Panasonic DMREZ485V Dvd Recorder - English/spanish - Page 38

Advanced Video Cassette Playback S-VHS Quasi Playback (SQPB) This unit can play tapes recorded in S-VHS.  Some picture noise may occur depending on the type of tape used.  It is not possible to fully obtain the high resolution S-VHS is capable of.  This unit cannot record in S-VHS. Repeat Playback When the tape reaches the end of the program, it will automatically rewind to the beginning and play again. During playback or while stopped PLAY Press and hold for about 5 or more seconds. - Repeat Playback goes on indefinitely until you cancel it. - The "RPt" indication appears on the unit's display. - Press [ STOP] to stop play. Notes Only works if there is at least 5 seconds blank space at the end of the program. Changing Audio during Playback AUDIO A repeatedly, to select the audio option. Adjusting the playback picture Manual Tracking The unit usually makes tracking adjustments automatically, but you may need to do it manually if noise appears on a tape recorded on other equipment. During playback TRACKING/V-LOCK TRACKING/V-LOCK CH CH or - Repeat until the picture noise disappears. To return to auto tracking: TRACKING/V-LOCK CH (simultaneously). Tips To remove the noise from a paused picture: Start slow play ( 37), then adjust the tracking. Notes This function may not work with some tapes. You can also adjust the tracking with [CH , ] on the main unit. Vertical Locking Adjustment Adjust the vertical synchronization to stop the picture from shaking while paused. Stereo Mono L Mono R  No display (Normal audio track)  While paused TRACKING/V-LOCK TRACKING/V-LOCK Tips Auto Bilingual Selection Function [VHS] When a stereo broadcast or multilingual broadcast is recorded and played back on the unit, stereo sound will be automatically selected in the case of a stereo broadcast and SAP sound will be automatically selected in the case of a multilingual broadcast. - This function may not work properly if the program is played back from a mid point. In a case like this, press [AUDIO] and select the right sound. - The function will not work with a cassette which has been recorded from external equipment. CH CH or - Repeat until the shaking stops. To return to the standard position: TRACKING/V-LOCK CH (simultaneously). Notes This function may not work with some tapes. You can also adjust vertical synchronization with [CH , ] on the main unit. 38 RQT9056