Panasonic DMREZ485V Dvd Recorder - English/spanish - Page 26

Advanced Recording Specifying the Recording Time [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [VHS] Digital broadcasts cannot be recorded to video tape. This function allows specifying the length of recording time up to 4 hours. During recording REC repeatedly until the desired time is reached. − The recording time and the unit's display changes as follows: Counter (Cancel)  OFF 0:30  OFF 1:00   OFF 4:00 OFF 1:30  OFF 3:00  OFF 2:00  Playing while you are recording  You can play DVD or VHS while recording to the other drive. The recording will not be affected − DVD playback ( 17) − VHS playback ( 17) Notes  During playing while you are recording, you cannot edit or delete recordings.  You cannot play a tape with the DVD PRIORITY output terminals or HDMI AV OUT terminal while recording or making a scheduled recording on a disc ( 70). Closed captions will not appear during simultaneous recording and playback. Use caution while operating the controls for playback. Pressing [ STOP] when the recording device is selected will cancel the recording in progress. Chasing Playback [RAM] Allows playback from the beginning of what you are recording. Notes This function does not work during scheduled recording or Flexible Recording. Recording stops and the set time is cleared if you press [ STOP]. The unit turns off automatically when the time to stop recording is reached as long as you do not operate the unit. Flexible Recording [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] The unit sets the best possible picture quality that fits the recording within the remaining disc space. The recording mode becomes FR mode. Refer to "FR (Flexible Recording)" ( 24). With the unit stopped F Rec Flexible Recording Record in FR mode. Max recording time 08 Hour 00 Min. Set recording time 08 Hour 00 Min. Start Cancel When recording to DVD-RAM PLAY (at least 20 seconds after recording starts). − If the "Status Messages" in the Setup menu is set to "Automatic" ( 62), both "Play" and "Rec." indicators will be displayed on the status message screen for several seconds. Tips To stop play Press [ STOP] once. To stop recording Press [ STOP], at least 2 seconds after chasing playback stops. Simultaneous Record and Playback [RAM] Allows playback of a previous recording, while recording something else. ,  to select "Hour" and "Min." and ,  to set the recording time. When recording to DVD-RAM When you want to start recording to select "Start", then OK − Recording starts. Tips To exit the screen Press [RETURN]. To stop recording partway Press [ STOP]. To show the remaining recording time Press [STATUS] to show the remaining recording time. DVD-RAM Rec. 0:59 Remaining time CH 20 26 Stereo RQT9056 to select the recording to play, then OK − If the "Status Messages" in the Setup menu is set to "Automatic" ( 62), both "Play" and "Rec." indicators will be displayed on the status message screen for several seconds. Tips To stop play Press [ STOP]. To exit the DIRECT NAVIGATOR screen Press [DIRECT NAVIGATOR]. To stop recording After play stops 1.Press [DIRECT NAVIGATOR] to exit the screen. 2.Press [ STOP].