Panasonic BL-C1CE Ip Camera

Panasonic BL-C1CE Manual

Get Panasonic BL-C1CE PDF manuals and user guides View all Panasonic BL-C1CE manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic BL-C1CE manual content summary:

  • Panasonic BL-C1CE | Ip Camera - Page 1
    Operating Instructions BL-C1A Network Camera Indoor Use Only Model No. BL-C1A Wired Type BL-C20A BL-C20A Wireless/Wired Type Please read this manual before using, and save this manual for future reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam for customers in the
  • Panasonic BL-C1CE | Ip Camera - Page 2
    Instructions Main Features [For BL-C20A] Wireless Communication This Network Camera is compatible with a wireless system based on IEEE 802.11b/g. Wireless installation is playing an ever increasing role in flexible communication. The use of encryption ensures security on this kind of network
  • Panasonic BL-C1CE | Ip Camera - Page 3
    Operating Instructions Documentation This manual is for both BL-C1A (Wired Type) and BL-C20A (Wireless/Wired Type). Available features and operations are different in part depending on the model. Read this manual carefully and use the Network Camera properly. (The model no. is indicated on the upper
  • Panasonic BL-C1CE | Ip Camera - Page 4
    Setting Setup Finished setting Green blinking Green Using DHCP Getting IP address*3 Got IP address Orange blinking Green blinking Green Updating Firmware Orange blinking FACTORY DEFAULT RESET button pressed Orange blinking Turning off (about 5 seconds) The status when turned on (The camera
  • Panasonic BL-C1CE | Ip Camera - Page 5
    BL-C1A Rear View Stand/Tripod Mounting Hole (See Getting Started.) Serial number MAC Address (See Getting Started.) Ethernet (LAN) port (See Getting Started.) Hook for AC adaptor cord Operating Instructions DC IN jack (See Getting Started.) FACTORY DEFAULT RESET Button [For assistance, please call
  • Panasonic BL-C1CE | Ip Camera - Page 6
    Instructions BL-C20A Front View Antenna FACTORY DEFAULT RESET Button Indicator The indicator color shows camera status. Lens (0.3 m [about 11 13/16 inches]-Unlimited) Note See page 4 for the indicator operations. BL-C20A Rear View Stand/Tripod Mounting Hole (See Getting Started.) Switch (WIRED
  • Panasonic BL-C1CE | Ip Camera - Page 7
    Features 28 2.1 Setup Page of the Camera 28 2.2 Connecting the Camera to Your Network 31 2.3 [For BL-C20A] Using Wireless LAN 36 2.4 2.4.1 2.4.2 2.5 2.5.1 2.6 Using UPnP™ (Universal Plug and Play 39 Connecting the Camera to a Router that Supports UPnP 40 Connecting the Camera to a Router
  • Panasonic BL-C1CE | Ip Camera - Page 8
    98 Confirming Sensor Logs 99 Restarting the Camera 99 Updating the Camera Firmware 100 Creating a Configuration File 103 Loading Settings from a Configuration File 104 Resetting the Camera to Factory Default 105 Support page 106 The Help page 106 [For BL-C20A] The Wireless Help page 107
  • Panasonic BL-C1CE | Ip Camera - Page 9
    Operating Instructions 7.5.2 7.5.3 7.6 7.7 7.8 Setting UPnP™ to Display Camera Shortcut in My Network Places..... 130 Setting the Internet Temporary File Setting on the Web Browser.......... 130 ASCII Character Table 131 File Size and Number of Buffered Images 132 Specifications 135 Index 138
  • Panasonic BL-C1CE | Ip Camera - Page 10
    address. See page 33 for details about the port number. • If the camera image is not displayed, see page 9 and page 10 of the Troubleshooting on the CD-ROM. E.g. http://192.168.0.253:50000 http:// .viewnetcam.com:50000 3. The Enter Network Password window is displayed. Enter the user name and
  • Panasonic BL-C1CE | Ip Camera - Page 11
    E F G Operating Instructions Select a language. Version Number A To Single Camera page (page 12) C To Buffered Image page (page 22) E To Maintenance page (page 97) G To log in to the camera (page 56) B To Multi-Camera page (page 20) D To Setup page (page 28) F To Support page (page 106) Note
  • Panasonic BL-C1CE | Ip Camera - Page 12
    to [Motion] by default. The setting can be changed on the operation bar (see page 19). • The refresh interval may change depending on the network condition, PC performance, what object you view and the number of simultaneous users. • When displaying video (Motion JPEG), the camera allows up to 20
  • Panasonic BL-C1CE | Ip Camera - Page 13
    browser when the communication is disconnected. • If ActiveX® Controls (see page 14 or page 15) cannot be installed, download them from the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ Error messages and screen color When general or guest users access
  • Panasonic BL-C1CE | Ip Camera - Page 14
    Motion JPEG) viewing. If you cannot install ActiveX Controls or you cannot see the video (Motion JPEG) using Internet Explorer • In Internet Explorer, click [Tools]→[Internet Options]→[Security] tab and click [Custom level]. (1) Check "Prompt" in "Download signed ActiveX Controls". (2) Check "Enable
  • Panasonic BL-C1CE | Ip Camera - Page 15
    Operating Instructions Security Warning window on Microsoft Windows XP Service Pack 2 To view a video (Motion JPEG), ActiveX Controls must be installed. Follow the steps shown below to install ActiveX Controls. 1. Click the warning displayed above the tabs, and click [Install ActiveX Control...]. 2.
  • Panasonic BL-C1CE | Ip Camera - Page 16
    Operating Instructions 1.2.1 Displaying the Banner An image and its linked website can be Link. The Banner Display is not enabled as the default. 1.2.2 Auto Centering the Image (Click to Center) Using your mouse, click any portion of the camera image when using the digital zoom. The image will
  • Panasonic BL-C1CE | Ip Camera - Page 17
    Operating Instructions 1.2.3 Zooming In and Out This Camera has 10× digital zoom feature that uses ActiveX Controls. The digital zoom feature can be used while playing video (Motion JPEG) on the Single Camera, Multi-Camera and Buffered Image pages. The digital zoom feature can be operated by
  • Panasonic BL-C1CE | Ip Camera - Page 18
    Operating Instructions 1.2.4 Capturing a Still Image Still images can be saved on your PC. 1. Select an image resolution to display an image. 2. Click the Capture image button. Capture Image Button • The camera image opens in another window. 3. Right-click the image, and select [Save Picture As...].
  • Panasonic BL-C1CE | Ip Camera - Page 19
    Operating Instructions Brightness: Adjusts image brightness in nine steps including [STD] (Standard). Clicking [-] or [+] darkens or brightens the image respectively. Refresh Interval: Sets a refresh interval. (Motion-60-second interval) Resolution: Selects [640 × 480] or [320 × 240] (default
  • Panasonic BL-C1CE | Ip Camera - Page 20
    Operating Instructions 1.3 Viewing the Multi-Camera page To view multiple cameras on the Multi-Camera page, you need to configure each camera on the Multi-Camera Setup page (see page 92). 1. Access the camera (see page 10). • The Top page is displayed. 2. Click the [Multi] tab at the top of the page
  • Panasonic BL-C1CE | Ip Camera - Page 21
    address is specified correctly for each camera and that each camera is connected to the Internet. For Internet access, local IP addresses (192.168. . ) cannot be used. (See page 11 of Troubleshooting on the CD-ROM) • Confirm the settings on the Multi-Camera Setup page (see page 92). • Confirm
  • Panasonic BL-C1CE | Ip Camera - Page 22
    Operating Instructions 1.4 Viewing the Buffered Image page To buffer images in the camera's internal memory, you need to set up the image transfer settings (see page 60 or page 70). Buffered images can be viewed on this Buffered Image page. 1. Access the camera (see page 10). • The Top page is
  • Panasonic BL-C1CE | Ip Camera - Page 23
    clicking buttons below. Operating Instructions The date and time images the camera is buffering. At 320 × 240 pixels resolution and standard quality, the camera can digital zoom can be used while viewing buffered images (while playing video [Motion JPEG]). • The Click to Center feature can be used
  • Panasonic BL-C1CE | Ip Camera - Page 24
    Operating Instructions 1.4.1 Deleting Buffered Images If you intend to delete images for each delete all buffered images. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. - Changing the Enable/Disable settings on
  • Panasonic BL-C1CE | Ip Camera - Page 25
    .com:50000/mobile) • Allow access from the Internet to access the camera from cell phones. • When an authentication window is displayed, enter the administrator's or general user's user name and password. • A still image is displayed. (Video [Motion JPEG] cannot be displayed.) An administrator
  • Panasonic BL-C1CE | Ip Camera - Page 26
    :// IP address(or URL):Port Number/MobileX for XHTML. (or .viewnetcam.com:50000/MobileX) • Some cell phones are not compatible with Panasonic Network Cameras. Some phones may allow viewing only on port 80, and some may not support password authentication. See the Panasonic Network Camera support
  • Panasonic BL-C1CE | Ip Camera - Page 27
    Operating Instructions 1.5.1 Enabling or Disabling the Buffer/Transfer on Your Cell Phone 1. Access camera images from your cell phone, and log in as an administrator (see page 25). 2. Select [Buffer/Transfer]. 3. Select a trigger number that you want to enable
  • Panasonic BL-C1CE | Ip Camera - Page 28
    Operating Instructions 2 Using the Camera's Basic Features 2.1 Setup Page of the Camera 1. Access the camera (see page 10). • The Top page is displayed. Note • When [Permit access from guest users] is set on the Security: Administrator page, click the [Login] tab (see page 56) and log in as an
  • Panasonic BL-C1CE | Ip Camera - Page 29
    Operating Instructions Basic (1) Network Configures network settings to connect the camera to the network (see page 31). (2) [For BL-C20A] Configure a wireless network (see page 36). Wireless (3) UPnP Enables automatic port forwarding and creates a shortcut to the camera (see page 39). (4)
  • Panasonic BL-C1CE | Ip Camera - Page 30
    Instructions Advanced (12) Image Display Sets the resolution, image quality and refresh interval of the Single Camera and Multi-Camera page, Limit Continuous Motion JPEG setting*1, language and banner display (see page 89). (13) Multi-Camera*1 Sets the camera IP address or host name, and camera
  • Panasonic BL-C1CE | Ip Camera - Page 31
    Setup The camera automatically obtains the network settings (subnet mask, default gateway and DNS server address) using the router's DHCP feature. The camera also automatically searches for an unused IP address on your network. If you select [Yes] for Allow Access from the Internet, the camera
  • Panasonic BL-C1CE | Ip Camera - Page 32
    section (see page 98). 5. Click [Restart]. • The camera restarts, and the Top page is displayed. • When the camera is restarted, all buffered images in the internal memory are deleted. • Checking [Yes] for [Allow Access from the Internet] on [Automatic Setup] may not display the Top page, because
  • Panasonic BL-C1CE | Ip Camera - Page 33
    Operating Instructions Note If you do not know the camera IP address when setting [Automatic Setup] or [DHCP Setup], it can be searched for by using the Setup Program (see page 120). Setting Allow Access from • the Internet (Automatic Setup Only) Network • Configuration from Setup Program (
  • Panasonic BL-C1CE | Ip Camera - Page 34
    following situations: - Transferring camera images by E-mail or FTP - Setting cameras by their host names on the MultiCamera Setup page - Using the DynamicDNS service - Using the sensor log notification If you have been assigned a DNS server addresses by your ISP or network administrator, enter them
  • Panasonic BL-C1CE | Ip Camera - Page 35
    Operating Instructions Setting Connection Type Description • Select [Auto Negotiation] normally. For wireless connection (BL-C20A only), [Auto Negotiation] must be selected. If the camera cannot be accessed, see page 9 of Troubleshooting on the CD-ROM. *1 If the IP address is automatically
  • Panasonic BL-C1CE | Ip Camera - Page 36
    Instructions 2.3 [For BL-C20A] Using Wireless LAN Wireless communication is possible by adjusting the settings of the wireless LAN to those of the wireless router. Take a note of the settings and save them for reference. For more information about wireless settings, please refer to http:// panasonic
  • Panasonic BL-C1CE | Ip Camera - Page 37
    3. Set each parameter for Encryption. Operating Instructions Setting Cipher WEPKey Selection WEPKey1-4 Description • Select to encrypt or not encrypt. • To prevent unauthorized users from reading data, selecting [WEP] is recommended. • The checked
  • Panasonic BL-C1CE | Ip Camera - Page 38
    . To communicate using wireless connection, set up the camera using wired connection and flip the switch from WIRED to WIRELESS as shown below. Even if the camera is set to wired connection, it emits electrical waves for about 5 minutes after the power has been on. During this time, the router
  • Panasonic BL-C1CE | Ip Camera - Page 39
    router to make it accessible from the Internet. In order to use this feature, your router needs to support UPnPTM, and it must be enabled. UPnPTM is disabled on most routers by default. See http:// panasonic.co.jp/pcc/products/en/netwkcam/ and your router's manual for details of how to enable UPnPTM
  • Panasonic BL-C1CE | Ip Camera - Page 40
    the Internet with a router supporting UPnPTM, follow the procedures shown in Getting Started. Note • • On some routers, the UPnPTM feature is disabled by default. Enable your router's UPnPTM feature following the router manual before you set up the camera. See the Panasonic Network Camera support
  • Panasonic BL-C1CE | Ip Camera - Page 41
    Operating Instructions 2.4.2 Connecting the Camera to a Router that does not Support UPnP™ To allow access from the Internet with a router that does not support UPnPTM, follow the procedures below. 1. Select [Static] on the Network page. (1) Access the camera (see page 10). (2) Click the [Setup] tab
  • Panasonic BL-C1CE | Ip Camera - Page 42
    , even when your ISP changes the IP address. Panasonic Communications recommends that you register with a DynamicDNS to access the camera from the Internet. See http://www.viewnetcam.com for details about the Viewnetcam.com service. 1. Click [DynamicDNS] on the Setup page. • When you select [Disable
  • Panasonic BL-C1CE | Ip Camera - Page 43
    Internet. • Personal (Camera) URL is available after registering with the Viewnetcam.com service. • If port forwarding is not enabled or your network is not connected to the Internet, the Viewnetcam.com service is not available. 7. Register with the Viewnetcam.com service following the instructions
  • Panasonic BL-C1CE | Ip Camera - Page 44
    URL is displayed on the pages. Confirming Internet access Due to the router's specifications, the image may not be displayed even if you access the camera from your PC on the same LAN as the camera. In this case, try: • Accessing from a PC on another network (see page 10) • Accessing from your cell
  • Panasonic BL-C1CE | Ip Camera - Page 45
    3. Set each parameter. Operating Instructions • Clicking [Cancel] cancels your settings without saving changes. • DynamicDNS information can be obtained from companies in the DynamicDNS service industry. Setting DynamicDNS Server URL*1 Updating time User Name*2 Password*2 Description Input URL
  • Panasonic BL-C1CE | Ip Camera - Page 46
    ") that can be used to view images from your camera over the Internet. What are the advantages of DynamicDNS service? In order to view camera images over the Internet, you need to know your camera's global IP address. However, many Internet Service Providers (ISPs) assign their customers a "dynamic
  • Panasonic BL-C1CE | Ip Camera - Page 47
    Operating Instructions How the DynamicDNS service works DynamicDNS service server DNS server 3. New address registered with DNS server 4. DNS looks up current address Internet 2. Camera reports new address On-site Network ISP Camera 1. Global IP address changes Off-site PC 5. Camera
  • Panasonic BL-C1CE | Ip Camera - Page 48
    Operating Instructions 2.6 Setting the Date and Time The Date and Time page allows date and time deletes all buffered images on the internal memory. 1. Click [Date and Time] on the Setup page. 2. Set each parameter. • Set [Automatic Time Adjustment] to synchronize the time automatically with an NTP
  • Panasonic BL-C1CE | Ip Camera - Page 49
    Instructions or FTP transfer can only be 24 h. Automatic Time • Adjustment • • NTP (Network Time Protocol) server synchronizes the camera's internal clock automatically every day. Check the box to enable it. Set the NTP server IP
  • Panasonic BL-C1CE | Ip Camera - Page 50
    Operating Instructions 2.7 Changing Camera Settings The Camera page allows you to set the camera name, white balance, AC power source frequency and color night view. 1. Click [Camera] on the Setup page. 2. Set each parameter. • Clicking [Cancel] cancels your settings without saving changes.
  • Panasonic BL-C1CE | Ip Camera - Page 51
    Operating Instructions Setting White Balance AC Power Source Frequency Color Night View Description Select from the following options. • Auto (default) - Automatic adjustment • Fixed Indoor - Electric bulb (2800 K) • Fixed Fluorescent - White (3600 K) (White) • Fixed Fluorescent - Daylight
  • Panasonic BL-C1CE | Ip Camera - Page 52
    the images accordingly. IMPORTANT • It is important to limit access to the camera by use of a unique User Name and a secret Password. Because the camera is accessed through the Internet it is possible that the camera could be accessed by unknown individuals, including those who are commonly known as
  • Panasonic BL-C1CE | Ip Camera - Page 53
    the authentication window in camera access. All guest users can view images without a user name and password. Note If you set [Permit access from guest users], [Login] tab is displayed at the top of the page. After you log in as an administrator (see page 56), the Setup page and the Maintenance
  • Panasonic BL-C1CE | Ip Camera - Page 54
    the camera, the [Setup] and [Maintenance] tabs will not be displayed. • The user name and password are case sensitive. 3. Click [Save] when finished. • The new settings are saved. • When finished, "Success!" is displayed. 4. Click [Go to Security: Administrator page]. • The Security: Administrator
  • Panasonic BL-C1CE | Ip Camera - Page 55
    Instructions Administrator/General Users/Guest Users The camera has 3 user levels (administrator, general users and guest users). Items User Name and Password [Permit access from guest users (mobile only)] on the Security: Administrator page (see page 52) to allow access from guest users. [For assistance
  • Panasonic BL-C1CE | Ip Camera - Page 56
    Operating Instructions 3.2 Logging in to the Camera If you set [Permit access from guest users] on the Security: Administrator page, [Login] tab is displayed at the top of the page. After you log in as an administrator, the Setup page and the Maintenance page can be accessed. 1. Click [Login] tab at
  • Panasonic BL-C1CE | Ip Camera - Page 57
    Operating Instructions 3.3 Creating, Modifying or Deleting General Users The General access from guest users (mobile only)] on the Security: Administrator page, the access level can be set for guest users. Note For general users, the Setup and Maintenance tabs are not displayed. 1. Click [General
  • Panasonic BL-C1CE | Ip Camera - Page 58
    from the user name. • Retype Password: Reenter the password. • Enter ASCII characters (see page 131). Note that [Space], and [:] are not available. An access level is set for each general user. • Level 1 : Only the camera images can be viewed. • Level 2 : The camera images can be viewed and the
  • Panasonic BL-C1CE | Ip Camera - Page 59
    Operating Instructions 4 Buffering or Transferring Images 4.1 Procedures of Buffering or Transferring from the lists.) • No Transfer, No Memory Overwrite • No Transfer, Memory Overwrite • FTP • E-mail Save the settings to complete. E-mail Notification When Triggered Setting Save the settings
  • Panasonic BL-C1CE | Ip Camera - Page 60
    Operating Instructions 4.2 Buffering or Transferring Images by Timer The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. 1. Click [Trigger] on the Setup page. 2. Click a No. to enable buffer/transfer. 3. Check [Enable Image Buffer/Transfer], and select [Timer] for the
  • Panasonic BL-C1CE | Ip Camera - Page 61
    Operating Instructions Setting Trigger Description • Selecting [Timer] enables the camera to buffer/transfer images during the specified date and time by timer. • Selecting [Motion Detection] enables the camera to buffer/ transfer images when the motion is detected during the specified date and
  • Panasonic BL-C1CE | Ip Camera - Page 62
    cannot be set for a transfer to a cell phone. 6. Set the image buffer frequency, and click [Next>]. Note Due to the network environment, object and the number of simultaneous accesses, the camera may not record the number of images that you set. In this case, set the image buffer frequency longer
  • Panasonic BL-C1CE | Ip Camera - Page 63
    method, and click [Next>]. Operating Instructions • Clicking [
  • Panasonic BL-C1CE | Ip Camera - Page 64
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic BL-C1CE | Ip Camera - Page 65
    a login ID, set it (0-63 characters). If your ISP requires a password, set it (0-63 characters). Select the login setting for the FTP server. If you set [One Time] and the image buffer frequency value is set within 1 minute, the camera logs in to the server only once. This can reduce transfer time
  • Panasonic BL-C1CE | Ip Camera - Page 66
    Operating Instructions When you set [E-mail] for Transfer Method Select [E-mail], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic BL-C1CE | Ip Camera - Page 67
    Operating Instructions Setting SMTP Server IP • Address or Host Name*1 Port No. • Reply E-mail • Address*2 Destination E- • mail Address*2 1-3 Subject*2 • Text*2 • Description If you set a server IP address, set 4 numbers (0-255) and 3 periods, such as "192.168.0.253". Note that "0.0.0.0"
  • Panasonic BL-C1CE | Ip Camera - Page 68
    Instructions feature. Therefore, the camera uses the authentication of POP3 Server If you set a server IP address, set 4 IP Address or numbers (0-255) and 3 password on the SMTP server. Your ISP must support the SMTP authentication. Only the LOGIN and PLAIN authentication mechanisms are supported
  • Panasonic BL-C1CE | Ip Camera - Page 69
    Operating Instructions 8. Confirm the settings, and click [Save]. • The new settings are saved. • When all buffered images. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. [For assistance, please call: 1-800-
  • Panasonic BL-C1CE | Ip Camera - Page 70
    Motion Detection delays the frame rate of the camera. • A change to light or wind conditions may detect motions accidentally. • Motion Detection may not work in dark areas. • Objects moving fast may not be detected. 1. Click [Trigger] on the Setup page. 2. Click a No. to enable buffer/transfer
  • Panasonic BL-C1CE | Ip Camera - Page 71
    Operating Instructions Note • • • Click [Delete Buffered Images] to delete images already buffered. Click [ . Uncheck the Buffer/Transfer box to disable it. Trigger • Selecting [Timer] enables the camera to buffer/transfer images during the specified date and time by timer. • Selecting [Motion
  • Panasonic BL-C1CE | Ip Camera - Page 72
    Operating Instructions 5. Set the image settings, and click [Next>]. • Clicking [
  • Panasonic BL-C1CE | Ip Camera - Page 73
    Instructions 6. Set the image buffer frequency and the Motion deactivation time, and click [Next>]. Note Due to the network environment, object and the number of simultaneous accesses, the camera • Check the box to enable the setting. The camera buffers or transfers the image right after the motion
  • Panasonic BL-C1CE | Ip Camera - Page 74
    Operating Instructions Setting Motion deactivation time Description • Set the length of time recommended to prevent sending too many E-mails to a cell phone. • After detecting motions, the camera does not detect motions during motion deactivation time, so some images may not be captured. Note
  • Panasonic BL-C1CE | Ip Camera - Page 75
    method, and click [Next>]. Operating Instructions • Clicking [
  • Panasonic BL-C1CE | Ip Camera - Page 76
    Operating Instructions When you set [FTP] for Transfer Method Select [FTP], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic BL-C1CE | Ip Camera - Page 77
    a login ID, set it (0-63 characters). If your ISP requires a password, set it (0-63 characters). Select the login setting for the FTP server. If you set [One Time] and the image buffer frequency value is set within 1 minute, the camera logs in to the server only once. This can reduce transfer time
  • Panasonic BL-C1CE | Ip Camera - Page 78
    Operating Instructions When you set [E-mail] for Transfer Method Select [E-mail], and click [Next>]. The following page is displayed. • Clicking [
  • Panasonic BL-C1CE | Ip Camera - Page 79
    Operating Instructions Note • • The camera works only with an SMTP (Simple Mail Transfer • Address*2 Destination E- • mail Address*2 1-3 Subject*2 • Text*2 • Description If you set a server IP address, set 4 numbers (0-255) and 3 periods, such as "192.168.0.253". Note that "0.0.0.0" and
  • Panasonic BL-C1CE | Ip Camera - Page 80
    Instructions feature. Therefore, the camera uses the authentication of POP3 Server If you set a server IP address, set 4 IP Address or numbers (0-255) and 3 password on the SMTP server. Your ISP must support the SMTP authentication. Only the LOGIN and PLAIN authentication mechanisms are supported
  • Panasonic BL-C1CE | Ip Camera - Page 81
    Instructions 8. After you confirm the settings and click [Next>], set E-mail notification and click [Next>]. • If you select [Enable], the E-mail Notification When Triggered page is displayed. Enter the settings referring to page 78 - page 80. Setting Disable Enable Description • The camera
  • Panasonic BL-C1CE | Ip Camera - Page 82
    Operating Instructions 10. Click [Go to Trigger page]. • The Trigger page is displayed. Note • memory, the following operations also delete all buffered images. - Turning off the camera. - Saving the Date and Time page. - Restarting, updating firmware or resetting the camera to factory default. 82
  • Panasonic BL-C1CE | Ip Camera - Page 83
    Operating Instructions 4.4 Setting the Motion Detection The Motion Detection page allows you sensitivity high, the amplitude of the motion detection bar gets jumpy. 1. Click [Motion Detection] on the Setup page. 2. Click the Motion Detection bar in Threshold to set the threshold level. 3. Click the
  • Panasonic BL-C1CE | Ip Camera - Page 84
    Operating Instructions Threshold Note No responsibility will be taken by our company with such as surveillance, etc. What is the threshold? The threshold is the minimum value for the camera to detect motions on the image during the motion detection buffering. Setting the threshold lower allows
  • Panasonic BL-C1CE | Ip Camera - Page 85
    such as fluorescent light. In other cases, the motion detection function on the Network Camera Recorder may detect objects and brightness changes. The way to detect motion differs between the camera and the Network Camera Recorder. Additionally, if the object's color is similar to the color of the
  • Panasonic BL-C1CE | Ip Camera - Page 86
    Operating Instructions 4.5 Setting Sensor Log Notification A sensor log sent once a day at a specified time can be checked. To enable Sensor Log, set Motion Detection for Trigger Setting and check [Enable]. 1. Click [Sensor Log] on the Setup page. When enabling the image/buffer transfer setting and
  • Panasonic BL-C1CE | Ip Camera - Page 87
    Operating Instructions Setting A setup of • operation Time • SMTP Server IP • Address or Host Name*1 Port No. • Reply E-mail • Address*2 Destination E- • mail Address 13*2 Subject*2 • Description Sensor log operation can be set here. Set the day
  • Panasonic BL-C1CE | Ip Camera - Page 88
    Instructions feature. Therefore, the camera uses the authentication of POP3 Server If you set a server IP address, set 4 IP Address or numbers (0-255) and 3 password on the SMTP server. Your ISP must support the SMTP authentication. Only the LOGIN and PLAIN authentication mechanisms are supported
  • Panasonic BL-C1CE | Ip Camera - Page 89
    Other Features Operating Instructions 5.1 Changing Initial Settings on the Single Camera page or the Multi-Camera page The Image Display page allows you to change the initial settings (display settings when a user accesses the camera) for the Single Camera, Multi-Camera, Limit Continuous Motion
  • Panasonic BL-C1CE | Ip Camera - Page 90
    Operating Instructions Setting Description Image Resolution • Select the image resolution. 640 × 480 pixels (Only for the Single Camera page) 320 × 240 pixels (default) 160 × 120 pixels (Only for the Multi-Camera page) Image Quality • Select the image quality. [Favor Clarity] optimizes for good
  • Panasonic BL-C1CE | Ip Camera - Page 91
    Operating Instructions Setting Banner Display • Banner user • Image URL*1 • Link URL*1 Description When checked to [Enable], the setting will be enabled. When unchecked, the setting will be disabled. Note • • When the Banner Display is enabled, the camera accesses the Image URL every time the
  • Panasonic BL-C1CE | Ip Camera - Page 92
    Operating Instructions 5.2 Configuring Multiple Cameras The Multi-Camera Setup page allows you to configure camera IP addresses and camera names to view multiple images on the Multi-Camera page. These configurations are required to use the Multi-Camera page. Up to 12 cameras can be configured. The
  • Panasonic BL-C1CE | Ip Camera - Page 93
    your local network, use each camera's local IP address and port number. • If you intend to access your camera from the Internet, you must use each camera's host name (global IP address) and the port number. 4. Click [Save] when finished. • The new settings are saved. • The Multi-Camera Setup page is
  • Panasonic BL-C1CE | Ip Camera - Page 94
    Operating Instructions 5.3 Specifying Operation Time The Operation Time page allows you to limit the time that the camera is in use. The camera image is set incorrectly. Confirm the time period after the setup. • If you access the camera as an administrator, you can view the image outside the time
  • Panasonic BL-C1CE | Ip Camera - Page 95
    Operating Instructions Setting Enable • Day of the week • Operation Time • Description Check the box to enable , if Monday or Tuesday is disabled in a setting but enabled in other settings, the camera can be operated on both Monday and Tuesday. [For assistance, please call: 1-800-272-7033] 95
  • Panasonic BL-C1CE | Ip Camera - Page 96
    [Indicator Control] on the Setup page. 2. Select an option. Setting Turn indicator • on when camera is on. Turn indicator • on during camera access. Never turn • indicator on. Description The indicator always turns on or blinks. See page 3 and page 4 of Troubleshooting on the CD-ROM. The
  • Panasonic BL-C1CE | Ip Camera - Page 97
    [For BL-C20A] Displays wireless information (see page 98). Wireless Status (3) Session Status Displays information on access to the camera (see page 98). (4) Sensor Log Displays sensor logs (see page 99). (5) Restart Restarts the camera (see page 99). (6) Update Firmware Updates the camera
  • Panasonic BL-C1CE | Ip Camera - Page 98
    of the camera. The status information provides support for troubleshooting. Clicking [Status] displays the following page. Note See the Panasonic Network Camera support website at http:// panasonic.co.jp/pcc/products/en/netwkcam/ for details about status information. 6.1.2 [For BL-C20A] Confirming
  • Panasonic BL-C1CE | Ip Camera - Page 99
    can also be restarted on the Restart page. Note When the camera is restarted, the buffered images and sensor logs will be deleted. 1. Click [Restart] on the Maintenance page. 2. Click [Restart]. • Restarting takes about 1 minute for BL-C1A or about 90 seconds for BLC20A. The Top page is displayed
  • Panasonic BL-C1CE | Ip Camera - Page 100
    page. 1. Download the new firmware from the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/, and save it on your PC. 2. Click [Update Firmware] on the Maintenance page. 3. Click [Update Firmware]. • The procedure can take up to 7 minutes for BL-C1A or
  • Panasonic BL-C1CE | Ip Camera - Page 101
    Operating Instructions • The Update page is displayed after about 1 minute for BL-C1A or 90 seconds for BL-C20A. The firmware update process takes about 6 minutes for BL-C1A or 7 minutes for BL-C20A. 4. Click [Browse...]. • A dialog box is displayed to select the firmware. 5. Select the firmware (
  • Panasonic BL-C1CE | Ip Camera - Page 102
    Operating Instructions 7. Confirm that the version number on the Top page is updated. Updated version • If the version number is updated, the firmware update is complete. 102
  • Panasonic BL-C1CE | Ip Camera - Page 103
    2. Click [Save]. 3. Click [Save] on the File Download dialog box. 4. Specify the location, and click [Save] update the camera, create a configuration file after updating the firmware. If there is a firmware version difference between the camera that you create a configuration file from and the camera
  • Panasonic BL-C1CE | Ip Camera - Page 104
    default, the camera can load previously used settings from a configuration file. Note • The configuration file also saves network settings. When settings are loaded, the network settings are also loaded. • If you try to update the camera, create a configuration file after updating the firmware
  • Panasonic BL-C1CE | Ip Camera - Page 105
    a wired connection and set up the wireless configuration. (For BL-C20A, see Getting Started.) 1. Click [Reset to Factory Default] on the Maintenance page. 2. Click [Execute]. • The indicator blinks orange, and then turns off for 5 seconds. • All camera settings (user name, password, IP address
  • Panasonic BL-C1CE | Ip Camera - Page 106
    Operating Instructions 6.2 Support page (1) (2) (3) (4) Support (1) Help (2) [For BL-C20A] Wireless Help (3) Product Information (4) Support Information Displays the Help page (see page 106). Displays the Wireless Help page (see page 107). Displays the product information website (see page 107).
  • Panasonic BL-C1CE | Ip Camera - Page 107
    displays the URL, click it. Note If the camera is not connected to the Internet, the website cannot be displayed. 6.2.4 Support Information See the Panasonic Network Camera support website for product information. Clicking [Support Information] on the Support page displays the URL, click it. Note If
  • Panasonic BL-C1CE | Ip Camera - Page 108
    your user name and password, use this button to reset the camera. To restore the wireless connection, access the camera by using a wired connection and set up the wireless configuration. (For BL-C20A, see Getting Started.) • To reset the camera, press the FACTORY DEFAULT RESET button for 1 second
  • Panasonic BL-C1CE | Ip Camera - Page 109
    Information Operating Instructions 7.1 Default Setting List Basic Items Default Required Note Network Connection Mode Automatic Setup - Automatic Setup/ Static/DHCP Allow Access from the No - - Internet (Automatic Setup only) Network Configuration Enable - - from Setup Program
  • Panasonic BL-C1CE | Ip Camera - Page 110
    Operating Instructions Items Default Required Note Wireless Communication mode 802.11b/g - - [For BLC20A] (Channel) Auto - - - - My Network Places Dynamic DynamicDNS DNS Disable - Viewnetcam.com/ User-specified DynamicDNS/ Disable DynamicDNS Server URL Updating time [Blank]
  • Panasonic BL-C1CE | Ip Camera - Page 111
    Operating Instructions Items Default Required Note Date and Time Setting Time Automatic Time Camera Camera Name Network Camera Required 1-15 characters *6 White Balance Auto - Auto/Fixed Indoor/ Fixed Fluorescent (White)/Fixed Fluorescent (Daylight)/Fixed Outdoor AC Power
  • Panasonic BL-C1CE | Ip Camera - Page 112
    Instructions Account Items Default Required Note Security: General Do not permit - - Administrator Authentication access from guest users User Name [Blank] When setting 6-15 characters administrator *3 Password [Blank] When setting 6-15 characters administrator *3 Retype Password
  • Panasonic BL-C1CE | Ip Camera - Page 113
    Buffer/Transfer Trigger Items Status Trigger Default Off Timer Active Time of Trigger Image Setting ( Memory Overwrite Disable Motion Threshold Detection Sensitivity Third blocks from the left Center Operating Instructions Required - - - - When selecting Motion Detection - Note - Timer/
  • Panasonic BL-C1CE | Ip Camera - Page 114
    Operating Instructions Sensor Log Items A setup of operation Active Time Time Notice setup of a sensor log Port No. (SMTP) Port No. (POP) Subject How to authenticate Default Required Note Disable When selecting Motion Detection in Trigger. Disable/ Enable(When there is no newarrival sensor
  • Panasonic BL-C1CE | Ip Camera - Page 115
    Advanced Operating Instructions Image Display Items Single Camera Image Resolution Single Camera Image Quality Single Camera Refresh Interval Multi-Camera Image Resolution Multi-Camera Image Quality Multi-Camera Refresh Interval Limit time of Continuous Motion JPEG Refresh Interval Language
  • Panasonic BL-C1CE | Ip Camera - Page 116
    Checked When setting - Multi-Camera selfcamera When setting IP address*1 Multi-Camera Host name*5 is 1-255 characters. -- When setting 20, 21, 25 and Multi-Camera 110 are not available.*2 BL-C1A When setting 1-15 characters (For BL-C1A) Multi-Camera *7 BL-C20A (For BL-C20A) From No.1 To No
  • Panasonic BL-C1CE | Ip Camera - Page 117
    Operating Instructions *1 Set 4 numbers (0-255) and 3 periods, such as "192.168.0.253". Note that "0.0.0.0" and "255.255.255.255" are not available. *2 Set the number of 1-65535. *3
  • Panasonic BL-C1CE | Ip Camera - Page 118
    Operating Instructions 7.2 Cleaning Only clean the camera after it has been turned off by disconnecting the AC cleaner, pesticide or hair spray. They may cause change in the shape or color of the camera. Do not directly touch the lens. Fingerprints may cause an unclear image. 7.2.2 Cleaning the
  • Panasonic BL-C1CE | Ip Camera - Page 119
    Instructions 7.3 Setting an IP Address on Your PC Your PC's IP address can be assigned by following the procedures below. 1. Display the TCP/IP Properties window. • The steps are different depending on your OS. OS Steps Windows XP [Start] ( [Settings]) [Control Panel] [Network and Internet
  • Panasonic BL-C1CE | Ip Camera - Page 120
    PC. • If the Panasonic Network Camera Setup window does not appear, click "setup.exe" on the CD-ROM. 2. Click [Camera Setup]. Displays version information about this program. Sets up the camera. Displays the camera manuals. If your PC does not have Adobe® Acrobat® Reader®, install it from the Adobe
  • Panasonic BL-C1CE | Ip Camera - Page 121
    Instructions • If the following dialog box is displayed, click [Unblock]. • You can find the camera IP address and port number by looking up the MAC address of your camera. MAC Address Port IP No. Address Camera Status Camera List window Note • • When trying to find multiple cameras
  • Panasonic BL-C1CE | Ip Camera - Page 122
    Operating Instructions Automatic Setup (Local or Internet Access) or Manual Setup 1. Click [Execute] on the Camera List window shown on page 121. 2. Click the corresponding button. Sets up the camera to be viewed on the LAN. Sets up Internet access to the camera. Manually sets up the camera.
  • Panasonic BL-C1CE | Ip Camera - Page 123
    Operating Instructions Manual Setup window Set up each parameter referring to page 33-page 35. • If more than 20 minutes have passed since the camera was turned on, the camera cannot be set up from the Setup Program. If the camera cannot be set up, restart the camera. • If "Camera setup completed"
  • Panasonic BL-C1CE | Ip Camera - Page 124
    Operating Instructions Setting up the Camera Using the MAC Address on the Setup Program The Setup Program may not list any cameras due to your firewall or antivirus software settings on your PC. If you cannot disable your firewall or antivirus software, you can set up the camera using the camera MAC
  • Panasonic BL-C1CE | Ip Camera - Page 125
    name and password that you set above, and click [OK]. 5. When the Single Camera page is displayed, the setup is complete. • If a Security Warning window is displayed, click [Yes]. (See page 14) • See page 15 for Security Warning window when using Microsoft Windows XP Service Pack 2. 6. [For BL-C20A
  • Panasonic BL-C1CE | Ip Camera - Page 126
    Register with the DynamicDNS service on the DynamicDNS page (see page 42). 3. Confirm that the camera can be accessed from the Internet (see page 10). If you cannot access the camera, see page 9 of the Troubleshooting on the CD-ROM. When you are using a router that does not support UPnP™ Follow the
  • Panasonic BL-C1CE | Ip Camera - Page 127
    . Note • • • A proxy server is used to protect your network when connected to the Internet. If the camera is accessed via a proxy server, problems may occur. Consult your network administrator before installing the camera. If the camera is accessed via a proxy server, the refresh interval may be
  • Panasonic BL-C1CE | Ip Camera - Page 128
    Operating Instructions 3. Click the [Connections] tab, and click [LAN Settings]. 4. See if the Use a proxy server for your LAN check box is checked or not. If checked,
  • Panasonic BL-C1CE | Ip Camera - Page 129
    Operating Instructions 5. Enter the camera's IP address into the Do not use proxy server for addresses beginning with data field. (Example: 192.168.0.253) 6. Click [OK]. [For assistance, please call: 1-800-272-7033] 129
  • Panasonic BL-C1CE | Ip Camera - Page 130
    Operating Instructions 7.5.2 Setting UPnP™ to Display Camera Shortcut in My Network Places To display the camera shortcut in the My Network Remove Programs] [Add/Remove Windows Components] Select [Networking Services] [Details] Check [Internet Gateway Device Discovery and Control Client] and [UPnP
  • Panasonic BL-C1CE | Ip Camera - Page 131
    ASCII Character Table 0 @ P ` 1 A Q a 2 B R b 3 C S c 4 D T d 5 6 E F U V e f 7 G W g 8 H X h 9 I Y i : J Z j ; K [ k < L \ l = M ] m > N ^ n ? O _ o Operating Instructions p q r s t u v w x y z { | } ~ [For assistance, please call: 1-800
  • Panasonic BL-C1CE | Ip Camera - Page 132
    Operating Instructions 7.7 File Size and Number of Buffered Images The following table images are saved on the internal memory, even if images cannot be transferred due to server or network failure, the maximum number of buffered/transferred images will remain the same. Example Image Resolution: 320
  • Panasonic BL-C1CE | Ip Camera - Page 133
    Operating Instructions The number of enabled settings The maximum number of buffered images for each setting 1 2 3 4 5 About About About About About 250 120 80 60 50 When [
  • Panasonic BL-C1CE | Ip Camera - Page 134
    Operating Instructions Example The maximum number of buffered images for each setting (A): About 250 images The maximum number of [Enable Pre-trigger Image Buffer] images (B): About 80
  • Panasonic BL-C1CE | Ip Camera - Page 135
    (320 × 240 or 160 × 120) TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, UPnP™ Timer or Motion Detection SMTP*3, FTP Wired: 10Base-T/100Base-TX Ethernet RJ-45 connector × 1 Wireless: IEEE 802.11b/g (Embedded) (only BL-C20A) [For assistance, please call: 1-800-272-7033] 135
  • Panasonic BL-C1CE | Ip Camera - Page 136
    Operating Instructions Other Specifications Items Indicator Display Dimension (HWD) Weight Power Supply Temperature Humidity Specifications Power/Network Communication/Camera operation/ Ethernet link BL-C1A About 85 mm (3 3/8 inches) × About 85 mm (3 3/8 inches) × About 25 mm (1 inch) BL-C20A
  • Panasonic BL-C1CE | Ip Camera - Page 137
    Operating Instructions [For BL-C20A] Wireless Specifications Items Communication mode (Communication Standard) Data Transfer Mode Frequency Range Channel Security Specifications IEEE 802.11b, 802.11b/g, 802.11g exclusive IEEE 802.11b: Direct Sequence Spectrum Spread (DS-SS) IEEE 802.11g:
  • Panasonic BL-C1CE | Ip Camera - Page 138
    Operating Instructions Index 138
  • Panasonic BL-C1CE | Ip Camera - Page 139
    page 97 Motion Detection 70, 83 Multi-Camera page 20 Multi-Camera Setup page 92 N Network page 31 O Operation Bar 19 Operation Time page 94 P Product Information page 107 R Reset to Factory Default page 105 Restart page 99 S Save Settings page 103 Security: Administrator page 52 Sensor Log 86, 99
  • Panasonic BL-C1CE | Ip Camera - Page 140
    Operating Instructions Trademarks 3 U Update Firmware page 100 UPnP page 39 W WEP 37 Wireless Help page 107 Wireless page 36 Wireless Status page 98 140
  • Panasonic BL-C1CE | Ip Camera - Page 141
    For product service Panasonic Servicenters are listed in the servicenter directory. Call 1-800-272-7033 for the location of an authorized servicenter. This Network Camera is designed for use in the United States of America. Sale or use of this product in other countries/areas may violate local laws.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
Operating Instructions
Please read this manual before using, and save this manual for future reference.
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
BL-C1A
BL-C20A
Network Camera
Indoor Use Only
Model No.
BL-C1A
BL-C20A
Wired Type
Wireless/Wired Type