCD Cameras 128 Inspections Before Shooting ¡Inspection Preparations 129 ¡Inspecting the Camera Section 129 ¡Inspecting the Viewfinder 130 ¡Inspecting the Iris and Zoom Functions 131 ¡Inspecting
  • Panasonic AJPD900W | AJPD900W User Guide - Page 5
    such as high picture quality and sensitivity, mobility, dustproofing and dampproofing, etc. In addition, both the camera section and the VTR employ a digital signal processing system which further improves picture quality and realizes a system for controlling setting menu and subject data by using
  • Panasonic AJPD900W | AJPD900W User Guide - Page 6
    In addition, when using an Anton Bauer Digital Magnum series battery as the unit's power displaying the VTR section status The unit informs of VTR trouble, the end of the tape, battery wear, etc /SNG color bar and reference audio signals The camera section contains a circuit which generates an SMPTE
  • Panasonic AJPD900W | AJPD900W User Guide - Page 7
    be performed by the external VTR instead of the internal VTR. Remote control Connecting the Extension Control Unit (option, AQ-EC1) allows a portion of the camera section functions to be operated by remote control. -7-
  • Panasonic AJPD900W | AJPD900W User Guide - Page 8
    Features Features of the VTR section Digital system The VTR section features a component digital recording system that employs the latest compression technology and non-compressed PCM recording for audio. This system provides superior S/N, frequency band and waveform characteristics as
  • Panasonic AJPD900W | AJPD900W User Guide - Page 9
    AJ-QVF900 5w EVF AJ-VF53 5w EVF mount adaptor AJ-YA711 Camera/VTR AJ-PD900W 26P/12P output adaptor AJ-YA900P Battery case SHAN-B220 holder VTR cable VTR Multi connector cable SHAN-C12TCA Panasonic Battery AU-BP220 Sony Battery NP-1 Panasonic Battery AU-BP402 Anton Bauer Battery Sony Battery
  • Panasonic AJPD900W | AJPD900W User Guide - Page 10
    inside. Upon completion of the internal inspection and adjustments, push this button back in. The power will come back on provided that there is no trouble inside the unit. h POWER switch ON: Set to this position to turn on the unit's power. OFF: Set to this position to turn off the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 11
    6 5 5 7 9 8 n q p o Accessory Mounting Section i Hook for mounting shoulder belt Attach the accessory shoulder belt to this hook. j Light shoe Mount the video light, etc. onto this shoe. k Lens mount (bayonet type) Mount the lens here. l Lens clamping lever Insert the lens into the lens mount
  • Panasonic AJPD900W | AJPD900W User Guide - Page 12
    CH1 level can also be adjusted using the AUDIO LEVEL CH1 control r on the front panel. u AUDIO SELECT CH1/CH2 switch (audio channel 1/2 auto/manual level adjustment selector) switch This selects the method used to adjust the audio levels of audio channels 1 and 2. AUTO: For adjusting the levels
  • Panasonic AJPD900W | AJPD900W User Guide - Page 13
    with the MONITOR SELECT switch ü. ST: The stereo sound of audio channels 1 and 2 is output. MIX: The mixed sound of audio channels 1 and 2 is output. ° PHONES (earphone) jack (mini-jack) When an earphone (option) is connected to this jack, the sound selected by the MONITOR switch † can be heard. The
  • Panasonic AJPD900W | AJPD900W User Guide - Page 14
    is adjusted in such a way that the images on the viewfinder screen are seen most clearly in accordance with the dioptric power of the camera's operator. ® Eye cup © Viewfinder forward-backward/left-right position clamp lever Loosen this lever to adjust the position of the viewfinder ¢ in the forward
  • Panasonic AJPD900W | AJPD900W User Guide - Page 15
    ´ ® ™ ߨ ≠ Æ Shooting (Recording)/Playback Function Section (2) ¨ CC/ND FILTER (filter selector) knob This selects the filter to match the light source which is illuminating the subject. If the setting of this knob is changed when the menu display mode has been set to "3" (default setting), the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 16
    adjusting the video monitor ¡When recording color bar signals The images shot by the camera are output. The AUTO KNEE circuit is not activated. The default setting is "MANUAL KNEE". The images shot by the camera are output. The AUTO KNEE circuit is activated. ∞ GAIN (gain selector) switch This is
  • Panasonic AJPD900W | AJPD900W User Guide - Page 17
    appearing on the monitor screen so that the settings can also be checked (in which case, the images appear in black and white). ∂ CAM OUT (camera output) connector (BNC) This outputs the composite video signals (75∞ termination, rated level). When a video monitor is connected, the images shot by the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 18
    when the VTR START button is pressed. π MODE CHECK button While this button is kept depressed, the camera's setting status is displayed in the viewfinder. It does not affect the camera's output signals. ∫ SUPER GAIN button (inside sliding cover) Press this button to forcibly establish the super gain
  • Panasonic AJPD900W | AJPD900W User Guide - Page 19
    ø¿ º æ Ω ¡ º EJECT (cassette eject) button Press this to insert or eject the cassette. Ω REW (rewind) button Press this to rewind the tape. Its lamp lights during rewinding. If this button is pressed during playback, the playback images are rewound at approximately quadruple speed while the button
  • Panasonic AJPD900W | AJPD900W User Guide - Page 20
    used to select the setting menu page. Time Code-Related Section (1) » GENLOCK IN connector (BNC) The reference signal is supplied to this connector when the camera section is to be subject to genlock operation or when the time code is to be locked externally. - 20 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 21
    displayed. Œ UP button, DOWN button When setting the time code or user's bit, these buttons increment or decrement by 1 the figure of the digit made to flash by the SHIFT/ITEM button œ. œ SHIFT/ITEM (digit advance) button When setting the time code or user's bit, this button is used to cause the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 22
    tally lamp ". ON: The back tally lamp operates. OFF: The back tally lamp does not operate. ' WARNING lamp This flashes or lights when trouble occurs in the VTR section. ÷ LIGHT switch ON: This illuminates the display window ◊. OFF: This extinguishes the display window illumination. ◊ Display window
  • Panasonic AJPD900W | AJPD900W User Guide - Page 23
    Panasonic, B Anton Bauer or C Sony batteries can be used for the battery pack. Before using a battery pack, be sure to charge it completely using a battery charger. ¡See the Handling Instructions arrow. Lever Pack |Note{ The AJ-PD900W supports the intelligent battery system and the ultra-light system
  • Panasonic AJPD900W | AJPD900W User Guide - Page 24
    Power Supply Using the Panasonic AU-BP402 Battery Pack 1 Detach the battery mounts. 2 Connect the unit's connectors with the connectors of the AU-M402H battery case. 3 Mount the AU-M402H
  • Panasonic AJPD900W | AJPD900W User Guide - Page 25
    4 Connect the battery pack plug to the connector inside the case and insert the battery pack. |Note{ The unit's power must be set to OFF before the plug is inserted or removed. - 25 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 26
    Power Supply Using a Sony Battery Pack 1 Remove the battery mounts. See page 24. 2 Mount the accessory battery mounting connector. 3 Mount the Sony battery holder. Mount the battery case with the cover detached first, and then mount the detached cover as shown in the figure. A Tighten the mounting
  • Panasonic AJPD900W | AJPD900W User Guide - Page 27
    Using the Sony BP-90 Battery Pack 1 Mount the accessory battery mounting connector. (See the preceding page.) 2 Mount the BP-90 battery case. A Tighten the mounting screws. B Tichten the power supply contact screws. C Insert the top of the detached cover in the direction of the arrow. D Align the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 28
    Power Supply Using an AC Power Supply (When using the AJ-B75 AC Adaptor) 1 Connect the unit's EXT DC IN socket with the DC OUT connector of the AJ-B75 AC adaptor. DC IN Connector 2 Set the AC adaptor's power to ON. 3 Set the unit's power switch to ON. |Notes{ ¡When using an external power supply
  • Panasonic AJPD900W | AJPD900W User Guide - Page 29
    Press the cable into the cable clamp and connect it to the LENS connector. LENS Connector ¡See the Handling Instructions provided with the lens for lens handling. |Note{ The lens and camera adjustments listed below may be necessary depending on the lens to be mounted. 1. Lens flange back adjustment
  • Panasonic AJPD900W | AJPD900W User Guide - Page 30
    each part of the lens which must be operated in order to adjust the flange back with the lens Handling Instructions. Approx. 3 m Adjusting the Flange Back 1 Set the lens iris to manual. 2 Open the iris. Position the flange back adjustment chart about 3 m from the lens and illumi- nate it so that an
  • Panasonic AJPD900W | AJPD900W User Guide - Page 31
    to be re-adjusted. White shading adjustment procedure 1 Mount a lens to the camera. Be sure to also connect the lens cable. 2 Set the electronic shutter to such as sunlight or halogen lamps, etc. 6 Set the lens iris to manual and adjust the iris so that the ZEBRA pattern covers the entire screen. If
  • Panasonic AJPD900W | AJPD900W User Guide - Page 32
    7 Set the WHITE BAL selector switch to A or B execute AWB. Next, execute ABB and then execute AWB again. WHITE BAL: A or B 8 Repeat step 6. 9 Set the MENU switch from OFF to SET while holding down the SHIFT/ITEM and UP but- tons to open the menu. Press the PAGE button until the AUTO SHADING page
  • Panasonic AJPD900W | AJPD900W User Guide - Page 33
    Adjusting the Viewfinder Adjusting the Position 1 Lift up the viewfinder forward-backward/left/right position clamp lever to release the lock. Viewfinder Lever 2 Adjust the position of the viewfinder in the forward-backward and left-right directions. 3 Tighten the viewfinder forward-backward/left-
  • Panasonic AJPD900W | AJPD900W User Guide - Page 34
    -3 -2 -1 0 +1 +2 +3 Adjusting the Viewfinder Adjusting the Diopter and Screen Adjusting the diopter 1 Set the POWER switch to ON. A picture will appear in the viewfinder. 2 Turn the diopter adjustment ring to adjust the diopter so that the viewfinder picture can be clearly seen. Diopter
  • Panasonic AJPD900W | AJPD900W User Guide - Page 35
    Detaching the Eyecup Detaching the eyecup allows the entire screen to be seen clearly even when shooting with your eye removed from the viewfinder. This also facilitates the removal of dust which has adhered to the CRT screen and mirror. |Note{ Absolutely do not wipe the mirror surface as it has
  • Panasonic AJPD900W | AJPD900W User Guide - Page 36
    Adjusting the Viewfinder Detaching the Viewfinder 1 Check that the POWER switch is set to OFF. 2 Disconnect the plug from the viewfinder cable connector. |Note{ Use both hands to detach the viewfinder. The viewfinder may not detach smoothly with one hand, resulting in damage to the viewfinder. 3
  • Panasonic AJPD900W | AJPD900W User Guide - Page 37
    microphone kit (option) or the AJ-MH700P microphone holder (option) allows a microphone to be mounted to the main unit. ¡See the Handling Instructions for the microphone holder. Using the AJ-MC700P Microphone Kit (Option) Microphone Mounted to the Main Unit 1 Mount the microphone holder. Viewfinder
  • Panasonic AJPD900W | AJPD900W User Guide - Page 38
    Audio Input Preparations Mounting the AJ-MH700P Microphone Holder (Option) 1 Remove the microphone holder mounting screws. 2 Mount the AJ-MH700P microphone adaptor (option) to the main unit. Mount the microphone adaptor using the accessory screws. 3 Mount the microphone to the microphone holder and
  • Panasonic AJPD900W | AJPD900W User Guide - Page 39
    Using the Microphone not Mounted to the Main Unit To the MIC IN Connector AUDIO IN switch: Set the AUDIO IN switch for the audio channel you wish to |Note{ record to FRONT [MIC]. When extending the microphone, use a cable which supports the phantom power supply type of microphone. - 39 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 40
    to the Main Unit Up to two external microphones can be connected to the AUDIO IN CH1/CH2 Connectors. Phantom power supply can also be supported by setting the MIC POWER switch to the ON position. AUDIO IN Switch: Set the AUDIO IN Switches of the channels to which microphones are
  • Panasonic AJPD900W | AJPD900W User Guide - Page 41
    Panasonic wireless microphone system, mount the WX-RA700 wireless re- ceiver. To the AUDIO OUT Connector WX-RA700 Wireless Receiver WX-R980 Camera camera attachment (1) and detach the microphone in the upward direction (2). Lever XLR Cable AJ-PD900W Main Unit ¡See the Handling Instructions
  • Panasonic AJPD900W | AJPD900W User Guide - Page 42
    in the direction of the arrow. Red Lever Black Lever |Note{ When the tripod attachment pin does not return to its original position after the camera has been detached, hold down the red lever and move the black lever in the direction of the arrow again to return the pin to
  • Panasonic AJPD900W | AJPD900W User Guide - Page 43
    Mounting the Shoulder Belt Shoulder Belt Press to open the hook. To remove the shoulder belt, open the hooks and then remove the belt. Press |Note{ When mounting and removing the shoulder belt, press on the top of the hooks to check that the belt is securely mounted. - 43 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 44
    Adjusting the Shoulder Pad Position The shoulder pad can be slid up to 2/5Ω in the forward-backward direction from the center position (the position when shipped from the factory). Adjust the shoulder pad position to facilitate operation of the unit. 1 Loosen the two screws. 2 Slide the pad in the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 45
    Attaching the Rain Cover Attach the rain cover as shown in the figure below. Tighten the Cord. Secure the surface fastener. Secure the surface fastener. When mounting the unit to the tripod attachment, mount the unit using this hole. - 45 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 46
    and AQ-EC1 are set to ON, the unit automatically enters remote control mode. The handling instructions included with the AQ-EC1 describe operations for when the AQ-EC1 is connected to an AQ series digital camera. When the AQ-EC1 is connected to the AJ-PD900W, some functions differ, and some features
  • Panasonic AJPD900W | AJPD900W User Guide - Page 47
    page. The setting menu configuration can be changed according to the purpose. Setting Menu Configuration Page No. 58 Page name MARKER 56 VF DISPLAY 59 CAMERA ID 72 SHUTTER SPEED 73 SYNCHRO SCAN 52 ! LED 81 SET UP CARD 107 MAIN FUNCTION 107 BATT/TAPE ALARM 108-110 FUNCTION 1/5 to 5/5 62
  • Panasonic AJPD900W | AJPD900W User Guide - Page 48
    Warning/Status Displays in the Viewfinder and Display Window Changing the setting menu configuration The setting menu can be configured by selecting only the pages necessary for the application. Pages are selected using the MENU SELECT page of the engineer menu mode. When using the engineer menu,
  • Panasonic AJPD900W | AJPD900W User Guide - Page 49
    MODE : 3 EXTENDER : ON SHUT TER : ON TAPE : ON BA T T ERY : ON F I L TER : ON WH I TE : ON GA I N : ON LEVEL METER : CH1 IRIS : S+ I R I S CAMERA I D : OFF The page can also be changed using the UP and DOWN buttons as follows. ¡PAGEµUP: The menu page is incremented continuously
  • Panasonic AJPD900W | AJPD900W User Guide - Page 50
    Warning/Status Displays in the Viewfinder and Display Window Selecting the desired item 1 Press the SHIFT/ITEM switch. Each time this button is pressed, the cursor (arrow) which indicates the selected item moves to the next item. Cursor Movement order - MARKER - ¢CENTER MARK : ON † SAFETY ZONE :
  • Panasonic AJPD900W | AJPD900W User Guide - Page 51
    Lamp Displays Inside the Viewfinder The viewfinder displays are as follows. 5 1 6 P REC 50 ! BATT VTR SAVE 3 2 4 1. REC (recording) lamp This lamp lights (red) during recording, and flashes when warnings are issued. ¡See "Warning System" (page 125) for a detailed description. 2. BATT (
  • Panasonic AJPD900W | AJPD900W User Guide - Page 52
    Lamp Displays Inside the Viewfinder Setting the ! Lamp Display Items subject to ! lamp display are selected at the ! LED page of the setting menu. (When shipped from the factory, the unit is set so that the ! LED page is not displayed.) To operate the ! LED page, switch the unit to engineer mode or
  • Panasonic AJPD900W | AJPD900W User Guide - Page 53
    Status Displays Inside the Viewfinder Screen In addition to images, messages indicating the unit's settings and operating status appear on the viewfinder screen. The center marker and safety zone marker, etc. are also displayed. When the MENU SET/OFF switch is set to OFF, items set to SET at the VF
  • Panasonic AJPD900W | AJPD900W User Guide - Page 54
    to PRST. 7 Gain value display This displays the image amplifier gain setting (dB) set by the GAIN switch. |Note{ When using an Anton Bauer Digital Magnum Series battery, the remaining battery level display continues to display the level for the Anton Bauer battery even if power supply is switched
  • Panasonic AJPD900W | AJPD900W User Guide - Page 55
    8 Audio level display This displays the audio CH1 level. During sine wave input, the audio level display corresponds roughly to the VTR level meter display as follows. Audio Channel 1 Level Display E VTR Level Meter -40 -30 -25 -20 -15 -10 -5 0 9 Iris value display This displays the approximate iris
  • Panasonic AJPD900W | AJPD900W User Guide - Page 56
    I SP MODE : 3 EXTENDER : ON SHUT TER : ON TAPE : ON BA T T ERY : ON F I L TER : ON WH I TE : ON GA I N : ON LEVEL METER : CH1 IRIS : S+ I R I S CAMERA I D : OFF 3 Press the SHIFT/ITEM button to move the cursor to the position of the desired item. 4 Press the UP and DOWN buttons to
  • Panasonic AJPD900W | AJPD900W User Guide - Page 57
    Display Mode and Setting Change Message Messages informing of the contents of changed settings and adjustment results can be limited to part of the displayed items or not displayed for all items. The conditions under which messages are displayed and the corresponding display modes are shown in the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 58
    Status Displays Inside the Viewfinder Screen Changing the Display Mode The display mode setting appears on the VF DISPLAY page of the setting menu. 1 Perform the operations in steps 1 to 3 of "Selecting Display Items" (page 56) to display the VF DISPLAY page of the setting menu on the viewfinder
  • Panasonic AJPD900W | AJPD900W User Guide - Page 59
    is being recorded. It is also displayed on the viewfinder screen. |Note{ When the setting menu is displayed, the camera ID is not displayed even if the color bar signal is output. 1 Set the MENU SET/OFF switch to SET the SMPTE color bars and the gray, this is not indicative of any trouble. - 59 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 60
    occurs. SERVO: Lights when the servo is out of order. HUMID: Lights when condensation occurs on the head drum. SLACK: Lights when tape wind-up trouble occurs. ¡See "Warning System" (page 125) for a detailed description. - 60 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 61
    Time Code-Related Displays DF SLAVE TCG HOLD WIDE EMPHASIS 0 h min s frm 10 E TAPE F 20 E BATT F RF SERVO HUMID SLACK 30 40 CH1 dB CH2 These lamps light to indicate the time code, CTL and real time displays. DF: This lamp lights during drop frame mode SLAVE: This lamp lights when
  • Panasonic AJPD900W | AJPD900W User Guide - Page 62
    Adjusting the Time and Date Adjustment and setup using the setting menu 1 Hold down the SHIFT/ITEM and UP buttons and set the MENU SET/OFF switch to SET. The unit switches to ENG mode. The page on which the previous setting menu operations were completed appears on the viewfinder screen. (When the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 63
    Adjustments and Setup During Recording Adjustments and Setup Using the Setting Menu Adjustments and setup operations during recording are performed at the setting menu. Setting menu operations are basically performed according to the procedures described on page 49. However, these procedures vary
  • Panasonic AJPD900W | AJPD900W User Guide - Page 64
    Adjustments and Setup During Recording Setting the Gain Selector Value When shooting in locations without sufficient brightness, bright images can be obtained by raising the gain. However, care should be taken as raising the gain also increases the noise. The gain value for the image amplifier is
  • Panasonic AJPD900W | AJPD900W User Guide - Page 65
    Selecting Functions VTR operation functions can be selected at the FUNCTION 3/5 page of the setting menu. Selecting the required functions 1 Set the MENU SET/OFF switch to SET. The page on which the previous setting menu operations were completed appears on the viewfinder screen. (When the menu is
  • Panasonic AJPD900W | AJPD900W User Guide - Page 66
    Adjusting the White Balance/Black Balance Adjusting the White Balance Adjusting the white balance and black balance in the order of AWB (white balance adjustment)>ABB (black balance adjustment)>AWB will provide a better picture. Normally, the white balance and black balance do not need to be
  • Panasonic AJPD900W | AJPD900W User Guide - Page 67
    , the iris may experience hunting1). In these cases, adjust the iris gain knob (the knob marked IG, IS, S, etc.) on the lens. ¡See the Handling Instructions for the lens for a detailed description. 1) Hunting: The auto iris responds repeatedly causing the image to become darker and brighter. - 67 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 68
    unstable (shooting is taking place under fluorescent lighting or the camera is not being held or pointed properly, etc.). Treatment Select illumination or gain. Decrease the illumination or gain. If flickering is a problem, turn the SHUTTER switch to ON and stabilize the shooting conditions. If
  • Panasonic AJPD900W | AJPD900W User Guide - Page 69
    The black balance must be adjusted in the following cases. ¡When the unit is used for the first time ¡When the unit is first used after an extended period of non-use ¡When the unit is used under conditions where the ambient temperature has changed by a wide margin ¡When the gain selector value is
  • Panasonic AJPD900W | AJPD900W User Guide - Page 70
    Adjusting the White Balance/Black Balance 4 Adjustment is completed after a few seconds (the following message appears) and the ad- justment value is automatically stored in the memory. ABB OK Message after adjustment is completed |Notes{ ¡Check that the lens connector is connected and that the iris
  • Panasonic AJPD900W | AJPD900W User Guide - Page 71
    reduce horizontal stripe patterns for monitor screens with a vertical scanning frequency of 60 Hz or more. |Notes{ ¡Increasing the shutter speed lowers the camera sensitivity regardless of electronic shutter mode. ¡If the iris is set to AUTO, the iris opens and the depth of the focuses decreases as
  • Panasonic AJPD900W | AJPD900W User Guide - Page 72
    Setting the Electronic Shutter Setting the Shutter Mode/Speed ¡The shutter speed during shutter mode and standard mode is set by the SHUTTER switch. ¡During SYNCHRO SCAN mode, the shutter speed can be set beforehand at the SYNCHRO SCAN page of the setting menu. In the SYNCHRO SCAN mode, the shutter
  • Panasonic AJPD900W | AJPD900W User Guide - Page 73
    be subject to changes (flickering) for a moment when the frequency is switched in the synchro scan mode. This is normal and not an indication of trouble. - 73 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 74
    Setting the Electronic Shutter Changing the Shutter Speed/Mode Selection Range The shutter speed selection range can be limited to the required range and whether to use a SYNCHRO SCAN mode can be selected at the SHUTTER SPEED page of the setting menu. The unit is set so that the SHUTTER SPEED page
  • Panasonic AJPD900W | AJPD900W User Guide - Page 75
    to adjust the audio level so that the level meter appears up to 0 dB at the maximum volume. Limiter When the audio level is adjusted manually, the limiter circuit operates with respect to excessive input. Limiter circuit operation can be set to ON and OFF at the setting menu. (The factory
  • Panasonic AJPD900W | AJPD900W User Guide - Page 76
    Adjusting the Audio Level 4 Turn the AUDIO LEVEL CH1 control at the bottom of the front panel to adjust the input vol- ume so that the audio level display appears as shown below. ¡When the input volume is normal, the audio level display turns ON up to the seventh of the eight level display bars from
  • Panasonic AJPD900W | AJPD900W User Guide - Page 77
    is to be set to flash. Each time it is pressed, the flashing digit moves to the right. UP button: This increments by 1 the figure of the flashing digit. DOWN button: This decrements by 1 the figure of the flashing digit. 5 Set the TCG switch. Set the switch to F-RUN when the time code
  • Panasonic AJPD900W | AJPD900W User Guide - Page 78
    the user bit using the SHIFT/ITEM, UP and DOWN buttons. SHIFT/ITEM button: This is used to cause the digit which is to be set to flash. Each time it is pressed, the flashing digit moves to the right. UP/DOWN buttons: These increment/decrement by 1 the figure of the flashing
  • Panasonic AJPD900W | AJPD900W User Guide - Page 79
    Locking the Time Code to an External Source The time code generator of the VTR section can be locked to an external generator. Example of connections for external locking Example 1: Locking the time code to an external signal TC OUT Reference time code GENLOCK IN Reference video signal TC IN
  • Panasonic AJPD900W | AJPD900W User Guide - Page 80
    before unplugging the battery pack. If the battery pack is unplugged first, the external locking continuity of the time code cannot be assured. Synchronizing the camera section to an outside source during external locking While the time code is locked to an external source, the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 81
    be used to quickly recreate the appropriate setup conditions. Subject data, etc. can also be stored on setup cards. See the Setup Card Application Instructions for a detailed description. ¡Optional cards include the general purpose memory card (SRAM 64 KB or more) which is used as the setup card
  • Panasonic AJPD900W | AJPD900W User Guide - Page 82
    Setup Card Operations Setup Card Data Operations Operations to store setting data on setup cards and read out stored data are performed at the SET UP CARD page of the setting menu. |Note{ When operating the unit with a remote controller, the SET UP CARD page cannot be operated from the unit.
  • Panasonic AJPD900W | AJPD900W User Guide - Page 83
    When data is not written If the following error messages appear when the UP button is pressed in step 5, the data is not written. Data format error messages Error message WRITE PROTECT NO CARD ERROR Condition The write protect switch on the side of the card is set to ON. A setup card is not
  • Panasonic AJPD900W | AJPD900W User Guide - Page 84
    Setup Card Operations Writing set data to cards 1 Set the MENU SET/OFF switch to SET. The page on which the previous setting menu oper- ations were completed appears on the viewfinder screen. (When the menu is used for the first time, the first page appears.) 2 Press the MENU switch repeatedly until
  • Panasonic AJPD900W | AJPD900W User Guide - Page 85
    Protecting stored data If the setup card's WRITE PROTECT switch is set to ON, data is not rewritten even if the UP button is pressed in step 5. Set to ON. When data is not written If the following error messages appear when the UP button is pressed in step 5, the data is not written. Data writing
  • Panasonic AJPD900W | AJPD900W User Guide - Page 86
    Setup Card Operations Reading out data stored on cards 1 Set the MENU SET/OFF switch to SET. The page on which the previous setting menu oper- ations were completed appears on the viewfinder screen. (When the menu is used for the first time, the first page appears.) 2 Press the PAGE switch
  • Panasonic AJPD900W | AJPD900W User Guide - Page 87
    Cassettes ¡See "Cassettes" (page 135) for a description of cassettes which can be used with the unit. Inserting and Ejecting Cassettes Inserting cassettes 1 Check that there are no cables, etc. around the cassette holder and the top panel and then set the POWER switch to ON. Power: ON If
  • Panasonic AJPD900W | AJPD900W User Guide - Page 88
    Cassettes Ejecting cassettes With the power turned on, press the EJECT button to open the cassette holder and eject the cassette. If a cassette is not to be inserted immediately after ejecting the cassette, close the cassette holder. Ejecting cassettes when the battery has run out Set the POWER
  • Panasonic AJPD900W | AJPD900W User Guide - Page 89
    Recording Basic Procedures This section describes the basic operating procedures for shooting and recording. When starting to shoot actual images, inspect the unit beforehand to check that all systems are functioning normally. ¡See the "Inspections Before Shooting" (page 129) for a description of
  • Panasonic AJPD900W | AJPD900W User Guide - Page 90
    Recording Procedures from adjusting the white balance and black balance to stopping recording Turn on the power, insert a cassette, and then set the various switches as follows. Iris: AUTO AUDIO SELECT CH1/CH2: AUTO TCG: F-RUN or R-RUN OUTPUT: CAM/AUTO KNEE ON GAIN: Normally, set to 0 dB. When it
  • Panasonic AJPD900W | AJPD900W User Guide - Page 91
    . For details on how to adjust the white balance, read through the section entitled "Adjusting the white balance/black balance" (page 66). 2 Aim the camera at the subject and adjust the focus and zoom. 3 When using the electronic shutter, set the shutter speed and operation mode. ¡See "Setting the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 92
    Recording Successive Shooting Successive shooting with an accuracy of within 0 - o1 frame can be performed simply by pressing the VTR START button of the unit or the VTR button of the lens while recording is paused. While recording is paused The unit automatically searches for the successive
  • Panasonic AJPD900W | AJPD900W User Guide - Page 93
    Successive Shooting in Other Cases If successive shooting is to be performed after the tape has been run, the cassette has been ejected, or when using a tape which has only been recorded part-way, follow the procedures outlined below. 1,2 4 3 Performing successive shooting after the tape has been
  • Panasonic AJPD900W | AJPD900W User Guide - Page 94
    Playback-Checking Recorded Contents Rec Review Color Playback Pressing the PLAY button allows black-and-white playback images to be viewed on the viewfinder. Playback images can also be viewed in two other ways. ¡Rec review: When the RET switch has been set to REC CHECK by MAIN FUNCTION on the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 95
    , these lamps indicate the REC status of the external VTR. Warning tone External VTR-related warning tones are not output from the unit's speaker or PHONES jack. Note on connecting cables The signals may not be connected properly with some cables. The signal assignments for the 26-pin/12-pin output
  • Panasonic AJPD900W | AJPD900W User Guide - Page 96
    Recording Simultaneously with the Internal VTR and an External VTR Connections Mount the AJ-YA900P 26-pin/12-pin output adaptor (option) to the unit, connect the external VTR with the 26-pin cable, and set the audio input level selector switch of the external VTR to "p60 dB". SW201 on the CAM ENC
  • Panasonic AJPD900W | AJPD900W User Guide - Page 97
    Functions of the Unit's VTR SAVE/STBY Switch Tape running mode Pressing the unit's STOP, REW or FF buttons sets the internal VTR to stop, rewind or fast forward modes, respectively. However, the external VTR is set to recording paused status in all cases. Viewing playback images on the viewfinder
  • Panasonic AJPD900W | AJPD900W User Guide - Page 98
    the adaptor. 1 Set the unit's internal switches. 1 Remove the side panel on the display window side. 2 Remove the Printed Circuit Board holder and remove the CAMERA ENC (4) Printed Cir- cuit Board. 3 Set SW201 to the ON side. 4 To set the audio level to p20 dB, set the SW4701 DIP switch accordingly
  • Panasonic AJPD900W | AJPD900W User Guide - Page 99
    " (page 65) for a description of FUNCTION 3/5 page operations. Switching from the internal VTR to the external VTR If the internal VTR experiences problems (tapes becoming tangled, condensation, etc.) during operation and becomes unable to operate, the VTR START button of the unit and the VTR button
  • Panasonic AJPD900W | AJPD900W User Guide - Page 100
    Recording paused Playing Playback paused Recording Recording paused Playing Playback paused Description of what appears on viewfinder screen Images shot by camera. RET button does not function. What has been recorded (2-second rec review) can be checked. Internal VTR's playback images. RET button
  • Panasonic AJPD900W | AJPD900W User Guide - Page 101
    Replacing the Backup Battery The unit is shipped from the factory with a backup battery already mounted. When the battery runs out, the TCG time code value indicates 00:00:00:00. At this time, the time code value cannot be backed up. In addition, the "BACK UP BATT EMPTY" display appears in the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 102
    Setting Menu Screens MARKER Screen This page sets the setting for the marker displays inside the viewfinder. - MARKER - ¢CENTER MARK : ON SAFETY ZONE : 1 Item CENTER MARK SAFETY ZONE Variable VF range display ON OFF USER ENG OFF 1-6 USER ENG Remarks Center mark display ON/OFF Safety zone
  • Panasonic AJPD900W | AJPD900W User Guide - Page 103
    I TE : ON GA I N : ON LEVEL METER : CH1 IRIS : S+ I R I S CAMERA I D : OFF Menu screen display methods USER menu: Setting the MENU switch to SET displays the USER qøø EXTENDER SHUTTER TAPE BATTERY FILTER WHITE GAIN LEVEL METER IRIS CAMERA ID ON OFF USER ENG ON OFF USER ENG ON OFF
  • Panasonic AJPD900W | AJPD900W User Guide - Page 104
    to 9) and symbols [space x, /, !]. Pressing the DOWN button changes the character display in the reverse order. - CAMERA I D - † ID: EEEEEEEEE Item ID: EEEEEEEEE Variable VF range display -- USER ENG Remarks Camera ID input |Note{ Whether or not this set value is to be mixed is selected by
  • Panasonic AJPD900W | AJPD900W User Guide - Page 105
    SYNCHRO SCAN Screen This page performs the synchro scan settings. - SYNCHRO SCAN 1 / 63 . 2 Item SYNCHRO SCAN Variable range 1/63.2 1/201.9 VF display USER ENG Remarks Synchro shutter speed selection ! LED Screen This page sets the ON/OFF setting for the ! LED display inside the viewfinder.
  • Panasonic AJPD900W | AJPD900W User Guide - Page 106
    or written on the set-up card. ON: Read/write is enabled. OFF: Read/write is disabled. FFor example, so as not to change the CAMERA ID when reading from, or writing to the SET UP CARD, the ID READ/WRITE should be selected to OFF. The underlined setting in the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 107
    MAIN FUNCTION Screen This page performs the adjustment function settings. - MA I N FUNCT I ON - ¢REC PB RET MODE MODE SW : 16 9 /P E : AUTO : REC CHECK Item REC.MODE PB MODE RET SW Variable VF range display 16E9/P 4E3/P 16E9/50I 4E3/50I 16E9/25I 4E3/25I ENG AUTO P 50I 25I ENG REC CHECK
  • Panasonic AJPD900W | AJPD900W User Guide - Page 108
    Setting Menu Screens FUNCTION 1/5 Screen This page performs the adjustment function 1 settings. The ON/OFF status for each item is indicated by displaying an asterix (E) or period (.) in front of the item on the screen. - FUNCT I ON 1 / 5 - ¢ EDETA I L . 2D LPF EMATR I X E SUPER CO L OR E GAMMA .
  • Panasonic AJPD900W | AJPD900W User Guide - Page 109
    of an intelligent battery, a numerical indication (percentage) of power available is displayed in the viewfinder. If the camera is usually used with an intelligent battery, BATTERY SEL should be set to DIGITAL. Item HUMID OPE 26P CONTROL REC START TC MODE UB MODE PAUSE TIMER BATTERY SEL TCG VF DISP
  • Panasonic AJPD900W | AJPD900W User Guide - Page 110
    ENG ENG Remarks ON: The phantom power is supplied to the front microphone. OFF: The phantom power is not supplied to the front microphone. Camera microphone input level selection REAR MIC CH1 p40/ p50/ p60 dB ENG Rear jack AUDIO CH1 input microphone level selection REAR MIC CH2 p40/ p50
  • Panasonic AJPD900W | AJPD900W User Guide - Page 111
    FUNCTION 5/5 Screen This page performs the adjustment function 5 settings. - FUNCT I ON 5 / 5 - ¢ V I DEO OUT : MENU ON Item VIDEO OUT Variable range MENU ON MENU OFF VF display ENG Remarks This is for selecting whether characters are to be displayed for the VIDEO OUT signals. MENU ON:
  • Panasonic AJPD900W | AJPD900W User Guide - Page 112
    B L ACK STRETCH : OF F MATR I X TABLE : A (What appears inside the parentheses at the top right indicates the camera mode.) This menu enables the 4 modes (16E9/P, 4E3/P, 16E9/I and 4E3/I) of the camera to be set separately. (However, the MASTER GAIN and MASTER GAMMA settings are common to all the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 113
    B L ACK STRETCH : OF F MATR I X TABLE : A (What appears inside the parentheses at the top right indicates the camera mode.) This menu enables the 4 modes (16E9/P, 4E3/P, 16E9/I and 4E3/I) of the camera to be set separately. (However, the MASTER GAIN and MASTER GAMMA settings are common to all the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 114
    B L ACK STRETCH : OF F MATR I X TABLE : A (What appears inside the parentheses at the top right indicates the camera mode.) This menu enables the 4 modes (16E9/P, 4E3/P, 16E9/I and 4E3/I) of the camera to be set separately. (However, the MASTER GAIN and MASTER GAMMA settings are common to all the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 115
    ON/OFF switching for mode which narrows detail ON/OFF switching for mode which increases edge resolution LEVEL 2/6 Screen This page performs the camera setup level 2 settings. - LEVEL 2 / 6 - ¢SK I N SK I N SK I N SK I N SK I N SK I N TONE TONE TONE TONE TONE TONE DT L : OFF HUE : 103 LEVEL
  • Panasonic AJPD900W | AJPD900W User Guide - Page 116
    Screens LEVEL 3/6 Screen This page performs the camera setup level 3 settings. - LEVEL 3 / 6 - ¢M . PED SET UP MANUA L KNEE KNEE PO I NT KNEE SLOPE WH I TE CL I P WH I TE CL I P L V L : +000 : 7 . 5%A : ON : 197 : 18 : ON : 110% Item M.PED SET UP MANUAL KNEE KNEE POINT KNEE SLOPE WHITE CLIP
  • Panasonic AJPD900W | AJPD900W User Guide - Page 117
    B GAMMA Variable VF range display Remarks 00... ENG Rch flare setting The preset value differs according to 100 the camera. 00... ENG Gch flare setting The preset value differs according to 100 the camera. 00... ENG Bch flare setting The preset value differs according to 100 the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 118
    Setting Menu Screens LEVEL 5/6 Screen This page performs the camera setup level 5 settings. - LEVEL 5 / 6 - ¢MATR I X TABLE MATR I X R-G MATR I X R-B MATR I X G-R MATR I X G-B MATR I X B-R MATR I X B-G :A : +00 : +00 : +00 : +00 : +00 : +00 Item MATRIX TABLE MATRIX R-G MATRIX R-B MATRIX G-R
  • Panasonic AJPD900W | AJPD900W User Guide - Page 119
    LEVEL 6/6 Screen This page performs the camera setup level 6 settings. - LEVEL 6 / 6 - ¢H PHASE COARSE : 0 7 H PHASE F I NE : 128 SC PHASE COARSE : 0 SC PHASE F I NE : 1 2 8 A . I R I S LEVEL : 072 A . I R I S PEAK / AVE : 0 6 3 A . I R I S MODE : NORM1 S . I R I S LEVEL : 075 Item H
  • Panasonic AJPD900W | AJPD900W User Guide - Page 120
    Setting Menu Screens VF OPERATION Screen This page performs the viewfinder display settings. - VF OPERAT I ON - ¢ VF OUT VF DTL Z EBRA 1 Z EBRA 2 Z EBRA 2 :Y :2 DETECT : 0 7 0 DETECT : 0 8 5 : SPOT Item VF OUT VF DTL ZEBRA1 DETECT ZEBRA2 DETECT ZEBRA2 Variable range Y NAM R G B 0 . . . 2. .
  • Panasonic AJPD900W | AJPD900W User Guide - Page 121
    EMARKER EVF D I SPLAY ECAMERA I D . SHUT TER SPEED E SYNCHRO SCAN . ! LED E SET UP CARD . MA I N FUNCT I ON . BAT T / TAPE A L ARM E: ON . : OFF Item MARKER VF DISPLAY CAMERA ID SHUTTER SPEED SYNCHRO SCAN !LED SET UP CARD MAIN FUNCTION BATT/TAPE ALARM Variable range ON OFF ON OFF ON OFF ON OFF ON
  • Panasonic AJPD900W | AJPD900W User Guide - Page 122
    Setting Menu Screens MENU SELECT 2/3 Screen This page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying an asterix (E) or period (.) in front of the item on the screen. - MENU SE L ECT 2 / 3 ¢ . FUNCT I ON 1 / 5 . FUNCT I ON 2 / 5 . FUNCT I
  • Panasonic AJPD900W | AJPD900W User Guide - Page 123
    MENU SELECT 3/3 Screen This page performs the menu page display ON/OFF settings. The ON/OFF status for each item is indicated by displaying an asterix (E) or period (.) in front of the item on the screen. - MENU SE L ECT 3 / 3 ¢ . LEVEL 1 / 6 . LEVEL 2 / 6 . LEVEL 3 / 6 . LEVEL 4 / 6 . LEVEL 5 / 6
  • Panasonic AJPD900W | AJPD900W User Guide - Page 124
    range -- -- ON OFF ON OFF VF display ENG ENG ENG ENG Remarks Auto black shading (digital) activated Auto white shading (V. SAW) activated Digital black shading compensation Digital white shading compensation The underlined setting in the Variable range column indicates the preset mode. DATA RESET
  • Panasonic AJPD900W | AJPD900W User Guide - Page 125
    and then on again, wait until the display goes off. SLACK Flashes Flashes 4 times per second Flashes 4 times per second Continuous tone Tape wind-up trouble An error code appears in the time code display position of the display window (LCD) and the VTR stops. Check the error code in the
  • Panasonic AJPD900W | AJPD900W User Guide - Page 126
    VTR to the 26-pin/12-pin output adaptor and recording simultaneously with the internal and external VTRs, the REC and TALLY lamps flash if trouble occurs in either VTR. Check the warning displays of each VTR to confirm the error contents. Warning system priorities are as follows. 1 SLACK 2 BATTERY
  • Panasonic AJPD900W | AJPD900W User Guide - Page 127
    in the unit for some reason or other, the following error codes appear in the display window. Code No. 8 9 A B C D E F Contents Solenoid trouble The servo is not locked. Condensation has occurred. Supply reel trouble Take-up reel trouble Capstan trouble Cylinder trouble Loading trouble - 127 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 128
    cassette may damage the video heads. Therefore, read the Handling Instructions for the cleaning tape carefully before use. Cleaning the Viewfinder a air blower available on the market. Characteristic Phenomenon of CCD Cameras Smear Smear occurs when shooting high-intensity subjects, and occurs more easily
  • Panasonic AJPD900W | AJPD900W User Guide - Page 129
    a cassette and close the cassette holder. ¡The cassette is not set to the write protect status. ¡There is no slack in the tape. Inspecting the Camera Section Set the switches as follows. Iris: AUTO Zoom: AUTO WHITE BAL: A or B OUTPUT: BARS Gain: Normally, set to 0 dB. When it is too dark
  • Panasonic AJPD900W | AJPD900W User Guide - Page 130
    Inspections Before Shooting Inspecting the Viewfinder 1 Adjust the position of the viewfinder. 2 Check that the color bar appears on the viewfinder screen, and then adjust the BRIGHT, CONTRAST and PEAKING controls so that the color bar appears clearly on the viewfinder. 3 Check the following items.
  • Panasonic AJPD900W | AJPD900W User Guide - Page 131
    check the electric zoom operation. Check that the image changes to telephoto and wide angle. 2 Set the zoom to manual zoom mode and check the manual zoom operation. Turn the manual zoom lever and check that the image changes to telephoto and wide angle. 3 Set the iris to automatic adjustment mode
  • Panasonic AJPD900W | AJPD900W User Guide - Page 132
    CH2 changes in accordance with the sound level. (3) Inspection of Audio Level Manual Adjustment Functions 1 Set the AUDIO IN CH1/CH2 switch to FRONT [MIC]. and check that the speaker volume changes. 3 Connect an earphone to the PHONES jack. Check that the sound to the speaker is cut off and that
  • Panasonic AJPD900W | AJPD900W User Guide - Page 133
    voltage: Power consumption: DC 12 V 29 W Camera Section Viewfinder Operating temperature: Storage temperature: Operating humidity 5600Ko1/16 ND Quantization: 10-bit A/D (R, G and B channels), 36 MHz Digital signal processing: 16-bit long operation, 36 MHz Horizontal drive frequency: 18.0 MHz
  • Panasonic AJPD900W | AJPD900W User Guide - Page 134
    IN (XLR, 3-pin, female): GENLOCK IN (BNC) TIME CODE IN (BNC): Output CAMERA OUT (BNC): VIDEO OUT (BNC): AUDIO OUT (CH1/CH2/MIX) (XLR, 3-pin, male): AUDIO CH1/CH2 OUT (12-pin, multi connector) (option): TIME CODE OUT (BNC): PHONES (mini-jack∑2): Other DC IN (XLR, 4-pin, male): DC OUT (4-pin): LENS (
  • Panasonic AJPD900W | AJPD900W User Guide - Page 135
    SHAN-C12TCA multi connector cable Audio components AJ-MC700P microphone kit Stereo microphone AJ-MH700P microphone holder WX-RA700 wireless receiver WX-R980 camera attachment Maintenance products AJ-CL12MP cleaning tape AJ-SC900 soft carrying case AJ-HT900 carrying case SHAN-RC700 rain cover - 135 -
  • Panasonic AJPD900W | AJPD900W User Guide - Page 136
    pm (EST) (800)-334-4881/24 hr. Fax (800)-334-4880 Technical Support Emergency 24 hr. Parts & Support (800)-222-0741 Training Information Digital System Products (201)-392-6076 Service Literature (201)-392-6281 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905)-624-5010
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
Operating Instructions
Digital Camera/VTR
P
AJ-