Panasonic AJSD965P AJSD965 User Guide

Panasonic AJSD965P - DVCPRO50 2 HOUR UNIT Manual

Get Panasonic AJSD965P - DVCPRO50 2 HOUR UNIT PDF manuals and user guides View all Panasonic AJSD965P manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AJSD965P manual content summary:

  • Panasonic AJSD965P | AJSD965 User Guide - Page 1
    Operating Instructions Digital Video Cassette Recorder Model No. AJ- P Before operating this product, please read the instructions carefully and save this manual for future use. F1104W0 -F @ Printed in Japan ENGLISH VQT0N87
  • Panasonic AJSD965P | AJSD965 User Guide - Page 2
    . The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance. $ THIS EQUIPMENT MUST BE GROUNDED To ensure safe operation, the three-pin plug must be
  • Panasonic AJSD965P | AJSD965 User Guide - Page 3
    with the limits for a class A digital device, pursuant to Part 15 of and used in accordance with the instruction manual, may cause harmful interference to radio plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug
  • Panasonic AJSD965P | AJSD965 User Guide - Page 4
    16 Rear panel 18 Connections 20 Tapes 22 Jog/Shuttle 23 Manual editing 24 Preroll 24 Automatic editing (deck-to-deck 25 it will cause malfunctioning. Introduction The AJ-SD965 is multi-purpose studio digital VTR which utilize small, 1/4-inch wide cassette tapes for high quality recording
  • Panasonic AJSD965P | AJSD965 User Guide - Page 5
    tapes containing material shot with a consumer digital camera or the like can be played back support the recording and playback of UMID information. In addition, even if a VTR that does not support using these buttons. Digital slow motion/jog dial Panasonic's original digital slow-motion technology
  • Panasonic AJSD965P | AJSD965 User Guide - Page 6
    . The RS-422A enables another VTR to be operated in parallel with the unit if loop connection is used. O 4-channel, high-sound-quality digital audio The 4-channel PCM audio enables independent editing for all four channels in addition to channel mixing. O Menu-based setup The setup settings, which
  • Panasonic AJSD965P | AJSD965 User Guide - Page 7
    Parts and their functions Front panel 1 2 8 9 ON OFF POWER 2X REMOTE DVCPRO 50 DVCPRO DV SUPER REC INH TCG MODE ON ON INT TAPE OFF OFF EXT EE XL/L/M-cassette EJECT COUNTER ASSEM VIDEO CUE TC INSERT RESET CH 1 CH 2 CH 3 CH 4 PF 1 PF 2 PF 3 PF 4 STAND BY PLAYER RECORDER
  • Panasonic AJSD965P | AJSD965 User Guide - Page 8
    be selected using setup menu No.102 (FF. REW MAX). ? EDIT button This button is pressed together with the PLAY button during playback to initiate manual editing. When it is pressed during playback, a search, fast forwarding or rewinding, the input signals in the mode selected by the ASSEM button or
  • Panasonic AJSD965P | AJSD965 User Guide - Page 9
    Parts and their functions (continued) Front panel FA B EC ON OFF POWER 2X REMOTE DVCPRO 50 DVCPRO DV SUPER REC INH TCG MODE ON ON INT TAPE OFF OFF EXT EE XL/L/M-cassette EJECT COUNTER ASSEM VIDEO CUE TC INSERT RESET CH 1 CH 2 CH 3 CH 4 SEARCH SHTL SLOW PUSH JOG PF 1 PF 2
  • Panasonic AJSD965P | AJSD965 User Guide - Page 10
    frame; conversely, when the - button is pressed, it is moved back by one frame. L PREROLL button This button is used to locate where a transmission or manual editing starts on the tape. When it is pressed, the tape travels to the preroll point and stops. The preroll time can be set using
  • Panasonic AJSD965P | AJSD965 User Guide - Page 11
    or the dial on the front panel or issue a tape transport instruction from the controller. The operation performed to release the saving function is on the tape CH1 : Analog input signals CH2 : AES/EBU digital signals CH3 : SDI input digital signals CH4 : Analog input signals O It is possible
  • Panasonic AJSD965P | AJSD965 User Guide - Page 12
    Parts and their functions (continued) Front panel S ON OFF POWER 2X REMOTE DVCPRO 50 DVCPRO DV SUPER REC INH TCG MODE ON ON INT TAPE OFF OFF EXT EE XL/L/M-cassette EJECT COUNTER ASSEM VIDEO CUE TC INSERT RESET CH 1 CH 2 CH 3 CH 4 PF 1 PF 2 PF 3 PF 4 STAND BY PLAYER RECORDER
  • Panasonic AJSD965P | AJSD965 User Guide - Page 13
    ENC CONTROL VIDEO CHROMA SET UP HUE REMOTE LEVEL PRESET LEVEL PRESET BLK PRESET CHROMA PH PRESET TC REGEN REC RUN DIAG LOCAL MANUAL MANUAL MANUAL MANUAL PRESET FREE RUN XY W [ U AUDIO MON SEL (L and R) buttons These buttons are used to select the audio signals which are to be output
  • Panasonic AJSD965P | AJSD965 User Guide - Page 14
    BLK PRESET CHROMA PH PRESET TC REGEN REC RUN DIAG LOCAL MANUAL MANUAL MANUAL MANUAL PRESET FREE RUN \ a ]^_` b \ ENC CONTROL switch REMOTE switch \ is set to LOCAL and the VIDEO LEVEL switch is set to MANUAL, the video output level can be adjusted using the VIDEO LEVEL control. The
  • Panasonic AJSD965P | AJSD965 User Guide - Page 15
    Parts and their functions (continued) Front panel ON OFF POWER 2X REMOTE DVCPRO 50 DVCPRO DV SUPER REC INH TCG MODE ON ON INT TAPE OFF OFF EXT EE XL/L/M-cassette EJECT COUNTER ASSEM VIDEO CUE TC INSERT RESET CH 1 CH 2 CH 3 CH 4 PF 1 PF 2 PF 3 PF 4 STAND BY PLAYER RECORDER
  • Panasonic AJSD965P | AJSD965 User Guide - Page 16
    . VIDEO Y PB PR : Analog component video signals (option) CMPST : Analog composite video signals (option) SDI : Serial digital video signals SDTI/1394 : IEEE 1394 compressed digital signals (option) SG/SG 1/SG 2: Internal reference signals AUDIO ANALOG AES/EBU USER SET SDI SDTI/1394 SG
  • Panasonic AJSD965P | AJSD965 User Guide - Page 17
    Parts and their functions (continued) Display panel 525 625 WIDE REMOTE VIDEO AUDIO SCH SERVO dB dB dB dB 0 0 0 0 CUE = Y PB PR ANALOG U CMPST AES/EBU EDIT REC INH : -4 -4 -4 -4 dB USER SET DVCPRO -8 -8 -8 -8 -8 -12 -12 -12 -12 -12 -16 -16 -16 -16 -16 SDI SDI
  • Panasonic AJSD965P | AJSD965 User Guide - Page 18
    AUDIO CH2 MON OUT L CH3 CH4 MON R 3 (SUPER) OPTION SERVICE ONLY 1 AC IN socket Connect one end of the power cord supplied to this selected using the SUPER switch 4 on the front panel. The digital audio signals which are to be input to these connectors must be synchronized with
  • Panasonic AJSD965P | AJSD965 User Guide - Page 19
    OUT 1 ACTIVE THROUGH 2 CH1 AUDIO CH2 MON OUT L CH3 CH4 MON R 3 (SUPER) OPTION SERVICE ONLY > ?@ A BC D < Fan This fan is used to cool down the VTR. If, Use of an digital video interface board (AJYAD955G, optional accessory) enables input/output interfacing of the digital signals with
  • Panasonic AJSD965P | AJSD965 User Guide - Page 20
    TC OUT SDI IN OUT 1 ACTIVE THROUGH 2 CH1 AUDIO CH2 MON OUT L CH3 CH4 MON R 3 (SUPER) OPTION SERVICE ONLY To video monitor device To audio monitor device Digital audio To video monitor device To audio monitor device Analog video signal (component) OWhen the analog video input
  • Panasonic AJSD965P | AJSD965 User Guide - Page 21
    Video monitor signals Audio monitor signals Video monitor signals Audio monitor signals AV monitor OWhen an editing controller made by CMX is used, support must be provided at the editing controller side. OIf the remote signal (9 pin) connection is to be disconnected from one component and
  • Panasonic AJSD965P | AJSD965 User Guide - Page 22
    is set to 10 seconds. It is recommended that tapes bearing the Panasonic brand be used as the consumer-use DV tapes. ON OFF POWER which have been recorded using the DVCPRO (25M) format in a VTR that supports 184 minutes of DVCPRO (25M) format recording and playback. XL cassettes Tapes enabling
  • Panasonic AJSD965P | AJSD965 User Guide - Page 23
    Jog/Shuttle Jog mode Shuttle mode 1 Press the search dial so that it remains pressed in. Check that the JOG lamp has lit. 2 Turn the search dial. The dial's click-stops are released, and the tape is played back at the speed (-1a to +1a) corresponding to the speed at which the dial is turned. The
  • Panasonic AJSD965P | AJSD965 User Guide - Page 24
    Manual editing 1 Select the editing mode. ASSEMBLE: Assemble (frame-to-frame continuity) editing is performed in this mode. INSERT: Insert editing is performed in this mode. 2
  • Panasonic AJSD965P | AJSD965 User Guide - Page 25
    Automatic editing (deck-to-deck) Switch settings and adjustments When using the AJ-SD965 as the recorder 1 Set the POWER switch to ON. When using the AJ-SD965 as the player 1 Set the POWER switch to ON. 2 2 Use the INPUT SELECT buttons to select the video Set the AUDIO VOL SEL (REC/PB) switch to
  • Panasonic AJSD965P | AJSD965 User Guide - Page 26
    Automatic editing (deck-to-deck) (continued) Selecting the editing mode Registering the edit points 1 Select the editing mode. For assemble editing, press the ASSEM button. For insert editing, press the INSERT button. ASSEM: This sets the unit to assemble (frame-to-frame continuity) editing mode.
  • Panasonic AJSD965P | AJSD965 User Guide - Page 27
    Automatic editing (deck-to-deck) (continued) Checking and previewing edit points 1 Press the IN (or OUT) button to check the edit point. The value of the registered edit point appears on the display panel. 2 While holding down the IN (or OUT) button, press the PREROLL button and check the picture
  • Panasonic AJSD965P | AJSD965 User Guide - Page 28
    Automatic editing (deck-to-deck) (continued) Modifying edit points 1 Re-registering an edit point Locate the new edit point by performing the jog or shuttle operation, and press the IN (or OUT) button and SET button at the same time to re-register the edit point. 2 Modifying an edit point in 1-
  • Panasonic AJSD965P | AJSD965 User Guide - Page 29
    Automatic editing (deck-to-deck) (continued) Executing and reviewing automatic editing 1 Press the AUTO EDIT button. Automatic editing is now executed. O To suspend editing at any time, press the STOP button. O When the edit OUT point is reached, the tape is post-rolled, after which it stops. Post
  • Panasonic AJSD965P | AJSD965 User Guide - Page 30
    Audio split editing The video edit points and audio edit points can be registered independently, and editing can be executed with the video point offset from the audio points. Audio edit points cannot be registered when the assemble editing mode has been selected. After registering the edit points,
  • Panasonic AJSD965P | AJSD965 User Guide - Page 31
    Audio split editing (continued) $ Duration display The duration can be indicated on the display panel only. Between the video IN and OUT points: Press the IN button and OUT button at the same time. Between the audio IN and OUT points: Press the A IN button and A OUT button at the same time. Match
  • Panasonic AJSD965P | AJSD965 User Guide - Page 32
    Variable memory editing Using the unit as a controller (deck-to-deck editing mode recorder) to control the playback speed of the VTR used as the player, editing can be performed in speed variable mode. $ Selecting the variable memory mode When deck-to-deck editing (either the RECORDER or PLAYER
  • Panasonic AJSD965P | AJSD965 User Guide - Page 33
    PF (Programmable Function) functions Four most frequently used setup items can be registered in the four PF buttons. Registering setup items in the PF buttons PF1 PF2 PF3 PF4 7 2•4 ON OFF POWER 2X REMOTE DVCPRO 50 DVCPRO DV SUPER REC INH TCG MODE ON ON INT TAPE OFF OFF EXT EE XL
  • Panasonic AJSD965P | AJSD965 User Guide - Page 34
    Setup (initial settings) This VTR's main settings are performed while making selections using a system of menus. FF button 4 3 ON OFF POWER 2X REMOTE DVCPRO 50 DVCPRO DV SUPER REC INH TCG MODE ON ON INT TAPE OFF OFF EXT EE XL/L/M-cassette EJECT COUNTER ASSEM VIDEO CUE TC INSERT
  • Panasonic AJSD965P | AJSD965 User Guide - Page 35
    Setup menus This VTR can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use. Changing the file 1 Press the MENU (SHIFT+RECORDER). 2 When the FF button is pressed while holding down the SHIFT button, the next user file is selected
  • Panasonic AJSD965P | AJSD965 User Guide - Page 36
    Setup menus (continued) Loading user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file. USER 1 Load/save Load/save Load/save Load/save
  • Panasonic AJSD965P | AJSD965 User Guide - Page 37
    Setup menus (continued) Saving user files 1 Press the MENU (SHIFT+RECORDER). 2 Press the REW button or FF button while holding down the SHIFT button to select the USER1 file. 3 Turn the search dial to move the cursor (2) on the menu screen to No. A01 (SAVE). SETUP-MENU MENU NO.A00-
  • Panasonic AJSD965P | AJSD965 User Guide - Page 38
    Setup menus (continued) SYSTEM menu No./Item Description 00 WFM SEL 11 This selects the signal to output from the VIDEO OUT 2 connector. 0000 CTL : The CTL signal is output. 0001 TC : The TIME CODE signal is output. 0002 VIDEO : The VIDEO OUT signal is output. 0003 RF_L : The PB L RF
  • Panasonic AJSD965P | AJSD965 User Guide - Page 39
    Setup menus (continued) SYSTEM menu No./Item Description 18 System phase adjustment. SYS H OFFSET 0000 -3 : -13.4 µsec 0001 -2 : -8.96 µsec 0002 -1 : -4.52 µsec 0003 0 : 0 sec 0004 1 : +4.52 µsec 0005 2 : +8.96 µsec 0006 3 : +13.4 µsec Factory settings will remain
  • Panasonic AJSD965P | AJSD965 User Guide - Page 40
    Setup menus (continued) USER menu No./Item Description 000 P-ROLL TIME This sets the preroll time. The preroll time can be set from 0 to 15 seconds in 1-second increments. 001 LOCAL ENA 0000 : 0005 : 0015 0s : When the automatic editing 5s mode [PREVIEW, AUTO : EDIT] is set,
  • Panasonic AJSD965P | AJSD965 User Guide - Page 41
    This sets the format in which the tape is to be played back. 0000 MANUAL : The format complies with the setting of setup menu No. 012 (SYS the tape. OWhen an editing mode has been selected, the "MANUAL" setting is forcibly established for internal operations. OWhen AUTO has been selected
  • Panasonic AJSD965P | AJSD965 User Guide - Page 42
    Setup menus (continued) USER menu No./Item Description 100 This selects the direct search dial operation. SEARCH ENA 101 SHTL MAX 102 FF. REW MAX 104 REF ALARM 0000 DIAL : For direct search dial operations. 0001 KEY : Operation is not transferred to the search mode unless the
  • Panasonic AJSD965P | AJSD965 User Guide - Page 43
    Setup menus (continued) USER menu No./Item 109 AUTO REW 110 MEMORY STOP Description This selects whether to rewind the tape automatically to the tape start when the tape end is detected. 0000 0001 OFF : The tape stops at the tape end. ON : The tape is rewound to the tape start.
  • Panasonic AJSD965P | AJSD965 User Guide - Page 44
    Setup menus (continued) USER menu No./Item Description 114 This selects whether to cause the REC INH lamp to flash or light up when the cassette REC INH LAMP has been set to the accidental erasure prevention status. 0000 LIGHT : The lamp lights up. 0001 FLASH : The lamp flashes.
  • Panasonic AJSD965P | AJSD965 User Guide - Page 45
    DVCPRO 0002 ORIG OID information of any VTR except for the DVCPRO's is set in OTHER. OThe ORIG setting should only be used when a Panasonic controller (AG-A850 etc. sold separately) is connected. This selects whether the PARALLEL (25P) connector is to function when the REMOTE button is set
  • Panasonic AJSD965P | AJSD965 User Guide - Page 46
    -STD) Use the non-standard (N-STD) setting when video or audio trouble occurs with signals from laser discs or a satellite. This selects the video signal audio preset when editing the digital audio of the VTR using a controller which does not have a digital audio edit preset control function.
  • Panasonic AJSD965P | AJSD965 User Guide - Page 47
    ON : Simultaneous playback Simultaneous playback is valid when the MODE switch is set to TAPE. This selects the connection method for the digital audio edit IN point. 0000 CUT : Cut processing 0001 FADE : V Fade processing 312 AUD EDIT OUT This selects the connection method for the
  • Panasonic AJSD965P | AJSD965 User Guide - Page 48
    Setup menus (continued) USER menu No./Item Description 324 This sets the maximum JOG REV speed. JOG REV MAX 0000 -4.1 : -4.1 (-3.1)a speed 0001 -1.85 : -1.85a speed 0002 -1 : -1a speed 0003 -0.43 : -0.43 (-0.5)a speed OThe value for the DV/DVCAM tape is shown in
  • Panasonic AJSD965P | AJSD965 User Guide - Page 49
    Setup menus (continued) USER menu No./Item Description 500 VITC BLANK For selecting whether to output the VITC signal at the positions selected by setup menu items No. 501 (VITC POS-1) and No. 502 (VITC POS-2). 501 VITC POS-1 502 VITC POS-2 503 TCG REGEN 0000 BLANK : VITC signals
  • Panasonic AJSD965P | AJSD965 User Guide - Page 50
    Setup menus (continued) USER menu No./Item Description 511 VITC OUT This selects how the VITC which is to be superimposed onto the output video signal is to be output. 512 TC OUT ADV 0000 SBC : During recording: The input time code, which was selected by the setup menu No. 505 (
  • Panasonic AJSD965P | AJSD965 User Guide - Page 51
    Setup menus (continued) USER menu No./Item Description 600 This selects the internal reference signal. INT SG 601 OUT VSYNC 0001 BB : The black burst is generated. 0002 CB100 : 100% color bars are generated. 0003 CB75 : 75% color bars are generated. This selects whether to
  • Panasonic AJSD965P | AJSD965 User Guide - Page 52
    form. 0001 CUT : The signal is recorded with the 7.5% setup removed. This selects the 7.5% setup processing for the output composite, component and serial (digital) signal. 0000 THRU : The signal is output in its original form. 0001 CUT : The signal is output with the 7.5% setup removed. 0002 ADD
  • Panasonic AJSD965P | AJSD965 User Guide - Page 53
    form. 0001 CUT : The signal is recorded with the 7.5% setup removed. This selects the 7.5% setup processing for the output composite, component and serial (digital) signal. 0000 THRU : The signal is output in its original form. 0001 CUT : The signal is output with the 7.5% setup removed. 0002 ADD
  • Panasonic AJSD965P | AJSD965 User Guide - Page 54
    Setup menus (continued) USER menu No./Item 660 UMID REC 661 UMID GEN 662 UMID POS Description This selects whether or not to record the UMID information on the tape. 0000 OFF : UMID information is not recorded on the tape. In addition, EE output signals are blanked. 0001 ON : UMID
  • Panasonic AJSD965P | AJSD965 User Guide - Page 55
    input when USER SET has been selected by pressing the unit's AUDIO input selector button. 718 CH4 IN SEL 0000 0001 ANA : Analog input. DIGI : Digital input. This selects the CH4 input when USER SET has been selected by pressing the unit's AUDIO input selector button. 719 D IN SEL12 0000 0001
  • Panasonic AJSD965P | AJSD965 User Guide - Page 56
    Setup menus (continued) USER menu No./Item Description 721 This selects the monitor output. MONI CH SEL 726 REC CUE 727 PB FADE 0000 MANU : The output signal is as selected in MONITOR SELECT buttons. 0001 AUTO : PCM AUDIO output is selected within the -0.43 (-0.5)a to +1a speed range;
  • Panasonic AJSD965P | AJSD965 User Guide - Page 57
    Setup menus (continued) USER menu No./Item Description 750 DV PB ATT 751 REC PT MUTE This selects the audio output level during DV playback. 0000 0001 OFF : The audio output level is not attenuated. ON : The audio output level is attenuated (reduced). This selects whether to mute the
  • Panasonic AJSD965P | AJSD965 User Guide - Page 58
    Setup menus (continued) USER menu No./Item Description 800 ADD LINE 25 Sub-screen 00 REC LINE1 For selecting the mode for recording signals on additional lines. 0000 OFF : No signals are recorded on additional lines. 0001 YC422 : The 422 mode signals are recorded on 1 line. 0002
  • Panasonic AJSD965P | AJSD965 User Guide - Page 59
    Setup menus (continued) USER menu No./Item Description 801 ADD LINE 50 Sub-screen 00 REC LINE1 For selecting the mode for recording signals on additional lines. 0000 OFF : No signals are recorded on additional lines. 0001 YC422 : The 422 mode signals are recorded on 2 lines. 0002
  • Panasonic AJSD965P | AJSD965 User Guide - Page 60
    Setup menus (continued) USER menu No./Item Description 803 TELETEXT DET Sub-screen For selecting the method used to detect the lines in which the teletext signals are to be recorded. 0000 OFF : The teletext signals are not recorded. 0001 AUTO : The teletext signals are automatically
  • Panasonic AJSD965P | AJSD965 User Guide - Page 61
    Setup menus (continued) USER menu No./Item Description 900 LCD PROTECT This sets the LCD monitor's saving function (see page 11). 0000 OFF : The saving function is not established. 0001 ON : The saving function is established. 901 BL BRIGHT This sets the brightness of the LCD
  • Panasonic AJSD965P | AJSD965 User Guide - Page 62
    (SHIFT+PLAYER) to set the start number of the time code or user bit. 1 Press the TC PRESET (SHIFT+PLAYER). The left-most set of digits starts flashing. 2To change the value, turn the search dial while holding down the search button. 3 Turn the search dial to select the set of
  • Panasonic AJSD965P | AJSD965 User Guide - Page 63
    Time code/user bit (continued) Setting the external time code Reproducing the time code/user bit 1 Set the VTR to stop mode. 1 Set the VTR to stop mode. 2 Select "TC" using the COUNTER button. 2 Select "TC" or "UB" using the COUNTER button. 3 Set the TCG switch to EXT. (External time code
  • Panasonic AJSD965P | AJSD965 User Guide - Page 64
    Superimpose screen The control signals, time code, etc. are displayed using abbreviations. TV monitor Characters displayed The background of characters superimposed on the display can be changed using setup menu No. 011 (CHARA TYPE). TCR 22 : 22 : 22 : 22 TCR 22 : 22 : 22 : 22 TCR 22 : 22 : 22
  • Panasonic AJSD965P | AJSD965 User Guide - Page 65
    Video output signals and servo reference signal This section explains how the output signals and servo reference signal are selected. External synchronization of video output signals The video output signals are output in synchronization with the REF VIDEO input signal or video input signal. As
  • Panasonic AJSD965P | AJSD965 User Guide - Page 66
    Video output signals and servo reference signal (continued) Servo reference signal The REF VIDEO input signal or video input signal is selected as the servo reference signal. As shown in the figure below, the signal is selected in accordance with the setup menu settings, VTR mode and availability
  • Panasonic AJSD965P | AJSD965 User Guide - Page 67
    Audio V fade function When editing tapes, the edit point splicing selection (setup menu No. 311 and 312) information is recorded on the tape. This information is then sensed during playback, and V fade or cut processing is automatically performed for these sections. However, only when the playback
  • Panasonic AJSD965P | AJSD965 User Guide - Page 68
    Audio recording channel and monitor output selection Audio recording channel Monitor output channel The audio recording channels are selected on the AUDIO setup menu as shown below. Recording track CH1 CH2 CH3 CH4 CUE Recording signal CH1 input/CH2 input/CH1 input+CH2 input CH1 input/CH2 input/
  • Panasonic AJSD965P | AJSD965 User Guide - Page 69
    rail and bracket (model number CC3061-99-0400) by Chassis Trak be used. (The complete slide rail and bracket unit is not available from Panasonic.) For further details, consult your dealer. 4 Attach the AJ-MA75P rack mount adapter using the same 4 screws. 1 Attach the inner members of the slide
  • Panasonic AJSD965P | AJSD965 User Guide - Page 70
    the video heads be cleaned as and when appropriate. For further details on how to actually clean the heads, consult with one of our service companies or with your dealer. Condensation Condensation occurs due to the same principle involved when droplets of water form on a window pane of a heated
  • Panasonic AJSD965P | AJSD965 User Guide - Page 71
    VOL SEL ENC CONTROL VIDEO CHROMA SET UP HUE REMOTE LEVEL PRESET LEVEL PRESET BLK PRESET CHROMA PH PRESET TC REGEN REC RUN DIAG LOCAL MANUAL MANUAL MANUAL MANUAL PRESET FREE RUN 1•3 71
  • Panasonic AJSD965P | AJSD965 User Guide - Page 72
    Error messages (continued) $ Displaying the "HOURS METER" information Turn the search dial to move the cursor (2). The description for the item where the cursor is located is shown on the counter display. If "T&S&M" is selected in the setup menu No. 008 (DISPLAY SEL), a message appears in the mode
  • Panasonic AJSD965P | AJSD965 User Guide - Page 73
    Error messages (continued) Warning messages Priority High OMonitor display ODescription OVTR operation and corrective action E-10 (FAN STOP) This is displayed when the fan motor stops. VTR: Operation continues. OCheck that nothing is obstructing the fan movement. E-09 (NO RF) This appears during
  • Panasonic AJSD965P | AJSD965 User Guide - Page 74
    Error messages (continued) Error messages Display ODescription OVTR operation and corrective action E-20 DEW If condensation is detected, the error number flashes and the unit transfers to eject mode. The drum rotates after the cassette is ejected to eliminate the condensation. Once the unit is
  • Panasonic AJSD965P | AJSD965 User Guide - Page 75
    , this error number flashes on the display. VTR: STOP OSet the POWER switch to OFF and then to ON again. E-78 SVDR COMM ERROR If a problem has been encountered in communication between the servo microcomputer and servo drive board, this error number flashes on the display. VTR: STOP OSet the POWER
  • Panasonic AJSD965P | AJSD965 User Guide - Page 76
    setup menu item No. 209 "RETURN ACK". Hardware specifications External interface specifications O Connector specifications Connector: D-SUB 25-pin (crossover cable supported) Pin No. 1 2 3 4 5 6 7 20 Signal FG RXD TXD CTS RTS DTR SG DSR Description Protective ground (Frame ground) Received data
  • Panasonic AJSD965P | AJSD965 User Guide - Page 77
    RS-232C interface (continued) Software specifications (Protocol) 1. Communication parameters Communication Asynchronous, full duplex system Communication speed Bit length 300/600/1200/2400/4800/9600 7bit/8 bit Stop bit 1 bit/2 bit Parity bit NONE/ODD/EVEN ACK code ACK code returned/ACK
  • Panasonic AJSD965P | AJSD965 User Guide - Page 78
    [ETX] 5 [ACK] [STX] OPL [ETX] $ When the communication has terminated abnormally [NACK] 15h $ When processing is not possible due to incorrect data or trouble in the VTR 1. The receive completion message is returned. [ACK] 06h 2. An error code is returned. [STX] [E R N1 N2 N3 ] [ETX] 02h Error
  • Panasonic AJSD965P | AJSD965 User Guide - Page 79
    RS-232C interface (continued) 5. Command table $ Commands relating to operation control O As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is subsequently returned. It is only the execution message which is listed in this
  • Panasonic AJSD965P | AJSD965 User Guide - Page 80
    OBF : STANDBY OFF OSF : SHTL FORWARD OSR : SHTL REVERSE OJG : JOG FORWARD/REVERSE OSW : VAR FORWARD/REVERSE EAE : AUTO EDIT EON : EDIT ON (MANUAL EDIT) EPV : PREVIEW ERV : REVIEW VTR operation ID (VTR No.) REQUEST Send command Return (completion) message [STX] QID [ETX] 45 [STX] data [ETX
  • Panasonic AJSD965P | AJSD965 User Guide - Page 81
    ) BNCa2 (CH1/CH2, CH3/CH4) AES/EBU format AUDIO IN (ANALOG) XLRa4 (CH1, CH2, CH3, CH4) TIME CODE IN XLRa1 AUDIO OUT SDI OUT (DIGITAL) AUDIO OUT (DIGITAL) AUDIO OUT (ANALOG) TIME CODE OUT MONITOR OUT HEADPHONES (front) BNCa3 BNCa2 (CH1/CH2, CH3/CH4) AES/EBU format XLRa4 (CH1, CH2, CH3, CH4
  • Panasonic AJSD965P | AJSD965 User Guide - Page 82
    pins: TTL level, active low, 6100ms edge electrical signal. O STATUS pins: open collector, sink current 6 mA RS-232C D-SUB 25-pin (crossover cable supported) Pin No. 1 2 3 4 5 6 7 20 Signal FG RXD TXD CTS RTS DTR SG DSR Description Protective ground (Frame ground) Received data (Data is sent to
  • Panasonic AJSD965P | AJSD965 User Guide - Page 83
    7/16 inches (424 mma175.2 mma417 mm) (Not including the support legs, connectors, and JOG dial) Recording format: DVCPRO50/DVCPRO 5P126XG) Less than 2 min (with AJ-P126LP) Less than 1 min (with AJ-P66MP) Digital slow: -0.43a to +0.43a, +0.5a, +0.75a speed (DVCPRO, DVCPRO50) Editing accuracy: ±0
  • Panasonic AJSD965P | AJSD965 User Guide - Page 84
    ] $ Audio input connector Analog input (CH1, CH2, CH3, CH4): XLRa4, 600Ω/high impedance selectable (factory setting: high impedance), +4/0/-20 dBu selectable Digital input (CH1/CH2, CH3/CH4): BNCa2, AES/EBU format SDI input: BNCa2, active through, complies with SMPTE272M-A/ITU-R BT.656-4 standard
  • Panasonic AJSD965P | AJSD965 User Guide - Page 85
    Memo
  • Panasonic AJSD965P | AJSD965 User Guide - Page 86
    . Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Model No.
AJ-
P
Digital Video Cassette Recorder
Operating Instructions
Before operating this product, please read the instructions carefully and save this manual for future use.
VQT0N87
F1104W0 -F
@
Printed in Japan
ENGLISH