Panasonic DMPBDT220 DMPBDT220 User Guide - Page 26

∫ Still Mode (paused video) Select the type of picture shown when you pause playback. Auto Field Frame Automatically selects the type of picture shown. Select if jittering occurs when "Auto" is selected. Select if small text or fine patterns cannot be seen clearly when "Auto" is selected. ∫ Seamless Play The chapter segments in playlists are played seamlessly. ≥ Select "On", when the picture freezes for a moment at the chapters segment in playlists. ∫ Black Level Control Select lighter or darker for adjusting the black level to the desired setting for picture enhancement. Audio ∫ Sound Effects (> 24) ∫ Dialog Enhancer (> 24) ∫ Dynamic Range Compression You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) ≥ "Auto" is effective only when playing Dolby TrueHD. ∫ Digital Audio Output Press [OK] to show the following settings: ¾Dolby D/Dolby D +/Dolby TrueHD ¾ DTS/DTS-HD Select the audio signal to output. ≥ Select "PCM", when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment. ≥ Not making the proper settings may result in noise. ¾ BD-Video Secondary Audio Select whether or not to mix the primary and secondary audio (including the button click sound). If "Off" is selected, the unit outputs the primary audio only. ¾ HDMI Audio Output This setting selects whether or not to output audio from HDMI. ≥ Select "Off" when the TV is connected to this unit via an HDMI terminal, and this unit is also connected to other devices, such as an amplifier/receiver via an OPTICAL terminal. ∫ PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the DIGITAL AUDIO OUT. ≥ If "On" is selected, the signals that are converted to 48 kHz are output. ≥ If "Off" is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally. ≥ Signals are converted to 48 kHz despite the settings in the following cases: - when the signals have a sampling frequency of 192 kHz - when the disc has copy protection - when "BD-Video Secondary Audio" is set to "On" ∫ Downmix Select the downmix system of multi-channel to 2-channel sound. ≥ Select "Surround encoded", when the connected equipment supports the virtual surround function. ≥ There is no effect on "Bitstream" via HDMI AV OUT and DIGITAL AUDIO OUT. ≥ The audio will be output in "Stereo" in the following cases: - AVCHD playback - Playback of secondary audio (including the button click sound). ∫ Audio Delay Synchronization between picture and sound is corrected by adjusting the delay time of the audio output. 26 VQT3V20