Panasonic BB-HCS301A Network Camera Server

Panasonic BB-HCS301A - Network Camera Server Manual

Get Panasonic BB-HCS301A - Network Camera Server PDF manuals and user guides
UPC - 037988845019
View all Panasonic BB-HCS301A manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic BB-HCS301A manual content summary:

  • Panasonic BB-HCS301A | Network Camera Server - Page 1
    POWDECR IN VIDEO IN AUDIO IN IN Operating Instructions Network Camera Server Model No. BB-HCS301A Please read this manual before using and save this manual for future reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam for customers in the USA or Puerto Rico
  • Panasonic BB-HCS301A | Network Camera Server - Page 2
    party. This product increases security by using IPsec and password authentication. *1 To connect in IPv6, subscribe to the ISP's "IPv4/IPv6 Dual-Stack" or "IPv6 over IPv4 Tunneling" service. This product does not work in IPv6-only network. *2 Audio feature does not work on cell phones. Talk button
  • Panasonic BB-HCS301A | Network Camera Server - Page 3
    in a static image. DynamicDNS Service Supported DynamicDNS service allows you to access this product over the Internet with your favorite domain name (e.g. bob.viewnetcam.com) instead of a global IP address. Multi-Language Display Top page, Single Camera and Multi-Camera page can be displayed in
  • Panasonic BB-HCS301A | Network Camera Server - Page 4
    Operating Instructions Example of connection Analog Camera Microphone (Local Audio) Amplifier or mixer Monitor Amplifier I/O IN OUT AUDIO IN OUT IN VIDEO OUT 12 V Speaker Network Speaker Microphone (Remote Audio) Note When using the video output terminal, securely connect a cable
  • Panasonic BB-HCS301A | Network Camera Server - Page 5
    Instructions Example of cascade connection Maximum accesses can be increased by connecting two or more products. Analog Camera Microphone Amplifier or mixer I/O IN OUT AUDIO IN OUT IN VIDEO OUT 12 V Hub, router I/O IN OUT AUDIO IN OUT IN VIDEO Panasonic Network Camera BB-
  • Panasonic BB-HCS301A | Network Camera Server - Page 6
    of their respective owners. • This software is based in part on the work of the Independent JPEG Group. Abbreviations • UPnP is the abbreviation for "Universal Plug and Play". • "Network Camera" or "Analog Camera connected to this product" is called "Camera" in this Operating Instructions. 6
  • Panasonic BB-HCS301A | Network Camera Server - Page 7
    Operating Instructions Table of Contents 1 Camera Monitoring 10 1.1 Product Feature Locations 10 1.2 1.2.1 1.3 1.3.1 1.3.2 1.3.3 1.4 Accessing this Product 12 To Access this Product in IPv6 14 Viewing Single Camera page 16 Zooming In and Out 22 Capturing a Still Image 23 Using Operation
  • Panasonic BB-HCS301A | Network Camera Server - Page 8
    Alarm Log 121 2.26 Changing Initial Settings on the Single Camera page or the Multi- Camera page 123 2.27 Configuring Multiple Images 126 2.28 Firmware 135 Creating Configuration File 138 Loading Settings from a Configuration File 139 Resetting this Product to Factory Default 140 Support
  • Panasonic BB-HCS301A | Network Camera Server - Page 9
    Operating Instructions 3.7 3.8 3.8.1 3.8.2 3.8.3 3.9 3.10 3.11 3.12 3.13 Using Setup Program 155 Setting Your PC 159 Setting the Proxy Server Settings on Web Browser 159 Setting UPnP™ to Display the Shortcut in My Network Places 162 Setting the Internet Temporary File Setting on Web Browser
  • Panasonic BB-HCS301A | Network Camera Server - Page 10
    Operating Instructions 1 Camera Monitoring 1.1 Product Feature Locations Front View Power Indicator The color display shows this product's status. SD Memory Card Slot Insert the SD Memory card. (see page 165) FACTORY DEFAULT RESET Button Pushing the button resets this product to factory default.
  • Panasonic BB-HCS301A | Network Camera Server - Page 11
    DC IN jack Use the attached specified AC adaptor. Video Output Terminal (BNC Terminal)* Connect it to the video input terminal of the monitor. Video Input Terminal (BNC Terminal)* Connect it to the video output terminal of the camera. Audio Output Terminal (see page 26) * Terminating resistance (75
  • Panasonic BB-HCS301A | Network Camera Server - Page 12
    Troubleshooting on the Setup CD-ROM. E.g. http://192.168.0.253:50000 (in IPv4) http:// .viewnetcam.com:50000 (in IPv6) 3. The Enter Network Password window is displayed, and enter the user name and password IPv4, IPv6 or IPsec connection. A To Single Camera page (page 16) C To Buffered Image
  • Panasonic BB-HCS301A | Network Camera Server - Page 13
    Operating Instructions Notes • When users other than an administrator are accessing this product, [Setup] and [Maintenance page (see page 74), [Login] tab will not be displayed. • If [View Multi-Camera page] or [View Buffered Image page] is not permitted on the General User page (see page 78), [Multi
  • Panasonic BB-HCS301A | Network Camera Server - Page 14
    additional IP addresses that will be needed as the Internet continues to expand. • IPv6 is expected to gradually replace IPv4, with the 2 coexisting for a number of years during a transition period. • Though most ISPs (Internet Service Providers) do not yet support IPv6, many local networks already
  • Panasonic BB-HCS301A | Network Camera Server - Page 15
    Operating Instructions Setting up the IPv6 Router, your PC, and this Product Setting up the IPv6 Router Set up the router as you subscribe to the IPv6 service. If the access from WAN side is disabled on the router, enable the TCP packets from WAN side in the packet filtering. Setting up your
  • Panasonic BB-HCS301A | Network Camera Server - Page 16
    Operating Instructions 1.3 Viewing Single Camera page 1. Access this product (see page 12). • The Top page is displayed. 2. Click the [Single] tab at the [Motion] by default. You can change it on the operation bar (see page 24). • Refresh interval may change depending on the network condition, PC
  • Panasonic BB-HCS301A | Network Camera Server - Page 17
    Operating Instructions • To reduce the data traffic, the video can be automatically changed to refreshing still images on the General User page (see page 78). • To display the Single Camera page directly, add it to the [Favorites] on the web browser. • When the IP address was changed for this
  • Panasonic BB-HCS301A | Network Camera Server - Page 18
    Operating Instructions Security Warning window To view a video (Motion JPEG) or to use audio feature, ActiveX® Controls must be installed. When trying to display a video for the first time, Security Warning window will be displayed. When using Windows XP or Windows 2000, log in as an administrator
  • Panasonic BB-HCS301A | Network Camera Server - Page 19
    Operating Instructions Security Warning window on Microsoft Windows XP Service Pack 2 To view a video (Motion JPEG) or to use audio feature, ActiveX Controls must be installed. Follow the steps shown below to install ActiveX Controls. 1. Click the warning displayed above the tabs, and click [Install
  • Panasonic BB-HCS301A | Network Camera Server - Page 20
    Operating Instructions The Image Output from the Video Output Terminal and the Image Displayed on the Web Browser • The video output terminal outputs the image from the video input terminal as it is. The following features are effective only for the image on your web browser, and not effective for
  • Panasonic BB-HCS301A | Network Camera Server - Page 21
    Operating Instructions The Banner When this product accesses the Internet, the banner displays product information about products or announcements about the latest firmware, etc. from Panasonic. Whether or not to display the banner can be set at Banner Display (see page 123). Notes • The banner is
  • Panasonic BB-HCS301A | Network Camera Server - Page 22
    Operating Instructions 1.3.1 Zooming In and Out This product has a 10× digital zoom feature. There are 2 methods of increasing/decreasing the size of the object on the Single Camera screen, the Multi Camera screen, and the Buffered Image screen (only while playing video): 1. Rotating the mouse wheel
  • Panasonic BB-HCS301A | Network Camera Server - Page 23
    can be saved on your PC. 1. Select a resolution to display an image. 2. Click the capture image button. Capture Image Button Operating Instructions • The camera image opens in another window. 3. Right-click the image, and select [Save Picture As...]. • Save as dialog box is displayed. 4. Specify
  • Panasonic BB-HCS301A | Network Camera Server - Page 24
    Operating Instructions 1.3.3 Using Operation Bar Output Control: Controls output signals of the External I/O. Refresh Interval: Sets a refresh interval. (Motion-60-second interval) Resolution: Selects [640 × 480] or [320 × 240] (default) pixels. Image Quality: Selects the image quality. • [
  • Panasonic BB-HCS301A | Network Camera Server - Page 25
    Top page is displayed. 2. Click the [Single] tab at the top of the page. 3. The Audio Control Bar (Talk Button, Listen Button and Adjustment Bar) is displayed at the top of the screen. Listening or Talking is selected by using the 2 icons. For general users, the feature must be enabled, otherwise it
  • Panasonic BB-HCS301A | Network Camera Server - Page 26
    of users for listening are reduced. - Talk feature cannot be used from a PC when this product is accessed via a proxy server. - To talk from your PC, the see page 14 of the Troubleshooting on the Setup CD-ROM. Audio Output Terminal Audio Input Terminal POWDECR IN VIDEO IN AUDIO IN IN I/O IN
  • Panasonic BB-HCS301A | Network Camera Server - Page 27
    select [All] at the View Type, video (Motion JPEG) or audio buttons are not displayed. Selects [320 × 240] (default) or [160 × 120] pixels resolution. Selects a refresh interval (Motion-60-second interval). When clicking the camera name, the Single Camera page is displayed on another window. Audio
  • Panasonic BB-HCS301A | Network Camera Server - Page 28
    can be used. (only for video) • Click to Center feature can be used while using the digital zoom. When the image is not displayed on the Multi-Camera page • Confirm that the Internet IP address is specified for each this product or Panasonic Network Camera and that each camera is connected to the
  • Panasonic BB-HCS301A | Network Camera Server - Page 29
    Operating Instructions 1.6 Viewing Buffered Image page To buffer the images on the internal memory, you need to set up image transfer settings (see page 82, page 91
  • Panasonic BB-HCS301A | Network Camera Server - Page 30
    Operating Instructions 4. Display images clicking buttons below. Date and time of the day when the images were buffered are displayed. Date, time and frame number See page 166 for the SD memory card capacity. • The digital zoom can be used while viewing buffered images (only while playing video). 30
  • Panasonic BB-HCS301A | Network Camera Server - Page 31
    Operating Instructions 1.6.1 Deleting Buffered Images If you intend to delete images for off this product. - Saving the Date and Time page. - Restarting, updating firmware or resetting this product to factory default. - Changing the check box setting for [Enable Image Buffer/Transfer]. (See page
  • Panasonic BB-HCS301A | Network Camera Server - Page 32
    Operating Instructions 1.7 Viewing Still Images on Your Cell Phone You can view still images over the Internet from a compatible cell phone. Enter "http://IP address (or URL):Port Number/mobile" on a cell phone and press [OK]. • When the port number is set to 80 (default), it is not required.
  • Panasonic BB-HCS301A | Network Camera Server - Page 33
    :// IP address(or URL):Port Number/MobileX for XHTML. (or .viewnetcam.com:50000/MobileX) • Some cell phones are not compatible with this product. Some phones may allow viewing only on port 80, and some may not support password authentication. See the Panasonic support website at http://panasonic
  • Panasonic BB-HCS301A | Network Camera Server - Page 34
    Operating Instructions 2 Various Product Features 2.1 Using Product Features 1. Access this product (see page 12). • tabs are not displayed. • If [View Multi-Camera page] or [View Buffered Image page] is not permitted on the General User page, [Multi-Camera] or [Buffered Image] tab will not be
  • Panasonic BB-HCS301A | Network Camera Server - Page 35
    Operating Instructions Basic (1) Network (IPv4) Configures the IPv4 network settings to connect this product to the network (see page 37). (2) Network (IPv6) Configures the IPv6 network settings to connect this product to the network (see page 41). (3) IPsec Enables IPsec (Transport or Tunnel
  • Panasonic BB-HCS301A | Network Camera Server - Page 36
    Operating Instructions Advanced (14) Image Display Sets resolution, image quality and refresh interval of Single Camera and Multi-Camera page, time stamp setting, language and banner (see page 123). (15) Multi-Camera*1 Sets this product or Panasonic Network Camera IP address or host name, camera
  • Panasonic BB-HCS301A | Network Camera Server - Page 37
    data field. Automatic Setup This product automatically obtains the network settings (subnet mask, default gateway and DNS server address) utilizing a DHCP feature on the router. This product also automatically searches the unused IP address on your network. If you select [Yes] at the Allow Access
  • Panasonic BB-HCS301A | Network Camera Server - Page 38
    Operating Instructions DHCP Setup Static Setup • Clicking [Cancel] takes you back to the previous page without saving changes. 4. Click [Save] when finished. • New settings are saved. • When finished, the following page is displayed. Note The current network settings are shown on the Status page
  • Panasonic BB-HCS301A | Network Camera Server - Page 39
    Instructions Notes • When you do not know the IP call it "Address Translation", "Static IP Masquerade", "Virtual Server" or "Port Mapping"). To enable the network settings, clear the check box. The port number is 80 by default. When you use multiple products with a router on your network, each
  • Panasonic BB-HCS301A | Network Camera Server - Page 40
    the DynamicDNS service - Using the alarm log notification If you have the assigned DNS server addresses by your ISP or network administrator, the Troubleshooting on the Setup CD-ROM. • This setting is valid in both IPv4/IPv6. *1 If you automatically obtain the IP address from the DHCP server, you
  • Panasonic BB-HCS301A | Network Camera Server - Page 41
    to this product. • [Static] allows the user to use a specific IPv6 address. Note IPv6 is the expanded protocol created for future Internet expansion. Your network and your ISP must support IPv6 before you can use this feature. 1. Click [Network (IPv6)] on the Setup page. 2. Click a connection mode
  • Panasonic BB-HCS301A | Network Camera Server - Page 42
    Operating Instructions Static Setup You can assign a static IPv6 address to this finished. • New settings are saved. • When finished, the following page is displayed. Note The current network settings are shown on the Status page in the Maintenance section (see page 133). 5. Click [Restart].
  • Panasonic BB-HCS301A | Network Camera Server - Page 43
    Operating Instructions Notes • When you do not know this product IP address while setting [Automatic Setup], same IPv6 prefix as this product. The port number is 80 by default. The port number must be unique for each terminal on your network. Do not set the following port numbers. E.g., FTP: 20 and
  • Panasonic BB-HCS301A | Network Camera Server - Page 44
    - Using the DynamicDNS service - Using the alarm log notification • If you have the assigned DNS server IPv6 addresses by your ISP or network administrator, enter them in cannot access this product, see page 7 of the Troubleshooting on the Setup CD-ROM. • This setting is valid in both IPv4/IPv6. 44
  • Panasonic BB-HCS301A | Network Camera Server - Page 45
    Operating Instructions 2.4 What is IPsec? IPsec provides security for the transmission of sensitive information over unprotected networks such as the Internet. IPsec authenticates IP packets between participating IPsec devices. Unreadable Malicious User Image POWDECR IN VIDEO IN AUDIO IN IN
  • Panasonic BB-HCS301A | Network Camera Server - Page 46
    VIDEO IN AUDIO IN IN Encrypted Prepare the following requirements. Item PC Camera Server Supported Feature Operating System : Windows XP Service . See the Panasonic support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for the setup. ISP Service : Services for multiple global
  • Panasonic BB-HCS301A | Network Camera Server - Page 47
    . LAN WAN Tunnel Mode POWDECR IN VIDEO IN AUDIO IN IN Not Encrypted Prepare the following requirements. Encrypted Item PC Router Camera Server Supported Feature Operating System : Windows XP, Windows 2000, Windows Me, Windows 98SE (in IPv4) : Windows XP Service Pack 1 or later (in IPv6
  • Panasonic BB-HCS301A | Network Camera Server - Page 48
    Operating Instructions 2.5 Encrypt the Camera Image in Transport Mode This product can encrypt the image using IPsec transport mode. Note If you use IPsec, refresh interval slows down. 1. Click [IPsec] on the Setup page. 2. Click Camera in the Transport column. • If you use transport mode in E-mail
  • Panasonic BB-HCS301A | Network Camera Server - Page 49
    Instructions the specified people. • Set it as many characters as possible. • Change the password regularly. 4. Click [Save] when finished. • New settings are saved. 5. • Check the box to enable IPsec features. If you clear the box, whole IPsec features will be invalid. Encoding strength • Encoding
  • Panasonic BB-HCS301A | Network Camera Server - Page 50
    In IPsec communications, "IPsec" is displayed on the Top page or the Single Camera page. • If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup CD-ROM. • See the Panasonic support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec features. 50
  • Panasonic BB-HCS301A | Network Camera Server - Page 51
    Operating Instructions 2.6 Encrypt the Camera Image in Tunnel Mode This product can encrypt the image using IPsec tunnel mode. Notes • Do not set IPsec on the PCs under the VPN
  • Panasonic BB-HCS301A | Network Camera Server - Page 52
    Operating Instructions Setting Status Pre-Shared Key Network address Router address Description • Check the password regularly. • Enter the destination network address. • Enter "IP address/Prefix length" in the data field. • Enter the WAN IP address of the VPN router on a destination network. Notes
  • Panasonic BB-HCS301A | Network Camera Server - Page 53
    Operating Instructions Setting Description IPsec • Check the box to enable IPsec features. If you clear the box, whole IPsec features will be invalid. Encoding strength • Encoding available.) Specifies by 28800 s (Byte setting is not supported.) [For assistance, please call: 1-800-272-7033] 53
  • Panasonic BB-HCS301A | Network Camera Server - Page 54
    IPsec communications, "IPsec" is displayed on the Top page or the Single Camera page. • If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup CD-ROM. • See the Panasonic support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec features. 54
  • Panasonic BB-HCS301A | Network Camera Server - Page 55
    . In order to use this feature, your router needs to support this feature and it must be enabled. Most router manufacturers disable this feature as the default setting. See http://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see your router's manual for how to enable UPnPTM. After
  • Panasonic BB-HCS301A | Network Camera Server - Page 56
    Operating Instructions 3. Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. 4. Click [Go to UPnP page]. • The UPnP page is displayed. 56
  • Panasonic BB-HCS301A | Network Camera Server - Page 57
    . See the router manual for how to enable port forwarding. 3. Register with the DynamicDNS service (see page 58). Port Forwarding feature*1 (IPv4 Only) The port forwarding feature is required to allow access from the Internet with a router not supporting UPnPTM. It exchanges a local IP address for
  • Panasonic BB-HCS301A | Network Camera Server - Page 58
    an easy-to-remember name to this product, similar to your favorite web site. DynamicDNS service also allows you to easily access this product, even when your ISP changes the IP address. Panasonic Communications recommends you to register with it for the Internet access to this product. See http
  • Panasonic BB-HCS301A | Network Camera Server - Page 59
    ] on the web browser. 2. Confirm that your network (your PC and this product) is connected to the Internet. • Personal (Camera) URL is available after you registered with the Viewnetcam.com service. • If port forwarding is not enabled or your network is not connected to the Internet, the Viewnetcam
  • Panasonic BB-HCS301A | Network Camera Server - Page 60
    Operating Instructions 7. Register with the Viewnetcam.com service following the website. • Camera URL in the DynamicDNS on the Status page, restart this product. After that, confirm that your registered URL is displayed on their pages. Confirming the Internet access Due to the router specifications
  • Panasonic BB-HCS301A | Network Camera Server - Page 61
    2. Set each parameter. Operating Instructions • Clicking [Cancel] cancels your settings without saving changes. • You can get DynamicDNS information from the DynamicDNS service industry company. Setting DynamicDNS Server URL Updating time User Name Password Description Input URL acquired from
  • Panasonic BB-HCS301A | Network Camera Server - Page 62
    Instructions Confirming the Internet access Due to the router specifications, the image may not be displayed even if you access this product from your PC on the same LAN as this product. In this case, access this product in the following procedures. • Accessing from the PC on another network
  • Panasonic BB-HCS301A | Network Camera Server - Page 63
    Operating Instructions How the DynamicDNS service works DynamicDNS service server DNS server 3. New address registered with DNS server 2. This product reports new address On-site This product ISP POWDECR IN VIDEO IN 4. DNS looks up current address AUDIO IN IN Internet 1. Global IP
  • Panasonic BB-HCS301A | Network Camera Server - Page 64
    Operating Instructions 2.9 Setting Date and Time The Date and Time page allows you to set date and time. Date and time are used for each images (Single, Multi and ] to synchronize the time automatically with an NTP server. • Clicking [Cancel] cancels your settings without saving changes. 64
  • Panasonic BB-HCS301A | Network Camera Server - Page 65
    Instructions Setting Description Time Setting • Select date and format (AM/PM or 24 H). These settings are used for each images (Single (Network Time Protocol) server synchronizes this product's internal clock. It adjusts automatically every day. Check the box to enable it. Set the NTP server IP
  • Panasonic BB-HCS301A | Network Camera Server - Page 66
    Operating Instructions Note Date and time settings become incorrect depending on the length of power-on time or the internal temperature. Using the Automatic Time Adjustment is recommended. 66
  • Panasonic BB-HCS301A | Network Camera Server - Page 67
    Operating Instructions 2.10 Changing Camera Settings The Camera page allows you to set the Camera Name Vertical Resolution and Picture position adjustment. 1. Click [Camera] on the Setup page. 2. Set each parameter. • Clicking [Cancel] cancels your settings without saving changes. [For assistance,
  • Panasonic BB-HCS301A | Network Camera Server - Page 68
    Operating Instructions Setting Description Camera Name • The camera name is displayed on the Single camera page. • Enter ASCII characters (see page (for 640 × 480 mode) When selecting the video of 640 × 480 dot resolution on the Single page, scanning lines may appear to record the fast
  • Panasonic BB-HCS301A | Network Camera Server - Page 69
    Operating Instructions 2.11 Adjusting Audio The Audio page adjusts the audio input sensitivity and audio output volume etc. 1. Click [Audio] on the Setup page. 2. Set each parameter. •
  • Panasonic BB-HCS301A | Network Camera Server - Page 70
    Operating Instructions Setting Output Description • Set the audio to output to this product's Disable: It disables the audio output. Analog Camera Amplifier or Microphone mixer Local Audio Amplifier Speaker Remote Audio Volume 70 Network Microphone • It controls the audio volume to output
  • Panasonic BB-HCS301A | Network Camera Server - Page 71
    Operating Instructions Setting PC Audio Input Timeout Input Sensitivity Description • It the audio sensitivity to input to this product. - Minimum: Decreased sensitivity - Standard: Standard setting (default) - Maximum: Enhanced sensitivity * When [Local Audio + Remote Audio] is selected on the
  • Panasonic BB-HCS301A | Network Camera Server - Page 72
    Operating Instructions Adjusting local audio and remote audio When [Local Audio + Remote Audio] is selected on the Audio page, audio from the audio input terminal (Local Audio)
  • Panasonic BB-HCS301A | Network Camera Server - Page 73
    Operating Instructions 2. Adjust the sensitivity of the local audio. (1) Click [Audio] on the Setup page. (2) Select [Minimum], [Standard] or [Maximum] in the Sensitivity (see page 69). (3) Click [
  • Panasonic BB-HCS301A | Network Camera Server - Page 74
    Operating Instructions 2.12 Changing Authentication Setting and Administrator User Name and Password The Security: Administrator page allows you to change authentication, administrator user name and password. The authentication window is displayed, and allows the registered users to access this
  • Panasonic BB-HCS301A | Network Camera Server - Page 75
    Operating Instructions Setting General Authentication Description Authentication has 2 phases. • If you set [Permit access from guest users], this product does not display the authentication window in camera access. All guest users can view the image without user name and password. Note If you set
  • Panasonic BB-HCS301A | Network Camera Server - Page 76
    Operating Instructions 4. Click [Go to Security: Administrator page]. • The Security: Administrator page is displayed. Note • When the user name and password have been changed, this product displays an authentication window. Enter the user name and password, and click [OK]. Administrator/General
  • Panasonic BB-HCS301A | Network Camera Server - Page 77
    Operating Instructions 2.13 Logging in to this Product If you set [Permit access Note The authentication window is displayed. Enter the user name and password set for General Users or Administrator. 3. Enter a valid user name and password according to the Login mode selected in step 2, and click [
  • Panasonic BB-HCS301A | Network Camera Server - Page 78
    Operating Instructions 2.14 Creating, Modifying or Deleting General Users The General User page allows you to create, modify or delete general users. Up to 50 general users
  • Panasonic BB-HCS301A | Network Camera Server - Page 79
    3. Set each parameter. • Settings for a general user Operating Instructions • Settings for guest users • Clicking [Cancel] takes you back to the previous page without saving changes. Setting User ID List User Name/ Password Description • Up to 50 general users can be registered. • The list is
  • Panasonic BB-HCS301A | Network Camera Server - Page 80
    Operating Instructions Setting Access Level Description Access level is set for each general user. Check the feature to enable. • In the limit time of continuous motion JPEG, set the time to change the video (Motion JPEG) to still images for each user. (Not permitted, Unlimited, 10 seconds-60
  • Panasonic BB-HCS301A | Network Camera Server - Page 81
    Operating Instructions 2.15 Procedures of Buffering or Transferring Images The procedures from this page to page 112 are described about settings of the image buffer or transfer.
  • Panasonic BB-HCS301A | Network Camera Server - Page 82
    Operating Instructions 2.16 Buffering or Transferring Images by Timer The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. Note If you are
  • Panasonic BB-HCS301A | Network Camera Server - Page 83
    Operating Instructions Setting Description Enable Image • Check the box to enable the Trigger setting. Clear the box Buffer/Transfer to disable it. Trigger • Selecting [Timer] enables this
  • Panasonic BB-HCS301A | Network Camera Server - Page 84
    Instructions • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 85
    click [Next>]. Operating Instructions • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 86
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 87
    Operating Instructions Setting Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Login Timing • Upload File • Name*1 Overwrite • Setting Data • Transfer Method Description If you set the FTP server IP address, set 4 digits (0-255) and 3 periods such as "192.168
  • Panasonic BB-HCS301A | Network Camera Server - Page 88
    Operating Instructions When you set [E-mail] for Transfer Method Select [E-mail], and saving changes. Notes • This product works only with an SMTP (Simple Mail Transfer Protocol) server. It does not work with mail servers like "Hotmail®" using a web browser. • The subject name by E-mail transfer uses
  • Panasonic BB-HCS301A | Network Camera Server - Page 89
    Instructions Setting SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E- • mail Address*2 1-3 Subject*2 • Text*2 • Description If you set the SMTP server IP
  • Panasonic BB-HCS301A | Network Camera Server - Page 90
    Operating Instructions 8. Confirm the settings, and click [Save]. • New settings are saved. • When finished, "Success!" is displayed. 9. Click buffered images. - Turning off this product. - Saving the Date and Time page. - Restarting, updating firmware or resetting this product to factory default. 90
  • Panasonic BB-HCS301A | Network Camera Server - Page 91
    Operating Instructions 2.17 Buffering or Transferring Images by Alarm Signal The Trigger memory card, refresh interval slows down. • You need to attach the alarm to this product when using this feature. 1. Click [Trigger] on the Setup page. 2. Click No. to enable buffer/transfer. 3. Check [Enable
  • Panasonic BB-HCS301A | Network Camera Server - Page 92
    Operating Instructions Setting Description Enable Image • Check the box to enable the Trigger setting. Clear the box Buffer/Transfer to disable it. Trigger • Selecting [Timer] enables this
  • Panasonic BB-HCS301A | Network Camera Server - Page 93
    Instructions • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 94
    Operating Instructions • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 95
    click [Next>]. Operating Instructions • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 96
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 97
    Operating Instructions Setting Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Login Timing • Upload File • Name*1 Overwrite • Setting Data • Transfer Method Description If you set the FTP server IP address, set 4 digits (0-255) and 3 periods such as "192.168
  • Panasonic BB-HCS301A | Network Camera Server - Page 98
    Operating Instructions When you set [E-mail] for Transfer Method Select [E-mail], and saving changes. Notes • This product works only with an SMTP (Simple Mail Transfer Protocol) server. It does not work with mail servers like "Hotmail" using a web browser. • The subject name by E-mail transfer uses
  • Panasonic BB-HCS301A | Network Camera Server - Page 99
    Instructions Setting SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E- • mail Address*2 1-3 Subject*2 • Text*2 • Description If you set the SMTP server IP
  • Panasonic BB-HCS301A | Network Camera Server - Page 100
    Operating Instructions 8. After you confirm the settings and click [Next>], set E-mail notification and click [Next>]. • If you select [Enable], the E-mail Notification When Triggered page is
  • Panasonic BB-HCS301A | Network Camera Server - Page 101
    Operating Instructions 10. Click [Go to Trigger page]. • The Trigger page is displayed. Notes • If you set . - Turning off this product. - Saving the Date and Time page. - Restarting, updating firmware or resetting this product to factory default. [For assistance, please call: 1-800-272-7033] 101
  • Panasonic BB-HCS301A | Network Camera Server - Page 102
    Operating Instructions 2.18 Buffering or Transferring Images by Motion Detection Signal The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. Notes • A change
  • Panasonic BB-HCS301A | Network Camera Server - Page 103
    Operating Instructions Setting Description Enable Image • Check the box to enable the Trigger setting. Clear the box Buffer/Transfer to disable it. Trigger • Selecting [Timer] enables this
  • Panasonic BB-HCS301A | Network Camera Server - Page 104
    Operating Instructions 5. Set the image settings, and click [Next>]. • Clicking [> • Select the image quality. [Favor Clarity] optimizes for good quality. [Standard] offers standard quality. (Default) [Favor Motion] optimizes for enhanced motion. [Mobile Phone] is for a transfer to a cell phone.
  • Panasonic BB-HCS301A | Network Camera Server - Page 105
    6. Set the image buffer frequencies, and click [Next>]. Operating Instructions Note Due to the network environment, object, number of accesses, enabling IPsec, this product may not record the numbers of images as you set. In this case, set the image
  • Panasonic BB-HCS301A | Network Camera Server - Page 106
    Instructions 7. Select the transfer method, and click [Next>]. • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 107
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic BB-HCS301A | Network Camera Server - Page 108
    Operating Instructions Setting Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Login Timing • Upload File • Name*1 Overwrite • Setting Data • Transfer Method Description If you set the FTP server IP address, set 4 digits (0-255) and 3 periods such as "192.168
  • Panasonic BB-HCS301A | Network Camera Server - Page 109
    Operating Instructions When you set [E-mail] for Transfer Method Select [E-mail], and saving changes. Notes • This product works only with an SMTP (Simple Mail Transfer Protocol) server. It does not work with mail servers like "Hotmail" using a web browser. • The subject name by E-mail transfer uses
  • Panasonic BB-HCS301A | Network Camera Server - Page 110
    Instructions Setting SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E- • mail Address*2 1-3 Subject*2 • Text*2 • Description If you set the SMTP server IP
  • Panasonic BB-HCS301A | Network Camera Server - Page 111
    Operating Instructions 8. After you confirm the settings and click [Next>], set E-mail notification and click [Next>]. • If you select [Enable], the E-mail Notification When Triggered page is
  • Panasonic BB-HCS301A | Network Camera Server - Page 112
    Operating Instructions 10. Click [Go to Trigger page]. • The Trigger page is displayed. Notes • If you set a short interval to delete all buffered images. - Turning off this product. - Saving the Date and Time page. - Restarting, updating firmware or resetting this product to factory default. 112
  • Panasonic BB-HCS301A | Network Camera Server - Page 113
    Operating Instructions 2.19 Formatting the SD memory card You can record camera images to the SD memory card (customer-provided). Before you record the camera image, you need to format the SD memory card. Note • You can confirm the SD memory capacity on the Status page (see page 133). 1. Insert
  • Panasonic BB-HCS301A | Network Camera Server - Page 114
    Operating Instructions 2.20 Stopping the SD Memory ), the SD memory recording starts again. 1. Click [Trigger] on the Setup page. 2. Click [SD video recording stop]. 3. Click [OK] on the confirmation window. • The SD memory recording is stopped. 4. capacity, data corruption or camera malfunction. 114
  • Panasonic BB-HCS301A | Network Camera Server - Page 115
    Operating Instructions 2.21 Starting the again. 1. Click [Trigger] on the Setup page. 2. Click [SD video recording start]. • "SD video recording was started." is displayed. 3. Click [Go to Trigger page]. • , data corruption or camera malfunction. [For assistance, please call: 1-800-272-7033] 115
  • Panasonic BB-HCS301A | Network Camera Server - Page 116
    or FTP. POWDECR IN VIDEO IN AUDIO IN IN E-mail or FTP Server Transport Mode Encrypted Prepare the following requirements. Item E-mail or FTP Server Operating System ISP Service Camera Server ISP Service Supported Feature : IPsec supported : Services for multiple static global addresses
  • Panasonic BB-HCS301A | Network Camera Server - Page 117
    LAN WAN Tunnel Mode POWDECR IN VIDEO IN AUDIO IN IN Not Encrypted Prepare the following requirements. Encrypted Item VPN Router Camera Server ISP Service (in IPv4) ISP Service (in IPv6) ISP Service (in IPv4) ISP Service (in IPv6) Supported Feature : Services for static global addresses
  • Panasonic BB-HCS301A | Network Camera Server - Page 118
    Operating Instructions 2.24 Setting the Motion Detection The Motion Detection page allows you to adjust sensitivity of the Motion Detection. Threshold: If the threshold is set low,
  • Panasonic BB-HCS301A | Network Camera Server - Page 119
    Operating Instructions Preview The preview window displays current threshold and detection level. • assume no responsibility whatsoever for any damages resulting from the use of the motion detection feature. We do not recommend the use of the motion detection function for supervisional purposes
  • Panasonic BB-HCS301A | Network Camera Server - Page 120
    feature is designed to alleviate false detections due to overall brightness changes caused by sunlight. But in this case, this product may falsely detect the rapid brightness changes by the artificial light such as the fluorescent light. In other cases, motion detection of Panasonic Network Camera
  • Panasonic BB-HCS301A | Network Camera Server - Page 121
    Operating Instructions 2.25 Notifying Setup of an Alarm Log Once a day, an alarm log sent at a specified time can be checked. To enable Alarm Log, set Alarm
  • Panasonic BB-HCS301A | Network Camera Server - Page 122
    Operating Instructions Setting A setup of operation • Time • SMTP Server IP • Address or Host Name*1 • Port No. • POP3 Server IP • Address or Host Name*1 • Port No. • Login ID*2 • Password*2 • Reply E-mail • Address*2 Destination E-mail • Address 1-3*2 Subject*2 • Description
  • Panasonic BB-HCS301A | Network Camera Server - Page 123
    Operating Instructions 2.26 Changing Initial Settings on the Single Camera page or the Multi-Camera page The Image Display page allows you to change initial settings (display settings when a user accesses this product) of image resolution, image quality and refresh
  • Panasonic BB-HCS301A | Network Camera Server - Page 124
    product or announcements about the latest firmware, etc. from Panasonic. Checking [Display] for Administrator is particularly recommended. • When checked, the banner is displayed for administrator or general users or both. • The banner is displayed only on the Single Camera page (see page 16). 124
  • Panasonic BB-HCS301A | Network Camera Server - Page 125
    3. Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. 4. Click [Go to Image Display page]. • The Image Display page is displayed. Operating Instructions [For assistance, please call: 1-800-272-7033] 125
  • Panasonic BB-HCS301A | Network Camera Server - Page 126
    Instructions 2.27 Configuring Multiple Images To view images on the Multi-Camera page, this product's or the Panasonic Network Camera's IP address and camera name must be configured on the Multi-Camera Setup page. These configurations are required to use the Multi-Camera page. Up to 12 cameras
  • Panasonic BB-HCS301A | Network Camera Server - Page 127
    Instructions Setting Display • IP Address*1 or • Host Name*2 Port No. • Camera Name*3 • Description Check the box to enable the image display. Set the IP address or the host name to enable the image display. Set the port number (1-65535). The name is displayed only on the Multi-Camera
  • Panasonic BB-HCS301A | Network Camera Server - Page 128
    Operating Instructions 2.28 Specifying Operation Time The Operation Time page allows you to limit the operation time. The image turns to a gray screen outside the operation time. Notes • If you wrongly set the time period, your privacy may be seen. Confirm the time period after the setup. •
  • Panasonic BB-HCS301A | Network Camera Server - Page 129
    Operating Instructions Setting Enable • A day of the • week Operation Time • Description Check the box to enable the setting. Clear the box to disable it. Check the box
  • Panasonic BB-HCS301A | Network Camera Server - Page 130
    Operating Instructions 2.29 Controlling External Output Terminal The digital output terminal allows you to control the external devices. You can change the initial status of the output
  • Panasonic BB-HCS301A | Network Camera Server - Page 131
    Operating Instructions 2.30 Changing Indicator Display The Indicator Control page allows you to select Indicator operation. Indicator has three options. • Always on • Turn the indicator on when
  • Panasonic BB-HCS301A | Network Camera Server - Page 132
    Operating Instructions 3 Maintenance 3.1 Maintenance page (1) (2) (3) (4) (5) (6) (7) (8) Maintenance (1) Status Displays the 134). (4) Restart Restarts this product (see page 134). (5) Update Firmware Updates the firmware (see page 135). (6) Save Settings Creates a configuration file (see
  • Panasonic BB-HCS301A | Network Camera Server - Page 133
    Operating Instructions 3.1.1 Confirming the Status The Status page allows you to check the status of this product. The status information provides support for troubleshooting. Clicking [Status] displays the following page. Note See the Panasonic support website at http://panasonic.co.jp/pcc/products
  • Panasonic BB-HCS301A | Network Camera Server - Page 134
    Operating Instructions 3.1.3 Displaying Alarm Logs Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new one. 1. Click [Alarm Log] on
  • Panasonic BB-HCS301A | Network Camera Server - Page 135
    images and alarm logs on the internal memory will be deleted after the firmware update. The buffered images on the SD memory card are not deleted. 1. Download the new firmware on the Panasonic support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/, and save it on your PC. 2. Click
  • Panasonic BB-HCS301A | Network Camera Server - Page 136
    Operating Instructions • The Update page is displayed in about 1 minute. 4. Click [Browse...]. • A dialog box is displayed to select the firmware. 5. Select the firmware (including directory information) and click [Open]. • The firmware file name is displayed. 6. Confirm the firmware file name, and
  • Panasonic BB-HCS301A | Network Camera Server - Page 137
    Operating Instructions 7. Confirm that the version number on the Top page is updated. Updated version • If the version number is updated, the firmware update is complete. [For assistance, please call: 1-800-272-7033] 137
  • Panasonic BB-HCS301A | Network Camera Server - Page 138
    Instructions page. 2. Click [Save]. 3. Click [Save] on the File Download dialog box. 4. Specify the location, and click [Save] on the this product, create a configuration file after updating the firmware. If there is a firmware version difference between the product that you create a configuration
  • Panasonic BB-HCS301A | Network Camera Server - Page 139
    Operating Instructions 3.1.7 Loading Settings from a Configuration File The settings can be loaded from a configuration file. If you reset this product to factory default, this product can load its settings from the configuration file. Notes • The configuration file has network settings. When the
  • Panasonic BB-HCS301A | Network Camera Server - Page 140
    orange, and then turns off for 10 seconds. • All settings (user name, password, IP address, subnet mask etc.) are reset to factory default. • If this product is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure this product seeing the Getting Started
  • Panasonic BB-HCS301A | Network Camera Server - Page 141
    Help page The Help page displays explanations for each feature about the following 1. to 6. items. Clicking [Help] on the Support page displays the next page. 3.2.2 Seeing Product Information You can see product information on the Panasonic support website. Clicking [Product Information] on the
  • Panasonic BB-HCS301A | Network Camera Server - Page 142
    Operating Instructions 3.2.3 Seeing Support Information You can see support information on the Panasonic support website. Clicking [Support Information] on the Support page displays the URL, click it. Note If this product is not connected to the Internet, the website cannot be displayed. 142
  • Panasonic BB-HCS301A | Network Camera Server - Page 143
    Operating Instructions 3.3 External I/O If you connect the external devices such as sensors to the External I/O and image buffer/transfer by alarm signal is set, the image is transferred by the alarm detection. Explanation of the External I/O Pin Features G GND pin 1 External Sensor Input •
  • Panasonic BB-HCS301A | Network Camera Server - Page 144
    Operating Instructions Circuit Diagram Example Relay 12 V 3 2 Door Sensor 1 G Light DC10.5 V-13.5 V CAUTION • The external I/O is not capable of connecting directly to devices that require large amounts
  • Panasonic BB-HCS301A | Network Camera Server - Page 145
    Instructions 3.4 FACTORY DEFAULT RESET Button This product has a FACTORY DEFAULT RESET button in front. FACTORY DEFAULT RESET Button (Press the button with a pointed object.) Pressing the FACTORY DEFAULT RESET button resets this product to factory default. If you lose your user name and password
  • Panasonic BB-HCS301A | Network Camera Server - Page 146
    Operating Instructions 3.5 Default Setting List Basic Items Default Required Note Network Connection Mode (IPv4) Automatic Setup - Automatic Setup/ Static/DHCP Allow Access from the No - - Internet (Automatic Setup only) Network Configuration Enable - - from Setup Program (
  • Panasonic BB-HCS301A | Network Camera Server - Page 147
    Operating Instructions Items Default Required Note Network Connection Mode (IPv6) Automatic Setup - Automatic Setup/ Static Allow Access from the No - - Internet (Automatic Setup only) Port No. (Static only) 80 - 20, 21, 25 or 110 is not available.*2 IP address (Static only) [
  • Panasonic BB-HCS301A | Network Camera Server - Page 148
    Operating Instructions Items Default Required Note Date and Date Time Format AM/PM - Not initialized - - First Sunday, 2 AM End Day Oct, - - Last Sunday, 2 AM Camera Camera Name Network Camera Required 1-15 characters *6 Vertical Resolution (for 640 × 480 mode) 480 (Better for
  • Panasonic BB-HCS301A | Network Camera Server - Page 149
    Operating Instructions Items Default Required Note Security: General Do not permit - - Administrator Authentication access from guest users User Name [Blank] When setting 6-15 characters administrator *3 Password [Blank] When setting 6-15 characters administrator *3 Retype Password
  • Panasonic BB-HCS301A | Network Camera Server - Page 150
    Operating Instructions Buffer/Transfer Trigger Items Status Trigger Active Time of Trigger Image Setting (Image Resolution) Image Quality Default Off Timer Always 320 × 240 Standard Image Buffer Frequency Transfer Method Notify Motion Threshold Detection Sensitivity Every 1 s, buffer 1 image.
  • Panasonic BB-HCS301A | Network Camera Server - Page 151
    Alarm Log Operating Instructions Items A setup of operation Active Time Time Notice setup of an alarm log Port No. (SMTP) Port No. (POP) Subject Default Disable Checked PM 12h 0min [Blank] Required When selecting Alarm or Motion Detection in Trigger. Note Disable/ Enable(When there is no
  • Panasonic BB-HCS301A | Network Camera Server - Page 152
    Operating Instructions Advanced Image Display Items Single Camera Image Resolution Single Camera Image Quality Default 320 × 240 Standard Single Camera Refresh Interval Multi-Camera Image Resolution Multi-Camera Image Quality Motion 320 × 240 Standard Multi-Camera Refresh Interval Motion
  • Panasonic BB-HCS301A | Network Camera Server - Page 153
    Operating Instructions MultiCamera Items Multi-Camera Display IP Address or Host Name Port No. Camera Name Operation Operation Time Time External External Device Output Control Output Button name modification Indicator Indicator Control Control Default [Blank] Checked [Blank] [Blank] [Blank]
  • Panasonic BB-HCS301A | Network Camera Server - Page 154
    Instructions 3.6 Setting an IP Address on Your PC Your PC's IP address can be assigned by the following procedures. 1. Display the TCP/IP IP Address Local IP address is the network ID that is not used on the Internet. They are classified into Class A, Class B and Class C, as shown below. Set the IP
  • Panasonic BB-HCS301A | Network Camera Server - Page 155
    3.7 Using Setup Program Operating Instructions Setup Program can set up this product or Panasonic Network Camera. In the explanation in this section, this product's setup is described. The Setup Program can be used for the following purposes. • Finding the IP address and port number of this
  • Panasonic BB-HCS301A | Network Camera Server - Page 156
    Operating Instructions • When the following dialog box is displayed, click [Unblock]. • You can find the IP address and port number by looking up the MAC address of this product. IPv4 Information MAC Address Port IP No. Address Status IPv6 Information List window Displays IPv4 or IPv6
  • Panasonic BB-HCS301A | Network Camera Server - Page 157
    the program. Sets up this product to view on the LAN. Sets up the Internet access to this product. Manually sets up this product. Disables IPsec. If disabled, the button is displayed gray. Displays the Setup page (see page 34). Note See the Getting Started for the local and Internet access setup
  • Panasonic BB-HCS301A | Network Camera Server - Page 158
    Operating Instructions Manual Setup window Set up each parameter seeing page 39-page 40. • If more than 20 minutes have passed since this product was turned on, this product cannot be set up from the Setup Program. If this product cannot be set up, restart this product. • If "Camera setup completed"
  • Panasonic BB-HCS301A | Network Camera Server - Page 159
    may prevent access to this product. Consult your network administrator. Notes • A proxy server is used to protect your network connected to the Internet. • If this product is accessed via a proxy server, problems may occur. Consult your network administrator before installing this product. • If this
  • Panasonic BB-HCS301A | Network Camera Server - Page 160
    Operating Instructions 3. Click the [Connections] tab, and click [LAN Settings]. 4. See if the Use a proxy server check box is checked or not. If checked, click [Advanced...]. See if the check box is checked or not. If checked, click [Advanced...]. • If not
  • Panasonic BB-HCS301A | Network Camera Server - Page 161
    Operating Instructions 5. Enter the IP address into the Do not use proxy server for addresses beginning with data field. (Example: 192.168.0.253) 6. Click [OK]. Note When accessing this product via a proxy server, the Talk Button is displayed gray. Talk feature cannot be used. [For assistance,
  • Panasonic BB-HCS301A | Network Camera Server - Page 162
    [Control Panel] [Programs] [Windows Components] Select [Network Service] [Properties] Check [UPnP] [OK] [Next] Complete Windows XP Service Pack 2 [Start] ( [Settings]) [Control Panel] [Programs] [Windows Components] Select [Networking Service] [Details] Check [Internet Gateway Device Discovery and
  • Panasonic BB-HCS301A | Network Camera Server - Page 163
    ASCII Character Table 0 @ P ` 1 A Q a 2 B R b 3 C S c 4 D T d 5 6 E F U V e f 7 G W g 8 H X h 9 I Y i : J Z j ; K [ k < L \ l = M ] m > N ^ n ? O _ o Operating Instructions p q r s t u v w x y z { | } ~ [For assistance, please call: 1-800
  • Panasonic BB-HCS301A | Network Camera Server - Page 164
    Operating Instructions 3.10 File Size and Number of Buffered Images The following table shows the relationship between the file size of the image and the maximum number
  • Panasonic BB-HCS301A | Network Camera Server - Page 165
    provided) enables this product to store images and replay them. Follow the instructions below to insert the SD memory card into this product. How to straight towards you. • EnsureVIDEO that recording has been stopped, before VIDEO removing the card (see page 114).AUDIIOf the SD memory card is
  • Panasonic BB-HCS301A | Network Camera Server - Page 166
    Operating Instructions 3.12 Number of Images on the SD Memory Card This product supports the Panasonic SD memory card. • 1 GB: RP-SDH01GU1A • 512 MB: RP-SDH512U1A • 256 MB: RP-SD256U1A • 128 MB: RP-SD128BU1A • 64 MB: RP-SD064BPPA Resolution/ Image Quality 1
  • Panasonic BB-HCS301A | Network Camera Server - Page 167
    Operating Instructions 3.13 Specifications Other Specifications Items Video Compression Video Resolution Buffered Image*1 Video Input Video Output Audio Communication Audio Bandwidth Audio Play Method Input Encoding Method Audio Input Audio Output*2 Frame rate*3 Supported Protocols IPsec Feature
  • Panasonic BB-HCS301A | Network Camera Server - Page 168
    Instructions Other Specifications Items Message-Digest Algorithm Image Transfer Condition Image Transfer Method Interface Indicator Display External I/O Dimension (HWD) Weight Power Supply Temperature Humidity Specifications on the network environment, the PC performance, the image quality, enabling
  • Panasonic BB-HCS301A | Network Camera Server - Page 169
    Index Operating Instructions 169
  • Panasonic BB-HCS301A | Network Camera Server - Page 170
    128 P Product Information page 141 R Reset to Factory Default page 140 Restart page 134 S Save Settings page 138 SD memory card 113 Security: Administrator page 74 Session Status 133 Setup page 34 Setup Program 155 Single Camera page 16 Specifications 167 Status page 133 Support Information page 142
  • Panasonic BB-HCS301A | Network Camera Server - Page 171
    Support page 141 T Talk 25 Timer Image Buffer/Transfer 82 Top page 12 Trademarks 6 Transport mode 48, 116 Tunnel mode 51, 117 U Update Firmware page 135 UPnP page 55 V Viewnetcam.com 58 Operating Instructions 171
  • Panasonic BB-HCS301A | Network Camera Server - Page 172
    For product service Panasonic Servicenters are listed in the servicenter directory. Call 1-800-272-7033 for the location of an authorized servicenter. This Network Camera Server is designed for use in the United States of America. Sale or use of this product in other countries/areas may violate
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
Operating Instructions
Please read this manual before using and save this manual for future reference.
Network Camera Server
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
Model No.
BB-HCS301A